Sorted:
  • ZMR Eclipse 210mm ARF for Advanced Users

    Brief Setup Guide of ZMR EclipseZMR Eclipse is a new 210mm carbon fiber mini quadcopter that designed based on the hot selling ZMR-X210. We are always listenting to what our customers say and made some slight changes to make it a better racing frame. For your easy setup, also considering on different users might have different requirements on the setups, we have prepared three different ARF packages of ZMR Eclipse for different levels of users, including:ZMR Eclipse ARF for FPV BeginnersZMR Eclipse ARF for Intermediate UsersZMR EClipse ARF for Advanced UsersThese are the ARF packages of ZMR Eclipse that specially prepared for serious advanced users. You are choosing these because you are very strict with the performance of your racing quads. To meet your expectations, we use Betaflight F4 AIO flight controller, one of the most reputable FCs in FPV community, on the builds. Better performance and easy to setup. Easy wiring, no need to use an extra PDB.In order to have a better compatible with Betaflight F4, we have changed to use Betaflight 35A 32bit BLHeli ESC. These ESCs have a soldering along the edges to allow more power going through. No need to worry about how much power you will give to them during flying.As to FPV camera, we use a better professional FPV camera, the RunCam Eagle 2. It is probably one of the best FPV cameras out there in terms of image quality and WDR capability. It has a clearer and better image, allowing the pilot to clearly obeserve the tiny objects even flying through a complex area, very suitable to use it for FPV racing.For the propellers, we have changed to use DalProp 5040. Many top pilots use these propellers for FPV racing! In general, comparing to the ARF packages for beginners and intermediates, the ARF packages for advanced users use the best flight controllers, ESCs, FPV camera and propellers to ensure the best performance. Furthermore, the weight have been saved a lot, the installation has been simplified.ARF 1 Including:ZMR Eclipse 210mm Carbon Fiber Mini FPV Quadcopter Frame Kit  * 1 setDragonfly Hurricane 2207 KV2500 Brushless Motor * 4 pcsBetaflight 32Bit 35A 2-6S BLHeli_32 ESC Dshot1200 * 4 pcsBetaflightF4 Flight Controller * 1 pcDALPROP Q5040 4-Leaf Props * 8 pairsAccessories Bag * 1 setARF 2 Including:ZMR Eclipse 210mm Carbon Fiber Mini FPV Quadcopter Frame Kit * 1 set RunCam Eagle 2 FPV Camera * 1 pcDragonfly Hurricane 2207 KV2500 Brushless Motor * 4 pcsBetaflight 32Bit 35A 2-6S BLHeli_32 ESC Dshot1200 * 4 pcsBetaflightF4 Flight Controller * 1 pcDragonfly 5.8G 48CH Stackable Video Transmitter * 1 pcDragonfly Transmitting Extension Cables * 1 pcDragonfly Booster 5.8G FPV Antenna 5cm SMA * 1 pcDALPROP Q5040 4-Leaf Props * 8 pairsAccessories Bag * 1 setARF1 Including:ARF2 Including:

    $179.99-$249.99

    SKU:ZMARF4

    Weight: 0.50 kg

  • ZMR Eclipse 210mm ARF for Intermediate Users

    Brief Setup Guide of ZMR EclipseZMR Eclipse is a new 210mm carbon fiber mini quadcopter that designed based on the hot selling ZMR-X210. We are always listenting to what our customers say and made some slight changes to make it a better racing frame. For your easy setup, also considering on different users might have different requirements on the setups, we have prepared three different ARF packages of ZMR Eclipse for different levels of users, including:ZMR Eclipse ARF for FPV BeginnersZMR Eclipse ARF for Intermediate UsersZMR EClipse ARF for Advanced UsersCongratulations. You are now no longer an FPV newbie!!! Since that the ARF packages for beginners can not meet your requirements any more, you need a better setup. And these intermediate ARF packages are just made for you!We have made these ARF packages with a more powerful setting and comes with a better FPV image. The frist step, we have changed the motors to Dragonfly Hurricane 2207 2500kv motors. More powerful and faster respond speed. To match the motors, we have changed the ESCs to Robotdog as well. Robotdog is a 35A 32bit BLHeli_32 ESC, it supports Dshot1200 to ensure you a smooth flying.Considering the speed is now greatly improved, you have a higher requirement for the camera images. So we have changed the FPV camera to Runcam Swift 2. It is a professional FPV camera even no need to worry about backlight during flying.With the these setup, now you can try to join your local FPV community and race with other pilots. Maybe you are the next FPV champion.ARF 1 Including:ZMR Eclipse 210mm Carbon Fiber Mini FPV Quadcopter Frame Kit  * 1 setDragonfly Hurricane 2207 KV2500 Brushless Motor * 4 pcsRobotdog 35A 32Bit 2-4S BLHeli_32 ESC Dshot1200 * 4 pcsMATEK PDB XT60 with BEC * 1 pcOmnibus F4 V5 Flight Controller * 1 pcDYS 5040 4-Leaf Propeller CW+CCW 1 Pair * 4 pairsAccessories Bag * 1 setARF 2 Including:ZMR Eclipse 210mm Carbon Fiber Mini FPV Quadcopter Frame Kit * 1 set RunCam Swift 2 1/3 CCD IR Blocked Micro Camera * 1 pcRunCam RC25G FPV Lens 2.5mm * 1 pcDragonfly Hurricane 2207 KV2500 Brushless Motor * 4 pcsRobotdog 35A 32Bit 2-4S BLHeli_32 ESC Dshot1200 * 4 pcsMATEK PDB XT60 with BEC * 1pcOmnibus F4 V5 Flight Controller * 1 pcDragonfly 5.8G 48CH Stackable Video Transmitter * 1 pcDragonfly Transmitting Extension Cables * 1 pcDragonfly Booster 5.8G FPV Antenna 5cm SMA * 1 pcDYS 5040 4-Leaf Propeller CW+CCW 1 Pair * 4 pairsAccessories Bag * 1 setARF1 Including: ARF2 Including: 

