Sorted:
  • Tarot ZYX-M Flight Controller for multi-copter ZYX25

    Update on Dec. 3rd, 2015: Add the V1.01 upgrade to V1.04 manual.The revolutionary flight controllerWith multiple new technologies, Tarot ZYX-M simplifies all complicated operation and brings you easy and natural flight experiences.To upgrade the flight features, ZYX-M is equipped with smart computing and navigation control systems. Pilots can adjust tilt, roll, and pan axis through setup software according to different preferences.Furthermore, it supports fail safe and voice alarm, including range setting and no-fly zone alarm. ZYX-M keeps the multi-copter under control during flights. Main controller:32 bit processorBuilt-in anti-vibration sensorFull metal caseSupports dual S-BUS receiverSupports dual DSM satellite receiverSpecific Interface for TAROT gimbal controlGPS module:Highly efficient GPS receiverHigh gain antennaFast and accurate locatingPMU module:Dual power outputSupports power output to flight controller, gimbal, and video TX in the same timeIntegrated voltage testLow voltage alarmLED indicator:Indicates the multi-copter status in real-timeStandard accessory: USB moduleFeatures:Support 9 kinds of multi-copter. With 3 servo ports for higher compatibilityAccurate speed control under GPS mode:Under GPS flight mode, the flight speed is proportionally equal to joystick movement, and the level speed is proportionally equal to throttle stick movement. Failsafe, one key go-home, IOC(Intelligent Orientation Control), POI(Point of Interest):If the multi-copter lost the signal, it can return to launch and land. When the signal works normally, pilot can pull and switch and activate one key go-home. Smart retractable landing gear:Once activate the feature, the landing gear will automatically extend in emergency case (ex: auto-landing). Pilot can control the landing gear through radio transmitter after flight height exceeds 5 meters. Flight range programmable and no-fly zone protect:Under GPS flight mode, the multi-copter will fly inside the setting range only. Under other flight mode, once the multi-copter fly outside the setting range, the auto return-to-launch will be activated. In places near airport and no-fly zone, the flying height and range are restricted. Prop failsafe (Hex-copter or above)For Hex or above copters, when one of the motor or prop doesn’t work, the multi-copter will fly normally.  

    $129.90 $120.81, Save 7% OFF

    SKU:ZYX25

    Weight: 0.50 kg

  • TAROT T960 FPV ARF Combo

    This is a Tarot T960  Hexacopter FPV RTF.Features include a NAZA-M V2 flight controller combo, 6 hobbywing  X-rotor 40A ESCs, 6 high end FPVMODEL MC4014 kv340 motors(recommended),one 6s DUPU 10000Mah 25C lipo batteries,one 3s 850mah battery for TX,15x50 carbon fiber props,a iosd mini,a DJI BTU module,a TS832 600mw TX,a FeelWorld 7 inch 5.8GHz  FPV Monitor(no blue screen),a Tarot gopro gimbal, a T960 landing skid and a DEVO10 transmitter set with 2200mah 3s battery.All of these features of our RTF product have been tuned,you just need to connect to TX then power up and fly. The flight times can be expected to reach up to 20 minutes. Get busy flying and let us do the build work!!  (Want a different parts? Contact us for the price difference)Your package inludes ( Due to the airline regulation, the batteries will be shipped seperately)1X Tarot T960 frame kit1X TAROT T960 Landing skid1X TAROT 2axis gimbal1x Naza-m v2 Set6x HOBBYWING X-rotor 40a ESC6 x FPVMODEL MC4014 KV340 motor (cw+ccw)1 x DUPU 6s 22.2V 10000mah 25C battery1 x DUPU 3S 850mah battery4 pairs x 1550 carbon fiber props (one pair for spare)1 x DJI iOSD mini1 x DJI BTU module1 x TS832 600mw TX1 X FEELWORLD 7inch FPV Monitor with 5.8g receiver (NO BLUE SCREEN) (The screen battery isnt included)2 X TAROT battery plate 1x Tarot battery holder 1x DEVO 10 transmitter with 2200mah 3s batteryPlugs, cables, wires, shrink tubing etc.The  ARF combo,it includes everything we listed and all the small accessories you need for your T960 building work,you have to assemble it yourself.

