Motors Top 10

Sorted:
  • 6x15mm Coreless Motor for Blade Inductrix and Blade Nano QX (Speed: Fast)

    These are powerful motors that works great in the Blade Inductrix, Blade Nano QX, Blade CPX/S. These motors come with plug and 6cm wire, they are better suited to FPV and will be the perfect upgrade for your Tiny conversion. If you are looking for punch and durability, you found it. Warning: These motors are too power hungry for the stock packs! You need strong batteries to run these motors at full performance. Suggest use 205mah mylipo pack, and they will deliver a lot of punch and maximum runtime.Warning: Applies only to the original Nano QX, without FPV. These motors will turn your Nano QX into an insane jaw-dropping pocket rocket, but it will not like hovering! Depending on the battery you use, you will see varying degrees of oscillations (wobble) during hover and slow flight in SAFE mode. Agility mode does not have this problem.Specifications:Speed: 14.000KvOperating voltage: 1.5-3.7VMax. thrust: 15g (direct drive)1.0A load current at 3.7V (direct drive)Lifetime rating: 5-6 hoursPlug: Micro-JST-1.25Clockwise: red +, blue -Counter clockwise: white +, black -Warning: To maximize performance and life span, please do not run them in reverse! Wire colors are reversed.Dimensions:Motor diameter: 6mmMotor length: 15mmShaft Diameter: 0.8mmShaft Length: 4mmWeight: 1.8g Wire length: 60mmPlease note: wire color coding is reversed from the stock motors. Blade has decided to code their motors differently to everyone else in the industry. If you take off, and your Inductrix or Nano QX spins in circles and yaws like a micro frisbee on steriods, please note wire colors are reversed. Your motors are installed in the wrong spots.

    Review: Write a Review

    $2.19 $1.58, Save 28% OFF

    SKU:CL14M

    Weight: 0.10 kg

  • DYS SE2205 PRO 2300KV Motor Race Edition with PCB for FPV Racer CW/CCW

    DYS  Race Edition Series delivers exactly what quad racing pilots have been looking for from motors in this tough and demanding class. With imported NMB bearings, N52 magnets, 0.2mm laminations and available in CW and CCW configuration, the Race Edition Series of motors are capable of producing a massive 1kg of thrust! and thats more than enough to transform your quad into a serious racing contender.These are the gold colored, hallow shaft design that feature solder pads for connecting to ESCs. They are perfect for many frames, as it allows you to get exact wire lengths and then solder them to the motors for a nice, easy, and clean build.  Comparing to previous version of SE2205, the motor wire of this SE2205 pro version has been removed and changed to use PCB board. The new change allows custom fitting to suit your frames configuration and reduce weight.  Features:*New design with imported NMB bearing*N52 magnet and 0.2mm lamination*Powerful with 1.1kg thrust to work with BN5045 Prop*Hollow shaft with screw to fix the shaft*Special design for the FPV racer champions.Specifications:KV..............................................................................................................2300Configu ration....................................................................................NPStator Diameter....................................................................................22.0mmStator Length..........................................................................................5.0mmShaft Diameter.......................................................................................3.0mmMotor Dimensions(Dia.*Len)...............................................Φ27.7×19.0mmWeight (g)...................................................................................................30gNo.of Cells(Lipo).....................................................................................3-5SMax Continuous current(A)............................................................26.8AMax Continuous Power(W)...........................................................428.8WInternal resistance..............................................................................0.06Ω

    Review: Write a Review

    $17.99 $14.57, Save 19% OFF

    SKU:DY2205P

    Weight: 0.10 kg

  • New Dragonfly MC2206 2800KV Brushless Motor

    These are updated version of Dragonfly MC2206 2800KV motors that released in June 2016. They are powerful, reliable, and quick, specially designed for FPV racing mini quads that need punchy motors and the higher KV to spin those 4045 props that bit faster. The higher KV and electrical ratings allow these motors to deliver more thrust compared to other existing motors on 4 inch propellers.The new Dragonfly MC2206 2800KV motor does not come with the prop adapter, but comes with a locknut. Not only save the weight for better racing performance, but also more reliable and easier to use. This version is without the c-clip, but with a locked design at the bottom, no need to worry about the motor will drop out during racing.    Weight: 32gInternal Resistance: 0.013ΩKV Rating: 2800KVAll Dragonfly motors come with a Satisfaction Guarantee. If for any reason you are not COMPLETELY 100% SATISFIED, you can return the motors for a full refund within 30 days upon receiving them.

