Special Sale Top 10

Sorted:
  • ZMR180 FPV Starter BNF Package

    ZMR 180 Carbon FPV Mini Quad - Full Review By BMSWebThe ZMR180 is a micro quad designed with "fun" in mind. Agile, quick, and small all fit together with this kit and its a blast to fly. Keeping simplicty in mind this frame has high quality 3mm bottom plate and a 1.5 mm top plate. Parts Included:1 x ZMR180 Frame4 x Dragonfly MC1806 2300KV Mini Motor 1 x X-Racer F4 Flight Controller1 x DYS XSD 20A 3-4S ESC1 x Effio-e 4140+811 1/3 CCD Camera1 x Dragonfly 5.8G 48CH Vtx10 Pairs x DYS 4040 3-Leaf Propeller1 x MATEK PDB XT60 with BEC 5V/12V1 x Dragonfly Booster 5.8G 3dBi TX/RX FPV Antenna RP-SMA1 x XT60 power plug connector MaleNote: The frame have color Black and Red. We send by random. If you have the specified color, please leave a message at the check out page, thank you!Note: The battery that shown in the pictures is not included in the ARF combos.

    $199.99 $129.99, Save 35% OFF

    SKU:ZMR180PTM1

    Weight: 1.20 kg

  • XBEE SR 220mm Frame Kit with PDB

    Size Guide · Wheelbase 220mm Features · Full Carbon Fiber. · 2mm Bottom Plate, 2mm Top Plate and 4mm arms · Matek PDB include(PDB-XPW W/ CURRENT SENSOR 140A & DUAL BEC) · Black steel screws(option titanium screws) · Weight : 75g(With titanium screws 71.5g) Includes · Carbon parts 4 x 4mm 5inch ARMs 2 x 2mm 5inch ARM Brace 1 x 1.5mm Arm Upper Plate 1 x 2mm Top Plate 1 x 2mm Bottom Plate 1 x 1.5mm Cam mount Plate 1 x 1.5mm Cam mount(Side) 2 x 1.5mm Camera mount Sidewall width 28mm 2 x 1.5mm Camera mount Sidewall width 29mm 1 x 1.5mm Battery Protector · Hardware 6 x Matt black standoff (4 x 28mm, 2 x 22mm) 8 x 3*5mm Metalbolt 4 x 3*12mm Metalbolt 4 x 3*15mm Metalbolt 4 x M3 rubber damper o ring 4 x M3*5 Nylon post 8 x M3 Nylon nut · Parts 1 x PDB-XPW W/ CURRENT SENSOR 140A & DUAL BEC 1 x XT60

