Sorted:
  • X-Racer X9 Micro Racing Quad DIY Combo

    X-Racer X9 FPV flyBefore Purchasing:The X-Racer X9 does not come with the receiver. If you are using the Frsky transmitter, we suggest use FrSky XM 16 Ch Micro SBUS Receiver. If you are using other RC transmitters, you will use other mini transmitters accordingly.The camera in the combos is in PAL version. If you need the NTSC version, please leave message at the checkout, thank you.The DIY version contains the parts that you need to build, but they are not assembled yet. Please note that you will still need to purchase the battery, radio control and transmitter if you do not have them.The DIY combo  does not have the protection cover. If you need the cover pls paid 3 USD via Special Service.Following the X-Racer KL-EX90, FPV Model now has another 2" propeller 90 class micro racer. The ultralight micro racer comes with Runcam Micro Swift CCD camera which is the smallest FPV camera that use 1/3" CCD sensor in FPV community. No more blurry and dull image like youll have on other micro class. You will get the same good quality video on this micro racer like you did with normal Runcam Swift.Micro class FPV racing is more and more popular. Comparing to the regular 5" racing quads, these little stuff have many advantages. You can fly or race with them at anytime any where you like. Because they are so light in weight and so small in size, you do not need to register with FAA if you are from the United States to fly them.Equipped with the mini Raceflight Millivolt flight controller and Raceflight Spark 4n1 ESC, you will gain the best performance that you never had before. The Millivolt presents not only the BEST performance, but also the most STABLE performance due to the amazing vibration rejection technology implemented in RaceFlight. In addition to these, the X9 is equipped with the powerful Dragonfly MC1105 7500KV motors which has been proven very powerful with X-Racer KL-EX90. Features:Small in size and light in weight. All-up-weight is 83 grams only without battery. Do not require the hassles of getting it registered with the FAA if you are from the United States.2s / 3s lipo. Excellent power with just a 2S battery, even more powerful with 3S. It gives you very high speed, very precise and rail-like handling.Fast as other 5" 4S racing quads. Use Runcam Micro Swift, the worlds smallest and lightest CCD professional camera. It has the same performance to reputable Runcam Swift and Swift Mini.Equipped with the mini Raceflight Millivolt flight controller and Raceflight Spark 4n1 ESC. The Millivolt presents not only the BEST performance, but also the most STABLE performance due to the amazing vibration rejection technology implemented in RaceFlight. .Equipped with powerful and reliable micro Dragonfly MC1105 7500kv brushless motors. Gemfan 2035BN 4-blade propellers are almost unbreakable, extremely smooth and guaranteed to exceed your expectations.A Dragonfly 25mw 48ch Vtx with protective coating is inlcuded to give an even more aero dynamic low profile design for the video transmission. Parts Included:1 x X-Racer X9 Frame4 x Dragonfly MC1105 6000kv Motor1 x Raceflight Millivolt Flight Controller1 x Raceflight Spark 4n1 ESC1 x RunCam Micro Swift 2 FPV Camera (Update on September 12th.)1 x Dranonfly 5.8g 25MW 48CH Vtx4 Pairs x GemFan 2035BN 4-Blade Propellers1 x 16AWG Silicon Wire1 x Amass XT30 Plug Male16 x M2*4 Screws16 x M2*6 Screws10 x M2*7 Screws4 x M3*18 Screws7 x M2*19 Aluminum Standoff10 x M3 Black Nylon NutX-Racer X9 Brief Installation Manual: PDF DownloadFriendly reminder: The DIY version contains the parts that you need to build, but they are not assembled yet. The battery and transmitter that shown on the pictures are not included. 

