• *Pre-order* BetaflightF3 Flight Controller

    Update on 02/22/2017: Taking pre-orders on BetaflightF3, orders placed before 02/21 will be shipped in early March, orders placed after 02/21 will be shipped in mid March. Thank you very much for your patience.Update on 03/08/2017: The estimated shipping date for orders placed after March 8th is March 31st, 2017. Thanks for your patience in advance.Update on 03/22/2017: The estimated shipping date for orders placed after March 22 nd is April 10th, 2017. The flight controller is far more complicated in manufacturing than expected, we are working hard to get your orders shipped asap. Thank you very much for your patience and always great support.BetaflightF3 is the flight controller designed to use every possible feature of Betaflight. More than the last half year has been spent in development. Boris B has worked with us to go over features and design aspects to help give us insight into what betaflight users want/need. This board features a 3A power draw giving users extra room for added attachments through uart ports. The six layer PCB is a more expensive design approach but was needed to give the ability to have a PDB that was capable of having wiring pads on both the top and bottom of the board. By using the six layer design we were able to increase the size of the pads and work around all the components all the while giving esc connections in the corners of the board rather than bunching all connections on either the top OR the bottom. Featuring a fully functioning OSD that can be configured in Betaflight this board will make configuring your OSD a breeze. The team at betaflight have been hard at work developing DSHOT and this board is also compatible with the latest release. But we didn’t stop there, this board also features a micro adapter to accept TF cards for those of you that like to follow up your flights with reviewing black box logging...we think we know of at least one guy that will like that. Friendly Reminder: Choosing your power supply for video is relatively simple. Betaflight FC has two options, 5v and battery voltage. Choose your camera voltage by jumping RAM with either the 5V solder section or the Vbat solder section. (its recommended to use Vbat, Most cameras and Video transmitters can run off battery voltage) If using 5v it is recommeded to only power your camera and get the power for Vtx from another source. 

    Review: Write a Review



    Weight: 0.10 kg

  • X-Racer Quadrant 25A 4~6S BLHeli_S ESC

    X-Racer Quadrant 25A BLHeli_s ESC, The Perfect ESC? By Joshua BardwellX-Racer Quadrant 25A ESC - Bench Build By HecTech FPVThe new X-Racer Quadrant ESC is powered by high performance EFM8BB21 MCU, and flashed with BLHeli_S program. It supports multishot/one shot42/oneshot125. With 25AMp constant RMS (30A max) and supports 4-6s (Works well on 3S also).The four tiny X-Racer Quadrant ESCs can be installed separately on the arms, but also can be installed together like a PCB under the flight controller. The X-Racer ESCs can be considered as 4-in-1 ESCs, but not the same to other 4-in-1 ESCs that only can be used on one PCB. One disadvantage of other 4-in-1 ESCs is, if one part of the ESC damaged, then the whole PCB have to be changed. It would be too much trouble to the pilots. But there will be no problem with X-Racer ESCs. The four tiny ESCs can be used together or seperately. Even one is damaged, you just need to change one, no need to change the whole PCB. (Although we dont believe the ESC would easily damaged.)Features of X-Racer Quadrant:1. Can be installed separately on the arms, or 4 ESCs installed together like a PCB under the flight controller.2. Powered by high performance EFM8BB21 MCU.3. Flashed with BLHeli_S program. It supports multishot/one shot42/oneshot125.4. Dshot150/Dshot300/Dshot600 Compatible.5. With 25AMp constant RMS, 30A max.6. Designed to support 4-6s Lipo, but work well with 3S also.7. Only 2.5 grams each piece and 10 grams for a set of 4 pieces.* Packaging for a set of 4pcs. If you order only one piece, the ESC will be packed in a plastic bag.

    Review: Write a Review



    Weight: 0.10 kg

  • ZMR210R 210mm Racing Quadcopter Frame Kit with PCB Board

    ZMR210R PID Tuning by The RCAddictThe ZMR210R is built for high performance FPV drone racing. We have listened to many experienced pilots and changed the bottom plate to one piece for exceptional strengh improvement. The ZMR210R is an evolution of the ZMR design, in keeping up with the changing times this ZMR was re-worked from the ground up. We are not just modifying the arms to give a "X" type of layout, we have re-worked it entirely to provide what the modern user wants. The ZMR210R is an airframe designed with strength in mind. This bare bones racers is a simple X style unibody design with a small footprint. Keeping strength in mind we have left out the cut outs that usually add weight reduction and an estetic appeal and decided wed make up the weight reduction by focusing on a smaller frame while leaving enough area to still comfortably install all the components for the build. This frame features routed edges that gives a smooth rounded surface to all edges of the carbon fiber which helps eliminate delaminated edging for those unavoidable strikes that everyone experiences....making this a perfet choice for those that are looking for a simple, durable, and lite frame.For your easy build, several ZMR210R ARF combos are also available to meet your specail requirements.Want to know more about ZMR210R? Join the discussion at the ZMR210 Owners Facebook Group! Weight: 117 grams (Frame and hardware totally ) Includes:1x 4mm Main Frame1x 2mm Top Frame1x Camera mount (for Foxeer Arrow V2 HS1190 or Runcam Swift style cameras. )1x Set of Steel screws, aluminum mounting hardware, and standoffs 1x Matek PDB 2x FPVModel velcro strapYou may also like: (Not Included) FPV Protection Kit for Mini Racing Quad