    $79.00 $71.10, Save 10% OFF

    SKU:XBSR2F

    Weight: 0.50 kg

  • KL220 220mm Quadcopter ARF Combo

    The KL220 is another design following the design of simplicity.As per some customers feedback, we have changed this KL frame to the X design. It is sure to help keep the center of gravity where you want it, in the center. This frame also features aluminum mounting hardware that allows for faster arm changes. If an arm was accidentally damaged during a hard crash, it would be very easy for you to replace with a new arm.Using the same carbon fiber that you find in KL200race and our ZMR series frames, you can rest assured that this is NOT the run of the mill cheap eBay Carbon Fiber that most others sell. This CF is backed with our name so you can trust that it is top of the line. With the good reputation we have gained from KL200Race, we believe you will like this frame as well.Weight: 122grams (Frame and hardware totally) Before Ordering:1. The 5045 propellers that included in these ARF packages are sent by random. If you have special requirement for the colors, please leave message at the check out page, thank you. 2. The camera in the ARF combos is in PAL version. If you need the NTSC version, please leave message at the check out page, thank you.3. The camera in the ARF combos is Runcam Swift 600TVL FPV Camera. If you want to change to FOXEER ARROW V2 HS1190 camera, please leave message at the check out page, thank you.PackageParts IncludedQuantityRemarks KL220 220mm Quadcopter Frame Kit 1 set  Emax RS2205S 2300KV Motor4 pcs  DYS XSD 30A 3-6S ESC4 pcs ARF-1DYS 5045 3-Leaf Propeller CW+CCW 1 Pair4 pairs  BetaflightF3 Flight Controller1 pc  Runcam Swift 600TVL FPV Camera 1 pc  Dragonfly 5.8G 48CH 25/200/600mw VTX1 pc  Plastic Molded Mount for GoPro Session & Hero1 pcs  Dragonfly Booster 5.8G 5cm SMA Antenna 1 pc   and 3M double sided adhesive tapesilicon, velcro strap,   wires, straps, shrink tubes, XT60 plug etc     KL220 220mm Quadcopter Frame Kit 1 set     Emax RS2205S 2300KV Motor 4 pcs     LittleBee Spring 30A ESC Blheli-S Dshot 4 pcs   ARF-2 DYS 5045 3-Leaf Propeller CW+CCW 1 Pair 4 pairs     BetaflightF3 Flight Controller 1 pc     Dragonfly 5.8G 48CH 25/200/600mw VTX  1 pc     Runcam Swift 600TVL FPV Camera 1 pc    Dragonfly Booster 5.8G 5cm SMA Antenna 1 pc     and 3M double sided adhesive, Velcro strap, tapesilicon,wires, straps, shrink tubes, XT60 plug etc    KL220 220mm Quadcopter Frame Kit1 set  DYS SE2205 PRO 2300KV Motor4 pcs  LittleBee Spring 30A ESC Blheli-S Dshot4 pcs ARF-3DYS 5045 3-Leaf Propeller CW+CCW 1 Pair4 pairs (with DYS SE2205 motor)BetaflightF3 Flight Controller1 pc  Runcam Swift 600TVL FPV Camera 1 pc  Dragonfly 5.8G 48CH 25/200/600mw VTX1 pc  Plastic Molded Mount for GoPro Session & Hero 1 pcs  Dragonfly Booster 5.8G 5cm SMA Antenna 1 pc   and 3M double sided adhesive tapesilicon, velcro strap,    wires, straps, shrink tubes, XT60 plug etc     KL220 220mm Quadcopter Frame Kit 1 set     DYS SE2205 PRO 2300KV Motor 4 pcs     DYS XSD 30A 3-6S ESC 4 pcs   ARF-4 DYS 5045 3-Leaf Propeller CW+CCW 1 Pair 4 pairs   (with DYS SE2205 Motor ) BetaflightF3 Flight Controller 1 pc     Runcam Swift 600TVL FPV Camera 1 pc     Dragonfly 5.8G 48CH 25/200/600mw VTX 1 pc   Plastic Molded Mount for GoPro Session & Hero    1 pcs     Dragonfly Booster 5.8G 5cm SMA Antenna 1 pc      and 3M double sided adhesive tapesilicon, velcro strap,       wires, straps, shrink tubes, XT60 plug etc     * The battery and LED strips that shown in the pictures are not included in the ARF combos.

    $268.99 $247.47, Save 8% OFF

    SKU:KL220ARF

    Weight: 1.50 kg

  • ZMR210R 210mm Racing Quadcopter Frame Kit with PCB Board

    ZMR210R PID Tuning by The RCAddictThe ZMR210R is built for high performance FPV drone racing. We have listened to many experienced pilots and changed the bottom plate to one piece for exceptional strengh improvement. The ZMR210R is an evolution of the ZMR design, in keeping up with the changing times this ZMR was re-worked from the ground up. We are not just modifying the arms to give a "X" type of layout, we have re-worked it entirely to provide what the modern user wants. The ZMR210R is an airframe designed with strength in mind. This bare bones racers is a simple X style unibody design with a small footprint. Keeping strength in mind we have left out the cut outs that usually add weight reduction and an estetic appeal and decided wed make up the weight reduction by focusing on a smaller frame while leaving enough area to still comfortably install all the components for the build. This frame features routed edges that gives a smooth rounded surface to all edges of the carbon fiber which helps eliminate delaminated edging for those unavoidable strikes that everyone experiences....making this a perfet choice for those that are looking for a simple, durable, and lite frame.For your easy build, several ZMR210R ARF combos are also available to meet your specail requirements.Want to know more about ZMR210R? Join the discussion at the ZMR210 Owners Facebook Group! Weight: 117 grams (Frame and hardware totally ) Includes:1x 4mm Main Frame1x 2mm Top Frame1x Camera mount (for Foxeer Arrow V2 HS1190 or Runcam Swift style cameras. )1x Set of Steel screws, aluminum mounting hardware, and standoffs 1x Matek PDB 2x FPVModel velcro strapYou may also like: (Not Included) FPV Protection Kit for Mini Racing Quad

