Sorted:
  • MFD Crosswind Nimbus Pro 1900mm FPV Plane Frame Kit

    * Before Purchasing: We always try our best to lower the shipping cost for our customers. However, due to the packaging size, the shipping cost may vary significantly depending on your location. In most cases, Ems may be the most economical option. For some areas where EMS can not reach, we might need to ship orders via other couriers.Shipping Notice:  Due to its package size, the plane would not be able to ship to  Hungary, Bulgaria, and Denmark via EMS. We apologize for the inconvenience causing to the customers from above the countries.Crosswind is a new twin motor FPV platform for professional UAV needs. The main wing is updated with a new shape of the airfoil, which greatly improves the lift-to-drag ratio and especially the lift when in low speed. Crosswind’s wingspan is 10 cm larger than that of the MTD 1800 mm while the wing is wider and the fuselage longer.The extra large interior space fulfills most camera installation requirements. All the main components, such as the main wing, rudders, and elevator adopt a quick release design which makes the plane convenient to disassemble and carry. Crosswind will also be able to land with a parachute. There are a dedicated parachute compartment and loops for fixing the straps.Due to its modular design, the excellent scalability of Crosswind makes it very easy to upgrade. In addition to the standard fixed wing version, there will be a Crosswind VTOL version launched soon.Specifications:1. Wingspan: 1900mm 2.Body length: 1287mm3.Height: 394mm4. Maximum Takeoff Weight: 3.4-6.5kg 5. Cruise Speed: 52-70 km/h6. Max Speed: 130 km/hRecommended Parts:(Not included)Propeller: 11×7  propMotor: 2820 kv595 motors 2pcsESC: Hobbywing platinum 40A ESC with BEC 2pcsServo: 17g servo 3pcs + 12g servo 2pcs Power Combo:  Crosswind 1900mm Sport Combo Compared to MTD 1800mmPackaging box: Note: The camera cradles and battery shown in the above pictures are not included in the frame kit.

    $179.99

    SKU:CW1900

    Weight: 5.70 kg

  • Skywalker EVE-2000 2240mm Wingspan FPV RC Airplane

    EMS latest notice:Due to the high season. Only the following countries can choose EMS shipping for plane orders: Hong Kong, Taiwan, Singapore, Philippines, Japan, Canada, Australia, France, South Korea, USA, Italy, Belgium, Spain, Russia, United Kingdom and Germany. For other countries, pls choose shipping methods such as DHL or Fedex. Thank you for your cooperation.EVE 2000It is Skywalker’s latest masterpiece that acts as long-rang cruise professional aerial survey aircraft.Not surprisingly, it is called “Aerial Carrier”.The players can modify cabin space at their will which can place IPAD 3 directly. With aggressive outlines and the most reasonable aerodynamic performance design, it has been a continuation of strong wind cooling design to keep the best working state. It is equipped with strong double front engines that can control aerial vehicle flexibly.Through a large number of optimization design and repeated flying testing, it can complete high quality flying, aerial shots and aerial mission in complex environment with real-time dynamic control system on the fuselage.Specifications:Motor: 2815KV 510*2pcs  (Update on September 21th, according to the factory request.)Wing span:  2240mm Propeller: (9*6/10*6 )*2pcsFuselage length: 1270mm Servo: 12g*4pcsWing area: 49dm^2Flying weight: 3800g-4600gBattery: 5S-6S 10000-16000mahC.G.: 80-85mm behind the leading edgeTakeoff:  Hand cast, catapult shot Landing: Parachute landingFlight time: Depending on your paticular flying style.Air speed: 60-80km/h Maximum of flight level: 6000mBefore Purchasing: The motors, ESCs and servos are not included in the option "Frame Kit".Note: Before purchasing: Please take a note that the items included in the ARF might be a bit different from above list due to made in different batches, and some specifications might be changed as well.