    Review: Write a Review

    $15.99 $10.39, Save 35% OFF

    SKU:MC2206-28KV

    Weight: 0.10 kg

  • Emax MT2206 1900KV Brushless Motor for FPV Racing Quad CCW

    The emax MT2206 1900KV brushless motor is specially designed for 200-300 sizes multirotors, which weighs only 32g. It offers great performance at affordable price. Each motor is carefully balanced and tested before shipped out from factory. Using Japanese NMB ball bearing, Japanese Kawasaki stator, Ndfeb with strong magnetic and high temperature resistance, decreasing heat generation during operation, increasing efficieny.Features:1. Low CG design, ligth weight design, longer flight duration 2. Factory has made dynamic balance test for each motor3. Integreated processing between prop mount holder and motor cap4. Adopts Japan NMB bearing, with low noise and longer lifetime5. Adopts Japanese Kawasaki stator, with high efficiency and low heat6. CW and CCW propeller adapters, holding propellers tightly. 7. 100% balanced, decreasing vibration to the minimum.Specification:Structure: 12N14PKV: 1900KVLength: 34.2mmRotor outer diameter: 27.9mmShaft diameter: 3mmLipo battery: 2-3SMax. pull: 460gProp suggest: 6-8 inchWeight: 32gPackage size: 108*68*31mmNote: The EMAX RS2205 - CW thread/CCW rotation, CCW thread/CW rotation.

    Review: Write a Review

    $17.99 $14.03, Save 22% OFF

    SKU:MT2206

    Weight: 0.10 kg

  • EMAX RS2205 2300KV Motor for FPV Racing Quad CW/CCW

    Note: The EMAX RS2205 - CW thread/CCW rotation, CCW thread/CW rotation.Have you guys seen the latest EMAX RS2205 Racing Edition motors? Excited? If you are, order them! The new RS2205 KV2300 motors from Emax are specially designed for racing quadcopters. They are some of the best racing motors that we have ever seen. The motors use high strength N52 Neodyum magnets, and have active cooling fins that greatly reduce motor temperatures. Besides, the very light weight designs and high quality Japanese bearings make them the best possible performance.The motor bell and shaft is held down by an enhanced U ring for safety and stability to ensure it doesnt come off. It has dual lock CW and CCW lock nuts. Geared for 3S to 4S use, these motors run M5 shafts, spin at 2300KV, and has a maximum thrust of 1024grams! Using 5x45 inch props will be best on this application, and each motor weighs about 30g.Each motor comes individually, so if you want a full set for your quad, you will need two of the CW ones, and two CCW versions.Features:Race Spec PerformancesHigh Strength N52 Neodyum MagnetsActive Cooling Fins Greatly Reduce Motor TemeraturesLow CG, Light Weight DesignJapanese Bearing For PerformancesEnchance Anti Off U Ring For Safety & StablilityDual Lock CW / CCW LocknutsSpecifications:Framework:12N14PNo. of Cells 3 - 4SLength:31.7mmShaft: M5KV: 2300Max Thrust: 1024gDiameter:27.9mmPropeller Suggested: HQ 5045 BNWeight: 30g

    Review: Write a Review

    $19.99 $14.79, Save 26% OFF

    SKU:RS2205

    Weight: 0.10 kg

  • MC1806 2300KV Titanium Brushless Motor

    The MC1806 2300kv  multirotor motor is ideal for small to medium sized multirotors, including ZMR180 and ZMR250 V2. It comes with all necessary components to get you up and running.Please note that this motor is directly sourced from the factory that without any logo, but quality guaranteed.  Factory Specifications:KV: 2300Configuration: 12N14PStator Diameter: 18mmStator Length: 6mmMotor Dimensions (Dia.*Len): Φ23×15.5mmWeight: 20gInternal Resistance:53mΩTechnical Data:

    Review: Write a Review

    $8.99 $6.92, Save 23% OFF

    SKU:MC1806W

    Weight: 0.20 kg

  • Octocopters Power Combo with T-Motor Antigravity 4004 KV400

    NOTE: These two combos  contain different ESCs.Package including:T-Motor Antigravity 4004 KV400  x4T-MOTOR AIR 40A ESC  x81448 14X4.8 Carbon Fiber Propeller  x5pairsFPV1.2G 5.8G Micro BEC 5V x1Package including:T-Motor Antigravity 4004 KV400  x4HobbyWing FlyFun 40A ESC  x81448 14X4.8 Carbon Fiber Propeller  x5pairsFPV1.2G 5.8G Micro BEC 5V x1