    $58.99 $54.27, Save 8% OFF

    SKU:ZMR210RP

    Weight: 0.50 kg

  • KL200Race Racing Quadcopter with PCB Board

    KL200RACE Brief Introduction & Flying FootagesUpdated on 01/09/2017: Added the plastic motor screw bumpers and battery protection plate to the frame kit. The same price, but better protection to motors and battery. Also, the 3D printed LED bar now comes with a slot for a better placing of LED inside. Introducing the FPVMODEL KL200RACE FPV racing quadcopter. It is a symmetric 200mm size airframe. The 200mm is measured motor shaft to motor shaft diagonally. This airframe is designed by FPVModel team pilot Ka Kei Leung and already a proven winner on the race track, with Ka Kei won multiple racing events while using this quad.The KL200RACE is built for FPV racing. It features a light-weight, symmetrical carbon fiber body. The frame has been stripped down to the bare essentials yet maintain the strength and durability. The weight is only 82 grams including the PDB and included hardwares.Two ways to place the LiPo battery. You can fly with your HD camera with the 3D printed GoPro mount, and strap the battery under the bottom plate. Or you can place the battery on the top plate if you are using the FPV camera, like HS1190. The angle of FPV camera mounting can be adjusted from 0 degree to 60 degree as per your desire. The KL200RACE frame also comes with a small LED strip to set at the back. With only one LED, your airframe will be shinning and stand out other racing quadcopters. The colors of LED can be set via Cleanflight.The KL200RACE is not with a "X" type layout but a butterfly like shape to avoid the PID setting problem of usual X frames. It utilizes high quality 3K carbon fiber that is precision machined for a superb fit-and-finish. This Carbon Fiber is backed by FPVmodels name so you can trust that it is top of the line.For your easy build, we have several KL200RACE ARF packages available.Specs & Features4.0mm Main Frame2.0mm Top Frame / 4.0mm Top Frame (Need to purchase seperately)Aluminum Anodized & Stainless Steel HardwareLight Shell with SMA Holder ComboGoPro Mount93 Grams only (Including Frame, PDB and Hardwares) Friendly reminder: The battery showed in the pictures is not included in the frame kit.The parts included in the frame kits. KL200Race is designed by FPVModel team pilot Kakei Leung and named after him. It has already a proven winner on the race track, with Kakei won multiple racing events while flying with this quad.

    $59.99 $37.19, Save 38% OFF

    SKU:KL200P

    Weight: 0.45 kg

  • DAYA 680 New 3K Carbon Frame

    Feature:The empty frame is made of high quality 3K carbon fiber , with the aluminum and connecting fittings made by CNC.It has the folding design,can be easily carried for its appearence like a piece of A4 paper. The wheelbase is standard X shape with 680mm. The inner space is huge with 85x24.5mm and the height is 22mm. It weights 476g,and 4mm-thickness aluminum alloy motor base not included. After several tests this frame comes with high flexibility and resistance to fall off. Aerial fhoto gimbal is installed with integral front suspension.Users can flexibly adjust the battery installation position according to gravity center.Motor: FPVMODEL MC4012 480KV Motor - 4piecesESC: Hobbywing XRotor-Pro-40A- 4piecesPropeller: 1447- 2pairs

    $159.00 $139.92, Save 12% OFF

    SKU:DY680

    Weight: 0.90 kg

  • ZMR250 4mm Carbon Fiber Arms for 1806/ 2204&2206 motor 2pc

      For the spare PDB for ZMR250 V2, buy it CLICK HERE >>> Known as the ZMR250, C250, QAV250, H250, Blackout Clone or the Mystery 250, whatever the real name is, ZMR250 carbon fiber frame is probally one of the most popular mini quad frames in this hobby. It is widely available, affordable and strong. However, the majority complaints come from the broken arms in crashes.Now here comes the replacement 4mm arms for ZMR250 mini quad frame, it will make you worry free with the flying of this carbon fiber mini quad frame. The arms are also suitable for your mini quad DIY. Price is for two arms, so buy as many as you need.Specifications:Thickness: 4mmLength: 115mm / 116mmQuantity: 2 pcs/kitSuitable for both ZMR250 and ZMR250 V2