    $149.99-$199.99

    SKU:ZMARF2

    Weight: 0.50 kg

  • ZMR Eclipse 210mm ARF for FPV Beginners

    Brief Setup Guide of ZMR EclipseZMR Eclipse is a new 210mm carbon fiber mini quadcopter that designed based on the hot selling ZMR-X210. We are always listenting to what our customers say and made some slight changes to make it a better racing frame. For your easy setup, also considering on different users might have different requirements on the setups, we have prepared three different ARF packages of ZMR Eclipse for different levels of users, including:ZMR Eclipse ARF for FPV BeginnersZMR Eclipse ARF for Intermediate UsersZMR EClipse ARF for Advanced UsersThese are the ARF packages of ZMR Eclipse for FPV beginners. We built these aiming to provide you a durable setup with an extremely low cost. It can satisfy your daily practice like freestyle flying. If you are new to FPV, these are definitely perfect choices for you. These ARF packges for FPV beginners come with the reputable Omnibus F4 flight controllers, RJX 2205 2300kv brushless motors and Cyclone BLHeli_S 20A ESCs. We have tested all the parts to make sure they are matching well to have a good performance. The included Omnibus F4 flight controller is not just for beginners, but it is also greatly used in some advanced settings for professional pilots. The omnibus series of flight controllers are known to be the best all in one integrated flight controller, using the best selection of sensors and parts at a great price and small form factor. It uses the MPU6000/ICM-20608 IMU over SPI for the super fast gyro updates (up to 32Khz) to keep up with the fast F4 MCU, allowing you to run your betaflight/iNav control loop insanely fast.  This gives you the extra edge when racing your FPV quadcopter.The Dragonfly 5.8g stackable VTX comes with 48 channels, 9-26v input and switchable between 25/200/600mw. The stackable design makes you easy to place this VTX above your flight controller. With 48 channels, no need to worry about the interference while powered on any more. We choose Cyclone BLHeli-s to use on the builds. BLHeli-S is still the most stable firmware. We have tested the ESCs, it is powerful enough to run with the included RJX 2205 2300KV motors.The ARF packages come with both 2 blades propellers and 3 blades propellers. The 2 blades props save more power than the 3 blades so that you can fly for a longer time, very suitable for FPV beginners. When you are good at flying, you can change to use the 3 blades propellers.The builds also comes with 700TVL 5-12V Micro FPV Camera to make you can enjoy the FPV racing. In general, these setups are specially made for FPV beginners with a good performance and low cost. They can be flied with full throttle and used for freestyle flying, very suitable for practice.ARF 1 Including:ZMR Eclipse 210mm Carbon Fiber Mini FPV Quadcopter Frame Kit  * 1 setRJX 2205 2300KV Brushless Motors * 4 pcsCYCLONE BLHELI-S 20A ESC * 4 pcsMATEK PDB XT60 with BEC * 1 pcOmnibus F4 V5 Flight Controller * 1 pcDragonFly 5030 Bulletproof Props White * 2 pairs5030 Inch Electric Propeller White * 2 pairsAccessories Bag * 1 setARF 2 Including:ZMR Eclipse 210mm Carbon Fiber Mini FPV Quadcopter Frame Kit * 1 700TVL 5-12V Micro FPV Camera * 1RJX 2205 2300KV Brushless Motors * 4 pcsCYCLONE BLHELI-S 20A ESC * 4 pcsMATEK PDB XT60 with BEC * 1pcOmnibus F4 V5 Flight Controller * 1 pcDragonfly 5.8G 48CH Stackable Video Transmitter * 1 pcDragonfly Transmitting Extension Cables * 1 pcDragonfly Booster 5.8G FPV Antenna 5cm SMA * 1 pcDragonFly 5030 Bulletproof Props White * 2 pairs5030 Inch Electric Propeller White * 2 pairsAccessories Bag * 1 setARF1 Including: ARF2 Including: 

    $110.99-$149.99

    SKU:ZMARF

    Weight: 0.50 kg

  • Feather SX-220 ARF

    Feather SX-220 FPV Racing QuadFeather SX-220 is a light and durable frame made of Japanese 3K carbon fiber. It features an easily removable camera housing mount that allows the user to access the interior of the frame to preform basic maintenance on electronic components. The side panel camera mounts for your FPV camera can be adjusted from 10-60 degrees to allow for a camera angle that can suit both beginner and experienced pilots. The camera protection housing also works double duty and can be used as a 30 degree mount for you HD action cameras. The interior arm nuts are pressed into the carbon fiber by using pressed nuts we’re able to achieve a simplistic design that looks nice and has a use. The screws for the arm placement can easily be removed and allow for very easy arm removal in the event that one might need to be changed. Feather SX-220 weighs in at 86.5 grams. This includes all bolts, nuts, standoffs and the sma glass fiber antenna mount. Such a light weight will help you shave off plenty of grams in your racing build. Feather SX-220 frame is also our first quad to be backed with a one year warranty against defects and broken parts. Please have a look at our 1 year replacement warranty that protects you from broken carbon fiber that may occur to your quad within it’s first year of use. The SX-220 ARF comes with the powerful Dragonfly Hurricane 2207 2500KV brushless motors which are specially designed for FPV racing. The reputable Omnibus F4 ensures you to fly with the best possible performance, while the Typhoon32 4in1 32bit BLHeli ESC gives you the incredible speed.Features:Made of Ultra High Quality Japanese 3K Carbon Fiber.Camera Angle can be Adjusted Between 10~60 Degree.FPV/Action Camera Mounts.30 Degree Mount for HD Action Cameras.Glass-fiber SMA mount.Turtle mode Compatible.Replaceable Arms for Easy Installing and Reparing.The frame is only 86.5g includes all bolts, nuts, standoffs and the SMA glass fiber antenna mount.Combo Included:1x Feather SX-220 FPV Racing Frame4x Dragonfly Hurricane 2207 KV2500 Brushless Motor1x Typhoon32 4in1 BLHeli_32 ESC 4x35A V1.21x Omnibus F4 V5 Flight ControllerWarranty ClaimsIn the event that breakage does occur, FPV Model is offering a a full coverage warranty on both Carbon Fiber and aluminum stand-offs. In order to process your claim, please send an email to sales@fpvmodel.com. In the email please include the following information: 1.) Your order number. 2.) Your Full Name3.) Pictures of the broken parts with arrows highlighting the problem. Please send pictures of the broken parts. The pictures should show the parts installed on the frame and include a paper note with your order number clearly visible in the photos. Please do not send pictures of parts you may have found on the internet. 