    $2,599.00 $2,209.15, Save 15% OFF 2

    SKU:T960RTF

    Weight: 14.00 kg

  • TAROT T15 Folding Octocopter Frame kit Tl15T00

    Tarot T15 folding octocopterProduct Features :    Widely used in UAV aerial photography , remote sensing, mapping, airborne reconnaissance , disaster monitoring, cable transmission line , and other agricultural plant protection for mobile high performance requirements, equipment containing material and requires a longer endurance of blank applications .    Specifically designed to meet 5DII, RED EPIC, C300, FS100, FS700 and large video equipment developed by professional aerial vehicle.    T15 eight- axis folding rack overall net imports of Toray carbon fiber 3K woven by high temperature and pressure prefabricated full CNC precision machining, pure carbon 2.5MM thick matte twill carbon fiber quality beyond conventional commercially available products, with flatness, weight light , creep resistance , high compressive strength and shock resistance and other characteristics , the overall performance beyond the state required standard level performance metrics . Full body matte finish to prevent sunlight reflecting the impact of camera effects . Folding lines can be directly equipped with safe, reliable, avoidthe use of connectors to connect the circuit caused by an accident.    T15 eight- axis folding rack removable battery holder uses  detachable design allows the battery when you receive a shock from the body , reducing the potential impact on the body damage. Bit -shaped designprevents the battery tie off . Multiaxial metal locking clip seat folded portion innovation adoption ¢ 40 Falcon riveted metal dovetail design , with a strong clamping force , its strength is higher than the transverselocking fixed carbon tube locking strength. Excellent damping slip feel unusual feeling when you bring quick fold .    Folding rack full thread structure using carbon nanotubes which have a unique design self-locking screw technology, with excellent resistance to lateral vibration . Lightweight two-tone multi rotor motor mount CNC machining , the overall design has a strong perspective effect, providing a striking visual direction for the body in the air. Carbon nanotube metal bracket connecting point damping design dovetail groove metal hook thread with full carbon tube phase, with excellent adhesion.Standard mount rod diameter Φ12MM, applicable to all mount rod center distance 155MM PTZ used.Standard GPS antenna quick folding seat , folding carry more convenient.Eight- standard high-current slip the lock gilded hub.Standard multi-axis folding tripod more convenient to carry . TAROT T15 recommended configuration:DJI WOOKONG-M flight controller8x T-motor MN4014 KV400  8x T-motor 30A pro ESC / HOBBYWING 30A pro ESC4 pairs x 1555 C/F CW/CCW propeller 1x DUPU 6s 25c 10400mah battery Parameter configuration requirements :Tube diameter : 25MMWheelbase : 1020MMRack Diameter : 1070MMTotal height : 420CMCenter Cover Size : 301 × 209 × 2.5MMMotor mounting pitch : 16MM/19MM/25MM/27MM equilateral triangle installationRotor Size: 15-inch carbon fiber propeller TL2831/TL2813/TL2812Brushless Motor : 4114/320KV multiaxial brushless motor TL100B08-02/TL100B08-01Battery Specifications : 6S 22.2V 10000-15000MHA:35-40A Brushless ESCStandard mount rod diameter Φ12MM, applicable to all mount rod center distance 155MM PTZ UseEffective allocation of the whole weight : 11KGEight fold axis rack Weight : 1.95KGSpecifications:T15/T18 quick release battery holder TL15T01 × 2T15/T18 seat post quick release aluminum group TL15T02 × 2T15/T18 metal reinforcing plate TL15T03 × 1T15 folding frame full carbon tubes TL15T04 × 4Tarot T15 folding frame full carbon tubes TL15T05 × 4Tarot T15/T18 eight fold axis bracket TL15T06 × 2T15 folded eight shaft cover TL15T07 × 1GPS folding bracket TL15T08 × 1T810/T960 six-axis folding tripod TL96013 × 1Multi-axis limit gasket / four loaded TL96021 × 4T810/T960 head mount kit TL96014 × 1Eight- hub group TL100B14 × 1Multiaxial metal locking clip holder TL9605 × 8New Φ25MM motor mount / Orange TL9602 × 2New Φ25MM Motor Mount / Black TL9603 × 6Titanium diamond file × 1Water sticker group × 8Colored sticker set point × 2Magic sticky × 2Manual × 1Spare screw pack × 1Packaged × 1Related Part Number:M4 screws TL9606 aluminum butterflyM3 head nut / Gold TL100A02-02Φ25MM Carbon single battery holder group TL80B04Φ25MM Carbon dual battery holder group TL80B05Tarot T810/T960 under -mount dual battery holder TL96018Tarot battery shockproof paste TL2770Flight control board spare screws TL2778-015-Series multi-rotor brushless motor TL100B08Hanging next T810/T960 battery holder group TL96015Side panels, hood edge protector TL2768

