This silicone wire with pure copper pre-tinned for easy soldering and corrosion resistance. The highest grade of copper and pure silicone insulation provide maximum power and easy solderingColor: Red Length: 1MeterType : 12AWG,14AWG ,16AWG ,18AWG,20AWG,22AWG,24AWG, 26AWG, 28AWG (optional)
Weight: 0.05 kg
Braking RGB lights for multi-rotorsDescription:Item Name: Braking RGB Lights Board / Stop Light Board Board Size: 60 x 12mmWeight: 2.6g (Without cables) Features:The multicopter brake light makes flight status of aircraft just like car taillight visual display. Simple installation, the real-time image across the back can quickly judge the flight status in front of the aircraft. Note:Forward Flying–The tail light shows greenStop Flying–The tail light shows redBackward Flying–The tail light shows white Package Included:1 x Stop light board 1 X Y cable1 X Extension Y cable1 X Double-sided adhesive
$5.39 $1.51, Save 72% OFF
Specifications:- Power supply voltage: +3.5~+5.3 V- Input voltage: -0.5～+0.5 V- Operation junction temperature:-25～+80 ℃- Storage temperature range:-55~+150 ℃- Can be used for NAZE 32- Size: 51mm*10mmApplications- Naze 32 LED Strip with CleanFlight, AVR, Arduino, PIC, mbed, etcNote : only the LED board
Futaba adapter cable with a square Micro-pin buddy port220mm Long
Weight: 0.12 kg
Specifications:INPUT: 14~17V DCWeight: 2gPacking: LED BOARD 12V, 1pcs, Cable 0.3mSelectable Colors:B ON =Blue, 0.4WR ON =Red, 0.4WG ON =Green, 0.4WB+R =Megenta, 0.8WB+G =Cyan, 0.8WR+G =Yellow, 0.8WB+R+G =White, 1.2W
The Arduino Nano is a small, complete, and breadboard-friendly board based on the ATmega328. It has more or less the same functionality of the Arduino Duemilanove, but in a different package. It lacks only a DC power jack, and works with a Mini-B USB cable instead of a standard one.The Nano 3.0 has a number of facilities for communicating with a computer, another Arduino, or other microcontrollers. The ATmega328 provides UART TTL (5V) serial communication, which is available on digital pins 0 (RX) and 1 (TX). An FTDI FT232RL on the board channels this serial communication over USB and the FTDI drivers (included with the Arduino software) provide a virtual com port to software on the computer. The Arduino software includes a serial monitor which allows simple textual data to be sent to and from the Arduino board. The RX and TX LEDs on the board will flash when data is being transmitted via the FTDI chip and USB connection to the computer (but not for serial communication on pins 0 and 1).*Note: This is not an original Arduino brand product, it is manufactured with the same components and functionality by a different manufacturer.Specs:Microcontroller: ATmega328Operating Voltage (logic level): 5VInput Voltage (recommended): 7-12VInput Voltage (limits): 6-20VDigital I/O Pins: 14 (of which 6 provide PWM output)Analog Input Pins: 8DC Current per I/O Pin: 40mAFlash Memory: 32KB (ATmega328) of which 2 KB used by bootloaderSRAM: 2KB (ATmega328)EEPROM: 1KB (ATmega328)Clock Speed: 16 MHzDimensions: 43 x 18 x 19mmWeight: 6g
Weight: 0.10 kg
VHB High density and strong tack 3M double sided foam sponge adhesive tape.Ultrathin size but with super strong holding power.Traceless and Waterproof,you will no need worry about the ugly left on you lovely plane.This is a good assistant for your plane building work.High heat resistance:the anti-heat temp up to 70° .Size:84x53x0.64mmQuantity:2 pcs
Prop adapter for Dragonfly 1806 motor,A replacement for the 1806 motor,if yours lost or broken,you can buy it from here.CW or CCW thread,choose which you need.Note:This prop adapter also compatible with FPVMODEL 1806 2300KV motor or Dragonfly and FPVMODEL 2204/2206 motors.
Quality power supply conversion cable.Suitable for receiver or monitor to connect with LI-PO battery.
$3.99 $3.67, Save 8% OFF
L style 90° SMA male to female adapter,suitable for your special antenna mounting requires.
L style 90° RP-SMA male to female adapter,suitable for your special antenna mounting requires.
$18.90 $6.99, Save 63% OFF
Special features:DALRC 20A High Current 3.7-28V Input remote control Electronic SwitchHigh current, high reliability, support high voltage receivers, compact size, light weight.18AWG silicon wires for power, super soft silicon wires for signal as well. Application examples:Switch for cars/ airplanes lights.Switch for electronic devices like camera, A/V transmitter etc. (connect "positive" wire disconnecting the main power supply, using common GND wire)Gas/Nitro Engine ignition control, smog control etc.; You can connect electric heating wire to the device for ignition control. Specifications:Input voltage: 3.7-28VInput current: < 20AControl signal type: PWM signalPower supply wires: 18AWG siliconPower wire total length: 20CM (approx)Weight: 12gDimension: 30 x 16 x 4mm (excluding wires)
$7.90 $4.90, Save $3.00 OFF
Special features:DALRC 30A High Current 3.7-28V Input Remote Control Electronic SwitchHigh current, high reliability, support high voltage receivers, compact size, light weight.18AWG silicon wires for power, super soft silicon wires for signal as well. Application examples:Switch for cars/ airplanes lights.Switch for electronic devices like camera, A/V transmitter etc. (connect "positive" wire disconnecting the main power supply, using common GND wire)Gas/Nitro Engine ignition control, smog control etc.; You can connect electric heating wire to the device for ignition control. Specifications:Input voltage: 3.7-28VInput current: < 30AControl signal type: PWM signalPower supply wires: 18AWG siliconPower wire total length: 20CM (approx)Weight: 12gDimension: 30 x 16 x 4mm (excluding wires)
Freeflight Velcro Battery Strap 350mm X 25mmStrong stick force,high qualityblack in colorQuantity：2 pcs
$2.99 $0.99, Save $2.00 OFF
Weight: 0.01 kg
This is a special service fee for shipping difference, assembly and PI customers etc.Thank you for your purchase with FPVMODEL. Please add the same quantity as your needed cost to shopping cart and pay it as a normal order. After the payment, please leave a note to let us know what it is for. Any questions please feel free to contact us.
Weight: 0.00 kg
Length:4.5cm Width:9mm3s power supplyColor:Red,Blue,Green ,White (optional)Quantity:2 pcsSpecially designed for mini multirotor such as QAV250,ZMR250 etc.We suggest you use the 3M adhesive tape to fix for it and it will help you easy to modify later.
$3.90 $1.37, Save 65% OFF
Universal Anti-interference Copper Foil Sticker for Autopilot,GPS etc,with good shield function that it can be used for ESC,GPS,flight controller etc which easy to be disturbed or disturb other things to keep anti-interference and noise wave away.Good heat conduction and easy to stick.Length:5cmWidth:2cmQuantity:10 pcs
$2.90 $0.58, Save 80% OFF
Mini Voltage regulator module,it can be used for power directely supply to transmitter,very useful and convenient.Input voltage:3.2-5Voutput Voltage:5VOutput current:1 ALength:2 cmwidth:1 cm
$6.90 $1.93, Save 72% OFF
Find us on Google+ Watch us on Youtube Like us on Twitter Follow us on Facebook
Copyright © 2015 FPVMODEL.COM®. All Rights Reserved.