    Review: Write a Review



    Weight: 0.50 kg

  • HobbyTiger BC-1S06 Lipo 6 Port Battery Charger Balance Quick

    Description:Item name: 6 Port Battery Balance ChargerInput voltage: DC 7-30V (12V/4A recommended)Cutoff voltage: 4.16V-4.24V per cellUSB output: 5V/3ACharge current: 6*500mADimension: 80x50x20mmLighting: chargingExtinguished: completedFlashing: no battery Features:Support 6 X 1s Li-po batteries charging at the same time.High charging efficiencyEnergy saving and environment protecting.Suitable for charging when flying outside.

    Review: Write a Review



    Weight: 0.30 kg

  • Replacement Kit of Frame, Cover, Props and Motors for X-Racer X-1

    This is the accessories package for X-Racer X-1 and DIY purpose.  Including the cover, frame, props and motors.

    Review: Write a Review



    Weight: 0.25 kg

  • Set of Flight Controller, Camera, TX and Antenna for X-Racer X-1

    This is the accessories kits for X-Racer X-1 and DIY purpose.  Including Flight Controller, Camera, TX and Antenna. These parts have been soldered and tested before shipping.Features:1. Pre-flashed with the latest Betaflight firmware. 2. Micro 5.8g 48ch Vtx. 3. FC is compatible with FrSky & SBUS, USB port ready.4. Micro FPV HD Camera.

    Review: Write a Review



    Weight: 0.40 kg

  • FrSky Taranis Q X7 2.4GHz 16CH Transmitter

    Before Purchasing: The Taranis Q X7 will be started to ship out on March 29th, this Wednesday.Main Features:- Quad ball bearing gimbals for precise control- Receiver match- Audio speech outputs ( values, alarms, settings, etc. )- Antenna status detection and adjustment- Real-time flight data logging- Receiver signal strength indicator ( RSSI ) alerts- Vibration alerts- Super low latency- Smart port supported- Open source firmware OpenTX- Model configuration files compatible with TARANIS X9D / X9D Plus / X9ESpecifications:Model: TARANIS Q X7Number of channels: 7 ( default ), up to 16Operating voltage range: 6 - 15V / 2 - 3S LiPoOperating current: 210mA at maximum ( when both RF module and backlit are on )Operating temperature: -10 to 45 Deg.CBacklit LCD screen: 128 x 64 ( readable outdoors )Model memories: 60 ( extendable by micro SD card )Compatibility: FrSky X series / D series / V8 - II series receivers ( plus other receivers if an external module is used )

    Review: Write a Review



    Weight: 1.50 kg

  • X-Racer X-1 BNF / DIY Combo - Optional

    Agile, safe and fun. The X-Racer X-1 is an ultra-micro FPV drone designed for indoor flying in even the smallest of places. It is an amazing gift to the first time pilot.  We have two combos for you: One is the FPV Ready Bind-n-Fly version without transmitter, the other is the DIY combo with all the BNF parts included.  No soldering or 3D printing required for both of the two combos! If you like Do it Yourself,  choose the DIY combo, the assembly is simple and quick.   We understand that some of you just want to fly and enjoy the race. So you can also just choose the BNF version and leave all the assembly & testing job to us. The BNF version is a fully assembled kit and it is fully tested before shipping. All firmwares are loaded and customers just need to bind with their Frsky transmitter and enjoy the flight.Main Features:1. Pre-flashed with the latest Betaflight firmware. 2. Micro 5.8g 48ch Vtx. 3. FC is compatible with FrSky & SBUS, USB port ready.4. Micro FPV HD Camera.5. The case is available in various colors. (Blue, Gray, Yellow, Rose Red, optional)6. The BNF version is completely assembled that just need to bind with the Taranis then fly.7. No soldering or 3D printing required.Package Included in DIY Combo (All assembled in BNF combo):X-Racer X-1 Frame x 1X-Racer X-1 Cover x 1 (Blue, Grey, Yellow, Rose, optional)Set of Flight Controller, Camera, TX and Antenna x 1 (Pre-soldered)X-Racer HV 1S 250mah 3.8v 60C Hight Voltage Battery x 1 (2 Batteries in BNF combo)Dragonfly 7x16mm 19000KV Coreless Motor for X-Racer x 4 (2cw + 2ccw)X-Racer 31mm 4 Blade Clear Propellers x 8 (4cw + 4ccw)X-Racer X-1 USB charger x 1Set 1:  DIY combo, need to assemble the parts by yourself.Set 2:  BNF combo: All parts have been assembled and tested before shipping. Bind to you favorite FRsky transmitter and youll be in the air right away. 

