Sorted:
  • X-Racer X-1 V2 BNF with Two Batteries

    X-Racer X-1 Review by the RCAddictNote: Due to the air regulation, the batteries can only be shipped to following countries by E-packet:Canada, Australia, France, Germany, United Kingdom and United States. By Registered Airmail Shipping: Japan, Brazil and Russia.  If you are from other countries or areas, please help to choose DHL for shipping.Note: The BNF needs 1 to 3 days to test and assembly.The X-Racer X-1 micro racer is making a return with an all new with the F3 brushed flight controller. We are always listening to what our customers say and we have made some improvements accordingly. Now the new X-Racer X-1 F3 Fight Controller V2 comes with Frsky Rx and OSD Integrated.Agile, safe and fun. The X-Racer X-1 is an ultra-micro FPV drone designed for indoor flying in even the smallest of places. It is an amazing gift to both the first time pilot and advanced pilots.  We understand that some of you just want to fly and enjoy the race. So you can also just choose the BNF version and leave all the assembly & testing job to us. The BNF version is a fully assembled kit and it is fully tested before shipping. All firmwares are loaded and customers just need to bind with their Frsky transmitter and enjoy the flight.Main Features:1. Pre-flashed with the latest Betaflight firmware. (Its recommended not to re-flash with other firmware which might cause problems)2. Micro 5.8g 48ch Vtx. 3. FC is compatible with FrSky & SBUS, USB port ready.4. Micro FPV HD Camera.5. The case is available in various colors. (Blue, Gray, Yellow, Rose, optional )6. The BNF version is completely assembled that just need to bind with the Taranis then fly.7. No soldering or 3D printing required.Package Included in BNF Combo :X-Racer X-1 V2 Frame x 1X-Racer X-1 V2 Cover x 1 (Blue, Grey, Yellow, Rose, optional)Set of Flight Controller, Camera, TX and Antenna x 1 (Pre-soldered, Camera in PAL format)X-Racer HV 1S 250mah 3.8v 60C Hight Voltage Battery x 2 Dragonfly 7x16mm 14000KV Coreless Motor for X-Racer x 4 (2cw + 2ccw)X-Racer 31mm 4 Blade Clear Propellers x 8 (4cw + 4ccw)X-Racer X-1 USB charger x 1You might also like: HobbyTiger BC-1S06 Lipo 6 Port Battery Charger or 4 Ports 1S Lipo Charger With XT60 Plug

    $59.99 3

    SKU:X1FC

    Weight: 0.40 kg

  • New Multi-functional FPVmodel Motor Grip Pliers For RC Models

    Welcome to a world where changing props is not longer a painstaking difficulty, these are the newest version of Motor grip pliers from FPVMODEL. These light weight aluminum pliers may look simple but they are quite deceptive and feature a wide array of uses. These pliers are designed with a rubber strap to protect the beauty of your expensive motors while gripping the bell tightly to allow for quick and efficient prop nut removal. Say good bye to propellers biting into your hands while trying to hold the bell and prop while removing the prop nut...these pliers hold it for you. Ever had a hard to remove lens cap on your FPV camera? The end of the pliers offer another set of teeth in the end of one handle that is design to grip the lens cap housing and allow for simple removal.  FPVMODEL motor grip pliers also feature a built in wrench made especially for antenna removal. If your switches on your transmitter become loose in the field, no worries, these pliers have an adapter on the end made just for tightening your transmitter switches and keeping up with quick and simple maintenance. Overall, this simple yet effective tool is designed for a wide array of uses and can help eliminate several tools in your flight pack just by having this multi use tool at your disposal. These pliers are compatible with a variety of motors...2204,2205,2206,2207,1306,1406,and 1806. So as you can see your most commonly used motors in FPV are covered by this one multi-use design. Specs:Item Name: Motor Grip PliersMaximum opening: 45mmWeight: 57gPackage Included:1 Motor Grip Pliers2 sets of rubber tape