    $268.69 $229.99, Save $38.70 OFF

    SKU:SW2000

    Weight: 6.00 kg

  • MyTwinDream 1800mm FPV Plane

    MFD My Twin Dream 1800Long Range...no problem! Mapping....no problem! Overall fpv flier...no problem!!!This is the MFD MyTwinDream 1.8 meter wingspan EPO plane. This plane not only features superb handling, but also quite stable. The interior of the fuselage is large enough to fit most anything you could ever want inside of this amazing aircraft. This is an excellent choice for both average and advanced pilots. Featuring the felexiblity of its vast interior space, this is also an excellent choice for professionals. Being a twin design it also offers redundancy in those times of unexpected motor/ESC loss while in flight. Get yours today and enjoy FPVMODELs excellent shipping times and unbeatable free shipping offer on 200 dollars or more. EMS latest notice:Due to the high season. Only the following countries can choose EMS shipping for plane orders: Hong Kong, Taiwan, Singapore, Philippines, Japan, Canada, Australia, France, South Korea, USA, Italy, Belgium, Spain, Russia, United Kingdom and Germany. For other countries, pls choose shipping methods such as DHL or Fedex. Thank you for your cooperation.Specifications:1. Wingspan: 1800MM 2.Body length 1220mm3.The internal maximum width is more than 13CM4. The internal maximum length is 86CM5. Empty weight: 1.1kg 6. Maximum Takeoff Weight: 4.5-5.3kg 7. Supply voltage: 4-6s8. Wing area: 48.6dm2Recommended Parts (not included):click here1. Motor: 2814 High efficiency motors x 22. ESC : 30A ESC x 23. Servo: 9g*4pcs4. Prop: 9x6 propeller x 25. Cables and XT60 connector6. Power Combo: Power Combo for MyTwinDream 1800mm FPV Plane Features:MyTwinDream 1800 is a multi-platform carrier-based aircraft, and there are video recorder installation platforms (points) (supporting the installation of 2-axis and 3-axis platforms) on the top of both the head and the fuselageThe machine body has giant capacity which can support the mirrorless cameras down installation (the maximum width of inner space is larger than12CM) Fast disassembly available for the whole plane: horizontal tail/verticaltail/main wingMain wing (which can be assembled according to your own preference) 1) Divide into left and right segments (traditional)  2) Divide intofour segments with small volume, which is convenient for going out  3) Stick two wings in the middle segment to the fuselage (prepare for the flightrapidly)

    $159.00 $146.28, Save 8% OFF 1

    SKU:MTD1800

    Weight: 3.50 kg

  • New 2015 Skywalker 1830 1830mm FPV Plane

           EMS latest notice:Due to the high season. Only the following countries can choose EMS shipping for plane orders: Hong Kong, Taiwan, Singapore, Philippines, Japan, Canada, Australia, France, South Korea, USA, Italy, Belgium, Spain, Russia, United Kingdom and Germany. For other countries, pls choose shipping methods such as DHL or Fedex. Thank you for your cooperation.Note: The orange parts already changed to color black. Will the pictures soon.Specifications:1. Wingspan: 1830MM (single wing length:850mm) 2. Fuselage length: 1270MM3. Wing area: 41.06 dm24. Flying weight: 2500g-3000g5. Centre of gravity:Backwards 90-100mm from wing front edgeRecommended Parts (not included):1. Motor: 2820KV850-9002. ESC 45A-60A3. Servo: 12g*4pcs4. Prop: 12-13 inch5. Battery: 14.8v 5500mah6. Radio: 4CHFeatures:1. Plane cabin adopts with the air layer plate structure that improves the strength of fuselage but minus the weight. The inner carbin with three layers, convenient to mount the equipment.2. The wing includes 4 carbon strips and one 12mm carbon tube,1820mm wingspan. High maneuverability with quick detach structure, easy to detach and carry.3. The fuselage with reserved position for GPS, TX/RX and camera. Logical position arrangments avoides the interference with each other and good formaching cooling.4. Resonable design. Reserved space in the nose for brushless 3axis gimbal mounting. With built in air aluminum alloy landing gear, you will no worry about the landing issues. 5. The plane tail adopts 3K tube to connect the fuselage.Light weight (53g) and durable. (winded by fiber cloth)6. Quick mounting clip for Horizontal tail and vertical tai to fasten. Composited by independent part for easy to detach and mount.7. As out test,the plane can be mounted with SONY RX1!8. Support the catapult launch.