    $6.90 $3.45, Save 50% OFF

    SKU:2MAP

    Weight: 0.10 kg

  • ZMR-X210 4mm Carbon Fiber spare parts

    Here comes the replacement 4mm arms for ZMRX-210 mini quad frame, it will make you worry free with the flying of this carbon fiber mini quad frame. The arms are also suitable for your mini quad DIY. Price is for two arms, so buy as many as you need.Specifications:Thickness: 4mmLength: 119mmQuantity: 2 pcs/kitSuitable for ZMR-X210Before Ordering: 210mm and 280mm arm means the  body diagonal size.Update History: 1. Update on March 28th, 2016: Here comes the spare parts for ZMR-X210. You can order what you need by yourself, thank you.2. Update on April 21st, 2016: Here comes the extended arms 280mm for ZMR-X210. With this arm,  you can install 7 inch propeller to your ZMR-X210.

    $6.90-$9.99

    SKU:X210CB

    Weight: 0.10 kg

  • ZMR-X210 V1.1 210mm Carbon Fiber Mini FPV Quadcopter ARF combo

    "ZMR-X210 FPV & Motorcross" by Titan Chan, FPVModel Sponsored PilotThe ZMR-X210 is an evolution of the zmr design, in keeping up with the changing times this zmr was re-worked from the ground up. We are not just modifying the arms to give a "x" type of layout, we have re-worked it entirely to provide what the modern user wants. This ZMR-X210 frame features aluminum mounting hardware that allows for faster arm changes. This frame also gives the user options for weight saving. By using a single bottom plate the user can opt for weight savings by leaving out the 4mm spacers and "2nd" bottom plate. (This saves weight by eliminating the use of one plate and 8 4mm spacers.) The weight savings can be crutial in times of attending races but the arms being sandwiched between two plates and using the 4mm spacers allows for exceptional strengh improvement too. The choice is up to the pilot...save the weight in times of racing or use both plates when flying free-style and expecting to crash frequently and desire strenth over a few grams of weight savings. Featuring an X design made popular by the likes of Alien and QAVraceblade/R this quad is sure to help keep the center of gravity where you want it, in the center.Before Ordering:1. The 5045 propellers that included in these combos are shipped at random. If you have a special requirement for the color, please leave the message at the check out page, thank you.2. The Dragonfly 5.8G 40CH Mini TX default to send 200mw.3. The camera and the figure pass should be welded on the PDB 12v, not the power electricity in case of damage to the camera and figure pass.4. The camera  4140+811 that included in the ARF packages is in PAL version, if you need the one in NTSC version, please leave your comments at the checkout page. Thank you.  HS1177 camera only in PAL version.5. The battery is not included in the ARF package.Update History: 1. Update on May 18th,2016 : The frame kit of ZMR-X210 has been upgraded to V1.1 version.2. Update on June 2nd, 2016: Change the LB20A into LB20A Pro.3. Update on June 29th, 2016: TheHS1177 camera that included in the ARF packages had been upgraded toHS1190.4. Update on July 20rd, 2016: The flight controller that included in the ARF packages had been upgraded to V3.1 version5. Update on  Septemder 26th, 2016: Change the LB20AP into LittleBee 20A-S BLHeli_S ESC.6. Update on January 13th,2017: Due to the Dragonfly 5.8G 40CH Mini TX 200mw was out of stock, now the TX have been updated to Aomway TX001 for free.7.Update on January 16th,2017: The ARF 4 & 5 ESC have been change to LittleBee Spring 30A ESC Blheli-S Dshot8. Update on February 6th,2017: Due to the  Aomway TX001 was out of stock, now the TX have been updated to Dragonfly 5.8G 48CH 25/200/600mw VTX.9. Update