TX200 VTX is the first video transmitter from Runcam. It is super light weight and designed specifically for the Runcam Micro Swift 2 camera.
The Runcam TX200 is a very simple and plain VTX, there is only one button to change channel, band and power, and some LED’s indicating what settings the VTX is on. The VTX is built on a 19x19mm square PCB and it can be mounted directly on the back of a Micro Swift or Micro swift 2 with the provided standoffs and screws.
You can use this VTX as a standalone VTX too if you wish. The standoffs leave a gap between the camera and VTX PCB’s, allows for airflow and better cooling.
To know more about Runcam TX200 video transmitter, you can take a reference to Oscar Liangs review.
Red LED flashes, only 25mW & limited frequency available;
Red LED keeps on, 200mW & all 48 channels available; By long pressing button for 10 seconds, you can switch between the two modes.
Note: Before you get TX200 unlocked, it is highly recommended to know about the rules and regulations in your country about the frequency to avoid a fine or confiscation of your device.
1 Blue LED for Channel
Short press the button to switch the Channel, Channel 1/2/3/4/5/6/7/8 in sequence. For each short press, the Blue LED flashes once, and only when its under the Channel 1, the LED is always on.
6 Red LED for Band
Long press the button two seconds to switch the Band, Band 1/2/3/4/5/6 in sequence.For each long press, the six Red LEDs light in turn.
1 Orange LED for Power
Long press the button five seconds to switch the power, on is 200mw, off is 25mw, lock mode is limited to 25mw.