RX & VTX Top 10

  • Aomway TX001 5.8G 40CH 25/200/600mW Power Switchable Transmitter

    Specification: Brand Name: Aomway Item Name: TX001 Transmitter Frequency: 5.8Ghz Power Adjustable : 5.8G Switchable 25mW/200mW/600mW Channel: 40CH 5658-5945mhz (Raceband) Wide Power Input: 6-28V Current: 12V/200mW/150mA Channel&Frequency Adjustable Button Indicator LED to show the frequency and power Mic: Swithable, when open the Mic., it will occupy one audio channel Output Voltage: 4.9-5.1V for camera Audio: Stereo Output Format: Auto regonize NTSC/PAL Connector: TX001A SMA short conenctor;TX001B 50mm SMA extend cord connector Dimension: 29x25x10mm Weight: 11g

    Review: Write a Review

    $34.99 $30.79, Save 12% OFF


    Weight: 0.10 kg

  • STX202 Dual Transmitter for Skyzone SKY02S V+ Goggles

    Please note that STX202 Dual Transmitter is a replacement part of Skyzone SKY02S V+ FPV Goggles. It may not be compatible with other goggles or products.Dual Transmitter STX202 Specifications:

    Review: Write a Review

    $45.99 $42.31, Save 8% OFF


    Weight: 0.15 kg

  • FX797T Micro FPV Camera & 5.8GHz 40CH 25mW VTX

    Time to get your micro builds going! The FX797T Micro FPV Camera & 5.8GHz 40CH 25mW VTX is extremely small and could be installed on almost anything, most multi-rotors wouldn’t even notice it was there.  This camera / VTX combo is the perfect FPV plug & play solution for micro setups.Due to their size and adaptability, the FX797T micro camera and video transmitter has taken the FPV world by storm. This fabulous little piece of tech allows the user to install on the smallest of builds and get reception up to 100 meters in range. The design of this camera/vtx is intended to be small enough to mount on almost any micro flyer out there and it has found it’s home in the Tiny Whoop/Blade Inductrix quad to be it’s calling. Featuring the full range of 40 Channels this camera outputs all common video signals including the latest “race band” channels. Combined with it’s low amp draw this camera is perfect for those tiny builds that are already using the smallest of batteries. Easy to install and easy to wire up (just gnd and power lines) this camera will simplify your build. Description:Item Name: FX797T Micro FPV Camera & 5.8GHz 40CH 25mW VTX FX797 Output power: 25mWInput power: 2.5–5V Current Consumption: 230mAAV Output: VGA 640x480 PAL/1VP-PCamera resolution: 600TVLMin illumination: 1 luxField of view: 120° viewing angleAntenna dimensions: 20mm X 25mm diameterAntenna: 3 lobe right hand circular polarizedVideo output: NTSCFrequency: 5.8GHz 5 bands 40 channels, with Raceband: 5658-5917MHzBands: see below channel table.Push button operation, long press for band, short press for channelSpecs:2 Row LED indicators, 5 LED for band, 8 LED for channelSize: 17x17.5x12.5mmWeight: 3.4gFeatures:Micro Size and Light weightEasy installation for racing droneFive bands 40 channels with RacebandButton Control Instead Of SwitchIncluded:1 x FX797T 5.8G 25mW Transmitter With 600TVL Camera and Antenna1 x manual

    Review: Write a Review

    $41.99 $26.87, Save 36% OFF


    Weight: 0.10 kg

  • FPVModel Dual channel 5.8G 40 channel competitive version receiver built in DVR

