Mini-Quad HQ Top 10

Sorted:
  • RunCam Split Camera With WiFi Module

    Test on Runcam Split by Oscar Liang* Friendly Reminder: To ensure the best performance, please power the camera with a stable input. It would be better power the camera with the 5V out from PDB. Runcam is known for keeping up with trends and making some of the best FPV cams on the market and this time theres no surpise that theyve done it again, except this time, its split! This is one idea that has been tackled by other companies before but none have gotten such great frame rates or clear footage. The split is just what its name sugguests and splits the camera from the main dvr processor that is built into most other cameras. This lets you use the camera for an fpv camera but also allows for an HD recorder capable of recording video at 1080p/60fps! The Runcam Split puts the camera where your typical fpv camera would go but puts the HD recorder on a stackable PCB style board that can fits directly over your flight controller, allowing for central placement of cg.FeaturesCan be used for FPV flying while recording 1080p60fps and totally replace your FPV camera.Latency is as low as the RunCam EagleConnect the Split directly to a VTX so it works just like a FPV camera.PCB board can be stacked on top of the ?FC/PDB, allowing for protection inside your airframeNo more HD camera mounting on top of the frame needed! Saves you 70g, COG is also more centralized.Included WiFi module for wireless settings control via phone app.Specifications:Downloads:User Manual (English)User Manual (Deutsch)User Manual (Chinese)Instruction diagramModule connection diagramReplaceable LensUnit of length: mm

    $75.70 $49.96, Save 34% OFF

    SKU:SPLIT-OR

    Weight: 0.12 kg

  • Set of Flight Controller, Camera, TX and Antenna for X-Racer X-1

    This is the accessories kits for X-Racer X-1 and DIY purpose.  Including Flight Controller, Camera, TX and Antenna. These parts have been soldered and tested before shipping.Features:1. Pre-flashed with the latest Betaflight firmware. 2. Micro 5.8g 48ch Vtx. 3. FC is compatible with FrSky & SBUS, USB port ready.4. Micro FPV HD Camera.

    $56.99

    SKU:X1FC1

    Weight: 0.25 kg

  • FrSky M-9 Hall Sensor Gimbal For Taranis X9D & X9D Plus

    Upgrade your Taranis X9D with this plug-n-play high resolution M9 Gimbal from FrSky. The highly sensitive Hall sensors will not wear out quickly. It has an extremely smooth feel with the quad ball-bearings and the metal outer construction. Thicker 4mm stick ends give you a solid link to your controls. Fully adjustable tension and easily disable the self centering axis with one screw. This is a must have accessory for achieving those precision flight maneuvers. Spcification:Brand Name: FrskyModel: M9-GimbalItem Name: M9-Gimbal M9 Sensitivity Sensor GimbalSupply Voltage (VCC): DC 3.0 ~ ±0.5V Sensitivity: 2.50 mV/G Linear Output Voltage Range: 0.1 ~ (VCC +0.1) V Quiescent Output (TA = 25°C, B = 0 G): 0.5 × VCC Noise (no load): ≤40mVppFeatures: -Hall sensor-4 ball-bearings-Adjustable tension-Can be enable or disable self centering on both axis and ratcheting on the Y axis-Special material quality that wears well