    $159.99

    SKU:SX220ARF

    Weight: 0.50 kg

  • X-Racer KL100 Micro Racing Quad ARF / BNF

    Note: The battery and Frsky XM Receiver that showed in above video are not included.Micro class FPV racing has been more and more popular around the world, you can enjoy the fun of FPV racing with those micro racers anywhere, anytime. Now here comes a new micro racing frame KL100.KL100 is a 2” propeller 100mm class micro frame. Only about 101 grams with a 2S 550mAh lipo battery, 5 grams lighter than the popular 90mm KL-EX90. The small size and light weight do not mean that the KL100 is lacking power. In fact, as per our internal tests, with just a 2S battery, it is powerful enough to give you a super fast respond. You can feel the power just like you are flying with a 5” racing quad.The KL100 BNF/ARF are equipped with the very accepted Gemfan 2035BN propellers and use the new EMAX F3 Magnum mini FPV tower system which incorporates Betaflight OSD, F3 FC and 3-4s 4in1 ESC. The same to KL-EX90, the Dragonfly MC1105 6000kv motors have been getting rave reviews and are also used on the build. We don’t stop there though. We are cooperating with Runcam, using the new Runcam Nano FPV camera and RunCam TX200 5.8G 48CH Video Transmitter on the build. The Runcam Nano is the smallest Runcam FPV camera so far yet it has a very fast exposure handling (see the review by Oscar Liang). It is a camera Runcam specially made for nano racing quads that has the same performance to reputable Runcam Swift / Swift Mini. The Runcam TX200 is super light in weight and easy to control. It has a better reception than the 25mw vtx. Features:1. 100mm micro class with 2” propellers. Do not need to get it registered with the FAA if you are from the United States.2. Small in size and light in weight, all up weight 66 grams only without battery and about 101 grams with a 2S 550mAh lipo.3. Powerful and super fast respond with 2s lipo. Capable of running with 3s by using 6000kv motors.4. Uses reputable EMAX F3 Magnum mini FPV tower system with built-in Betaflight OSD gives you an extremely good stability and flight performance.5. Equipped with powerful MC1105 brushless motors and Gemfan 2035BN propellers.6. Uses Runcam Nano FPV camera and Runcam TX200 vTX.Before Purchasing: We send the green version of 3D printed part in the ARF/ BNF combo if without special instructions. If you prefer another color (the 3D printing parts have color green and blue), please let us know by leaving message at the checkout page.The KL100 does not come with the receiver as some of you may use different transmitter. If you are using the Frsky transmitter, we suggest use FrSky XM 16 Ch Micro SBUS Receiver. If you are using other RC transmitters, you will use other mini transmitters accordingly.The camera in this combo is in PAL version. If you need the NTSC version, please leave message at checkout, thank you.Brief Tutorial of X-Racer KL100 Racing Quad

    $139.99-$149.99

    SKU:KL100ARF

    Weight: 0.40 kg

  • ZMR180 FPV Starter BNF Package

    ZMR 180 Carbon FPV Mini Quad - Full Review By BMSWebThe ZMR180 is a micro quad designed with "fun" in mind. Agile, quick, and small all fit together with this kit and its a blast to fly. Keeping simplicty in mind this frame has high quality 3mm bottom plate and a 1.5 mm top plate. Parts Included:1 x ZMR180 Frame4 x Dragonfly MC1806 2300KV Mini Motor 1 x X-Racer F4 Flight Controller4 x DYS XS 20A 3-4S ESC1 x RunCam Swift Mini 600TVL FPV Camera (Update on November 29th.)1 x Dragonfly 5.8G 48CH Vtx10 Pairs x DYS 4040 3-Leaf Propeller1 x MATEK PDB XT60 with BEC 5V/12V1 x Dragonfly Booster 5.8G 3dBi TX/RX FPV Antenna RP-SMA1 x XT60 power plug connector MaleNote: The frame have color Black and Red. We send by random. If you have the specified color, please leave a message at the check out page, thank you! Note: The battery that shown in the pictures is not included in the ARF combos.