    Review: Write a Review

    $903.69 $650.66, Save 28% OFF

    SKU:TM4004PCO

    Weight: 0.90 kg

  • Hexacopters Power Combo with T-Motor Antigravity 4004 KV400

    NOTE: These two combos  contain different ESCs.Package including:T-Motor Antigravity 4004 KV400  x3T-MOTOR AIR 40A ESC  x61448 14X4.8 Carbon Fiber Propeller  x4pairsFPV1.2G 5.8G Micro BEC 5V x1Package including:T-Motor Antigravity 4004 KV400  x3HobbyWing FlyFun 40A ESC  x61448 14X4.8 Carbon Fiber Propeller  x4pairsFPV1.2G 5.8G Micro BEC 5V x1

    Review: Write a Review

    $677.69 $487.94, Save 28% OFF

    SKU:TM4004PCH

    Weight: 0.80 kg

  • T-MOTOR MN2206 KV2000 Power Combo

    These are affordable power packages with the powerful T-motor MN2204 2300KV Brushless motors that designed for mini quads in the 230-280 size, perfect for our ZMR250 mini quads. Regular selling price is $170.55 USD, now only $148.69 USD.Update on September 8th,  2016: Due to the SN20A ESC out of stock, we have changed the ESC to XS20A. The same price and same performance. Please make sure you understand and accept this before purchasing, thank you!Package including:T-MOTOR MN2206KV2000 x4DYS XS Seris XM20A x4 (on January 26th, 2016)Dragonfly6045 Props x16pcsFPV1.2G 5.8G Micro BEC 5V x1

    Review: Write a Review

    $148.69 $124.90, Save 16% OFF

    SKU:TM2206PC

    Weight: 0.60 kg

  • Dragonfly MC1306 3100KV Mini Motor CW/CCW

    These are the all new Dragonfly MC1306 KV3100 motors for small 180~220mm multirotors and 4~5 inch props, like RTS200. These motors are powerful, reliable,  and quick! DescriptionName: Dragonfly MC1306 3100KV Mini MotorKV: 3100Configuration: NPStator Diameter: 18mmStator Length: 14.1mmShaft Diameter: M5Motor Dimensions(Dia.*Len): Φ18×15.1mmWeight (g): 12gNo.of Cells(Lipo): 2-3SMax Continuous current(A): 7.9AMax Continuous Power(W): 58.5WAll Dragonfly motors come with a Satisfaction Guarantee, if for any reason you are not COMPLETELY 100% SATISFIED you can return the motors for a full refund within 30 days upon receiving them.  

    Review: Write a Review

    $10.99 $8.24, Save 25% OFF

    SKU:DF1306-3C

    Weight: 0.10 kg

  • Skywalker 2820 850KV Motor for Skywalker Series Plane

    Specifications:Easy to convert the direction of output shaftAdapt 0.2mm Silicon-Steel Plate,better perfofmance and anti high temperatureBetter compatibilityImported quality bearingLighter weight and higher efficiency 

    Review: Write a Review

    $32.90 $27.97, Save 15% OFF

    SKU:sw2820-8

    Weight: 0.20 kg

  • FPVMODEL MC2216 800KV Brushless Motor for Multirotor

    FPVModel MC2216 800kv motors use the high quality Japanese NMB bearings and powerful N42sh magnets for optimal efficiency. Main Features:CW/CCW Thread SelectablePrecision Japanese NMB bearingsHigh Power N42sh magnetsCNC MachiningBullet and Flat Style Prop Adapters IncludedHigh quality meets affordability. You can find some reviews on the motors that made by independant 3rd parties at Youtube : https://www.youtube.com/results?search_query=FPVMODEL+motor. Every FPVModel motor comes with a 30 days Satisfaction Guarantee. If for any reason you are not COMPLETELY 100% SATISFIED, you can return the motors for a full refund within 30 days upon receiving them. Note:The motor does not include the screws for mounting with plane arm plate.If the thread rotates clockwise, the motor rotates counter-clockwise and vice versa. 

    Review: Write a Review

    $19.99 $12.99, Save 35% OFF

    SKU:FMMC2216-8

    Weight: 0.20 kg




Find us on Google+ Watch us on Youtube Like us on Twitter Follow us on Facebook

Home   |   New Products   |   Multi-Rotors   |   FPV Airplanes   |   FPV Equipment   |   Battery / Chargers   |   Tools & Accessories   |  Site Map

Product Tags: ABCDEFGHIJKLMNOPQRSTUVWXYZ0-9

Copyright © 2015 FPVMODEL.COM®. All Rights Reserved.