    FPVModel Dual Channel 5.8G 40CH Receiver DVR FootageFPVMODELs 5.8G Explorer 40 channel dual diversity receiver. This reciever is designed for both close range and long distance flights featuring a built in DVR that can record your flights and later(if needed) be used to review flight footage to help aid in the retrieval of a lost model. The channel range covers the standard 32 channels weve all come to know over the last few years and the additional race band that has recently started to take over the miniquad scene. This is perfect for those tight indoor tracks and helps pick up a better signal where instances of multipathing are high. Comes with a standart thread that fits most tripods so this will allow for easy mounting and getting some of the height needed for better signal reception. 5.8G Explorer also features a 3.5mm jack for easy connection to your goggles. Battery straps on the back allow for easy battery storage and can accept a wide range of batteries from 2S to 6S.(7-24v) Receiver Sensitivity of -96dBm.Features:1 Receiving frequency: ISM 5.6GHz-5.95GHz 40CH2 Operating Voltage: 7.0V-28.0V3 Supply current: <300mA/12VDC4 Video Output Level: 1V±0.2Vp-p/75Ω5 Aidio Output Level: 0.5~2.0Vp-p/10KΩ 6 TV System: PAL/ NTSC / SECAM(AUTO)7 Wireless Receiver Sensitivity: <-92dBm(15dBuV)8 Antenna Connector: SMA Connector9 Weight: 212g(dvr)10 Dimensions(L*W*H): 60*150*27.5mm11 Operating Temperature: –10℃~+85℃Item Packing:1 x receiver1 x power cord1 x video line2 x antenna2 X band1 x 3.5mm audio & video plug

    Review: Write a Review

    $86.99 $82.64, Save 5% OFF


    Weight: 0.70 kg

  • Dragonfly 5.8G Receiver Module for Fatshark Dominator FPV Goggles

    Higher sensitivity and much more durable. Perfect for those who want to upgrade to race band.The Dragonfly 5.8G receiver module is made for the Fatshark Dominator line of goggles. The RX has been manufatured in white to match the white headset for the flyers that dont use the plastic snap cover but can also be used with the cover in place. This reciever has a built in LED to make it easier to know what channel you are on and make the channel selection process much smoother. No fooling around counting flashing lights with buttons that are too small and hard to press. Long press the button to band and use the fatshark channel buttons to cycle the channel.Quick Intructions:Place the module into your Fatshark Dominator receiver. Long press for Band, Cycle goggle channel switch for channels. The receiver will display the currently active band with the LED.- 1 flash = BOSCAM Band A- 2 flashes = BOSCAM Band B- 3 flashes = BOSCAM Band E- 4 flashes = Airwave- 5 flashes = Race bandSpecifications:1. 40 channels (5 Bands with 8 channels each)2. -90dBm sensitivity3. Works with all BOSCAM A/V transmitters (200mW, 400mW, 500mW)4. Works with Airwave transmitters (tested with the new ImmersionRC 600mW). Airwave frequency support is not full spec. Range is affected, as well as transmission picture quality! We highly recommend the use of BOSCAM transmitters.5. 3 - 5V operating voltage6. SMA antenna connector7. Fatshark Dominator compatible, toggles channels using the Fatshark button!8. Can be installed into Fatshark Attitude goggles!Supported Frequencies:

    Review: Write a Review

    $28.99 $26.67, Save 8% OFF


    Weight: 0.10 kg

  • FrSky XSR 2.4GHz 16CH ACCST Receiver S-Bus CPPM Output Support X9D X9E X9DP X12S X Series

    Description: Channel: XSR-16CH(1-16CH from SBUS channel,1-8ch from CPPM Channel)Dimension: 26 x 19.2 x 5 mmWeight: 3.8gOperating Voltage Range: 4.0~10VOperating Current: 100mA@5VFirmware UpgradeableCompatibility: FrSky X-series Module,X9D,X9DP,X9E,X12S(XSR is incompatible with D-series Module) Features:Smart Port enabled,realizing two-way full duplex transmission.S-BUS outputCPPM outputLighter weight and physically smaller than X4RMore number of channels:1-16CH from SBUS channel,1-8ch from CPPM Channel

    Review: Write a Review

    $31.89 $22.32, Save 30% OFF


    Weight: 0.20 kg

  • Dragonfly 5.8G 40CH Mini TX 25mw/200mw

    Introducing the new ultra light weight Dragonfly 5.8G mini video transmitter. Featuring the full range of 40 channels to ensure you can transmit on the frequency that is most convenient to you. This transmitter features a smart design with push button band & channel navigation, along side the edge of the transmitter is a power switch enabling the user to turn the tx off and on at will. This is especially helpful when connecting to the computer or powering the aircraft without the antenna on. Press once quickly to change channels, hold down with a slight pause to enter band mode and cycle through the full range of bands. Dont worry about fumbling with dip switches and channel diagrams with this smart push button design.We have 25mw and 200mw sending power for your choice. Price for single TX only.Frequency and Channel Frequency Table