    $199.99

    SKU:ZMR180PTM1

    Weight: 1.20 kg

  • X-Racer X9 Micro Racing Quad DIY Combo

    X-Racer X9 FPV flyBefore Purchasing:The X-Racer X9 does not come with the receiver. If you are using the Frsky transmitter, we suggest use FrSky XM 16 Ch Micro SBUS Receiver. If you are using other RC transmitters, you will use other mini transmitters accordingly.The camera in the combos is in PAL version. If you need the NTSC version, please leave message at the checkout, thank you.The DIY version contains the parts that you need to build, but they are not assembled yet. Please note that you will still need to purchase the battery, radio control and transmitter if you do not have them.The DIY combo  does not have the protection cover. If you need the cover pls paid 3 USD via Special Service.Following the X-Racer KL-EX90, FPV Model now has another 2" propeller 90 class micro racer. The ultralight micro racer comes with Runcam Micro Swift CCD camera which is the smallest FPV camera that use 1/3" CCD sensor in FPV community. No more blurry and dull image like youll have on other micro class. You will get the same good quality video on this micro racer like you did with normal Runcam Swift.Micro class FPV racing is more and more popular. Comparing to the regular 5" racing quads, these little stuff have many advantages. You can fly or race with them at anytime any where you like. Because they are so light in weight and so small in size, you do not need to register with FAA if you are from the United States to fly them.Equipped with the mini Raceflight Millivolt flight controller and Raceflight Spark 4n1 ESC, you will gain the best performance that you never had before. The Millivolt presents not only the BEST performance, but also the most STABLE performance due to the amazing vibration rejection technology implemented in RaceFlight. In addition to these, the X9 is equipped with the powerful Dragonfly MC1105 7500KV motors which has been proven very powerful with X-Racer KL-EX90. Features:Small in size and light in weight. All-up-weight is 83 grams only without battery. Do not require the hassles of getting it registered with the FAA if you are from the United States.2s / 3s lipo. Excellent power with just a 2S battery, even more powerful with 3S. It gives you very high speed, very precise and rail-like handling.Fast as other 5" 4S racing quads. Use Runcam Micro Swift, the worlds smallest and lightest CCD professional camera. It has the same performance to reputable Runcam Swift and Swift Mini.Equipped with the mini Raceflight Millivolt flight controller and Raceflight Spark 4n1 ESC. The Millivolt presents not only the BEST performance, but also the most STABLE performance due to the amazing vibration rejection technology implemented in RaceFlight. .Equipped with powerful and reliable micro Dragonfly MC1105 7500kv brushless motors. Gemfan 2035BN 4-blade propellers are almost unbreakable, extremely smooth and guaranteed to exceed your expectations.A Dragonfly 25mw 48ch Vtx with protective coating is inlcuded to give an even more aero dynamic low profile design for the video transmission. Parts Included:1 x X-Racer X9 Frame4 x Dragonfly MC1105 7500kv Motor1 x Raceflight Millivolt Flight Controller1 x Raceflight Spark 4n1 ESC1 x RunCam Micro Swift 2 FPV Camera (Update on September 12th.)1 x Dranonfly 5.8g 25MW 48CH Vtx4 Pairs x GemFan 2035BN 4-Blade Propellers1 x 16AWG Silicon Wire1 x Amass XT30 Plug Male16 x M2*4 Screws16 x M2*6 Screws10 x M2*7 Screws4 x M3*18 Screws7 x M2*19 Aluminum Standoff10 x M3 Black Nylon NutX-Racer X9 Brief Installation Manual: PDF DownloadFriendly reminder: The DIY version contains the parts that you need to build, but they are not assembled yet. The battery and transmitter that shown on the pictures are not included. 

    $228.00 $169.99, Save $58.01 OFF

    SKU:X9ARF

    Weight: 0.30 kg

  • X-Racer X9 Micro Racing Quad BNF

    X-Racer X9 FPV flyBefore Purchasing:It takes about 1 to 3 days for us to build and test the BNF version. If you are experienced in building, it would be better purchase the DIY version to build by yourself to save the time.The X-Racer X9 does not come with the receiver. If you are using the Frsky transmitter, we suggest use FrSky XM 16 Ch Micro SBUS Receiver. If you are using other RC transmitters, you will use other mini transmitters accordingly.The camera in the combos is in PAL version. If you need the NTSC version, please leave message at the checkout, thank you.Following the X-Racer KL-EX90, FPV Model now has another 2" propeller 90 class micro racer. The ultralight micro racer comes with Runcam Micro Swift CCD camera which is the smallest FPV camera that use 1/3" CCD sensor in FPV community. No more blurry and dull image like youll have on other micro class. You will get the same good quality video on this micro racer like you did with normal Runcam Swift.Micro class FPV racing is more and more popular. Comparing to the regular 5" racing quads, these little stuff have many advantages. You can fly or race with them at anytime any where you like. Because they are so light in weight and so small in size, you do not need to register with FAA if you are from the United States to fly them.Equipped with the mini Raceflight Millivolt flight controller and Raceflight Spark 4n1 ESC, you will gain the best performance that you never had before. The Millivolt presents not only the BEST performance, but also the most STABLE performance due to the amazing vibration rejection technology implemented in RaceFlight. In addtion to these, the X9 is equipped with the powerful Dragonfly MC1105 7500KV motors which has been proven very powerful with X-Racer KL-EX90. Features:Small in size and light in weight. All-up-weight is 83 grams only without battery. Do not require the hassles of getting it registered with the FAA if you are from the United States.2s / 3s lipo. Excellent power with just a 2S battery, even more powerful with 3S. It gives you very high speed, very precise and rail-like handling.Fast as other 5" 4S racing quads. Use Runcam Micro Swift, the worlds smallest and lightest CCD professional camera. It has the same performance to reputable Runcam Swift and Swift Mini.Equipped with the mini Raceflight Millivolt flight controller and Raceflight Spark 4n1 ESC. The Millivolt presents not only the BEST performance, but also the most STABLE performance due to the amazing vibration rejection technology implemented in RaceFlight. .Equipped with powerful and reliable micro Dragonfly MC1105 7500kv brushless motors. Gemfan 2035BN 4-blade propellers are almost unbreakable, extremely smooth and guaranteed to exceed your expectations.A Dragonfly 25mw 48ch Vtx with protective coating is inlcuded to give an even more aero dynamic low profile design for the video transmission. Parts Included:1 x X-Racer X9 Frame4 x Dragonfly MC1105 7500kv Motor1 x Raceflight Millivolt Flight Controller1 x Raceflight Spark 4n1 ESC1 x RunCam Micro Swift 2 FPV Camera (Update on September 12th.)1 x Dranonfly 5.8g 25MW 48CH Vtx4 Pairs x GemFan 2035BN 4-Blade Propellers1 x 16AWG Silicon Wire1 x Amass XT30 Plug Male16 x M2*4 Screws16 x M2*6 Screws10 x M2*7 Screws4 x M3*18 Screws7 x M2*19 Aluminum Standoff10 x M3 Black Nylon NutX-Racer X9 Brief Installation Manual: PDF Download

