X-Racer KL-EX90 Micro Racing Quad BNF

This is the KL-EX90 and it is a 2" propeller 90mm class frame. 

Just because the size is small does not mean that it is lacking power. This tiny beast is capable of running on 3s motors and most recently it was used in Shanghai to race against some of the top pilots in the world all while they were using 250mm sized quads.  It also has been a proven winner of micro class at race track while our team pilot Kakei Leung  got the 1st place at Hongkong Mini Class Drone Race.

This frame is equipped with the very well accepted Gemfan BN2035 propellers and uses the flycolor S-Tower which incorporates betaflight OSD, F3 flight controller, and 4 in one ESCs. The Dragonfly MC1105 6000kv motors have been getting rave reviews and are also used on this frame. We dont stop there though, with this build you can say goodbye to those nasty little 2 dollar board cameras . Weve made this one standard to use the Run Cam micro swift which is much more expensive than the cheap cameras but the picture quality is well worth the extra details. 

Coming in two options, either BNF combo or a build it yourself DIY package. If you prefer a DIY, click here. 

Features:

• Small in size and light in weight. All-up-weight is 106 grams only with a 2S 550mAh lipo battery. Do not require the hassles of getting it registered with the FAA if you are from the United States.
• 2s / 3s lipo. Excellent power with just a 2S battery, even more powerful with 3S. It gives you very high speed, very precise and rail-like handling.
• Fast as other larger racing quads. Our team pilot Ka Kei Leung finished the drone race at WMC 2017 in 9.65 sec. Click to watch the video.
• Use Runcam Micro Swift, the worlds smallest and lightest CCD professional camera. It has the same performance to reputable Runcam Swift and Swift Mini.
• The reputable Flycolor RAPTOR S-Tower of F3 FC and 4-in-1 BLHeli_S 2-3S ESC gives you extremely good stability and flight performance.
• Equipped with powerful micro Dragonfly MC1105 brushless motors. Works great with Gemfan BN2035 propellers and Flycolor RAPTOR S-Tower.
• A Dragonfly 25mw 48ch Vtx with protective coating is inlcuded to give an even more aero dynamic low profile design for the video transmission. 
• The flight controller is with built-in OSD.
• The design is inspired by the champion KL200Race racing drone. Much smaller in size, but gives you the same flying experience of professional 200 and 210 class racing drones.

Package including:

• 1 x KL-EX90 Frame
• 4 x Dragonfly MC1105 6000kv Micro Class Racing Motor
• 1 x Flycolor RAPTOR S-Tower
• 1 x RunCam Micro Swift FPV Camera
  
• 1 x Dranonfly5.8g25MW 48CH
• 8pairs x GemFan 2035BN 4-Blade Propellers
• 1 x Orignal Amass XT30 Plug Male
• 1 x CJMCU WS2812 5050 RGB LED Board
• 1 x 3D Prints Camera Mount
• 1 x 3D Prints Taillight Mount
• 20 x M2*4 Screws
• 12 x M2*6 Screws
• 8 x Motor Screws

X-RACER KL-EX90 Installation Instructions, Click Here.

The KL-EX90 is a 2" propeller 90 class airframe built for micro class FPV racing. All-up-weight is just about 106 grams with a 2S 550mAh lipo. Because it is so small in size and so light in weight that under 250g, you do not need to register with FAA if you are from the United States to fly the KL-EX90.

Four colors available for the 3D printed parts to show your personality and stand out from the crowd. We will send the white version if without instruction. If you prefer another color, please let us know.

Compact design, suitable for both indoor and outdoor FPV. Equipped with F3 Flight Controller, 4-in-1 ESC,  powerful 1105-6000kv motors, Runcam Micro Swift FPV camera, Dragonfly 25mw 48ch vTX and LED light, all these have made the KL-EX90 perfect for both LOS and FPV flyers. 

A Dragonfly 25mw 48ch Vtx is inlcuded to give an even more aero dynamic low profile design for the video transmission. The 48CH allows several flyers to race at the same time without worry about the signal interference during racing. The VTX is not directly put on the top plate, but into the hollow part of top plate for a better protection. It comes with protective coating to prevent from moisture ingress, while still easy for the users to shift the channels and less heat.

The KL-EX90 uses reputable Flycolor RAPTOR S-Tower of F3 FC and 4-in-1 BLHeli_S 2-3S ESC gives you extremely good stability and flight performance.

Use Runcam Micro Swift, the worlds smallest and lightest CCD professional camera. It has the same performance to the well-known Runcam Swift and Swift Mini.

Equipped with powerful micro Dragonfly MC1105 6000kv brushless motors. Works great with Gemfan 2035BN propellers and Flycolor RAPTOR S-Tower. 

The Gemfan 2035BN propellers are extremely durable and smooth. Here we include three more sets in the BNF, so you will never need to worry about the damage to the props.

For the users who are new to FPV, we have an option of with prop protection cover. It will greatly reduce the damage to KL-EX90 in case there is a hard crash.

The design of KL-EX90 is inspired by the champion KL200Race racing quad. Much smaller in size, but gives you the same flying experience of professional 200 and 210 class racing drones.