Sorted:
  • X-Racer X9 Micro Racing Quad BNF

    Following the X-Racer KL-EX90, FPV Model now has another 2" propeller 90 class micro racer. The ultralight micro racer comes with Runcam Micro Swift CCD camera which is the smallest FPV camera that use 1/3" CCD sensor in FPV community. No more blurry and dull image like youll have on other micro class. You will get the same good quality video on this micro racer like you did with normal Runcam Swift.Micro class FPV racing is more and more popular. Comparing to the regular 5" racing quads, these little stuff have many advantages. You can fly or race with them at anytime any where you like. Because they are so light in weight and so small in size, you do not need to register with FAA if you are from the United States to fly them.Equipped with the mini Raceflight Millivolt flight controller and Raceflight Spark 4n1 ESC, you will gain the best performance that you never had before. The Millivolt presents not only the BEST performance, but also the most STABLE performance due to the amazing vibration rejection technology implemented in RaceFlight. In addtion to these, the X9 is equipped with the powerful Dragonfly MC1105 7500KV motors which has been proven very powerful with X-Racer KL-EX90. Features:Small in size and light in weight. All-up-weight is 83 grams only without battery. Do not require the hassles of getting it registered with the FAA if you are from the United States.Excellent power with just a 2S battery. (Support 2s only)Fast as other 5" 4S racing quads. Use Runcam Micro Swift, the worlds smallest and lightest CCD professional camera. It has the same performance to reputable Runcam Swift and Swift Mini.Equipped with the mini Raceflight Millivolt flight controller and Raceflight Spark 4n1 ESC. The Millivolt presents not only the BEST performance, but also the most STABLE performance due to the amazing vibration rejection technology implemented in RaceFlight. .Equipped with powerful and reliable micro Dragonfly MC1105 7500kv brushless motors. Gemfan 2035BN 4-blade propellers are almost unbreakable, extremely smooth and guaranteed to exceed your expectations.A Dragonfly 25mw 48ch Vtx with protective coating is inlcuded to give an even more aero dynamic low profile design for the video transmission. Parts Included:1 x X-Racer X9 Frame4 x Dragonfly MC1105 7500kv Motor1 x Raceflight Millivolt Flight Controller1 x Raceflight Spark 4n1 ESC1 x RunCam Micro Swift FPV Camera1 x Dranonfly5.8g25MW 48CH4 Pairs x GemFan 2035BN 4-Blade Propellers1 x 16AWG Silicon Wire1 x Amass XT30 Plug Male1 x CJMCU WS2812 5050 RGB LED Board1 x 3D Prints Camera Mount1 x 3D Prints Taillight Mount16 x M2*4 Screws16 x M2*6 Screws10 x M2*7 Screws4 x M3*18 Screws7 x M2*19 Aluminum Standoff10 x M3 Black Nylon NutDragonfly MC1105 Mini Motor Specifications:KV: 7500KVNo.of Cells(Lipo)): 2S-4SStator Diameter: 11mmStator Length: 5mmShaft Diameter: 1.5mmMotor Dimensions(Dia.*Len): Φ14.2×14.45mmWeight (g): 5.9gPropeller: Gemfan 2-3″ESC: 12A