    $228.00 $169.99, Save $58.01 OFF

    SKU:X9ARF

    Weight: 0.30 kg

  • X-Racer X9 Micro Racing Quad BNF

    X-Racer X9 FPV flyBefore Purchasing:It takes about 1 to 3 days for us to build and test the BNF version. If you are experienced in building, it would be better purchase the DIY version to build by yourself to save the time.The X-Racer X9 does not come with the receiver. If you are using the Frsky transmitter, we suggest use FrSky XM 16 Ch Micro SBUS Receiver. If you are using other RC transmitters, you will use other mini transmitters accordingly.The camera in the combos is in PAL version. If you need the NTSC version, please leave message at the checkout, thank you.Following the X-Racer KL-EX90, FPV Model now has another 2" propeller 90 class micro racer. The ultralight micro racer comes with Runcam Micro Swift CCD camera which is the smallest FPV camera that use 1/3" CCD sensor in FPV community. No more blurry and dull image like youll have on other micro class. You will get the same good quality video on this micro racer like you did with normal Runcam Swift.Micro class FPV racing is more and more popular. Comparing to the regular 5" racing quads, these little stuff have many advantages. You can fly or race with them at anytime any where you like. Because they are so light in weight and so small in size, you do not need to register with FAA if you are from the United States to fly them.Equipped with the mini Raceflight Millivolt flight controller and Raceflight Spark 4n1 ESC, you will gain the best performance that you never had before. The Millivolt presents not only the BEST performance, but also the most STABLE performance due to the amazing vibration rejection technology implemented in RaceFlight. In addtion to these, the X9 is equipped with the powerful Dragonfly MC1105 7500KV motors which has been proven very powerful with X-Racer KL-EX90. Features:Small in size and light in weight. All-up-weight is 83 grams only without battery. Do not require the hassles of getting it registered with the FAA if you are from the United States.2s / 3s lipo. Excellent power with just a 2S battery, even more powerful with 3S. It gives you very high speed, very precise and rail-like handling.Fast as other 5" 4S racing quads. Use Runcam Micro Swift, the worlds smallest and lightest CCD professional camera. It has the same performance to reputable Runcam Swift and Swift Mini.Equipped with the mini Raceflight Millivolt flight controller and Raceflight Spark 4n1 ESC. The Millivolt presents not only the BEST performance, but also the most STABLE performance due to the amazing vibration rejection technology implemented in RaceFlight. .Equipped with powerful and reliable micro Dragonfly MC1105 7500kv brushless motors. Gemfan 2035BN 4-blade propellers are almost unbreakable, extremely smooth and guaranteed to exceed your expectations.A Dragonfly 25mw 48ch Vtx with protective coating is inlcuded to give an even more aero dynamic low profile design for the video transmission. Parts Included:1 x X-Racer X9 Frame4 x Dragonfly MC1105 6000kv Motor1 x Raceflight Millivolt Flight Controller1 x Raceflight Spark 4n1 ESC1 x RunCam Micro Swift 2 FPV Camera (Update on September 12th.)1 x Dranonfly 5.8g 25MW 48CH Vtx4 Pairs x GemFan 2035BN 4-Blade Propellers1 x 16AWG Silicon Wire1 x Amass XT30 Plug Male16 x M2*4 Screws16 x M2*6 Screws10 x M2*7 Screws4 x M3*18 Screws7 x M2*19 Aluminum Standoff10 x M3 Black Nylon NutX-Racer X9 Brief Installation Manual: PDF Download