on February 13th,2017: Due to the CCW of EMAX RS2205 2300KV Motor have been sold out. The motor have been changed to Emax RS2205S 2300KV Brushless Motor.10. Update on March 13th,2017: Due to the X-RACER F303 Flight Controller V3.1 was out of stock, now the FC have been updated to BetaflightF3 Flight Controller .11. Update on March 14th,2017:   The camera 4140+811 that included in the ARF packages is in NTSC version,12. Update on April 14th,2017:   The 5.8G Gain Mushroom Omni Antenna that included in the ARF packages have been updated to Dragonfly Booster 5.8G 5cm SMA.PackageParts IncludedQuantityRemarks ZMR-X210 Mini Quadcopter Frame Kit1 set  EMAX RS2205S 2300KV Motor4 pcs  LittleBee 20A-S BLHeli_S ESC4 pcs ARF-1DALPROP T5045 3-Leaf Props 2 pairs6 pairs  BetaflightF3 Flight Controller1 pc  SONY Effio-e 4140+811 1/3 CCD 2.6mm Lens 700TVL camera 1 pc  Dragonfly 5.8G 48CH 25/200/600mw VTX 1 pc  Velcro Battery Strap  2 pcs  Dragonfly Booster 5.8G 5cm SMA1 pc   and 3M double sided adhesive tapesilicon,    wires, straps, shrink tubes, XT60 plug etc     ZMR-X210 Mini Quadcopter Frame Kit 1 set     EMAX RS2205S 2300KV Motor 4 pcs     LittleBee 20A-S BLHeli_S ESC 4 pcs   ARF-2 DALPROP T5045 3-Leaf Props 2 pairs 6 pairs   (No FPV Equipment) BetaflightF3 Flight Controller 1 pc     Velcro Battery Strap   2 pc     and 3M double sided adhesive tapesilicon,       wires, straps, shrink tubes, XT60 plug etc            ZMR-X210 Mini Quadcopter Frame Kit1 set  EMAX RS2205S 2300KV Motor4 pcs  LittleBee 20A-S BLHeli_S ESC4 pcs ARF-3DALPROP T5045 3-Leaf Props 2 pairs6 pairs (with HS1190 camera)BetaflightF3 Flight Controller1 pc  Foxeer Arrow HS1190 FPV Sony CCD WDR Camera 1 pc  Dragonfly 5.8G 48CH 25/200/600mw VTX 1 pc  Velcro Battery Strap  2 pcs  Dragonfly Booster 5.8G 5cm SMA1 pc   and 3M double sided adhesive tapesilicon,    wires, straps, shrink tubes, XT60 plug etc     ZMR-X210 Mini Quadcopter Frame Kit 1 set     DYS SE2205 Pro 2300KV Brushless Motor 4 pcs (Feb.28th)                    LittleBee Spring 30A ESC Blheli-S Dshot 4 pcs   ARF-4 DYS 5040 4-Leaf Propeller CW+CCW 6 pairs   (with DYS SE2205 Motor ) BetaflightF3 Flight Controller 1 pc     Foxeer Arrow HS1190 FPV Sony CCD WDR Camera 1 pc     Dragonfly 5.8G 48CH 25/200/600mw VTX 1 pc     Velcro Battery Strap   2 pcs     Dragonfly Booster 5.8G 5cm SMA 1 pc      and 3M double sided adhesive tapesilicon,        wires, straps, shrink tubes, XT60 plug etc      ZMR-X210 Mini Quadcopter Frame Kit1 set  EMAX RS2205 2300KV Motor4 pcs  LittleBee Spring 30A ESC Blheli-S Dshot4 pcs ARF-5DYS 5040 4-Leaf Propeller CW+CCW6 pairs (with EMAX2205 motor)BetaflightF3 Flight Controller1 pc  Foxeer Arrow HS1190 FPV Sony CCD WDR Camera1 pc  Dragonfly 5.8G 48CH 25/200/600mw VTX 1 pc  Velcro Battery Strap  2 pcs  Dragonfly Booster 5.8G 5cm SMA1 pc   and 3M double sided adhesive tapesilicon,    wires, straps, shrink tubes, XT60 plug etc     ZMR-X210 Mini Quadcopter Frame Kit 1 set     EMAX RS2205 2300KV Motor 4 pcs     DYS 30A Mini ESC 4 pcs   ARF-6 DYS 5040 4-Leaf Propeller CW+CCW 6 pairs   (with DYS 30A ESC) BetaflightF3 Flight Controller 1 pc     Foxeer Arrow HS1190 FPV Sony CCD WDR Camera 1 pc     Dragonfly 5.8G 48CH 25/200/600mw VTX 1 pc     Velcro Battery Strap   2 pcs     Dragonfly Booster 5.8G 5cm SMA 1 pc      and 3M double sided adhesive tapesilicon,        wires, straps, shrink tubes, XT60 plug etc     ARF1: with 4140+811 cameraARF3:with HS1190 cameraARF1ARF2ARF3: with HS1190 cameraARF4: with DYS SE2205 2300KV Brushless Motor and littlebee 30A ESCARF5: with EMAX RS2205 2300KV Brushless MotorARF6: with EMAX RS2205 2300KV Brushless Motor and DYS XM30A ESC* Battery is not included in the ARF combos.

