- wireless video transmission:built in wireless vedio transmission module,PAL or NTSC compatible.
- Remote Control function: Can be used as a normal transmitter.
- Built in gimbal rocker (speed mode),you can fly and control the gimbal at the same time.
- bulit-in 7 inch digital monitor,very suitable for your outdood FPV flight.
- support firmware free upgrade online .
- OSD for your FPV flight::real time watching your height,speed,voltage,home point,GPS stars etc .
- Radio channel: 12 channels
- channel setup: supported
- reverse setup: supported
- Remote control frequency: 433MHZ frequency hopping
- fail-saft: supported
- control distance:10KM
- display resolution: 800x480
- TX channels:8
- PAL/NEST: supported
- supply voltage:12V
- weight:1kg without battery
The OSD can work with 3S-6S battery, but we recomment 4S-6S battery
1. If the battery less 12V, the OSD(12V port) will output battery voltage.
2. If the battery more 12V, the OSD(12V port) will output 12V voltage.
- 10hz anti-interference,high precision.
- Voltage detection range:3s-6s
- current detection range:0-80a
- firmware upgrade:supported
- 1x skylark digital radio built in 7 inch monitor and 2.4G/5.8G RX
- 1x transmitter lanyard
- 1X 433M UHF long range receiver
- 1x skylark trace OSD
- 1x 10hz GPS
- 1X Skylark 2.4G/5.8G 500mw 8ch transmitter
- 1x Skylark USB cable
Note:The radio default is Left-hand throttle,if you need the right-hand throttle please leave a note to us.