    $242.99 $199.99, Save $43.00 OFF

    SKU:X9BNF1

    Weight: 0.30 kg

  • X-Racer KL-EX90 Micro Racing Quad DIY Combo

    KL-EX90 Indoor FPVX-Racer KL-EX90 LOS Maiden Flight By the RCAddictBefore Purchasing:The KL-EX90 does not come with the receiver. If you are using the Frsky transmitter, we suggest use FrSky XM 16 Ch Micro SBUS Receiver. If you are using other RC transmitters, you will use other mini transmitters accordingly.The camera in this DIY package is in PAL version. If you need the NTSC version, please leave message at checkout, thank you.The motors included in this DIY package are Dragonfly MC1105 6000KV Motor by default. If you need the 7500KV version, please leave a message when you place the order.We send the white version of 3D printed part in DIY combo if without special instructions. If you prefer another color, please let us know by leaving message at the checkout. The STL file of 3D camera mount printed parts can be download HERE.This is the KL-EX90 and it is a 2" propeller 90mm class frame. Just because the size is small does not mean that it is lacking power. This tiny beast is capable of running on 3s motors and most recently it was used in Shanghai to race against some of the top pilots in the world all while they were using 250mm sized quads.  It also has been a proven winner of micro class at race track while our team pilot Kakei Leung  got the 1st place at Hongkong Mini Class Drone Race.This frame is equipped with the very well accepted Gemfan BN2035 propellers and uses the flycolor S-Tower which incorporates betaflight OSD, F3 flight controller, and 4 in one ESCs. The Dragonfly MC1105 6000kv motors have been getting rave reviews and are also used on this frame. We dont stop there though, with this build you can say goodbye to those nasty little 2 dollar board cameras . Weve made this one standard to use the Run Cam micro swift which is much more expensive than the cheap cameras but the picture quality is well worth the extra details. Coming in two options, either BNF combo or a build it yourself DIY package. If you prefer a BNF, please click here!Features:Small in size and light in weight. All-up-weight is 106 grams only with a 2S 550mAh lipo battery. Do not require the hassles of getting it registered with the FAA if you are from the United States.2s / 3s. Excellent power with just a 2S battery. It gives you very high speed, very precise and rail-like handling.Use Runcam Micro Swift, the worlds smallest and lightest CCD professional camera. It has the same performance to reputable Runcam Swift and Swift Mini.The reputable Flycolor RAPTOR S-Tower of F3 FC and 4-in-1 BLHeli_S 2-3S ESC gives you extremely good stability and flight performance.Equipped with powerful micro Dragonfly MC1105 brushless motors. Works great with Gemfan BN2035 propellers and Flycolor RAPTOR S-Tower.A Dragonfly 25mw 48ch Vtx is inlcuded to give an even more aero dynamic low profile design for the video transmission. The flight controller is with built-in OSD.The design is inspired by the champion KL200Race racing drone. Much smaller in size, but gives you the same flying experience of professional 200 and 210 class racing drones.Recommend 2S PID Setting:ROLL   P 48 I 50 D 29PITCH  P 53 I 55 D 27YAW    P 67 I 58 D  TPA 0.12Recommend 3S PID Setting:ROLL   P 24 I 48 D 18PITCH  P 35 I 50 D 23YAW    P 70 I 48 D  TPA 0.2Wiring Diagram for Flycolor S-Tower:Package including:1 x KL-EX90 Frame4 x Dragonfly MC1105 6000KV Micro Class Racing Motor1 x Flycolor RAPTOR S-Tower1 x RunCam Micro Swift FPV Camera1 x Dranonfly5.8g25MW 48CH8pairs x GemFan 2035BN 4-Blade Propellers1 x Orignal Amass XT30 Plug Male1 x CJMCU WS2812 5050 RGB LED Board1 x 3D Prints Camera Mount1 x 3D Prints Taillight Mount20 x M2*4 Screws12 x M2*6 Screws8 x Motor ScrewsX-RACER KL-EX90 Installation Instructions, Click Here.The KL-EX90 is a 2" propeller 90 class airframe built for micro class FPV racing. All-up-weight is just about 106 grams with a 2S 550mAh lipo. Because it is so small in size and so light in weight that under 250g, you do not need to register with FAA if you are from the United States to fly the KL-EX90.Four colors available for the 3D printed parts to show your personality and stand out from the crowd. We will send the white version if without instruction. If you prefer another color, please let us know.Compact design, suitable for both indoor and outdoor FPV. Equipped with F3 Flight Controller, 4-in-1 ESC,  powerful 1105-6000kv motors, Runcam Micro Swift FPV camera, Dragonfly 25mw 48ch vTX and LED light, all these have made the KL-EX90 perfect for both LOS and FPV flyers. A Dragonfly 25mw 48ch Vtx is inlcuded to give an even more aero dynamic low profile design for the video transmission. The 48CH allows several flyers to race at the same time without worry about the signal interference during racing. The VTX is not directly put on the top plate, but into the hollow part of top plate for a better protection.The KL-EX90 uses reputable Flycolor RAPTOR S-Tower of F3 FC and 4-in-1 BLHeli_S 2-3S ESC gives you extremely good stability and flight performance.Use Runcam Micro Swift, the worlds smallest and lightest CCD professional camera. It has the same performance to the well-known Runcam Swift and Swift Mini.Equipped with powerful micro Dragonfly MC1105 6000kv brushless motors. Works great with Gemfan 2035BN propellers and Flycolor RAPTOR S-Tower. The Gemfan 2035BN propellers are extremely durable and smooth. Here we include three more sets in the BNF, so you will never need to worry about the damage to the props.The design of KL-EX90 is inspired by the champion KL200Race racing quad. Much smaller in size, but gives you the same flying experience of professional 200 and 210 class racing drones.

