Special Sale Top 10

Sorted:
  • X-Racer X9 Micro Racing Quad DIY Combo

    X-Racer X9 FPV flyBefore Purchasing:The X-Racer X9 does not come with the receiver. If you are using the Frsky transmitter, we suggest use FrSky XM 16 Ch Micro SBUS Receiver. If you are using other RC transmitters, you will use other mini transmitters accordingly.The camera in the combos is in PAL version. If you need the NTSC version, please leave message at the checkout, thank you.The DIY version contains the parts that you need to build, but they are not assembled yet. Please note that you will still need to purchase the battery, radio control and transmitter if you do not have them.The DIY combo  does not have the protection cover. If you need the cover pls paid 3 USD via Special Service.Following the X-Racer KL-EX90, FPV Model now has another 2" propeller 90 class micro racer. The ultralight micro racer comes with Runcam Micro Swift CCD camera which is the smallest FPV camera that use 1/3" CCD sensor in FPV community. No more blurry and dull image like youll have on other micro class. You will get the same good quality video on this micro racer like you did with normal Runcam Swift.Micro class FPV racing is more and more popular. Comparing to the regular 5" racing quads, these little stuff have many advantages. You can fly or race with them at anytime any where you like. Because they are so light in weight and so small in size, you do not need to register with FAA if you are from the United States to fly them.Equipped with the mini Raceflight Millivolt flight controller and Raceflight Spark 4n1 ESC, you will gain the best performance that you never had before. The Millivolt presents not only the BEST performance, but also the most STABLE performance due to the amazing vibration rejection technology implemented in RaceFlight. In addition to these, the X9 is equipped with the powerful Dragonfly MC1105 7500KV motors which has been proven very powerful with X-Racer KL-EX90. Features:Small in size and light in weight. All-up-weight is 83 grams only without battery. Do not require the hassles of getting it registered with the FAA if you are from the United States.2s / 3s lipo. Excellent power with just a 2S battery, even more powerful with 3S. It gives you very high speed, very precise and rail-like handling.Fast as other 5" 4S racing quads. Use Runcam Micro Swift, the worlds smallest and lightest CCD professional camera. It has the same performance to reputable Runcam Swift and Swift Mini.Equipped with the mini Raceflight Millivolt flight controller and Raceflight Spark 4n1 ESC. The Millivolt presents not only the BEST performance, but also the most STABLE performance due to the amazing vibration rejection technology implemented in RaceFlight. .Equipped with powerful and reliable micro Dragonfly MC1105 7500kv brushless motors. Gemfan 2035BN 4-blade propellers are almost unbreakable, extremely smooth and guaranteed to exceed your expectations.A Dragonfly 25mw 48ch Vtx with protective coating is inlcuded to give an even more aero dynamic low profile design for the video transmission. Parts Included:1 x X-Racer X9 Frame4 x Dragonfly MC1105 6000kv Motor1 x Raceflight Millivolt Flight Controller1 x Raceflight Spark 4n1 ESC1 x RunCam Micro Swift 2 FPV Camera (Update on September 12th.)1 x Dranonfly 5.8g 25MW 48CH Vtx4 Pairs x GemFan 2035BN 4-Blade Propellers1 x 16AWG Silicon Wire1 x Amass XT30 Plug Male16 x M2*4 Screws16 x M2*6 Screws10 x M2*7 Screws4 x M3*18 Screws7 x M2*19 Aluminum Standoff10 x M3 Black Nylon NutX-Racer X9 Brief Installation Manual: PDF DownloadFriendly reminder: The DIY version contains the parts that you need to build, but they are not assembled yet. The battery and transmitter that shown on the pictures are not included. 

    $228.00 $169.99, Save $58.01 OFF

    SKU:X9ARF

    Weight: 0.30 kg

  • ZMR-X210 4mm Carbon Fiber spare parts

    Here comes the replacement 4mm arms for ZMRX-210 mini quad frame, it will make you worry free with the flying of this carbon fiber mini quad frame. The arms are also suitable for your mini quad DIY. Price is for two arms, so buy as many as you need.Specifications:Thickness: 4mmLength: 119mmQuantity: 2 pcs/kitSuitable for ZMR-X210Before Ordering: 210mm and 280mm arm means the  body diagonal size.Update History: 1. Update on March 28th, 2016: Here comes the spare parts for ZMR-X210. You can order what you need by yourself, thank you.2. Update on April 21st, 2016: Here comes the extended arms 280mm for ZMR-X210. With this arm,  you can install 7 inch propeller to your ZMR-X210.

    $6.90 $4.83, Save 30% OFF

    SKU:X210CB

    Weight: 0.10 kg

Find us on Google+ Watch us on Youtube Like us on Twitter Follow us on Facebook

Home   |   About Us   |   New Products   |   Multi-Rotors   |   FPV Airplanes   |   FPV Equipment   |   Battery / Chargers   |   Tools & Accessories   |   Contact Us   |   Blog   |  Site Map

Product Tags: ABCDEFGHIJKLMNOPQRSTUVWXYZ0-9

Copyright © 2015 FPVMODEL.COM®. All Rights Reserved.