    $242.99 $199.99, Save $43.00 OFF

    SKU:X9BNF1

    Weight: 0.30 kg

  • X-Racer X-1 V2 DIY Combo

    X-Racer X-1 V2 Build & BindingBefore Purchasing: Due to the air regulation, the batteries can only be shipped to following countries by E-packet:Canada, Australia, France, Germany, United Kingdom and United States. By Registered Airmail Shipping: Japan, Brazil and Russia.  If you are from other countries, please choose DHL for shipping. Thank you.Agile, safe and fun. The X-Racer X-1 V2 is an ultra-micro FPV drone designed for indoor flying in even the smallest of places. It is an amazing gift to both the first time pilot and advanced pilots.  We have two combos for you: One is the FPV Ready Bind-n-Fly version without transmitter, the other is the DIY combo with all the BNF parts included.  No soldering or 3D printing required for both of the two combos!  If you like Do it Yourself,  choose this DIY combo, the assembly is simple and quick. Or if you prefer a  BNF Combo, please click here!Main Features:1. Pre-flashed with the latest Betaflight firmware. (Its recommended not to re-flash with other firmware which might cause problems)2. Micro 5.8g 48ch Vtx. 3. FC is compatible with FrSky & SBUS, USB port ready.4. Micro FPV HD Camera.5. The cover is available in various colors. (Blue, Gray, Yellow, Rose, optional )6. The BNF version is completely assembled that just need to bind with the Taranis then fly.7. No soldering or 3D printing required.Package Included in DIY Combo:X-Racer X-1 V2 Frame x 1X-Racer X-1V2  Cover x 1 (Blue, Grey, Yellow, Rose, optional)Set of Flight Controller, Camera, TX and Antenna x 1 (Pre-soldered, Camera in PAL format)X-Racer HV 1S 250mah 3.8v 60C Hight Voltage Battery x 1 Dragonfly 7x16mm 14000KV Coreless Motor for X-Racer x 4 (2cw + 2ccw)X-Racer 31mm 4 Blade Clear Propellers x 8 (4cw + 4ccw)X-Racer X-1 USB charger x 1You might also like: HobbyTiger BC-1S06 Lipo 6 Port Battery Charger or 4 Ports 1S Lipo Charger With XT60 Plug

    $48.99

    SKU:X1FC2

    Weight: 0.35 kg

  • X-Racer X-1 V2 BNF with Two Batteries

    X-Racer X-1 Review by the RCAddictNote: Due to the air regulation, the batteries can only be shipped to following countries by E-packet:Canada, Australia, France, Germany, United Kingdom and United States. By Registered Airmail Shipping: Japan, Brazil and Russia.  If you are from other countries or areas, please help to choose DHL for shipping.Note: The BNF needs 1 to 3 days to test and assembly.The X-Racer X-1 micro racer is making a return with an all new with the F3 brushed flight controller. We are always listening to what our customers say and we have made some improvements accordingly. Now the new X-Racer X-1 F3 Fight Controller V2 comes with Frsky Rx and OSD Integrated.Agile, safe and fun. The X-Racer X-1 is an ultra-micro FPV drone designed for indoor flying in even the smallest of places. It is an amazing gift to both the first time pilot and advanced pilots.  We understand that some of you just want to fly and enjoy the race. So you can also just choose the BNF version and leave all the assembly & testing job to us. The BNF version is a fully assembled kit and it is fully tested before shipping. All firmwares are loaded and customers just need to bind with their Frsky transmitter and enjoy the flight.Main Features:1. Pre-flashed with the latest Betaflight firmware. (Its recommended not to re-flash with other firmware which might cause problems)2. Micro 5.8g 48ch Vtx. 3. FC is compatible with FrSky & SBUS, USB port ready.4. Micro FPV HD Camera.5. The case is available in various colors. (Blue, Gray, Yellow, Rose, optional )6. The BNF version is completely assembled that just need to bind with the Taranis then fly.7. No soldering or 3D printing required.Package Included in BNF Combo :X-Racer X-1 V2 Frame x 1X-Racer X-1 V2 Cover x 1 (Blue, Grey, Yellow, Rose, optional)Set of Flight Controller, Camera, TX and Antenna x 1 (Pre-soldered, Camera in PAL format)X-Racer HV 1S 250mah 3.8v 60C Hight Voltage Battery x 2 Dragonfly 7x16mm 14000KV Coreless Motor for X-Racer x 4 (2cw + 2ccw)X-Racer 31mm 4 Blade Clear Propellers x 8 (4cw + 4ccw)X-Racer X-1 USB charger x 1You might also like: HobbyTiger BC-1S06 Lipo 6 Port Battery Charger or 4 Ports 1S Lipo Charger With XT60 Plug

    $59.99 3

    SKU:X1FC

    Weight: 0.40 kg

Find us on Google+ Watch us on Youtube Like us on Twitter Follow us on Facebook

Home   |   About Us   |   New Products   |   Multi-Rotors   |   FPV Airplanes   |   FPV Equipment   |   Battery / Chargers   |   Tools & Accessories   |   Contact Us   |   Blog   |  Site Map

Product Tags: ABCDEFGHIJKLMNOPQRSTUVWXYZ0-9

Copyright © 2015 FPVMODEL.COM®. All Rights Reserved.