    $24.99 $21.99, Save 12% OFF

    SKU:FSM9G

    Weight: 0.15 kg

  • Rlink V2 433MHz 16CH Long Range UHF TX and 8CH SBUS RX Combo

    Rlink V2 433MHz 16CH Long Range UHF TX and 8CH SBUS RX ComboFeatures:High sensitivity, up to -115dbm16Bit ID, RAFHSS algorithmSupport almost all 2-18CH transmitter only if there is coach portPower two mode switchable: 400mW/800mW, Built-in buzzer, suggest use high power mode only under out of control situatioSupport sending port one button setting protectionSupport head tracker, plug and playIndependant 2-way PPM input, support 2 transmitter input synchroSupport 1 to more, or more to oneFrequency 410M-510MHz adjustableTransmitter/receiver built-in Micro USB portTransmitter EXT port used for expansion function, built-in support Futaba Sbus and Spektrum/JR satellite port protocol, support external rock control, 2-way communication, external BLT connectionTested transmitter included: Futaba, Spektrum/JR,Turnigy/Flysky/Imax 9X2, Frsky Tarinis, WLFY, Walkera, etc.SpecificationsTransmitter:Work frequency: UHFDimension: 73*65*15mmWeight: 64gWorking voltage: 7-16vCurrent: 180mA@12V low power mode; 360mA@12V, high power modeReceiver:8CH Standard channel, can be extended to 16chDimension: 45*30*6mmWeight: 16gWork voltage: 4-6VWork current: 75mA@5VPackage Included:1* Rlink V2 433Mhz 16CH UHF Transmitter1* TX antenna1* MFDlink / RLink Receiver2* Receiver antenna (Available in white and black , we will send them to you at random.)2* Data cableNote: you can buy together with Futaba adapter cable to realize plug and play. Caution: Make sure the wires are correctly connected, or it will cause damage.

    $169.00 $148.72, Save 12% OFF

    SKU:RLSBV2

    Weight: 0.20 kg

  • FPV 5.8g 200mw FPV System Set FS-3 for Mini Multirotor

    This is a simple Transmission set with reliable and quality parts.Plug and play,cables are pre-made with matching connector, so no soldering or guesswork is required. You can use it with the monitor or 5.8g goggles as you please,also it very suitable for mounting on the mini multirotor.We tested everything to make sure every part performed well.You can click the related product pages for the details.Package inclued:Aomway mini 200mw TX  x 1Aomway 5.88 4-leaf clover antenna x 14140+811 camera x 1L style connector x 1pre-made cable and accessoriesWe also offer you the receiving set package,as picture showed below.It  includes a RC832  receiver and aomway clover antenna,with pre-made cables will be perfectly working with the transmission combo package.you can choose if you need it.Update History: 1. Update on August 8th,2016 : The Aomway mini 200mw TX has been changed to Dragonfly 5.8G 40CH Mini TX 200mw.

    $54.90 $52.70, Save 4% OFF

    SKU:FS-1

    Weight: 0.40 kg

  • Tarot 5.8G 600MW 32CH Video TX/RX TL300N for FPV

    Description:- Tarot independent developing TX RX package with 32 frequency point- 600mw 5.8G telemetry system has super mini size and light weight, specially suitable for mini multirotor and QAV quadcopter- 32 frequency points are compatible with normal frequency, providing 1 channel of video signal, 2 channels of audio signal distant transmission, and also providing 5V 1A power supply outputSpecs:- TX5832-600M audio video transmitter x 1- RX5832 AV receiver x 1- 7P color pin x 1- 3.5MM power supply cable x 1- 2.5MM AV cable x 1- Manual x 1TX Parameters:- Net weight: 8.3g (antenna not included)- Dimension: 21 x 33 x 7.5 mm- Working Frequency: 5645-5945MHz- Channel: 4 bands / 32 channel- Channel: 5-DIP switch- Output Power: 27.5 dbm (600mw)- Input Voltage: DC 7-26V (2-6S)- Output Voltage: 5V 1A- Antenna Adaptor: SMA 50Ω- Working Temperature: -10 ~ 60 degrees.- FM Frequency: FMRX parameters:- Weight: 10.9 G (without antenna)- Dimension: 28 x 46 x 40 mm- Working frequency: 5645-5945 MHZ- Channel: 4 bands / 32 channels- Channel choose: 5-DIP switch- Receiving Sensitivity: -85 dbm- Input Voltage: DC 7-26V (2-6S)- Antenna Adaptor: SMA 50Ω- Working Temperature: -10 ~ 60 degrees- FM/PLL Frequency: FM/PLL- AV output: 2.5mm 4 pins AV output- Power input: 3.5mm (exterior) 1.3 mm (interior) DCNote:- Install the antenna before connecting the power to avoid further damage.- Choose proper working frequency and tune the receiver to the same frequency. Please refer to the channel list.- Do not touch the surface of transmitter while operating. It is normal the surface is getting hot.- The input voltage range is between 7-26V (2-6S), do not overload the working voltage.- The output voltage is 5V1A. Please confirm the current and voltage of the camera

