• Multi Color 6061 Aluminum Alloy M3*35mm Knurled standoff 10pcs

    Specification:- Size: M3*35- Color: Optional- Material: 6061 aluminum alloy- Pack: 10pcs- Weight: 12g ( 10pcs )Features:Much lighter but stronger and more durable. Multiple colors available for your choice. Please take note that due to the hardness, please do not lock the nuts forcibly. 6061 Alloy main alloying elements are magnesium and silicon to form Mg2Si phase. Fadeless and anti-static electricity.GB/ pass RoHS Surface treatment : AnodizingNote: The different batches may have a slight color difference.

    $6.99 $2.94, Save 58% OFF 1


    Weight: 0.10 kg

  • Multi Color 7075 Aluminum Alloy M3*6 Hex Screws 10pcs

    Specification:- Size: M3*6- Color: Optional- Material: 7075 aluminum alloy- Pack: 10pcs- Weight: 2g ( 10pcs )Features: Much lighter but stronger and more durable. Multiple colors available for your choice. Please take note that due to the hardness, please do not lock the nuts forcibly. Note: The different batches may have a slight color difference.

    $7.69 $3.08, Save 60% OFF


    Weight: 0.10 kg

  • Matek HUBOSD Eco H-Type w/ STOSD8 Dual BEC Current sensor 140A OSD

    HUBOSD8 has been engineered to provide the highest possible performance and reliability in a 46*36mm & 4 layers PCB. It is a multifunctional HUB with PDB, BEC 5V/2A &12V/500mA, Current sensor 140A, STOSD8. It is specially made for the mini FPV Quad. The BEC 12V is linear regulator, no LC Filter needed. Built-in STOSD8 can support Plug & Play, no complicated settings needed.Download Manual hereDownload STOSD Tool Software hereSpecifications:Input: 8~ 21V (3-5S LiPo)PDB: 4x30A (Max.4x35A)Regulated 5V and 12V outputsCurrent Sensor 140ABuilt-in STOSD8Physical:- 2oz copper, 4-layers &1.6mm PCB.- 1x Battery input, 4x ESC outputs. 2x BEC 5V outputs, 2x BEC 12V outputs.- Camera signal & Gnd pads, Video Transmitter Signal & Gnd pads- 1x Serial port (RX, TX, G)- Dimensions: 46x36x4mm, Weight: 8.5g- Mounting holes 30.5mm square spacing,Φ3mmPDB (ESC outputs)Continuous current: 30A per output Peak current (10 seconds/minute): 35A per outputBEC 5V outputsDesigned for RC Receivers, Flight controllers, OSD, and Servos.DC/DC synchronous buck regulator.Voltage: 5.0 +/- 0.1VDCContinuous current: 2 Amps (Max.2.5A 10s/minute)Output Ripple: 40mV (VIn=16V, VOut=5V@2A load)Short-circuit tolerant (5 seconds/minute)BEC 12V outputsLinear regulator, very low noise. LC Filter is needless.Designed for Video TX or FPV camera.Voltage: 12.0 +/- 0.3VDC (4~5S operation)Continuous current: 500mA@16V IN, 400mA@20V INShort-circuit tolerant (2 seconds/minute)If the battery is 3S LiPo, Output voltage=3S LiPo voltage - 1V

    $16.99 $9.99, Save $7.00 OFF


    Weight: 0.10 kg

  • FPV Model Sports Cap

    Show your brand pride all over town with this stylish hat from FPV Model. These are the FPV Model snap-fit caps specially designed for you. Made in a very reputable factory with only the highest quality materials. One size fits all. Two styles available with adjustable sizes. One is with strapback, the other is with snapback. If you are planning to go out for an outdoor event, these FPV Model Sports Hats are the best choice for you.Style A: FPV Model Strapback CapStyle B: FPV Model Snapback Cap 

    $9.99 $7.19, Save 28% OFF


    Weight: 0.20 kg

  • FPVMODEL Leather Velcro Battery Strap 200mm x 14mm (4pcs)

    FPVMODEL Leather Velcro Battery Strap 200mm x 14mm (4pcs)Specifications:Name: FPVMODEL Velcro Battery StrapSku#: 4MLVSSize: 200mm x 14mmColor: Black Quantity:4 pcs/kit



    Weight: 0.10 kg

  • FPV Transmitting SMA Female Antenna Extension Cables

    FPV Transmitting SMA Female Antenna  Extension Cables. A simple extension cable for better placement of your antenna. Specifications:- Connector A: Straight - Connector B: Right Angle - Cable Length: 35mm (cable only)Note: This extension cables specially used for the Dragonfly 5.8G 40CH Mini TX 25mw/200mw.