    $649.00 $629.53, Save 3% OFF

    SKU:TarotT15

    Weight: 4.00 kg

  • Tarot TL68B10 10mm metal silicone damping Block group

    Outer ring is made with CNC aluminum with two M2.5 screw holes, distance 14mm, inner ring is rubber damper with 10mm dia. hole.Specification :- M10 Rubber Damper x 2- M10 Black Aluminum Mount x 1 (22 x 22 x 4mm)- M10 Orange Aluminum Mount x 1 (22 x 22 x 4mm)- M2.5 x 6.5 Inner Hex Screw x 4Suitable for : Tarot FY650 / FY680 / T810 / T960 / T1000

    $6.49 $5.58, Save 14% OFF

    SKU:TL68B10

    Weight: 0.10 kg

  • Tarot eight in one hub group TL100B14 for multirotor

    Product description:TAROT self-designed multi-rotor hub integrated with environmentally friendly materials and full CNC machining, meet RHOS standard. For multi-rotor power integration, 24K gold plated hub surface, thickness of 8u, supporting thousands swappable, stable at high current,constant discharges. Wavy slotted weld design, increasing the contact surface of the solder to effectively prevent solder Weld. Interlocking slip design to prevent shock loose tops, lightweight line from the edge of only 0.2MM reach processing limit. Accessories:Wooden Paint hub TL100B07Wooden Paint hub / male TL100B13 Specifications:Wooden Paint Hub Block × 14.0MM24K plated hub (male) × 14.0MM24K plated hub (female) × 1Cup head screw M2.5 × 4MM × 2M3 × 8MM SHCS × 1Weight: 78G

    $8.39 $6.38, Save 24% OFF

    SKU:TL100B14

    Weight: 0.10 kg

  • Tarot six in one Hub group TL9607 For multirotor

    Product Description: TAROT self-designed multi-axis hub with environmentally friendly materials CNC machining one, in line with RHOS standard.Suitable for multi-axis aircraft power supply integrated hub surface 24K gold plating thickness of 8u, support thousand swappable,Stable at high current, constant temperature discharge. Wave slotted welding point design increases the the solder contact surface, effectively prevent solder Weld. Interlocking non-slip design to prevent shock loose top, only 0.2 mm from the edge of the line the lightweight of processing limit.Specifications:Six hub Block 13.5MM24K gold-plated hub (male) × 1The gilded 3.5MM24K hub (female) x 1Cup head Allen screws M2 × 5 mm × 2M2.5 × 6.5 Allen stepped screw × 1

    $7.10 $5.54, Save 22% OFF

    SKU:TAROTTL9607

    Weight: 0.10 kg

  • Tarot IRONMAN 650 3K Pure Carbon Fiber Folding FPV Quadcopter Frame TL65B01

    NOTICE~ This is Unassembled Kit  , FRAME ONLY ~This product only includes the frame, no other config is included.The Tarot Iron Man 650 adopts Toray 3K carbon fiber woven cloth fiber board, with 3K hollow twill pure carbon fiber tube (non-3K glassy carbon tube). A full CNC machining design with higher standards than similar priced products. All the carbon and CNC work means the full frame weighs only 476 grams! The Full folding design makes for a high portability design and is highly adjustable to meet the needs of most utilitarian applications. The Tarot 650 series with its high portability, lends itself to off the beaten path flying and tasks such as aerial photography, remote sensing, mapping, life exploration and the list goes on. If you’re ready for a pro grade multirotor platform, look no further than the Tarot 650.Features:Fold-ability for transportation and storageToray 3K carbon fiberLightweight15 Minute flight times (Dependent on setup)Folding landing gear60mm rail mountSpecifications:Size motor to motor: 650mmWeight: 476gHeight from ground to lower rods: 180mmHeight from ground to top: 220mm  Recommended Configuration 1: gopro configuration (recommended) 1x naza-m v2 with gps set4x hobbywing flyfun 30a ESC4x t-motor mt3506 kv6502x 4s 5200mah battery4x 1238 carbon fieber propeller 2: Micro single configuration (generally recommended) 300-400W Motor +30 A ESC +4 S 5000-10000 battery +12-14 inch propeller Recommended Configuration 3: SLR configuration (not recommended) More than 400W Motor +40 A ESC +6 S 5000-10000 battery +14-17 inch propeller