    $174.99 $153.99, Save 12% OFF 1

    SKU:KL90ARF

    Weight: 0.30 kg

  • X-Racer KL-EX90 Micro Racing Quad BNF

    KL-EX90 Indoor FPVX-Racer KL-EX90 LOS Maiden Flight By the RCAddictBefore Purchasing:The KL-EX90 does not come with the receiver. If you are using the Frsky transmitter, we suggest use FrSky XM 16 Ch Micro SBUS Receiver. If you are using other RC transmitters, you will use other mini transmitters accordingly.The motors included in this combo are Dragonfly MC1105 6000KV Motor by default. If you need the 7500KV version, please leave a message when you place the order.The camera in the BNF combos is in PAL version. If you need the NTSC version, please leave message at the checkout, thank you.The 3D printed part in the BNF combos is white if without special instructions. If you prefer another color, please let us know by leaving message at the checkout. The STL file of 3D camera mount printed parts can be download HERE.It takes about 3 to 5 days for us to build and test the BNF version. If you are experienced in building, it would be better purchase the DIY version to build by yourself to save the time.This is the KL-EX90 and it is a 2" propeller 90mm class frame. Just because the size is small does not mean that it is lacking power. This tiny beast is capable of running on 3s motors and most recently it was used in Shanghai to race against some of the top pilots in the world all while they were using 250mm sized quads.  It also has been a proven winner of micro class at race track while our team pilot Kakei Leung  got the 1st place at Hongkong Mini Class Drone Race.This frame is equipped with the very well accepted Gemfan BN2035 propellers and uses the flycolor S-Tower which incorporates betaflight OSD, F3 flight controller, and 4 in one ESCs. The Dragonfly MC1105 6000kv motors have been getting rave reviews and are also used on this frame. We dont stop there though, with this build you can say goodbye to those nasty little 2 dollar board cameras . Weve made this one standard to use the Run Cam micro swift which is much more expensive than the cheap cameras but the picture quality is well worth the extra details. Coming in two options, either BNF combo or a build it yourself DIY package. If you prefer a DIY, click here. Features:Small in size and light in weight. All-up-weight is 106 grams only with a 2S 550mAh lipo battery. Do not require the hassles of getting it registered with the FAA if you are from the United States.2s / 3s lipo. Excellent power with just a 2S battery, even more powerful with 3S. It gives you very high speed, very precise and rail-like handling.Fast as other larger racing quads. Our team pilot Ka Kei Leung finished the drone race at WMC 2017 in 9.65 sec. Click to watch the video.Use Runcam Micro Swift, the worlds smallest and lightest CCD professional camera. It has the same performance to reputable Runcam Swift and Swift Mini.The reputable Flycolor RAPTOR S-Tower of F3 FC and 4-in-1 BLHeli_S 2-3S ESC gives you extremely good stability and flight performance.Equipped with powerful micro Dragonfly MC1105 brushless motors. Works great with Gemfan BN2035 propellers and Flycolor RAPTOR S-Tower.A Dragonfly 25mw 48ch Vtx with protective coating is inlcuded to give an even more aero dynamic low profile design for the video transmission. The flight controller is with built-in OSD.The design is inspired by the champion KL200Race racing drone. Much smaller in size, but gives you the same flying experience of professional 200 and 210 class racing drones.Recommend 2S PID Setting:ROLL   P 48 I 50 D 29PITCH  P 53 I 55 D 27YAW    P 67 I 58 D  TPA 0.12Recommend 3S PID Setting:ROLL   P 24 I 48 D 18PITCH  P 35 I 50 D 23YAW    P 70 I 48 D  TPA 0.2Wiring Diagram for Flycolor S-Tower:Package including:1 x KL-EX90 Frame4 x Dragonfly MC1105 6000kv Micro Class Racing Motor1 x Flycolor RAPTOR S-Tower1 x RunCam Micro Swift FPV Camera1 x Dranonfly5.8g25MW 48CH8pairs x GemFan 2035BN 4-Blade Propellers1 x Orignal Amass XT30 Plug Male1 x CJMCU WS2812 5050 RGB LED Board1 x 3D Prints Camera Mount1 x 3D Prints Taillight Mount20 x M2*4 Screws12 x M2*6 Screws8 x Motor ScrewsX-RACER KL-EX90 Installation Instructions, Click Here.The KL-EX90 is a 2" propeller 90 class airframe built for micro class FPV racing. All-up-weight is just about 106 grams with a 2S 550mAh lipo. Because it is so small in size and so light in weight that under 250g, you do not need to register with FAA if you are from the United States to fly the KL-EX90.Four colors available for the 3D printed parts to show your personality and stand out from the crowd. We will send the white version if without instruction. If you prefer another color, please let us know.Compact design, suitable for both indoor and outdoor FPV. Equipped with F3 Flight Controller, 4-in-1 ESC,  powerful 1105-6000kv motors, Runcam Micro Swift FPV camera, Dragonfly 25mw 48ch vTX and LED light, all these have made the KL-EX90 perfect for both LOS and FPV flyers. A Dragonfly 25mw 48ch Vtx is inlcuded to give an even more aero dynamic low profile design for the video transmission. The 48CH allows several flyers to race at the same time without worry about the signal interference during racing. The VTX is not directly put on the top plate, but into the hollow part of top plate for a better protection. It comes with protective coating to prevent from moisture ingress, while still easy for the users to shift the channels and less heat.The KL-EX90 uses reputable Flycolor RAPTOR S-Tower of F3 FC and 4-in-1 BLHeli_S 2-3S ESC gives you extremely good stability and flight performance.Use Runcam Micro Swift, the worlds smallest and lightest CCD professional camera. It has the same performance to the well-known Runcam Swift and Swift Mini.Equipped with powerful micro Dragonfly MC1105 6000kv brushless motors. Works great with Gemfan 2035BN propellers and Flycolor RAPTOR S-Tower. The Gemfan 2035BN propellers are extremely durable and smooth. Here we include three more sets in the BNF, so you will never need to worry about the damage to the props.For the users who are new to FPV, we have an option of with prop protection cover. It will greatly reduce the damage to KL-EX90 in case there is a hard crash.The design of KL-EX90 is inspired by the champion KL200Race racing quad. Much smaller in size, but gives you the same flying experience of professional 200 and 210 class racing drones.