    $51.65 $50.10, Save 3% OFF

    SKU:TL300N

    Weight: 0.10 kg

  • PARTOM 5.8G 600MW 9CH Wireless audio&video AV Transmitter receiver TX/RX Set

    PARTOM 5.8G 600mW 9-ch A/V Transmitting/Receiving System- Channel number indication makes it easier to use.- A simple data transmitting channel is deployed, it can transmits Max 4800 TTL data. (* Audio transmitting and data transmitting can NOT be used at same time) Specifications:   PARTOM 5.8G 600mW A/V Transmitting/Receiving SystemTransmitter specs:Input voltage: DC 7-12VConsumption current: 400mAOutput power: 28dbM (600mW)Channel number: 9-ch ; CH1:5.72G CH2:5.74G CH3:5.76G CH4:5.78G CH5:5.80G CH6:5.82G CH7:5.84G CH8:5.86G CH9:5.88GDimension: 45.5 x 28.5 x 18mmWeight: 40gvideo format supported: NTSC/PALAntenna connection: SMA*Note: TX antenna must be installed properly before it is switched on, power on without install antenna, or a improper antenna was used may easily burn the TX, and such damage is not covered by warranty.Receiver Specs:Weight: 67gDimension: 72x43x11mmPower supply: 12VCurrent consumption: 200mAChannel number: 9

    $108.90 $100.19, Save 8% OFF

    SKU:P5G8600TXRX

    Weight: 0.40 kg

  • 1.2G 400MW Wireless Audio & Video AV Transmitter Receiver TX RX Set

    1.2G 400mW 12CH Wireless Audio & Video AV Transmitter Receiver TX RX SetSpecification:- Input Voltage:DC12V- Comsumption current:250mA- Working frequency:1.2G- TX:Channel:8 Channel- RX:12Chnnel- Output power:400mw- Transmission sistance:400m-800m(open area)- Weight:60gReceiver description:Working band: /0.9G/1.2G/1.3GChannel Selection: button to the digital displayReceiving Mode: Manual receiver / automatically receive optionalWeight:115gDimension:115*67*21mmWorking Voltage:DC12VWorking Current:260mAWorking Channels:12CHWorking frequencies:0.910G  0.980G 1.010G 1.040G1.080G 1.120G 1.160G 1.200G1.240G 1.280G 1.320G 1.360GNOTE:please install the antenna first before you power on and dont keep energizing with TX over 2 minutes on the ground,or it will cause overheating and burn the machine.we recommend you to get a heatsink to use with it.

    $59.90 $55.11, Save 8% OFF

    SKU:P1G2400TXRX

    Weight: 0.30 kg

  • FPV 5.8G 32CH Auto-scan A/V Receiver (RX) RC32S 32CH Edition

     THIS IS THE NEW 32-CHANNEL AUTO-SCAN EDITION 5.8G A/V WIRELESS RECEIVER.Special Features:Auto-scan by one touch, 32ch working channels, compatible with all popular 5.8G A/V transmitters available on market. FPV 5.8G 32CH Auto-scan A/V Receiver (RX) RC32S  - 32CH Edition Video format supported: NTSC/PALAntenna connection: SMA, jack (module side ) Power input: 12V (3S Lipo suggested)Video output ports number:  2Weight: 80gWorking frequencies: 5705  5685 5665  5645  5885 5905  5925  59455733  5752 5771  5790  5809 5828  5847  58665740  5760 5780  5800  5820 5840  5860  58805865  5845 5825  5805  5785 5765  5745  5725Includes:1 x receiver (RX)1 x antennas (2db)1 x power wireRequires:1 x transmitter (TX) 

    $45.89 $34.42, Save 25% OFF

    SKU:RC32S

    Weight: 0.20 kg




Find us on Google+ Watch us on Youtube Like us on Twitter Follow us on Facebook

Home   |   About Us   |   New Products   |   Multi-Rotors   |   FPV Airplanes   |   FPV Equipment   |   Battery / Chargers   |   Tools & Accessories   |   Contact Us   |   Blog   |  Site Map

Product Tags: ABCDEFGHIJKLMNOPQRSTUVWXYZ0-9

Copyright © 2015 FPVMODEL.COM®. All Rights Reserved.