    $115.90 $97.36, Save 16% OFF 2

    SKU:Tarot650

    Weight: 1.40 kg

  • Tarot 1238 3K Carbon Fiber Propeller 12*38 Props TL2833

    Product Description:Carbon fiber CW / CCW props applies to motor mounting holes for the three-hole series of six-axis, eight-axis multi-Axis brushless motor. Import Toray 3K plain carbon fiber woven carbon content of 100% precision plus high temperature and pressure precast workers, hardness higher than conventional products on the market, each pair of the pros and cons of full carbon fiber paddle through the manual trim static and dynamic balance, TAROT optimization the series full carbon fiber wing efficiency and load of the pros and cons of paddle stability.

    $13.50 $9.72, Save 28% OFF

    SKU:TA1238P

    Weight: 0.20 kg

  • Tarot 3-axis Pan Tilt and roll stabilization Gyro system ZYX-GS

    Product Description Features:● Three axis stabilization. Pan, Tilt and roll stabilization● Adjustable Gains and 3D attitude through PC software● Support attitude locking mode and attitude following mode● Support stick following mode and position following mode● Sensor technology: 3-Axis MEMS gyro and accelerometer● Support servo type: 1520/960/760 analog servo and 1520/960/760 digital servo● Support receiver type: standard receiver/S-BUS receiver/DMS digital receiver● Support remote controller type: PPM/PCM/2.4G Specification:● Size: 38x29x13mm/27x27x9mm● Weight: 26g (without wires and connectors)● Support receiver: PPM/PCM/2.4G● Operating voltage: DC3.5V~9V● Operating current: 60mA● Working temperature: -15oC~65oC● Max palstance: 2000o/sec● Max acceleration: 16g.● Frequency: 800Hz● Control angle: -45o~45o(roll), -180o~180o(direction), -135o~90 o(pitch)

    $135.90 $97.85, Save 28% OFF

    SKU:TRPTRGYRO

    Weight: 0.40 kg

  • Tarot 2-Axis Brushless Gimbal for Gopro camera

    Product description:T-2D PTZ is TAROT company for GoPro Hero3 camera was developed, used in photographic film and entertainment, advertising and many other areas of model aircraft photography. 。 PTZ using 6061T6 aluminumalloy full CNC precision machining, brushless direct drive motor, the overall framework designed with the idea of compact, easy installation and other characteristics.  Stable head structure allows the aircraft is flying at highspeed state, still be able to precisely control the camera mounted GoPro Hero3 remain stable, so that the screen output to achieve the best model aircraft photographic effects.  Product Features:1, support GOPRO Hero3 video auxiliary output 2, support the supply voltage polarity protection and voltage compensation 3, support the motor drive end short-circuit protection 4, support for custom initial pitch angle 5, support sensitivity parameter adjustment and software 3D pose show 6, the support rocker rate mode and position mode 7, support Receiver: conventional receiver, S-BUS receiver, DSM2/DSMJ/DSMX receiver8, support for remote devices: PPM/PCM/2.4G 9, the working voltage: DC 7.4V ~ 14.8V (Recommended 12V, three lithium battery) 10, working current: 200mA-500mA (power supply voltage and the motor related) 11, the working environment temperature: -15 ℃ ~ 65 ℃ 12, the processor: Dual 32-bit high-speed ARM core processor 13, the sensor: Three rotor MEMS gyroscope rotor MEMS accelerometers and the three 14, the maximum angular rate: 2000 ° / sec 15, the maximum acceleration: 16g 16, the control frequency: 2000Hz 17, the motor drive frequency: 20KHz (no noise smoothing driven) 18, the control accuracy: 0.1 ° 19, the control angle range: -45 ° ~ 45 ° (roll), -135 ° ~ 90 ° (tilt) 20, pose solver algorithms: PTZ dedicated brushless motor decoupled EKF algorithm 21, for shooting equipment: GOPRO Hero Related Part Number: Head hanging hook TL68A01 GOPRO camera fasteners TL68A02 GOPRO brushless PTZ camera frame assembly TL68A03 GOPRO head roll arm TL68A04 GOPRO PTZ stand arm motor base TL68A05 GOPRO brushless motor TL68A06 PTZ GOPRO two axes PTZ shock group TL68A07 GOPRO brushless pan rack assembly TL68A08 GOPRO head roll axis brushless motor TL68A09 GOPRO AV video output cable TL68A10 GOPRO PTZ suspension ball TL68A11 GOPRO two-axis gyroscope ZYX22 PTZ Specifications: GOPRO brushless pan rack assembly TL68A08 × 1 GOPRO two-axis gyroscope ZYX22 × 1 PTZ Weight: 195g