    $189.99 $167.19, Save 12% OFF 3

    SKU:KL90BC

    Weight: 0.30 kg

  • X-Racer X-1 V2 DIY Combo

    X-Racer X-1 V2 Build & BindingBefore Purchasing: Due to the air regulation, the batteries can only be shipped to following countries by E-packet:Canada, Australia, France, Germany, United Kingdom and United States. By Registered Airmail Shipping: Japan, Brazil and Russia.  If you are from other countries, please choose DHL for shipping. Thank you.Agile, safe and fun. The X-Racer X-1 V2 is an ultra-micro FPV drone designed for indoor flying in even the smallest of places. It is an amazing gift to both the first time pilot and advanced pilots.  We have two combos for you: One is the FPV Ready Bind-n-Fly version without transmitter, the other is the DIY combo with all the BNF parts included.  No soldering or 3D printing required for both of the two combos!  If you like Do it Yourself,  choose this DIY combo, the assembly is simple and quick. Or if you prefer a  BNF Combo, please click here!Main Features:1. Pre-flashed with the latest Betaflight firmware. 2. Micro 5.8g 48ch Vtx. 3. FC is compatible with FrSky & SBUS, USB port ready.4. Micro FPV HD Camera.5. The cover is available in various colors. (Blue, Gray, Yellow, Rose, optional )6. The BNF version is completely assembled that just need to bind with the Taranis then fly.7. No soldering or 3D printing required.Package Included in DIY Combo:X-Racer X-1 V2 Frame x 1X-Racer X-1V2  Cover x 1 (Blue, Grey, Yellow, Rose, optional)Set of Flight Controller, Camera, TX and Antenna x 1 (Pre-soldered, Camera in PAL format)X-Racer HV 1S 250mah 3.8v 60C Hight Voltage Battery x 1 Dragonfly 7x16mm 14000KV Coreless Motor for X-Racer x 4 (2cw + 2ccw)X-Racer 31mm 4 Blade Clear Propellers x 8 (4cw + 4ccw)X-Racer X-1 USB charger x 1You might also like: HobbyTiger BC-1S06 Lipo 6 Port Battery Charger or 4 Ports 1S Lipo Charger With XT60 Plug

    $68.99

    SKU:X1FC2

    Weight: 0.35 kg

  • X-Racer X-1 V2 BNF with Two Batteries

    X-Racer X-1 Review by the RCAddictNote: Due to the air regulation, the batteries can only be shipped to following countries by E-packet:Canada, Australia, France, Germany, United Kingdom and United States. By Registered Airmail Shipping: Japan, Brazil and Russia.  If you are from other countries or areas, please help to choose DHL for shipping.Note: The BNF needs 1 to 3 days to test and assembly.The X-Racer X-1 micro racer is making a return with an all new with the F3 brushed flight controller. We are always listening to what our customers say and we have made some improvements accordingly. Now the new X-Racer X-1 F3 Fight Controller V2 comes with Frsky Rx and OSD Integrated.Agile, safe and fun. The X-Racer X-1 is an ultra-micro FPV drone designed for indoor flying in even the smallest of places. It is an amazing gift to both the first time pilot and advanced pilots.  We understand that some of you just want to fly and enjoy the race. So you can also just choose the BNF version and leave all the assembly & testing job to us. The BNF version is a fully assembled kit and it is fully tested before shipping. All firmwares are loaded and customers just need to bind with their Frsky transmitter and enjoy the flight.Main Features:1. Pre-flashed with the latest Betaflight firmware. 2. Micro 5.8g 48ch Vtx. 3. FC is compatible with FrSky & SBUS, USB port ready.4. Micro FPV HD Camera.5. The case is available in various colors. (Blue, Gray, Yellow, Rose, optional )6. The BNF version is completely assembled that just need to bind with the Taranis then fly.7. No soldering or 3D printing required.Package Included in BNF Combo :X-Racer X-1 V2 Frame x 1X-Racer X-1 V2 Cover x 1 (Blue, Grey, Yellow, Rose, optional)Set of Flight Controller, Camera, TX and Antenna x 1 (Pre-soldered, Camera in PAL format)X-Racer HV 1S 250mah 3.8v 60C Hight Voltage Battery x 2 Dragonfly 7x16mm 14000KV Coreless Motor for X-Racer x 4 (2cw + 2ccw)X-Racer 31mm 4 Blade Clear Propellers x 8 (4cw + 4ccw)X-Racer X-1 USB charger x 1You might also like: HobbyTiger BC-1S06 Lipo 6 Port Battery Charger or 4 Ports 1S Lipo Charger With XT60 Plug