    $19.98

    SKU:FMPCU

    Weight: 0.10 kg

  • 2 Pairs 1935 5-Blade Propeller For Micro FPV Drone

    Size: 1.9 x 3.5Weight: 1.1gColor: Yellow, Blue optional

    $3.15 $0.95, Save 70% OFF

    SKU:DYSX1935

    Weight: 0.10 kg

  • DYS 3045 3 Inch 3 Blade Propeller Triblade Bullnose Prop 1 Pair

    Size: 3 x 4.5Weight: 2.72gColor: Green, Blue optional

    $1.38 $0.69, Save 50% OFF

    SKU:DYSX34

    Weight: 0.10 kg

  • DYS 3030 3 Blade Bullnose Nylon Fiber Propeller CW/CCW 1 Pair

    Material: Nylon + FiberSize: 3 x 3Hub inner diameter(ID): M5Hub thickness: 7mmWeight: 1.74gColor: Red, Orange optional

    $1.59 $0.64, Save 60% OFF

    SKU:DYSX30

    Weight: 0.10 kg

  • X-Racer 31mm 4 Blade Clear Propellers for Tiny Whoop and X-Racer X1

    *** Price for a set of 4pcs (2cw+2ccw)Description:- Item Name: Propeller- Usage: spare part for Tiny Whoop & X-Racer X1Includes:- 4pcs(2CW+2CCW) Propeller

    $3.99

    SKU:4M4BPC

    Weight: 0.05 kg

  • Dragonfly Transmitting SMA Female Antenna Extension Cables

    Dragonfly Transmitting SMA Female Antenna Extension Cables. A simple extension cable for better placement of your antenna.Specifications:- Connector: SMA Female- Cable Length: 45mm (cable only)

    $2.39 $1.20, Save 50% OFF

    SKU:DFTE

    Weight: 0.10 kg

  • Plastic Motor Screws Bumpers for Racing Quadcopter

    Designed to protect your motor while racing.  The motor will not be easily loose.Plastic Motor Screws Bumpers - Weight: 2g/pc- Material: Plastic

    $1.50 $0.75, Save 50% OFF

    SKU:PMPP

    Weight: 0.10 kg

  • BetaflightF3 Flight Controller

    BetaflightF3 Flight Controller | REVIEW AND HOW TO by Joshua BardwellBetaflightF3 is the flight controller designed to use every possible feature of Betaflight. More than the last half year has been spent in development. Boris B has worked with us to go over features and design aspects to help give us insight into what betaflight users want/need. This board features a 3A power draw giving users extra room for added attachments through uart ports. The six layer PCB is a more expensive design approach but was needed to give the ability to have a PDB that was capable of having wiring pads on both the top and bottom of the board. By using the six layer design we were able to increase the size of the pads and work around all the components all the while giving esc connections in the corners of the board rather than bunching all connections on either the top OR the bottom. Featuring a fully functioning OSD that can be configured in Betaflight this board will make configuring your OSD a breeze. The team at betaflight have been hard at work developing DSHOT and this board is also compatible with the latest release. But we didn’t stop there, this board also features a micro adapter to accept TF cards for those of you that like to follow up your flights with reviewing black box logging...we think we know of at least one guy that will like that. FeaturesIntegrated PDBBuilt in OSD customizable via Betaflight OSDCurrent sensorIntuitive layoutSD card slot for BlackBoxTailored to support BetaflightWhen running 8K/8K, CPU usage remains lowSpecificationsF3 ProcessorMPU6000 Gyro/ACC SensorBEC Max current 5V 2ABuilt in OSD – configurable via Betaflight GUISD Card adapter for BlackBoxCurrent sensorPower distribution board with six-layer PCBOSD Max Current: 145AWeights 8.6g***Note: Please do not connect to any equipment with the loading over 1.5A.Friendly Reminder: Choosing your power supply for video is relatively simple. Betaflight FC has two options, 5v and battery voltage. Choose your camera voltage by jumping RAM with either the 5V solder section or the Vbat solder section. (its recommended to use Vbat, Most cameras and Video transmitters can run off battery voltage) If using 5v it is recommeded to only power your camera and get the power for Vtx from another source. 

