Here comes the Replacement Motor Bell for Dragonfly Hurricane 2207 motors. Get your dented motors back to the track! Each motor bell has been dynamically balanced and works perfectly for Dragonfly Hurricane 2207 1700kv/2300kv/2500kv motors.Includes:1 x Dragonfly Hurricane 2207 Replacement Motor Bell
Weight: 0.15 kg
Specifications:Frequency: 5.7~5.9Ghz VSWR: ≤2.5 @5700 MHz ~5900 MHzGain definition: 2dBi ( *Typical* )Band definition: 4900 MHz ~5900 MHzImpedance definition: 50 ohmSignal transmission directionality: High Gain omnidirectional antennaConnector type: Ipex connector Antenna Length: 60MM
$12.50 $11.38, Save 9% OFF
Weight: 0.28 kg
Electrical Specifications:Frequency Range (MHz): 5100-5150/5750-5800Bandwidth (MHz): 50/50Input Impendence (Ω): 50V.S.W.R: ≤1.5Gain (dBi): 2.0Polarization Type: Vertical polarizationLightning Protection: DC groundingPower Capacity (w): 50Mechanical Specifications:Antenna Length (mm): 60MM±1MMRadiator: CuprumConnect Type: WeldingWorking Temp(℃): -40~60Storage Temperature(℃): -20~40Weight (g) :0.5±1
$12.50 $7.50, Save 40% OFF
Weight: 0.10 kg
Matek M3 vibration damping standoffs help to reduce vibrations on your camera or flight controller.Includes:- 4pcs M3*7*4.5 mm Rubber Vibration Damping Standoffs
Designed to protect your motor while racing. The motor will not be easily loose.Plastic Motor Screws Bumpers - Weight: 2g/pc- Material: Plastic
$1.50 $0.75, Save 50% OFF
Designed to protect your Lipo battery when the battery is strapped to the bottom of your racing quad, suitable for KL200race and many more. Plastic Molded Battery Skateplate- Weight: 14g- Material: Plastic
MATEK Lost Model Beeper & FPV FC 5V Loud Buzzer can be used on triditional PWM receivers or FPV racing flight controller.The tiny buzzer is drived by on board MCU. It can output louder sound than 5V active buzzers.Features & Spec.:- Built-in MCU- Working voltage range: 4.5~5.2V DC- Power: 1W Max.- Sound Output: 90dB Max.- Size & Weight: 18x13x8mm, 2g
Specifications:- Power supply voltage: +3.5~+5.3 V- Input voltage: -0.5～+0.5 V- Operation junction temperature:-25～+80 ℃- Storage temperature range:-55~+150 ℃- Can be used for NAZE 32- Size: 51mm*10mmApplications- Naze 32 LED Strip with CleanFlight, AVR, Arduino, PIC, mbed, etcNote : only the LED board
Weight: 0.05 kg
Specifications:INPUT: 14~17V DCWeight: 2gPacking: LED BOARD 12V, 1pcs, Cable 0.3mSelectable Colors:B ON =Blue, 0.4WR ON =Red, 0.4WG ON =Green, 0.4WB+R =Megenta, 0.8WB+G =Cyan, 0.8WR+G =Yellow, 0.8WB+R+G =White, 1.2W
The connecting cable specially designed for open source flight controller such as Naze32 to connect with radio receiver,sturdy and durable.
$2.00 $0.96, Save 52% OFF
Length:20cmNote:this antenna can be used for all of the 1.2g/2.4g/5.8g frequency.Specially designed for 1.2g/2.4g/5.8g VTX/RX antenna extension,sma to sma jack interface.BY the antenna extension cable,you can get a better arrangement for your cabin equipments.Reduce the interference of equipments with each other and it wont reduce the power of antenna.
Find us on Google+ Watch us on Youtube Like us on Twitter Follow us on Facebook
Copyright © 2015 FPVMODEL.COM®. All Rights Reserved.