    Review: Write a Review

    $239.99

    SKU:X9BNF

    Weight: 0.30 kg

  • X-Racer KL-EX90 Micro Racing Quad BNF

    KL-EX90 Indoor FPVX-Racer KL-EX90 LOS Maiden Flight By the RCAddict*** Before Purchasing: The KL-EX90 does not come with the receiver. If you are using the Frsky transmitter, we suggest use FrSky XM 16 Ch Micro SBUS Receiver. If you are using other RC transmitters, you will use other mini transmitters accordingly.The KL-EX90 is a 2" propeller 90 class airframe built for micro class FPV racing. All-up-weight is just 106 grams with a 2S 550mAh lipo battery. Because it is so small in size and so light in weight that under 250g, you do not need to register with FAA if you are from the United States to fly the KL-EX90.Equipped with the reputable Gemfan BN2035 propellers, Flycolor RAPTOR S-Tower ( set of F3 Flight Controller and 4-in-1 ESC), Dragonfly MC1105 7500KV motors, Runcam Micro Swift camera, and built-in OSD, all make the KL-EX90 perfect for both LOS (Line of Sight) and FPV (First Person View) players.We have two combos for you: One is the BNF combo, the other is the ARF DIY combo, the DIY combo with all the BNF parts included. Here comes the BNF combo. If you prefer a ARF, please click here!Features:Small in size and light in weight. All-up-weight is 106 grams only with a 2S 550mAh lipo battery. Do not require the hassles of getting it registered with the FAA if you are from the United States.2s / 3s lipo. Excellent power with just a 2S battery, even more powerful with 3S. It gives you very high speed, very precise and rail-like handling.Fast as other larger racing quads. Our team pilot Ka Kei Leung finished the drone race at WMC 2017 in 9.65 sec. Click to watch the video.Use Runcam Micro Swift, the worlds smallest and lightest CCD professional camera. It has the same performance to reputable Runcam Swift and Swift Mini.The reputable Flycolor RAPTOR S-Tower of F3 FC and 4-in-1 BLHeli_S 2-3S ESC gives you extremely good stability and flight performance.Equipped with powerful micro Dragonfly MC1105 brushless motors. Works great with Gemfan BN2035 propellers and Flycolor RAPTOR S-Tower.A Dragonfly 25mw 48ch Vtx with protective coating is inlcuded to give an even more aero dynamic low profile design for the video transmission. The flight controller is with built-in OSD.The design is inspired by the champion KL200Race racing drone. Much smaller in size, but gives you the same flying experience of professional 200 and 210 class racing drones.Recommend 2S PID Setting:ROLL   P 48 I 50 D 29PITCH  P 53 I 55 D 27YAW    P 67 I 58 D  TPA 0.12Recommend 3S PID Setting:ROLL   P 24 I 48 D 18PITCH  P 35 I 50 D 23YAW    P 70 I 48 D  TPA 0.2Dragonfly MC1105 Mini Motor Specifications:KV: 7500KVNo.of Cells(Lipo)): 2S-3SStator Diameter: 11mmStator Length: 5mmShaft Diameter: 1.5mmMotor Dimensions(Dia.*Len): Φ14.2×14.45mmWeight (g): 5.9gPropeller: Gemfan 2-3″ESC: 12APackage including:1 x KL-EX90 Frame4 x Dragonfly MC1105 Motor1 x Flycolor RAPTOR S-Tower1 x RunCam Micro Swift FPV Camera1 x Dranonfly5.8g25MW 48CH8pairs x GemFan 2035BN 4-Blade Propellers1 x Orignal Amass XT30 Plug Male1 x CJMCU WS2812 5050 RGB LED Board1 x 3D Prints Camera Mount1 x 3D Prints Taillight Mount20 x M2*4 Screws12 x M2*6 Screws8 x Motor ScrewsBefore Purchasing:1. The camera in the BNF combos is in PAL version. If you need the NTSC version, please leave message at the checkout, thank you.2. We send the white version of 3D printed part in the BNF combos if without special instructions. If you prefer another color, please leave message at the checkout, thank you.The KL-EX90 is a 2" propeller 90 class airframe built for micro class FPV racing. All-up-weight is just about 106 grams with a 2S 550mAh lipo. Because it is so small in size and so light in weight that under 250g, you do not need to register with FAA if you are from the United States to fly the KL-EX90.Four colors available for the 3D printed parts to show your personality and stand out from the crowd. We will send the white version if without instruction. If you prefer another color, please let us know.Compact design, suitable for both indoor and outdoor FPV. Equipped with F3 Flight Controller, 4-in-1 ESC,  powerful 1105-7500kv motors, Runcam Micro Swift FPV camera, Dragonfly 25mw 48ch vTX and LED light, all these have made the KL-EX90 perfect for both LOS and FPV flyers. A Dragonfly 25mw 48ch Vtx is inlcuded to give an even more aero dynamic low profile design for the video transmission. The 48CH allows several flyers to race at the same time without worry about the signal interference during racing. The VTX is not directly put on the top plate, but into the hollow part of top plate for a better protection. It comes with protective coating to prevent from moisture ingress, while still easy for the users to shift the channels and less heat.The KL-EX90 uses reputable Flycolor RAPTOR S-Tower of F3 FC and 4-in-1 BLHeli_S 2-3S ESC gives you extremely good stability and flight performance.Use Runcam Micro Swift, the worlds smallest and lightest CCD professional camera. It has the same performance to the well-known Runcam Swift and Swift Mini.Equipped with powerful micro Dragonfly MC1105 7500kv brushless motors. Works great with Gemfan 2035BN propellers and Flycolor RAPTOR S-Tower. The Gemfan 2035BN propellers are extremely durable and smooth. Here we include three more sets in the BNF, so you will never need to worry about the damage to the props.For the users who are new to FPV, we have an option of with prop protection cover. It will greatly reduce the damage to KL-EX90 in case there is a hard crash.The design of KL-EX90 is inspired by the champion KL200Race racing quad. Much smaller in size, but gives you the same flying experience of professional 200 and 210 class racing drones.