    $42.99 $29.66, Save 31% OFF 3

    SKU:BFF3

    Weight: 0.10 kg

  • Dragonfly 7x16mm 14000KV Coreless Motor for X-Racer X-1

    These are powerful 7mm motors that works great in X-Racer X-1 like micro racers. These motors come with plug and 8cm wire, they are better suited to FPV and will be the perfect upgrade for your Tiny conversion. If you are looking for punch and durability, you found it. Description:Motor Diameter: 7mmMotor Length: 16.5mmShaft Diameter: 0.8mmCable Length: 80mmWeight: about 3.2gOption: CW Motor(With Red Black wire), CCW Motor(With Black White wire)Quantity: 1pc / 4pcs(2CW+2CCW) optional

    $3.29

    SKU:DFCM

    Weight: 0.10 kg

  • Skywalker X2 Mini FPV Flying Wing EPO 950mm Wingspan RC Airplane ARF

    EMS latest notice:Due to the high season. Only the following countries can choose EMS shipping for plane orders: Hong Kong, Taiwan, Singapore, Philippines, Japan, Canada, Australia, France, South Korea, USA, Italy, Belgium, Spain, Russia, United Kingdom and Germany. For other countries, pls choose shipping methods such as DHL or Fedex. Thank you for your cooperation.Features:High density EPO material, strong resistance to fly, modular installation, make flying more simple, convnenient and fast.Large cabin, specialized device slot for battery,pre CCD, top mini camera, transmission etc.Using backward-push saber propeller, make flying safe and stable, performance is stronger, more efficient.Winglet can be quick released, there is ordinary and upgrade version, wooden winglet airlines use special plywood, high-speed flight more stable. Template design, installation is simple and fast, small size, easy to carry out.Description:Brand name: SkywalkerItem number: X2Wingspan: 950mmOverall Length: 650mmWing Loading: 39.4dm2 Flying Weight: 920-1200gMaterial: EPOMotor: 2216KV1400 MotorESC: 30A ESCPropeller: 7*5 propellerServo:2X 12g servoGravity Position: 150MM from the Aircraft noseNote: This is PNP version.

    $133.00

    SKU:SWX2

    Weight: 2.50 kg

  • MATEK Lost Model Beeper & FPV FC 5V Loud Buzzer

    MATEK Lost Model Beeper & FPV FC 5V Loud Buzzer can be used on triditional PWM receivers or FPV racing flight controller.The tiny buzzer is drived by on board MCU. It can output louder sound than 5V active buzzers.Features & Spec.:- Built-in MCU- Working voltage range: 4.5~5.2V DC- Power: 1W Max.- Sound Output: 90dB Max.- Size & Weight: 18x13x8mm, 2g

    $3.99

    SKU:DBUZ5V

    Weight: 0.10 kg

  • FrSky XJT SmartPort 16Ch Telemetry Transmitter Module

    The XJT telemetry transmitter module is compatible with the JR style modules.The latest upgrade to the FrSky Telemetry Radio System now features up to 16 channels and the new Smart Port for duplex communications with X series receivers. (Only certain transmitters are capable of sending 16 channels to the XJT.)The module is compatible with both the V8, D, LR and X Series (telemetry) receivers from FrSky.Add the XJT to the back of your FrSky Taranis transmitter for 32 channel in total!Features:- Advanced Continuous Channel Shifting Technology (ACCST SYSTEM) achieves highly reliable link in interference rich environments.- Smart Port - Full Duplex communication- Easy to bind and instant link-up- Excellent reboot times- All channels failsafe- Quick response- Very smooth servo movement- Alarm on events of receiver (low battery voltages, poor reception, etc.)- Error-free link, by using 48bits CRC algorithm- Firmware upgradableCompatibility:- V8 Series: (Non-Telemetry receivers)       V8FR-II, V8R7-II, V8R4-II, VD5M- D Series: (Telemetry receivers)      D8R, D8R-II, D8R-II Plus, D8RSP, D8R-XP, D6FR, D4FR, D4R-II, etc.- X Series: (Telemetry receivers)      X8R, X6R, X4R, etc.- LR Series: (Long Range receivers)     L9R- Compatible with the following transmitters:    Taranis - JR: 347, 388, 783, U8, PCM10, PCM10S, PCM10SX, PCM10IIS, 8103, J9303, MX-22, MX-24S, PX, 9XII, Eurgle 9X, Turnigy 9XSpecifications:- Operating Voltage Range: 6.0V-15.0V- Operating Current: 140mA (@6V), 80mA (@12V)- Output Power: ≤ 100mW