    Review: Write a Review



    Weight: 0.80 kg

  • New Multi-functional FPVmodel Motor Grip Pliers For RC Models

    This is a new version of FPVmodel motor grip pliers with multi-functions.  They are designed to make your prop changes much easier than ever before, the FPVModel Motor Grip Pliers are suitable for 2204, 2205, 2206, 2207, 1306, 1406 and 1806 sized motors, also the antennas and m5 motor lock nuts. You will no need to worry about the damage to the motors, props and locknuts when removing them any more.Comparing to the previous version, the new version can not only used for the removal of motors and props, but also can be used for adjust the FPV cameras and radios. Specs:Item Name: Motor Grip PliersMaximum opening: 45mmWeight: 57gPackage Included:1 Motor Grip Pliers2 sets of rubber tape

    Review: Write a Review



    Weight: 0.20 kg

  • $17.99


    Weight: 0.10 kg

  • ***Pre-order*** EMAX RS2306 2400kv/ 2750kv White Editions RaceSpec Brushless Motor

    Before Purchasing: We are now taking pre-orders on the EMAX RS2306 Motos.  The estimated shipping date is March 31st. Thanks for your patience in advance.The RS2306 was designed to set a new standard of power and response for pilots seeking the ultimate in flight performance. With nearly twice the level of thrust of the original Red Bottom, the new RS2306 sets the bar even higher by pushing 2kg of thrust with 5045x3 propeller on 5S or 6045x3 on 4S.Latest design language used in RS2205-S have been carried over to the RS2306. Lighter bell, hollowed steel shaft, bigger bearings, lower profile, and kept the overall diameter just 0.4mm wider than RS2205-S!Specification:-2kg Thrust from a 2306 class motor!-Larger Stator for smooth, responsive power.-BEEFY 4mm Hardened and Tempered Hollow Steel Shaft: Breaking shafts are a thing of the past.-0.15mm High Silicon-Steel Laminations: Higher volume of silicon increases electrical resistance in the lamination, reducing eddy-currents within the system (Translates electrical energy into mechanical energy more efficiently.). -High quality 4mm Inner Diamter Steel Ball Bearings.-1.8mm N48SH Arc magnets (thinner and lighter which allow lower mass on the outer portion of the bell, resulting in faster acceleration. Less energy lost and more power delivered to the propeller).-Special Edition Matte White Bell.-Hex head bell fastener for easy servicing or bell replacement.-PROPLOCK base for future performance-matched propellers: This anti-slip design locks in the propellers on to the motor to prevent Prop slippage during the hardest obstacle strikes.-34 grams - Contrary to what most pilots say about motor weight Lighter is not always better. In this class of a motor that pushed 1,000s of grams of thrust, 34g is the absolute minimum without compromising structural integrity.RS2306 2400kv Data:RS2306 2750kv Data:

    Review: Write a Review



    Weight: 0.15 kg

  • FOXEER Arrow V3 2.5mm FPV Camera (OSD & MIC built-in) Blue

    SpecificationCCD:    1/3” Sony SUPER HAD II CCD Pixel PAL:   976(H) x 494(V);NTSC: 768(H)×494(V) TV System:    PAL/NTSC(according to country) Resolution:   650TVL(b/w), 600tvl(color) OSD:   Edit Name, Power, Flying time Synchronization:    internal synchronize Shutter Speed (CCD IRIS):    PAL: 1/50~1/100000 sec; NTSC: 1/60~1/100000 sec Noise:    > 60 (AGC OFF) Video Out:    75ohm, synchronize Min. Illumination:    0.01Lux Auto Gain:    Off/Low/Mid/High Back Light Compensation (BLC):    Off /Back light compensation/ Strong light suppression Private shading (PRIVACY):    1~8 private shading area Motion Detection (MD):   On/ Off (Multi level sensitivity settable) Auto White Balance:    Manual / Auto / Auto track Mirror:    Horizontal Mirror optional Negative:    Positive / Negative optional Color to B&W:    Auto DNR:    2DNR WDR:    D-WDR Day / Night Shift:    Auto/ Color/ B&W Menu (OSD):    English menu White Dot Repair:    Support Image Adjustment:    Support Camera Title:    Support Power Requirement:    DC5V~35V Working Temperature:     -10 C ~ 50 C Working Humidity:    20~80% Storage Temperature:    -40 C ~ 60 C Storage Humidity:    20~95% Dimensions(mm):    26X26(W*L) Power Consumption:    70mA Color:    Blue only

    Review: Write a Review



    Weight: 0.15 kg

Find us on Google+ Watch us on Youtube Like us on Twitter Follow us on Facebook

Home   |   New Products   |   Multi-Rotors   |   FPV Airplanes   |   FPV Equipment   |   Battery / Chargers   |   Tools & Accessories   |  Site Map


Copyright © 2015 FPVMODEL.COM®. All Rights Reserved.