    $1.99 $0.99, Save $1.00 OFF


    Weight: 0.05 kg

  • 3.5mm Audio & Video male to male plug

    3.5mm Audio & Video male to male plug



    Weight: 0.10 kg

  • FPVModel FPV Ring RaceGates 2pcs / 4pcs / 6pcs

    ZMR210R PRACTICE WITH RING RACEGATES BY "HKFPVR" KAKEI LEUNGFPVMODEL RaceGates gives the user the ability to map their tracks out with ease using this simple design that can be setup in minutes. Using the simplicity of collapsable tent poles and Polyester Oxford 210D fabric, these gates come in a handy carry along bag, giving you the freedom to race anywhere in just a moments notice. These FPVModel RaceGates are designed by FPV racers for FPV racers. The Ring design adds challenge for racing, but also a lot of fun.  We also have the standard arched Race Gates and big arched Race Gates for your choice. FPVModel Ring RaceGates Specifications:Material: Polyester Oxford 210DSize: S, M, L (optional)Note: The two standing poles for each gate (showed as the pictures) are not included.Free DHL/ Fedex/ EMS express shipping!!! Due to the system limit, the orders from some countries may be not able to choose DHL/ Fedex/ EMS for free shipping, please help to choose other free shipping methods instead. We will change to ship the Race Gates via DHL/ Fedex/ EMS no matter which method you choose. For the areas where DHL/ Fedex can not arrive, we will change to ship via EMS. If theres any special instruction, please let us know.Note: The additional velcro strap for you to fix the LED. ( LED not included)

    $99.98 $49.99, Save 50% OFF    1


    Weight: 1.50 kg

  • $8.99 $3.33, Save 63% OFF


    Weight: 0.10 kg

  • $8.99


    Weight: 0.20 kg

  • Frsky Receiver Antenna 150mm

    Frsky/Futaba receiver is two antenna with diversity function, only one better signal receiver antenna working at same time, pls note the antenna location: a. The two antennas must be kept as straight as possible. Otherwise it will reduce the effective range. b. The two antennas should be placed at 90 degrees to each other This is not a critical figure. But the most important thing is to keep the antennas away from each other as much as possible. c. The antennas must be kept away from conductive materials, such as metal and carbon by at least a half inch. The coaxial part of the antennas does not need to follow these guidelines, but do not bend it in a small radius. d. Keep the antennas away from the motor, ESC, and other noise sources as much as possible. - Antenna Length: 150mm - Connector type: Ipex connector - Frequency: 2.4Ghz - Color: Black- Quantity: 1pc- Compatibility: FrSky receiver, and all other 2.4Ghz receiver if with ipex connector for replacement

    $1.99 $1.75, Save $0.24 OFF


    Weight: 0.05 kg

  • FatShark Replacement Head Strap

    Head Strap for replacing your worn out, tired and smelly old head strap.Color: Black/ Blue / Grey (optional)Material: Nylon

    $5.90 $4.96, Save 16% OFF


    Weight: 0.10 kg

  • New Feiyu UAV Catapult Launcher for Fixed-wing Aircrafts

    The new Feiyu catapult luancher is used for launching small fixed wings that with the weight under 4.5kg. It is launched by manpower. Specifications:- Max. launching weight: 4.5kg- Unfolding length: 2.4m- Unfolding height: 0.9m- Folded length: 1.2m- Suitable for X5, X8, Skycam and other fixed-wing aircrafts- For professionals only.Note: Empty launching or launching with the weight under 2kg is NOT ALLOWED.