    Review: Write a Review

    $189.99-$192.99

    SKU:KL90BC

    Weight: 0.30 kg

  • X-Racer X-1 BNF with Two Batteries

    X-Racer X-1 Build & BindingNote: Due to the air regulation, the batteries can only be shipped to following countries by E-packet:Canada, Australia, France, Germany, United Kingdom and United States. By Registered Airmail Shipping: Japan, Brazil and Russia.  If you are from other countries or areas, please help to choose DHL for shipping.Agile, safe and fun. The X-Racer X-1 is an ultra-micro FPV drone designed for indoor flying in even the smallest of places. It is an amazing gift to both the first time pilot and advanced pilots.  We have two combos for you: One is the FPV Ready Bind-n-Fly version without transmitter, the other is the DIY combo with all the BNF parts included.  No soldering or 3D printing required for both of the two combos! DIY Combo: If you like Do it Yourself,  choose the DIY combo, the assembly is simple and quick.  Click Here.  BNF Combo: We understand that some of you just want to fly and enjoy the race. So you can also just choose the BNF version and leave all the assembly & testing job to us. The BNF version is a fully assembled kit and it is fully tested before shipping. All firmwares are loaded and customers just need to bind with their Frsky transmitter and enjoy the flight.Main Features:1. Pre-flashed with the latest Betaflight firmware. 2. Micro 5.8g 48ch Vtx. 3. FC is compatible with FrSky & SBUS, USB port ready.4. Micro FPV HD Camera.5. The case is available in various colors. (Blue, Gray, Yellow, Rose, optional )6. The BNF version is completely assembled that just need to bind with the Taranis then fly.7. No soldering or 3D printing required.Package Included in BNF Combo :X-Racer X-1 Frame x 1X-Racer X-1 Cover x 1 (Blue, Grey, Yellow, Rose, optional)Set of Flight Controller, Camera, TX and Antenna x 1 (Pre-soldered, Camera in PAL format)X-Racer HV 1S 250mah 3.8v 60C Hight Voltage Battery x 2 Dragonfly 7x16mm 14000KV Coreless Motor for X-Racer x 4 (2cw + 2ccw)X-Racer 31mm 4 Blade Clear Propellers x 8 (4cw + 4ccw)X-Racer X-1 USB charger x 1You might also like: HobbyTiger BC-1S06 Lipo 6 Port Battery Charger or 4 Ports 1S Lipo Charger With XT60 Plug