    Review: Write a Review

    $21.99 $16.05, Save 27% OFF


    Weight: 0.10 kg

  • FrsKy 2.4GHz Futaba FASST S.BUS 4CH Receiver TFR4SB

    Compatibility:FASST 2.4G Air Systems (7CH Mode/Multi Mode): 6EX, 7C, TM-7, TM-8, T8FG, T10C, TM-10, T10CG, T12Z, T12FG, TM-14, T14MZ, etc..FASST 2.4G Surface Systems (C1 Mode): 3PK, 4PK, etc..Compatible servos via SB port: Futaba S.BUS servos, FrSky D12MB servoFeatures:Compatible with FASST 2.4GHz Air Systems (7CH Mode/Multi Mode) & Surface Systems (C1 Mode) SB port is compatible with Futaba S.BUS servos and FrSky servo D12MB. No receiver channel limits (except by those on your transmitter) and prevents mismatched servo channel connections. Two selectable failsafe setting options (use native failsafe on transmitter or set failsafe on TFR4SB directly.High sensitivity and stability.Wide operating temperature range, suitable for all kinds of models.Specifications:Number of Channels: 3~16 (4~16ch in S.BUS mode)Operating Voltage Range: 3.5V~10VOperating Temperature Range: -10~80 degree of CelsiusServo Frame Rate: 14ms (FS-Normal Speed Mode), 7ms (HS-High Speed Mode)Dimension: 41x24x6mmWeight: 6g

    Review: Write a Review



    Weight: 0.20 kg

  • SKY-HD01 5.8G 1080P HD FPV Wireless Transmitter DV Camera AIO

    Features:1.Full HD 1080p 30fps2.Built-in 4 Bands 32CH 5.8Ghz 400mw transmitter3.LENS Rotation range: ±45 degrees4.FOV angel: 150 degrees (Diagonal) 5.Support PWM remote control6.Support OSDSpecifications:Latency: about 0.15s Weight: 56.9g (w/transmitter, w/o cables)Function Diagram Precautions:- Please make sure the DV battery is full recharged before use- Please connect the Micro 5Pin USB cable to the DV and the other end to the 5V power source( Power adapter, PC or power-bank )- It’ll take about 90mins to recharge. Charge Led is in red while charging and in green after fully charged.- The PWM remote control feature fulfill with a 3 Switch of the remote controller.- The PWM remote control feature fulfill with suited LCD display products.Power Key/Led - Long press Power button for 3 seconds to turn on the PWM remote Control and blue led flashes. Short press again to turn on the camera and in camera review mode.(Blue Led off after turning on and Red constant light)- Short press once to enter system menu under Review mode- It’s ESC button in menu mode- Long press 3 seconds to turn off the device.Photo Key- Short press once to capture a photo in review mode.- Short press once to capture a photo in recording mode.Record Key- Short press once to start recording in review mode and press to stop recording.- Long press 3 second in review mode to enter playback mode.- It’s OK button in menu mode.UP key- Short press once to setup the Bands- It’s UP button in menu modeDown Key- Short press once to setup the channels- It’s Down button in menu modeRecord Mode- Red LED flashes while recording and REC icon in red- Video files will be auto saved (reach setup video length)and create a new file to continue recording.(recording time will be displayed on the screen until stop recording)- It’s OK to capture photo while recordingRemote Bands/Channels Setup- Connect 3P remote control cable to one of PWM Channel of the receiver and other end to the S1 port on the camera- To assign a Channel to Bands/Channels Setup and assign another 3 switch, C-H for Bands, C-L for channels Remote camera control ( fulfill with suited LCD display products)- Connect 3P remote control cable to one of PWM channels of the receiver and the other end to the S2 port of the camera- To assign a channel to camera remote control port S2- Connect the LCD monitor remote control output port to the PWM input of the remote control. Then you can operate the camera via the LCD monitorExternal OSD Device- Press both UP/DOWN button at the same time in review mode to switch the camera to OSD transmitter mode. Then the video output to the external OSD and then back to the camera- Press the two buttons again back to normal video transmitter modeMenu ListSpecifications

    Review: Write a Review

    $99.00 $93.06, Save 6% OFF

    SKU: SKY-HD01

    Weight: 0.40 kg

  • Skyzone R600 OLED Display 5.8g 32ch Receiver for FPV

    Skyzone R600 OLED Display 5.8g 32ch Receiver for FPV. The reliable R600 Receiver, it works perfectly with the T600 video transmitter, also features "R" band, and 5dB more sensitive than other receivers.Basic Function:CH and FR with OLED display:

    Review: Write a Review

    $42.39 $40.69, Save 4% OFF


    Weight: 0.20 kg

  • Skyzone T600 5.8Ghz 600mW A/V Transmitter

    Skyzone T600 600mw video transmitter features "R" Band, it is 37mhz apart from the next channel (e.g. 5658, 5695, 5732, 5769, 5806, 5843, 5880, 5817mhz), this minimize jamming with another FPV player in the field.Specifications:Frequency and channel frequency table

    Review: Write a Review

    $49.39 $43.96, Save 11% OFF


    Weight: 0.20 kg

  • Quick Start FPV Set for Fixed-wing Aircraft w/Aomway 5.8G TX, Fatshark V2 Camera, Monitor (Optional)

    These are quick start FPV sets specially made for fixed-wing aircrafts!  No more worries about which option is the best in the custom packages. We have tested every part to make sure all of them are well matched and performed. Plug and play. The wires are pre-soldered, so that you do not need to do the soldering work. There are three types of FPV set for your choice. Just choose the one most suitable for your fixed-wing aircraft and FPV plane. See what are included in each FPV set as below:Update on June 28th, 2017: Due to the FPVModel Dual channel 5.8G 40CH receiver was out of stock. The receiver change to Aomway 5.8G 48ch Receiver Built-in DVR for FPV.FPV Set 1 :FATSHARK PilotHD 720p Micro HD FPV Camera V2 x 11.2G 5.8G Micro BEC w/CNC Enclosure 5V  x 1AOMWAY 5.8G 15CH 1000mw TX  x 1and other accessories FPV Set 2 :FATSHARK PilotHD 720p Micro HD FPV Camera V2 x 11.2G 5.8G Micro BEC w/CNC Enclosure 5V  x 1AOMWAY 5.8G 15CH 1000mw TX  x 1Sharp Vision 7 Inch LED Monitor With Built-in 5.8G Dual Receiver and DVR x 1Aomway 5.8G 5DBi High Gain Omni Antenna x 1Aomway 5.8GHz 14dBi High Gain Mini Panel Antenna x 1RP-SMA Male to SMA Female Adapter x 1and other accessoriesFPV Set 3 : FATSHARK PilotHD 720p Micro HD FPV Camera V2 x 11.2G 5.8G Micro BEC w/CNC Enclosure 5V  x 1AOMWAY 5.8G 15CH 1000mw TX  x 1Aomway 5.8G 48ch Receiver Built-in DVR for FPV x 1XT60 Male To Two DC 5.5mm Plug Connecting Wire x 1Super 7 inch TFT Color LCD Snowflakes Screen x 1and other accessoriesFPV Set 4 : FATSHARK PilotHD 720p Micro HD FPV Camera V2 x 11.2G 5.8G Micro BEC w/CNC Enclosure 5V  x 1AOMWAY 5.8G 15CH 1000mw TX  x 1Aomway 5.8G 48ch Receiver Built-in DVR for FPV x 1XT60 Male To Two DC 5.5mm Plug Connecting Wire x 1Super 7 inch TFT Color LCD Snowflakes Screen x 1MYFLYDREAM AAT Automatic Antenna Tracker 6 channels  x1 ( or you can choose MYFLYDREAM AAT Automatic Antenna Tracker 12 channels ,need to tell our customer serive staff )FPV 1.2G 5.8G Micro BEC w/ CNC Enclosure 12V  x 13M Super Strong Double Sided Adhesive  x1FreeFlight Velcro Battery Strap  x2FPVMODEL Velcro Battery Strap   x2Super 7 inch TFT Color LCD Snowflakes Screen x 111 inch Articulating Friction Magic Arm + Super Clamp   x1and other accessories

    Review: Write a Review

    $131.99 $128.03, Save 3% OFF


    Weight: 0.20 kg

Find us on Google+ Watch us on Youtube Like us on Twitter Follow us on Facebook

Home   |   About Us   |   New Products   |   Multi-Rotors   |   FPV Airplanes   |   FPV Equipment   |   Battery / Chargers   |   Tools & Accessories   |   Contact Us   |   Blog   |  Site Map


Copyright © 2015 FPVMODEL.COM®. All Rights Reserved.