    $79.99 3

    SKU:X1FC

    Weight: 0.40 kg

  • ZMR210R 210mm Racing Quadcopter ARF Combo

    ZMR210R PID Tuning Tutorial by the RCADDICTThe ZMR210R is built for high performance FPV drone racing. We have listened to many experienced pilots and changed the bottom plate to one piece for exceptional strengh improvement. The ZMR210R is an evolution of the ZMR design, in keeping up with the changing times this ZMR was re-worked from the ground up. We are not just modifying the arms to give a "X" type of layout, we have re-worked it entirely to provide what the modern user wants. The ZMR210R is an airframe designed with strength in mind. This bare bones racers is a simple X style unibody design with a small footprint. Keeping strength in mind we have left out the cut outs that usually add weight reduction and an estetic appeal and decided wed make up the weight reduction by focusing on a smaller frame while leaving enough area to still comfortably install all the components for the build. This frame features routed edges that gives a smooth rounded surface to all edges of the carbon fiber which helps eliminate delaminated edging for those unavoidable strikes that everyone experiences....making this a perfet choice for those that are looking for a simple, durable, and lite frame.The pilot Seth of The RCAddict has designed a new camera mount that bolts on to the ZMR210R frame to fit the GoPro Session. Check the Thingiverse page if you need one!!Want to know more about ZMR210R? Join the discussion at the ZMR210R & ZMR-X210 Owners Facebook Group! Before Ordering:1. The 5045 propellers that included in these ARF packages are sent by random. If you have special requirement for the colors, please leave message at the check out page, thank you. 2. The camera in the ARF combos is in PAL version. If you need the NTSC version, please leave message at the check out page, thank you.3. The camera in the ARF combos is Runcam Swift 600TVL FPV Camera. If you want to change to FOXEER ARROW V2 HS1190 camera, please leave message at the check out page, thank you.4. The DYS XS30A ESC have been changed to DYS XSD 30A 3-6S ESC.Update History:1. Update on January 13th,2017: Due to the Dragonfly 5.8G 40CH Mini TX 200mw was out of stock, now the TX have been updated to Aomway TX001 for free.2. Update on January 16th,2017: The ARF 2 & 4 ESC have been change to LittleBee Spring 30A ESC Blheli-S Dshot3. Update on February 6th,2017: Due to the  Aomway TX001 was out of stock, now the TX have been updated to Dragonfly 5.8G 48CH 25/200/600mw VTX .4. Update on March 13th,2017: Due to the X-RACER F303 Flight Controller V3.1 was out of stock, now the FC have been updated to BetaflightF3 Flight Controller .PackageParts IncludedQuantityRemarks ZMR210R 210mm Racing Quadcopter Frame Kit 1 set  Emax RS2205S 2300KV Motor4 pcs  DYS XSD 30A 3-6S ESC4 pcs ARF-1DYS 5045 3-Leaf Propeller CW+CCW 1 Pair4 pairs  BetaflightF3 Flight Controller1 pc  Runcam Swift 600TVL FPV Camera 1 pc  Dragonfly 5.8G 48CH 25/200/600mw VTX1 pc  Plastic Molded Mount for GoPro Session & Hero1 pcs  Dragonfly Booster 5.8G 5cm SMA Antenna 1 pc   and 3M double sided adhesive tapesilicon, velcro strap,   wires, straps, shrink tubes, XT60 plug etc     ZMR210R 210mm Racing Quadcopter Frame Kit 1 set     Emax RS2205S 2300KV Motor 4 pcs     LittleBee Spring 30A ESC Blheli-S Dshot 4 pcs   ARF-2 DYS 5045 3-Leaf Propeller CW+CCW 1 Pair 4 pairs     BetaflightF3 Flight Controller 1 pc     Dragonfly 5.8G 48CH 25/200/600mw VTX  1 pc     Runcam Swift 600TVL FPV Camera 1 pc    Dragonfly Booster 5.8G 5cm SMA Antenna 1 pc     and 3M double sided adhesive, Velcro strap, tapesilicon,wires, straps, shrink tubes, XT60 plug etc    ZMR210R 210mm Racing Quadcopter Frame Kit1 set  DYS SE2205 PRO 2300KV Motor4 pcs  LittleBee Spring 30A ESC Blheli-S Dshot4 pcs ARF-3DYS 5045 3-Leaf Propeller CW+CCW 1 Pair4 pairs (with DYS SE2205 motor)BetaflightF3 Flight Controller1 pc  Runcam Swift 600TVL FPV Camera 1 pc  Dragonfly 5.8G 48CH 25/200/600mw VTX1 pc  Plastic Molded Mount for GoPro Session & Hero 1 pcs  Dragonfly Booster 5.8G 5cm SMA Antenna 1 pc   and 3M double sided adhesive tapesilicon, velcro strap,    wires, straps, shrink tubes, XT60 plug etc     ZMR210R 210mm Racing Quadcopter Frame Kit 1 set     DYS SE2205 PRO 2300KV Motor 4 pcs     DYS XSD 30A 3-6S ESC 4 pcs   ARF-4 DYS 5045 3-Leaf Propeller CW+CCW 1 Pair 4 pairs   (with DYS SE2205 Motor ) BetaflightF3 Flight Controller 1 pc     Runcam Swift 600TVL FPV Camera 1 pc     Dragonfly 5.8G 48CH 25/200/600mw VTX 1 pc   Plastic Molded Mount for GoPro Session & Hero    1 pcs     Dragonfly Booster 5.8G 5cm SMA Antenna 1 pc      and 3M double sided adhesive tapesilicon, velcro strap,       wires, straps, shrink tubes, XT60 plug etc     * The battery and LED strips that shown in the pictures are not included in the ARF combos.

    $278.99 $265.04, Save 5% OFF

    SKU:ZMR210RARF

    Weight: 1.20 kg

Find us on Google+ Watch us on Youtube Like us on Twitter Follow us on Facebook

Home   |   About Us   |   New Products   |   Multi-Rotors   |   FPV Airplanes   |   FPV Equipment   |   Battery / Chargers   |   Tools & Accessories   |   Contact Us   |   Blog   |  Site Map

Product Tags: ABCDEFGHIJKLMNOPQRSTUVWXYZ0-9

Copyright © 2015 FPVMODEL.COM®. All Rights Reserved.