    $36.99 $33.99, Save $3.00 OFF

    SKU:XJT

    Weight: 0.20 kg

  • 6x15mm Coreless Motor for Blade Inductrix and Blade Nano QX (Speed: Fast)

    These are powerful motors that works great in the Blade Inductrix, Blade Nano QX, Blade CPX/S. These motors come with plug and 6cm wire, they are better suited to FPV and will be the perfect upgrade for your Tiny conversion. If you are looking for punch and durability, you found it. Warning: These motors are too power hungry for the stock packs! You need strong batteries to run these motors at full performance. Suggest use 205mah mylipo pack, and they will deliver a lot of punch and maximum runtime.Warning: Applies only to the original Nano QX, without FPV. These motors will turn your Nano QX into an insane jaw-dropping pocket rocket, but it will not like hovering! Depending on the battery you use, you will see varying degrees of oscillations (wobble) during hover and slow flight in SAFE mode. Agility mode does not have this problem.Specifications:Speed: 14.000KvOperating voltage: 1.5-3.7VMax. thrust: 15g (direct drive)1.0A load current at 3.7V (direct drive)Lifetime rating: 5-6 hoursPlug: Micro-JST-1.25Clockwise: red +, blue -Counter clockwise: white +, black -Warning: To maximize performance and life span, please do not run them in reverse! Wire colors are reversed.Dimensions:Motor diameter: 6mmMotor length: 15mmShaft Diameter: 0.8mmShaft Length: 4mmWeight: 1.8g Wire length: 60mmPlease note: wire color coding is reversed from the stock motors. Blade has decided to code their motors differently to everyone else in the industry. If you take off, and your Inductrix or Nano QX spins in circles and yaws like a micro frisbee on steriods, please note wire colors are reversed. Your motors are installed in the wrong spots.

    $2.19 $1.10, Save 50% OFF

    SKU:CL14M

    Weight: 0.10 kg

  • Stainless Steel RC Screw Kit, 720pcs/Kit

    This 304 stainless steel screw assortment kit help solve your repair, maintenance and model-making challenges. They provide a wide variety of sizes to minimize equipment down-time. This box contains the most often needed screws for your multirotor build. No more bent, rusted or corroded screws, our kits are made with the best 304 stainless steel money can buy.Features:1. Environmental Friendly2. Corrosion Resistant3. Anti-oxidation & Never rusted4. High Strength & HardnessContents:Round Head Screws ( 360pcs )50pcs – M3 x 12    60pcs – M3 x 1070pcs – M3 x 8      80pcs – M3 x 6 100pcs – M3 x 4 Flat Head Screws ( 360pcs )50pcs – M3 x 12    60pcs – M3 x 1070pcs – M3 x 8      80pcs – M3 x 6 100pcs – M3 x 4  

    $20.99 $18.47, Save 12% OFF

    SKU:RCSK-S

    Weight: 0.70 kg

  • Black Carbon Steel RC Screw Kit, 720pcs/Kit

    This screw assortment kit help solve your repair, maintenance and model-making challenges. They provide a wide variety of sizes to minimize equipment down-time. This box contains the most often needed special screws on your instrument. These 10.9 grade bolt is of high strength and durability.Contents:Round Head Screws ( 360pcs )50pcs – M3 x 12    60pcs – M3 x 1070pcs – M3 x 8      80pcs – M3 x 6 100pcs – M3 x 4 Flat Head Screws ( 360pcs )50pcs – M3 x 12    60pcs – M3 x 1070pcs – M3 x 8      80pcs – M3 x 6 100pcs – M3 x 4  

