Special Sale Top 10

Sorted:
  • CNC Aluminium Alloy Monitor Mount Bracket For Transmitters

    CNC Alloy FPV LCD Monitor Mounting Bracket with universal design that compatible with most transmitters. Aluminum alloy material with gravity regulator to adjust gravity center. Easy to install, light weight and high strength. Except the FPV monitors, you can also install Dragonfly Diversity Receiver on it.

    $4.99 $4.39, Save 12% OFF

    SKU:RCQIB

    Weight: 0.15 kg

  • EMAX AVAN-R Tri-Blade Prop 10CW+10CCW

    AVAN Prop Background for detailed explanation The Avan propellers are designed from the ground up to match your equipment. Each propeller is designed to match the power curve of current motors on the market. This gives the propellers a linear throttle response, great low end control, and incredible top speed. The matched power curve allows efficient transfer of power across the throttle band. Each propeller was designed using custom Computational Fluid Dynamics (CFD) software. This CFD builds up the aerodynamics around a propeller using a Vortex Lattice Method including viscous and compressibility effects. This allows for an accurate performance measure in the design phase. Optimum design is chosen based off the Betz condition for a set design point. The design point is described as diameter, number of blades, speed, rpm, flight angle, and design thrust. The CFD then draws the optimum chord and blade angle distribution (Beta) along the radius to be the most efficient at that design point. This is done by modeling the shedding vortex filaments off each radial section along the blade and making them all shed off in a perfect rectangular screw (Betz Condition). Once the optimum design is set, performance is modeled across a range of speed and rpms (Advance ratio). With power and thrust known for all advance ratios, it is checked against the performance curve of the intended motor. Design conditions are then adjusted to utilize the maximum power available at each rpm from the performance curve of the set motor. This is then analyzed at different throttle positions, favoring the mid throttle range the design conditions are set. With the set chord and blade angle distribution, the propeller is modeled in CAD. Finite Element Analysis (FEA) is performed on the blade for different load conditions. Based on the stress distribution thicker or thinner airfoils are chosen along with the blade and hub interaction. If the airfoil is changed, the CFD analysis is redone and a different chord and beta distribution is found and this process is repeated. FEA is also used to analyze the frequency response of the design. A material is chosen that adequately pushes the first vibration mode away from typical motor resonance frequencies. The Avan-R propeller is a triblade designed for the racer. Expect incredible top end speed with great low end control and a locked in grippy feel. The Avan-R has a design advance ratio of .65 with a 5.0 inch pitch at 75% of the radius. The Avan-R has a weight of 5 g and a moment of inertia of 34 g/cm^2 Specifically designed to match the power curve of the Emax 2306 2400kv motor. The optimum design point for the Avan-R is at 70 mph at 45 degree flight angle, 16000 rpm, with an all up weight expected around 650g. This design target is right around half throttle. The Avan-R uses airfoils that achieve high lift coefficients which expands its stall range and ultimately its efficiency range. This propeller utilizes all the torque available from the Emax 2306 2400kv motor giving extreme responsiveness and efficient transfer of power. The Avan-S propeller is a dual blade designed for top speed with high rpm set ups. This propeller is designed to match the power curve of the Emax 2306 2750kv motor. The Avan-S has a design advance ratio of .75 with a 4.2 inch pitch at 75% of radius. The Avan-S has a weight of 4 g and a moment of inertia of 25 g/cm^2. The Avan-S uses airfoils capable of achieving higher lift coefficients at lower angles of attack to achieve more speed with less blade angle necessary. The Avan-S has a design point of 110 mph at 30000 rpm at 80 degree flight angle. This is close to a full throttle design with lighter aircraft being able to go faster. Expect to push well past 100 mph just on 4s.

    $14.99 $12.89, Save 14% OFF

    SKU:EARTP

    Weight: 0.20 kg

  • TS100 65W Digital OLED Programmable Soldering Iron Station B2 Kit

    TS100 mini iron station is an internal heating intelligent CNC soldering iron, lightweight design, easy to assemble or disassemble and storage, comfortable handle, highly effective heating element and simple control interface, is indispensable tools for electronic worker !~Work between DC12-24V, with OLED screen, temperature adjustment buttons, external power independently, up to 300 ℃ just need as low as 10 sec. Features: * Based on 304 stainless steel nested polycarbonate housing, integration of safety circuit design power supply interface, anti-static structure, embedded STM32 processor chip, dual temperature sensor and acceleration extreme cooperate, TS100 intelligent temperature control between 100-400 degrees, instantaneous heating, automatic dormancy, overtemperature alarm, and other functions.* External independent power supply : DC5525 power interface, suitable for notebook DC12-24V power supply, car power and mobile power supply.* Micro USB interface: Through edit the parameter file, custom your own temperature curve and buttons function.* Additional features: Open source for writting your own App.