    $129.00 $125.13, Save 3% OFF 1

    SKU:SW1830

    Weight: 3.50 kg

  • 2015 SKYWALKER 1680 1720MM FPV PLANE

    EMS latest notice:Due to the high season. Only the following countries can choose EMS shipping for plane orders: Hong Kong, Taiwan, Singapore, Philippines, Japan, Canada, Australia, France, South Korea, USA, Italy, Belgium, Spain, Russia, United Kingdom and Germany. For other countries, pls choose shipping methods such as DHL or Fedex. Thank you for your cooperation.This is the latest 2015 skywalker 1680 1720mm wingspan plane, with totally new wings and new tail design, FPV flyers can get an unimaginable improvement than before. For the new wings, it has two built-in carbon fiber tubes 8mm and 10 mm, servo push rod protection cover, wing protection shells for rubber bands and better stream-line shape. All of these will greatly enhance the strength of the wings, and more suitable for FPV flying.For the tail part, as per the feedback of coustomers, we minish the surface area but the same swing area and with a thicker carbon fiber strip built in which as the picture showed. These improvements also will enhance the strength of tail part, and greatly reduce the vibration as before. For the new 2015 year it will be a perfect new start plane, and you cant miss this.Requirement:4CH Radio set4 x 9g servosMotor:X2814 KV900(4S)/1100(3S) BatteryPropeller: APC 9045E-9060EESC: 40A-60ASpecifications:Wingspan:1720Length:1180mmCabin size:172x280x60 (mm)Flying Weight: 1300g-1800gCenter of Gravity: Backwards 70-80mm from wing front edgeRecommended Power Combo: click hereNote: According to regulations from airlines, liquids are not allowed to be taken on air, therefore, the glue will not be included for shipping.Update on August 7th, 2017: The orange parts have been changed to color grey.

    $99.99 $84.99, Save 15% OFF

    SKU:SKYWALKER2015

    Weight: 2.50 kg

  • FEIYU FY 41AP Lite Autopilot AFSS&OSD For Fixed Wing

    FY-41AP Lite is an inertial attitude measurement instrument used for FPV flight on fixed-wing aircrafts. It has an integrated OSD video overlay system that presents critical flight information such as power management, airspeed, altitude, and flight direction via its electronic compass, allowing for a clear visual flight while ensuring key information is within sight.Flight stabilization is achieved via an integrated 3 axis gyro, 3 axis accelerometer and a barometric pressure sensor. This enables the module to accurately measure flight attitude, earth azimuth & relative altitude to achieve:- Extremely stable conventional flight pattern- Stabilized 3D flight- Automatically return to home (RTL)- Fixed altitude flight- Heading lock flight- Auto circling over a fixed GPS location. Function Introduction● Deactivated Mode —— In this mode, the FY-41AP Lite auto stabilization is turned off. The aircraft is completely under pilot control.● Stabilized Mode —— Level flight is automatically maintained, making flight simple, especially for beginners. If a pilot feels the plane is out of control, simply reduce input control and the plane will automatically recover level flight.● 3D Mode —— If no input is given by the pilot (all sticks in the middle position), 3D mode will lock the current aircraft attitude. Therefore the aircraft can be easily maneuvered to complete a variety of 3D flight with added stability & smoothness.● Fixed altitude & Heading lock Mode —— This mode maintains aircraft flight course & holds the altitude on activation. By using GPS data, the system automatically corrects flight course deviation & maintains straight-line flight.● Auto Return To Launch Mode (RTL) —— Upon activation of this Mode, the aircraft will automatically return to the Home point, maintaining its current altitude. Upon reaching the Home point, it will initiate auto circling.> Related download :FY-41AP Lite Manual :  DownloadFeiyu tech kindly remind you: You should to do the firmware upgrade separately for FY-41AP Lite control module and OSD module . UART1 is the interface connects to the data radio, computer serial port to do the firmware upgrade for FY-41AP Lite control module.If you want to upgrade the firmware of FY-41AP Lite OSD module,please click on hereOSD Video Overlay System Function● First Person View (FPV) —— FY-41AP Lite has an integrated OSD video overlay system that presents critical flight information on the video for easy enjoy FPV, at the same time, Auto stable, Fixed altitude & Heading lock, Auto Return To Home function will make FPV operation more easy.OSD is an essential part for FPV. The FY-41AP Lite can adapt both PAL and NTSC video signals. The entire adaptive process is completed approximately within 1 second.Integrated OSD Video Overlay System, FY-41AP Lite overlays flight telemetry information onto video image. Information displayed includes: Altitude, Speed, Direction, Home Direction and many more. FY-41AP Lite OSD display part firmware V1.22 : DownloadFY module firmware upgrade software and manual :Download You should to do the firmware upgrade separately for FY-41AP Lite control module and OSD module. UART2 is the interface connects to the computer serial port to do the firmware upgrade for FY-41AP Lite OSD module.If you want to upgrade the firmware of  flight control part ,please click on hereFY-41AP Lite Compared With FY-41AP Basic PerformanceSupported aircraft:1, Normal / Traditional fixed-wing planes;2, Delta-winged plane with rudder;3, Delta-winged plane without rudder;4, V-tail plane with aileron;5, V-tail plane without aileron;Supported servo output :   50Hz refresh frequencyRecommended Transmitter :   PCM or 2.4GHz with minimum 6 channelsFY-41AP Lite Module Working Voltage :   5.3V@0.2A( Powered by Power Manager)Air speed senor :   0 ~ 200KM/hPower Manager :   35g(50×24×18mm)Working Voltage Range :   Power of battery 7~26V (2S ~ 6S)Measuring current :   0~100APower for FY-41AP Lite module :   5.3V@2APower for Video transmission system :   12V@2AOperating Temperature :   -10°C ~ 50°CAssistant Software System Requirement :   Windows XP sp3 / Windows 7 / Windows 8  HardwareFY-41AP Lite: 20g (61×39×14mm);GPS :24g (32×32×13.5mm);Air speed senor:9g (64×13.5×13.5mm);Power Manager:35g(50×24×18mm); GCS Ground Station Software GCS ground station software, used to set the flight parameters, mission planning, monitoring in flight. Software integration of electronic map function can through the map software the Google earth live map out into the GCS software. The main function is     Parameter Settings — Control parameters setting, course setting, etc.     Real time monitoring — It can monitor flight attitude. And via the GCS software you can change the flight altitude in real time and realize the mouse click flight.     Record and monitoring flight — You can monitor and download flight path via the GCS software in your computer.GCS 5.11 Software:   Download quickly   |  Download