    Review: Write a Review

    $79.99

    SKU:X1FC

    Weight: 0.40 kg

  • BetaflightF3 Flight Controller

    BetaflightF3 Flight Controller | REVIEW AND HOW TO by Joshua Bardwell*** If you are from the United States, please directly order at our US website (Shipping in the USA only), still some available in stock. CLICK HERE to buy!!!BetaflightF3 is the flight controller designed to use every possible feature of Betaflight. More than the last half year has been spent in development. Boris B has worked with us to go over features and design aspects to help give us insight into what betaflight users want/need. This board features a 3A power draw giving users extra room for added attachments through uart ports. The six layer PCB is a more expensive design approach but was needed to give the ability to have a PDB that was capable of having wiring pads on both the top and bottom of the board. By using the six layer design we were able to increase the size of the pads and work around all the components all the while giving esc connections in the corners of the board rather than bunching all connections on either the top OR the bottom. Featuring a fully functioning OSD that can be configured in Betaflight this board will make configuring your OSD a breeze. The team at betaflight have been hard at work developing DSHOT and this board is also compatible with the latest release. But we didn’t stop there, this board also features a micro adapter to accept TF cards for those of you that like to follow up your flights with reviewing black box logging...we think we know of at least one guy that will like that. FeaturesIntegrated PDBBuilt in OSD customizable via Betaflight OSDCurrent sensorIntuitive layoutSD card slot for BlackBoxTailored to support BetaflightWhen running 8K/8K, CPU usage remains lowSpecificationsF3 ProcessorMPU6000 Gyro/ACC SensorBEC Max current 5V 2ABuilt in OSD – configurable via Betaflight GUISD Card adapter for BlackBoxCurrent sensorPower distribution board with six-layer PCBOSD Max Current: 145AWeights 8.6g***Note: Please do not connect to any equipment with the loading over 1.5A.Friendly Reminder: Choosing your power supply for video is relatively simple. Betaflight FC has two options, 5v and battery voltage. Choose your camera voltage by jumping RAM with either the 5V solder section or the Vbat solder section. (its recommended to use Vbat, Most cameras and Video transmitters can run off battery voltage) If using 5v it is recommeded to only power your camera and get the power for Vtx from another source. 

    Review: Write a Review

    $42.99

    SKU:BFF3

    Weight: 0.10 kg

  • ZMR210R 210mm Racing Quadcopter Frame Kit with PCB Board

    ZMR210R PID Tuning by The RCAddictThe ZMR210R is built for high performance FPV drone racing. We have listened to many experienced pilots and changed the bottom plate to one piece for exceptional strengh improvement. The ZMR210R is an evolution of the ZMR design, in keeping up with the changing times this ZMR was re-worked from the ground up. We are not just modifying the arms to give a "X" type of layout, we have re-worked it entirely to provide what the modern user wants. The ZMR210R is an airframe designed with strength in mind. This bare bones racers is a simple X style unibody design with a small footprint. Keeping strength in mind we have left out the cut outs that usually add weight reduction and an estetic appeal and decided wed make up the weight reduction by focusing on a smaller frame while leaving enough area to still comfortably install all the components for the build. This frame features routed edges that gives a smooth rounded surface to all edges of the carbon fiber which helps eliminate delaminated edging for those unavoidable strikes that everyone experiences....making this a perfet choice for those that are looking for a simple, durable, and lite frame.For your easy build, several ZMR210R ARF combos are also available to meet your specail requirements.Want to know more about ZMR210R? Join the discussion at the ZMR210 Owners Facebook Group! Weight: 117 grams (Frame and hardware totally ) Includes:1x 4mm Main Frame1x 2mm Top Frame1x Camera mount (for Foxeer Arrow V2 HS1190 or Runcam Swift style cameras. )1x Set of Steel screws, aluminum mounting hardware, and standoffs 1x Matek PDB 2x FPVModel velcro strapYou may also like: (Not Included) FPV Protection Kit for Mini Racing Quad

    Review: Write a Review

    $58.99

    SKU:ZMR210RP

    Weight: 0.50 kg

  • X-Racer KL-EX90 Micro Racing Quad Frame Kit

    KL-EX90 Indoor FPVX-Racer KL-EX90 LOS Maiden Flight By the RCAddictThe KL-EX90 is a 2" propeller 90 class airframe built for micro class FPV racing. All-up-weight is just 106 grams with a 2S 550mAh lipo battery. Because it is so small in size and so light in weight that under 250g, you do not need to register with FAA if you are from the United States to fly the KL-EX90.The price is for frame kit only, including the 3D printed parts. If you like the complete set, we have two combos for you: One is the BNF combo, the other is the ARF DIY combo.Package Includes:1 x KL-EX90 Frame1 x 3D Printed Camera Mount for Runcam Micro Swift 1 x 3D Printed Taillight Mount8 x ScrewsYou might also need (not included): Dragonfly MC1105 MotorFlycolor RAPTOR S-TowerRunCam Micro Swift FPV CameraDranonfly5.8g25MW 48CHGemFan 2035BN 4-Blade PropellersOrignal Amass XT30 Plug MaleCJMCU WS2812 5050 RGB LED BoardThe design of KL-EX90 is inspired by the champion KL200Race racing quad. Much smaller in size, but gives you the same flying experience of professional 200 and 210 class racing drones.