    $51.00 $47.94, Save 6% OFF

    SKU:TS100

    Weight: 0.30 kg

  • EV-PEAK E6 1S Lipo LiHV Battery Balance Charger For X-Racer X-1 Tiny Whoop Blade Inductrix Battery

    EV-PEAK E6 Something new from the EV-Peak. This EV-PEAK E6 balance charger comes with AC/DC dual input, supports LiPo batteries and LiHv batteries. It is suitable to charge the 1s lipo of X-Racer X-1, Tiny Whoop and Indutrix Blade. It chargers normal and/or HV Batteries and has 4 types of connectors. You can charge: classic Inductrix Batteries, PH 2.0, Molex 2p and more! or, JST, mCPX, MCX and MOLEX. This is not your common parallel charger. The batteries can be safely charged even having different voltage.Features:- Four-channel independent output, which can charge four batteries at the same time- AC / DC dual input - Simple operation, plug and play- Charge current is adjustable from 0.1A to 1A- LCD display real-time indicates the battery charge current and voltage- Supports LiPo batteries and LiHv batteriesSpecifications:AC input voltage:100V-240VDC input voltage:9.0V-12.0VCharge power: 4.35Wx4Charge current:(0.1-1.0A)x4Battery type:LiPo/LiHVBattery cell count:1S Indication:LCD display+LED lightSupport battery port:JST,mCPX,MCX,MOLEXDimension:120x120x50mmWeight:400g

    $41.99 $33.59, Save 20% OFF

    SKU:EPE6

    Weight: 0.70 kg

  • EV-Peak C4 80W 8Amp NiMH / LiPO Battery Balance Charger

    The C4 is the charger with HV Lipo capability in a fully featured AC powered charger. With a healthy 80W rating, It offers the convenience of direct AC power and the ability to operate from DC power in the field (e.g. car battery). Charges LiPo, LiIon, LiHV, LiFe, NiCd, NiMh, Pb battery types.Features:1.Create a safe charging condition and maximum reduce the danger caused by negligence or setting error of user.2.Synchronous buck&boost converter technology makes conversion efficiency up to 90%.3.Accept all typs of RC/Drone batteries: LiPo/LiLo/LiFe/NiMH/NiCd/Pb.4.Easy to operate5.Various of charging mode to meet different demand;6.Perform 1-5cycles of C>D or D>C continually for NiMH/NiCd refreshing.Specifications:AC Input voltage: 100-240VDC Input Voltage: 11-18VCharge Power: Max.80WDischarger Power: Max.10WCharge Current Range: 0.1-6.0ADischarge Current Range: 0.1-2.0ABalance Tolerance: ±0.01VLiPo/Li-Ion/LiFe/LiHV Battery Cell Count: 1-6 seriesNiCd/NiMH Battery Cell Count: 1-15 cellsPb Battery Voltage: 2V-24VWeight: 450gDimensions: 102*120*46mm

    $49.99 $43.99, Save 12% OFF

    SKU:EPC4

    Weight: 1.50 kg

  • EV-Peak CQ3 Multi Charger 4x 100W NiMH / LiPO with Built-in Balance

    The CQ3 is a powerful 4x charger. The charger can handle up to 4x different kinds of batteries at the same time. The 4x independent back-lit LCD screens makes charging cycles a breeze to start at different times. This charger includes a AC and DC power cable. Charge LiIon, LiPo, LiFe 1-6 series or NiCd, NiMH 1-15 cells with this fast charger.FeaturesAC/DC dual inputFour independent circuit support charging 4 different kinds of batteries at the same timeBuilt for for worldwide useOver loading protectionShort circuit protectionSpecificationsAC Input Voltage: 100-240VDC Input Voltage: 11-18VCharge Power: max.100W x4Discharger Power: max.10W x4Charge Current Range: 0.1-10.0A x4Discharge Current Range: 0.1-5.0A x4Balance Current: 400mA/cellLiPo/Li-Ion/LiFe Battery Cell Count: 1-6 SeriesNiCd/NiMH Battery Cell Count: 1-15 CellsPb Battery Voltage: 2V-24VWeight: 1750gDimensions: 220*240*68mmIncludes4x XT60 Charging Cable4x Balancing Adapter Board XH1x XT60 DC Input Cable1x AC Input Cable

    $159.99 $151.99, Save 5% OFF

    SKU:EPCQ3

    Weight: 3.00 kg

  • EV-Peak E4 50W 4Amp LiPO Battery Balance Charger

    Specifications:AC Input voltage: 100-240VCharge Power: Max.50WCharge Current: 4ABalance Current: 400mALiPo Battery Cell Count: 2-4sCharger connector plug: XH Balance plugWeight: 278gDimensions: 98*98*36mm

    $29.99 $28.79, Save 4% OFF

    SKU:EPE4

    Weight: 0.45 kg

  • EV-Peak E3 35W 3Amp LiPO Battery Balance Charger

    The E3 is an compact travel sized, intelligent battery charger. The charger can charge up to 35W (3A). The 4x LED Capacity indicator makes it a breeze to quickly charge. This charger includes a AC power cable. Charge LiPo battery cell count 2-4 series with this small charger.Specifications:AC Input Voltage:  100-240VCharge power:  35WCharge current:    3.0ABalance current:   300mALiPo battery cell count : 2-4 seriesIndication:   4x LED Capacity IndicationWeight : 150gDimensions:   72*117*38mm