    $150.00 $114.00, Save 24% OFF

    SKU:FY41APL

    Weight: 0.50 kg

  • New Skywalker 2013 Carbon Fiber Tail Version 1880mm FPV Airplane

    EMS latest notice:Due to the high season. Only the following countries can choose EMS shipping for plane orders: Hong Kong, Taiwan, Singapore, Philippines, Japan, Canada, Australia, France, South Korea, USA, Italy, Belgium, Spain, Russia, United Kingdom and Germany. For other countries, pls choose shipping methods such as DHL or Fedex. Thank you for your cooperation.New skywalker 1880 carbon fiber tail versionNote: A new upgrade for the plane again,  the fuselage horizontal tail is now moved to the top. The change will make the plane more stable and easier to control.This is one of the finest planes skywalker.rc model has ever manufactured. The new skywalker 1880 will re-define high quality FPV Planes.Completely new design to the fuselage with 20mm Japanese cross patterned carbon tail tubes, machined plastic connectors the make the skywalker easily assembled and dissembled in minutes all the while ensuring strength that the flyer wants to have in a FPV plane. Small car, no problem. This plane can fit into a backpack with great ease. Center of Gravity: Backwards 90-100mm from wing front edgeFeatures:1.) Stability that ensures good glider preformance and long range FPV and UAV flights.2.) Newly designed fuselage that can support up to a 12 inch propeller.3.) More internal room.4.) Servo covers for rudder and elevator with an easy to change servo design. This is an all new design that keeps the FPV pilots thoughts in mind. This skywalker 1880 changes the question of, "What do you want in a plane?" to "Why do you need this plane?"...short answer...because it just works!Update on July 26th: The orange parts have been changed to black color. The picture will be updated soon. Thanks for understanding.T tail  ( Update the picture on December 2nd,2016 )Bottom horizontal tailNote: The orange parts already changed to color black. Will the pictures soon.you can click here to view the power combo for skywalker 2013 According to regulations from airlines,liquids are not allowed to air freight,so the aircraft will not include the glue。 

    $112.99 $107.34, Save 5% OFF 8

    SKU:SWCFT+1880

    Weight: 2.70 kg

Find us on Google+ Watch us on Youtube Like us on Twitter Follow us on Facebook

Home   |   About Us   |   New Products   |   Multi-Rotors   |   FPV Airplanes   |   FPV Equipment   |   Battery / Chargers   |   Tools & Accessories   |   Contact Us   |   Blog   |  Site Map

Product Tags: ABCDEFGHIJKLMNOPQRSTUVWXYZ0-9

Copyright © 2015 FPVMODEL.COM®. All Rights Reserved.