    $252.99 $240.34, Save 5% OFF

    SKU:ZMR210ARF

    Weight: 1.20 kg

  • ZMR-X210 V1.1 210mm Carbon Fiber Mini FPV Quadcopter Frame Kit with PCB Board

    "ZMR-X210 FPV & Motorcross" by Titan Chan, FPVModel Sponsored PilotThe ZMR-X210 is an evolution of the ZMR design, in keeping up with the changing times this ZMR was re-worked from the ground up. We are not just modifying the arms to give a "X" type of layout, we have re-worked it entirely to provide what the modern user wants. This frame features aluminum mounting hardware that allows for faster arm changes. This frame also gives the user options for weight saving. By using a single bottom plate the user can opt for weight savings by leaving out the 4mm spacers and "2nd" bottom plate. (This saves weight by eliminating the use of one plate and 8 4mm spacers.) The weight savings can be crutial in times of attending races but the arms being sandwiched between two plates and using the 4mm spacers allows for exceptional strengh improvement too. The choice is up to the pilot...save the weight in times of racing or use both plates when flying free-style and expecting to crash frequently and desire strenth over a few grams of weight savings. Featuring an X design made popular by the likes of Alien and QAVraceblade/R this quad is sure to help keep the center of gravity where you want it, in the center.The ZMR-X210 ARF packages are also available for your easy setup.Includes:1x ZMR-X210 Carbon Fiber Frame4x 4mm Carbon Fiber Arms 1X camera mount for Foxeer Arrow V2 HS1190 and the cameras in similar size (26mm)1x Board Camera Mount 1x Set of Steel screws, aluminum mounting hardware, and standoffs 1x Matek PDB 2x FPVModel velco strap1x 1.5mm top plate 2x 2mm lower platesWeight: 174 grams (Frame and hardware totally ) Updated on May 18th, 2016: The ZMR-X210 has been upgraded to Version V1.1.V1.1   

    $52.99 $48.75, Save 8% OFF

    SKU:ZMR210VP

    Weight: 0.50 kg

  • ZMR180 V2 Mini Quad Frame Kit 4mm Arms w/PDB

    ZMR 180 Carbon FPV Mini Quad - Full Review By BMSWebThe ZMR180 is a micro quad designed with "fun" in mind. Agile, quick, and small all fit together with this kit and its a blast to fly. Keeping simplicty in mind this frame has high quality 4mm bottom plate and a 1.5 mm top plate. Using the same carbon fiber that you find in FPVMODELs ZMR250 V2, you can rest assured that this is NOT the run of the mill cheap eBay Carbon Fiber that most others sell. This CF is backed with FPVMODELs name so you can trust that it is top of the line. The ZMR180 is an awesome time to be had and you will find the smaller size can zoom through gaps that were previously not even considered with a 250 sized quad. The ZMR weighs in at 90g including the given mounting hardware and spacers allowing for an ultra-light weight build yet leaving plenty of build room for adding all necessary FPV gear. If you wanna add more muscle, pick the ZMR180 with the larger mounts for 22xx motors. ZMR180 Brief Build Manual: Click HereRecommended Parts (not included):Motor: 1806 /2204 /2206 (1806 for M2, 2204/2206 for M3, Suggest Use Dragonfly MC2206 2800KV Motors)Props: Dragonfly Bulletproof Bullnose 4045 PropsESCs: 12A -20AExtra standoffs: Click here (available in black, blue, silver and yellow)ARF Combo: //www.fpvmodel.com/zmr180-180mm-carbon-fiber-mini-fpv-quadcopter-arf-combo_g1066.htmlUpdate on June 15th, 2016: Update the standoffs. Will send out the V2 frame from today. V2V1