    $19.99 $17.59, Save 12% OFF

    SKU:EPE3

    Weight: 0.35 kg

  • HobbyTiger BC-1S06 Lipo 6 Port Battery Charger Balance Quick

    An 1s lipo for the micro racers like X-Racer X-1 and Tiny Whoop only last for 3 to 5 minutes during the flying. It would be better if you have several extra batteries ready. But for an ordinary USB charger, it is just able to charge one lipo each time. With the HobbyTiger BC-1S06, we are now able to charge 6 1s lipos at once.Description:Item name: 6 Port Battery Balance ChargerInput voltage: DC 7-30V (12V/4A recommended)Cutoff voltage: 4.16V-4.24V per cellUSB output: 5V/3ACharge current: 6*500mADimension: 80x50x20mmLighting: chargingExtinguished: completedFlashing: no battery Features:Support 6 X 1s Li-po batteries charging at the same time.High charging efficiencyEnergy saving and environment protecting.Suitable for both charging outside or at home

    $24.99 $22.99, Save 8% OFF

    SKU:PABCC

    Weight: 0.30 kg

  • New Multi-functional FPVmodel Motor Grip Pliers For RC Models

    Welcome to a world where changing props is not longer a painstaking difficulty, these are the newest version of Motor grip pliers from FPVMODEL. These light weight aluminum pliers may look simple but they are quite deceptive and feature a wide array of uses. These pliers are designed with a rubber strap to protect the beauty of your expensive motors while gripping the bell tightly to allow for quick and efficient prop nut removal. Say good bye to propellers biting into your hands while trying to hold the bell and prop while removing the prop nut...these pliers hold it for you. Ever had a hard to remove lens cap on your FPV camera? The end of the pliers offer another set of teeth in the end of one handle that is design to grip the lens cap housing and allow for simple removal.  FPVMODEL motor grip pliers also feature a built in wrench made especially for antenna removal. If your switches on your transmitter become loose in the field, no worries, these pliers have an adapter on the end made just for tightening your transmitter switches and keeping up with quick and simple maintenance. Overall, this simple yet effective tool is designed for a wide array of uses and can help eliminate several tools in your flight pack just by having this multi use tool at your disposal. These pliers are compatible with a variety of motors...2204,2205,2206,2207,1306,1406,and 1806. So as you can see your most commonly used motors in FPV are covered by this one multi-use design. Specs:Item Name: Motor Grip PliersMaximum opening: 45mmWeight: 57gPackage Included:1 Motor Grip Pliers2 sets of rubber tape

    $18.99 $12.91, Save 32% OFF

    SKU:FMPCU

    Weight: 0.20 kg

  • FatShark FSV1814 18650 Li-Ion Cell Goggle Headset Battery Case

    The Fatshark 18650 Li-Ion cell headset battery case is a way of holding 2 18650 batteries (* Battery NOT included) to provide a 7.4V nominal voltage for use with existing FatShark goggles. Case will fit into the standard head strap like the standard FatShark battery packs. This allows you to have a large battery capacity when used with high capacity cells (batteries not included). Batteries should be removed and charged via a dedicated 18650 style charger.

    $15.99 $13.11, Save 18% OFF

    SKU:FSV1814

    Weight: 0.15 kg

  • FrSky M-9 Hall Sensor Gimbal For Taranis X9D & X9D Plus

    Upgrade your Taranis X9D with this plug-n-play high resolution M9 Gimbal from FrSky. The highly sensitive Hall sensors will not wear out quickly. It has an extremely smooth feel with the quad ball-bearings and the metal outer construction. Thicker 4mm stick ends give you a solid link to your controls. Fully adjustable tension and easily disable the self centering axis with one screw. This is a must have accessory for achieving those precision flight maneuvers. Spcification:Brand Name: FrskyModel: M9-GimbalItem Name: M9-Gimbal M9 Sensitivity Sensor GimbalSupply Voltage (VCC): DC 3.0 ~ ±0.5V Sensitivity: 2.50 mV/G Linear Output Voltage Range: 0.1 ~ (VCC +0.1) V Quiescent Output (TA = 25°C, B = 0 G): 0.5 × VCC Noise (no load): ≤40mVppFeatures: -Hall sensor-4 ball-bearings-Adjustable tension-Can be enable or disable self centering on both axis and ratcheting on the Y axis-Special material quality that wears well

    $24.99 $21.99, Save 12% OFF

    SKU:FSM9G

    Weight: 0.15 kg




Find us on Google+ Watch us on Youtube Like us on Twitter Follow us on Facebook

Home   |   About Us   |   New Products   |   Multi-Rotors   |   FPV Airplanes   |   FPV Equipment   |   Battery / Chargers   |   Tools & Accessories   |   Contact Us   |   Blog   |  Site Map

Product Tags: ABCDEFGHIJKLMNOPQRSTUVWXYZ0-9

Copyright © 2015 FPVMODEL.COM®. All Rights Reserved.