    $153.99 $86.23, Save 44% OFF 1

    SKU:TAROT2AG

    Weight: 0.40 kg

  • Tarot IRON MAN 1000 Octocoptor Frame Kit TL100B01 Ultralight

    Tarot TL100B01 adopts CNC precision machining method to cut carbon fiber board and Aluminum alloy tubes, his design standards is higher than similar products, the full set of rack only weighs 1.60 kgrams. Full folding design, satisfied users high portability requirements, particularly suited to do surveillance, remote sensing, mapping, airborne reconnaissance,Observed fire, life exploration, the cable line patrol, farm monitoring, and other high mobile performance requirements.Specifications: Pure carbon the upper body cover (250 × 240 × 2.0MM) × 1 Pure Carbon lower body cover (250 × 240 × 2.0MM) × 1 M3 pan nut × 48 Pure carbon battery holder (220 × 63 × 2.0MM) × 1 Pure Carbon transit center plate (73 × 73 × 2.0MM) × 1 M3 × 35MM (H7) hexagonal aluminum columns × 6 M3× M3 × 12MM (H7) hexagonal aluminum columns × 4 Pure Carbon motor adapter plate (35 × 38.6 × 2.0MM) × 16 Φ25MM 3K pure carbon tube (495MM) Metal Φ25MM Motor Mount × 8 M3 × 24 Cup Hexagon collar screw × 24 Pure Carbon Fiber Tripod left side plate (345 × 150 × 2.0MM) × 3 Pure carbon tripod side plate (250 × 240 × 2.0MM) × 3 Φ25MM head tube clamp × 60 (color) M3 × 35 Cup Hexagon collar screw × 60 Shock sponge round × 3 M3 × 10MM aluminum columns × 3 M3 * 5MM round head screws × 18 M2 * 18Mm Cup Hexagon collar screw × 3 M2 slip nut × 1 Color stickers × 4 points Large water stickers × 8 Velcro battery × 1 Manual × 1Product parameters:- weighs : 1.6KG (containing tripod)- Tube diameter: 25MM- Wheelbase: 1020MM- Rack diameter: 1070MM- Total height: 380MM- Center cover Specifications: 250 × 240 MM- The equilateral triangle Installation of the motor mounting hole distance: 16MM/19MM/25MM/27MMRecommended configuration:- DJI wookong-m autopilot - 8x mn4014 kv400 /kv330  Or T-motor 3515-15 400kv motor- 8x Hobbywing platinum 40A ESC- 4 x CF 1447 propoller- 6S dupu  Lipo BATTERY 10400mah

    $393.00 $345.84, Save 12% OFF

    SKU:TAROT1000

    Weight: 2.50 kg




Find us on Google+ Watch us on Youtube Like us on Twitter Follow us on Facebook

Home   |   About Us   |   New Products   |   Multi-Rotors   |   FPV Airplanes   |   FPV Equipment   |   Battery / Chargers   |   Tools & Accessories   |   Contact Us   |   Blog   |  Site Map

Product Tags: ABCDEFGHIJKLMNOPQRSTUVWXYZ0-9

Copyright © 2015 FPVMODEL.COM®. All Rights Reserved.