    Review: Write a Review

    $18.99

    SKU:KL90FKD

    Weight: 0.30 kg

  • ***Pre-order***XBEE SR Hybrid 220mm Frame Kit with PDB

    Note: Taking pre-orders on this frame. The expected shipping date is early August.Size Guide · Wheelbase 220mm Features · Full Carbon Fiber. · 2mm Bottom Plate, 2mm Top Plate and 4mm arms · Matek PDB include(PDB-XPW W/ CURRENT SENSOR 140A & DUAL BEC) · Black steel screws(option titanium screws) · Weight : 80.4g(With titanium screws 76.9g) Includes · Carbon parts 2 x 4mm 5inch Front ARMs 2 x 4mm 5inch Rear ARMs 2 x 2mm 5inch ARM Brace 1 x 1.5mm Arm Upper Plate 1 x 2mm Top Plate 1 x 2mm Bottom Plate 1 x 1.5mm Cam mount Plate 1 x 1.5mm Cam mount(Side) 2 x 1.5mm Camera mount Sidewall width 28mm 2 x 1.5mm Camera mount Sidewall width 29mm 1 x 1.5mm Battery Protector · Hardware 6 x Matt black standoff (4 x 28mm, 2 x 22mm) 8 x 3*5mm Metalbolt 4 x 3*12mm Metalbolt 4 x 3*15mm Metalbolt 4 x M3 rubber damper o ring 4 x M3*5 Nylon post 8 x M3 Nylon nut · Parts 1 x PDB-XPW W/ CURRENT SENSOR 140A & DUAL BEC 1 x XT60

    Review: Write a Review

    $81.00

    SKU:XBSRHF

    Weight: 0.50 kg

  • ***Pre-order***XBEE SR 220mm Frame Kit with PDB

    Note: Taking pre-orders on this frame. The expected shipping date is early August.Size Guide · Wheelbase 220mm Features · Full Carbon Fiber. · 2mm Bottom Plate, 2mm Top Plate and 4mm arms · Matek PDB include(PDB-XPW W/ CURRENT SENSOR 140A & DUAL BEC) · Black steel screws(option titanium screws) · Weight : 75g(With titanium screws 71.5g) Includes · Carbon parts 4 x 4mm 5inch ARMs 2 x 2mm 5inch ARM Brace 1 x 1.5mm Arm Upper Plate 1 x 2mm Top Plate 1 x 2mm Bottom Plate 1 x 1.5mm Cam mount Plate 1 x 1.5mm Cam mount(Side) 2 x 1.5mm Camera mount Sidewall width 28mm 2 x 1.5mm Camera mount Sidewall width 29mm 1 x 1.5mm Battery Protector · Hardware 6 x Matt black standoff (4 x 28mm, 2 x 22mm) 8 x 3*5mm Metalbolt 4 x 3*12mm Metalbolt 4 x 3*15mm Metalbolt 4 x M3 rubber damper o ring 4 x M3*5 Nylon post 8 x M3 Nylon nut · Parts 1 x PDB-XPW W/ CURRENT SENSOR 140A & DUAL BEC 1 x XT60