    $1,800.00 $1,710.00, Save 5% OFF 1


    Weight: 12.50 kg

  • HENGE 5v/6v/7.4v 8A UBEC 7V-25.5V Input 2-6 Lipo

    HENGE 8A UBEC is an external voltage stabilizer, it works at the Switch Mode. It can obtain the suitable DC voltage from 7‐25.5V input voltage for receivers and other device, and steadily provide 8A current to supply power for receiver, gyro, and multi servos. Therefore, the 8A UBEC is very suitable for large electric fixed wing aircraft and helicopters which uses 4S or more batteries. With this UBEC, you can obtain the power for receivers from dynamic power without equipping independent battery pack for receivers.Specifications:- Output voltage: 5V/8A , 6V/8A or 7.4V/8A(changeable with a jumper),Maximum output current: 12A(≤15S)- Input voltage: 7‐25.5V (2—6 cells Lipo battery pack or 6—16 cells NIMH battery pack)- Ripple: <35mVp‐p (@8A/12V)- Size: 45mm*22mm*7.5mm (L*W*H)- Weight: 16gFeatures: 1. Designed with an advanced switching power supply control chip with overcurrent and overheat protection function, the max efficiency of the chip is up to 93%;2. The small size and the light weight make it very convenient to use;3. Provide large output current, the continuous output current is 8A, and the burst output current is 12A, fully guarantee the power demand of equipment.;4. Designed with a high quality switching power supply conversion chip, significantly reduce the electromagnetic interference and ensure the receiver works properly;5. With ultra‐wide input voltage from 7V—25.5V (2—6 cells Lipo battery pack or 6—16 cells NIMH battery pack).



    Weight: 0.10 kg

  • AOK 5 In 1 Temperature Test Discharging Voltage 1-8S Batteries Display

    This product can not be independent of the use of high power discharge mode, need to cooperate with the AOK high power bulb discharge module use (the discharging module is not included). Please cooperate with 50W or 150W discharge module.Function: - 1~8S lithium batteries voltage test;- Lithium batteries low voltage audible and visual alarm (low voltage alarm value settable);- Digital measurement of temperature (value settable);- Digital temperature over-temperature alarm (value settable);- Can control Lithium batteries fast discharging by controlling big high power amplifier;- Battery capacity condition displayed with LED RGB tri colors;- Using two 110dB Buzzer alarms;- 0.36in high bright red digital tube display;- Anti-transposition plugging at both input and output;Package Includes:1x AOK 5in1 test module1x Connect cable1x User manual



    Weight: 0.10 kg

  • Replacement Standoffs 35mm for Multirotors 10pcs

    Show your own personality, these are replacement standoffs for mini multirotors, like ZMR180 and ZMR250 V2. They will give your multirotor individuality and style. 10pcs per set, available in black, blue, silver and yellow (optional).Specifications:Material: Aluminum alloyInner thread M3Length: 35mmOuter Diameter: 5mmColor: Black/Blue/Silver/Yellow/Red (optional)Quantity: 10pcs/set* The frame kit is not included.



    Weight: 0.10 kg

  • $5.69


    Weight: 0.10 kg

  • Matek PDB BEC-5V/3A LED Lighting Control Tracker Low Voltage Alarm LED & POWER HUB 5 in 1

    It is a 5in1 HUB with PDB (Power Distribution Board), BEC 3A 5V/12V Adj., LED Light Controller, Lost Plane Finder & Low Voltage Alarm functions. It is specially made for the Multi-Rotors, mini FPV Quad. Built-in 5V BEC can be connected to receiver or flight controller with Aux pins directly.Simplify wiring. If the battery is 4~6 cells LiPo, the BEC can be setted to 12V output, to power the Gimbals, Video Transmitters, etc.Inbuilt LED light controller, three flash modes can be chosen with the toggle switch of transmiter. And the buzzer can also be triggered with the toggle switch, which can help you find the models in tall grass or trees. the 5in1 also acts as a battery voltage monitor. Once voltage gets below the threshold that you set, the buzzer & LED light will remind you.



    Weight: 0.10 kg

  • Mini DC-DC 12V Voltage Step-down Regulator Module

    For a stable output of 12V, the input voltage requires 13.5V or more. When the voltage is under 13.2V, the output is 1.2V less than the input. The theoretical maximum output current is 3A. For a long term and stable use, it should be under 2A.  Here comes a brief instruction of ZMR250 V2 PDB soldering with this 12V Regulator for your reference. Download: ZMR250 V2 PDB Soldering with 12V Regulator.pdf.



    Weight: 0.01 kg

  • Silicon Wire AWG 12/14/16/18/20/22/24(1M) BLACK

    This silicone wire with pure copper pre-tinned for easy soldering and corrosion resistance. The highest grade of copper and pure silicone insulation provide maximum power and easy solderingColor : BlackLength: 1MeterType : 12AWG,14AWG ,16AWG ,18AWG,20AWG,22AWG,24AWG, 26AWG, 28AWG(optional)



    Weight: 0.05 kg

Find us on Google+ Watch us on Youtube Like us on Twitter Follow us on Facebook

Home   |   About Us   |   New Products   |   Multi-Rotors   |   FPV Airplanes   |   FPV Equipment   |   Battery / Chargers   |   Tools & Accessories   |   Contact Us   |   Blog   |  Site Map


Copyright © 2015 FPVMODEL.COM®. All Rights Reserved.