    $37.99 $26.59, Save 30% OFF 1

    SKU:ZMR180-4

    Weight: 0.50 kg

  • RTS200 200mm Mini Quadcopter ARF RTF Combo

    These are ARF combos of the new RTS200 200mm mini quad. The RTS200 is an excellent mini racing quad. It features fast, stable cross flight. Made of carbon fiber, the weight is light but very strong and you will no worry serious damage when crashing. Simple structure yet ensure you get a proper position for all your equipments put on. Reasonable design and precise detail equiped with our recomended equipments that make sure you get a super cool flying experience. This will be a good option for people who enjoy the fast violent crossing flying or air racing.The ARF combo inlcudes almost everything you need for the RTS200 building work. Its matched with our quality Dragonfly 1306 motor KV3100 motors and Dragonfly 12A ESC and you will get a fast violent flying. As per our internal test, the flight time is up to 12 minutes.The ARF combos will need you do the assembly work by yourself.  We also offer you the RTF option, the same parts as ARF but we will help you do the assembly and you just need simple connection then you are ready to fly.The total with recommended equipments (with battery): 354 gUpdate on 19th May : For reinforcing the frame strength, two extra light and strong arm carbon fieber plates will be included. The plates are exactly the same size on it contrast to the plane mounting holes. The frame strength is improved with the plates and you are more easily to enjoy the mini race quad.Update on August 8th,2016 : The Aomway mini 200mw TX has been changed to Dragonfly 5.8G 40CH Mini TX 200mw.Recommended PIDRecommended battery: 3s 1500mah (Not included in the pacakges)Package includes:RTS200 mini 200mm quad frame kit x 1Dragonfly 1306 kv3100 motor ( CW+CCW) x 44045  Electric Prop CW/CCW x 8 parisDragonfly 12a ESC x 4X-Racer F303 Flight Controller V2.1x 1 Dragonfly 5.8G 40CH Mini TX 200mw x 1Aomway CMOS 600TVL Mini Camera ( NTSC or PAL optional) x 15.8G Gain Mushroom Omni Antenna x 1SMA Male to SMA Female 90 degrees L Connector x 1VHB 3M Ultrathin Double Sided Adhesive Tape x 1And silicon wires, T-plug accessories etc, the battery is not included in the packageARF/ RTF without FPV equipments  including :RTS200 mini 200mm quad frame kit x 1Dragonfly 1306 kv3100 motor ( CW+CCW) x 44045  Electric Prop CW/CCW x 8 parisDragonfly 12a ESC x 4X-Racer F303 Flight Controller V2.1x 1 VHB 3M Ultrathin Double Sided Adhesive Tape x 1And silicon wires, T-plug accessories etc,the battery is not included in the packageUpdate on May 9th, 2016: The flight controller have been changed to X-Racer F303.Building Instructions:  RTS200 200MM Mini Quadcopter Build Instructions

    $199.00 $163.18, Save 18% OFF

    SKU:Q200-ARF1

    Weight: 0.80 kg




Find us on Google+ Watch us on Youtube Like us on Twitter Follow us on Facebook

Home   |   About Us   |   New Products   |   Multi-Rotors   |   FPV Airplanes   |   FPV Equipment   |   Battery / Chargers   |   Tools & Accessories   |   Contact Us   |   Blog   |  Site Map

Product Tags: ABCDEFGHIJKLMNOPQRSTUVWXYZ0-9

Copyright © 2015 FPVMODEL.COM®. All Rights Reserved.