    Review: Write a Review

    $79.00

    SKU:XBSR2F

    Weight: 0.50 kg

  • ***Pre-order***XBEE 230mm FreeStyle Frame Kit with PDB

    Note: Taking pre-orders on this frame. The expected shipping date is early August.Size Guide · Wheelbase 230mm Features · Full Carbon Fiber · 2mm Bottom Plate, 2mm Top Plate and 4mm arms · Matek PDB include(PDB-XT60 w/BEC 5V & 12V) · Black steel screws · Weight : 102g Includes · Carbon parts 4 x 4mm 5.5inch ARMs 1 x 2mm Top Plate 1 x 2mm Bottom Plate 1 x 1.5mm Arm Upper Plate 2 x 1.5mm Camera mount Sidewall for XAT(28mm) 2 x 1.5mm Camera mount Sidewall for ARROW(29mm) 2 x 1.5mm Cam Mount (angle 25) 1 x 1.5mm Cam Mount Plate 1 x 1.5mm Antenna Mount 1 x 2mm Front Bumper · Hardware 4 x 35mm Matt black standoff 2 x 33.5mm Matt black standoff 2 x 22mm Matt black standoff 12 x 3*5mm Metal bolt 4 x 3*8mm Metal bolt 5 x 3*10mm Metal bolt 4 x 3*15mm Metal bolt 4 x M3*5 Nylon post 8 x M3 Nylon nut · PDB parts 1 x PDB-XT60 w/BEC 5V & 12V 1 x XT60

    Review: Write a Review

    $99.00

    SKU:XB230F

    Weight: 0.50 kg

  • Betaflight 32Bit 35A 2-6S BLHeli_32 ESC Dshot1200

    We are at it again and the guys at Betaflight, FPV Model, BLHeli, and Airbot have come together to create a version of BLHeli_32 ESCs that FPV Model hopes will not disappoint. Introducing a fresh take on an ongoing development with BLHeli_32 we are introducing BetaBees, BlHeli_32 ESCs designed in conjunction with Airbot.BLHeli_32 is the third generation BLHeli code, following base BLHeli and BLHeli_S. It runs on an ARM 32bit MCU, initially it will be on a Cortex-M0 running at 48MHz, but there are MCUs out there that can run a lot faster.  BLheli_32 can run input signals with lower latency at faster rates. Dshot up to at least Dshot1200, and at rates up to at least 32kHz is now supported.Here is what BLHELI_32 has to say about their new "Power to perform":Programmable PWM frequency of up to 48KHzAuto-timing for higher efficiency and reliabilityVoltage/Current limitingAdjustable “Brake on Stop” forceImprove direction change in Bidirectional modeESC TelemetryConfiguring from FC using DShot commandsFeatures: Built in Current SensorExtra capacitors to help smooth noisy envrionments.Customizable color choice RGB LED using Blheli_32 software.Large positive and ground pads for easy soldering. 2-6s Lipo input35A continuous current  (can handle burst above 45A but please be reasonable, do not overwork  your motors)TX pad on ESC used for Telemetry pad. Specifications :Input: 2-6s LiPolyConstant: 35 AmpsBurst: 45 AmpsBEC: No BEC, OPTO onlyDimensions: 34x16x7mmWeight: 6g (without motor wires)Includes:1 x Betaflight BLHeli_32 35A ESC1 x 16AWG Red Silicon Wire 10cm1 x 16AWG Black Silicon Wire 10cm3 x 20AWG Black Silicon Wire 10cm1 x 26AWG Red Silicon Wire 10cmSome Tips:BLHeli_32 ESC Firmware OverviewHow to Connect BLHeli_32 ESC to Congigurator BLHelisuite32 via FC PassthroughWhat is Dshot1200 and Why Dshot1200 is Better?How to Get Dshot1200 Running in Betaflight?Downloads:Download the latest BLHeli_32 Configurator here.Download the BLHeli_32 User Manual here.Download Pre-release version of Betaflight 3.2.0 here.

    Review: Write a Review

    $18.99

    SKU:BFESC

    Weight: 0.10 kg

  • $14.99

    SKU:EARTP

    Weight: 0.20 kg

  • $12.99

    SKU:EATP

    Weight: 0.20 kg




Find us on Google+ Watch us on Youtube Like us on Twitter Follow us on Facebook

Home   |   New Products   |   Multi-Rotors   |   FPV Airplanes   |   FPV Equipment   |   Battery / Chargers   |   Tools & Accessories   |  Site Map

Product Tags: ABCDEFGHIJKLMNOPQRSTUVWXYZ0-9

Copyright © 2015 FPVMODEL.COM®. All Rights Reserved.