    $20.99 $16.50, Save $4.49 OFF

    SKU:RCSK-B

    Weight: 0.70 kg

  • 125pcs Black Heat Shrink Tubing Kit

    Features:- Professional, fast, and secure way to wrap wire harnesses- Shrinks to half its diameter- Set contains 8 popular sizes- Case includedContents:5 pcs - Φ14 x 100mm10 pcs - Φ10 x 60mm10 pcs - Φ8 x 60mm8 pcs - Φ6 x 60mm12 pcs - Φ5 x 30mm15 pcs - Φ4 x 60mm20 pcs - Φ3 x 60mm45 pcs - Φ2 x 30mm

    $4.39 $3.86, Save 12% OFF

    SKU:HSTK

    Weight: 0.20 kg

  • Skywalker WALL-E2000 2030mm UAV ARF Version

    EMS latest notice:Due to the high season. Only the following countries can choose EMS shipping for plane orders: Hong Kong, Taiwan, Singapore, Philippines, Japan, Canada, Australia, France, South Korea, USA, Italy, Belgium, Spain, Russia, United Kingdom and Germany. For other countries, pls choose shipping methods such as DHL or Fedex. Thank you for your cooperation.WALL-E 2000Flying UAVs and FPV there is three major requirements range, flexibility and reliability. Skywalker has done their homework and brought to you the WALL-E2000. Beauty is the eye of the beholder and the WAll-E2000 is a beast, With an enormous 2030mm wingspan and EPO construction and looks only a mother could love.Designed for long range FPV and UAV operations its powerful twin motor design will give the pilot added thrust and reliability, twin motors give you longer flying times and a smoother flight. The WALL-E2000 has 3 large cavernous compartments to house your flight batteries, electronic avionics, recording devices and keep them apart to reduce electronic noise or disturbance. With a battery bay the size of a small country this gives you the opportunity to fly with up to 16000maH 6S LiPoly battery giving you super long flight times to cover large volumes of adventures sky.FPV flight is rising in popularity its your time enjoy the freedom of flight and be the champion of the hobby with the WALL-E2000.Specifications:Motor: 2815KV 650*2pcsWing span:  2030mm Propeller: (9*6/10*6 )*2pcsFuselage length: 1120mm Servo: 12g*4pcsWing area: 48dm^2Flying weight: 2500g-3000gBattery: 5S-6S 10000-16000mahC.G.: 80-85mm behind the leading edgeTakeoff: Hand cast, catapult shot Landing: Parachute landing Air speed: 60-80km/h Maximum of flying time: 60-120min Maximum of flight level: 6000mARF Included:Skywalker WALL-E2000 almost ready to fly kit2 x 2815 650kv brushless outrunner motors2 x 40A electronic speed controllers1 x 6-8A UBEC4 x 12g servos2 x 10x6x3 propellerAll included hardware1 x Instruction manualRequired:Minimum 5ch transmitter and receiverLiPoly battery 10000-16000mAh 5-6SFPV equipmentGlues and related building tools1 x Sense of adventureNote: Before purchasing: Please take a note that the items included in the ARF might be a bit different from above list due to made in different batches, and some specifications might be changed as well.

    $316.00 $249.90, Save $66.10 OFF

    SKU:SW2000-WEP

    Weight: 6.60 kg

  • Skywalker EVE-2000 2240mm Wingspan FPV RC Airplane

    EMS latest notice: Due to the high season. Only the following areas can choose EMS shipping for plane orders: Hong Kong, Taiwan, Singapore, Philippines, Japan, Canada, Australia, France, South Korea, USA, Italy, Belgium, Spain, Russia, United Kingdom and Germany. For other countries, pls choose shipping methods such as DHL or Fedex. Thank you for your cooperation.EVE 2000It is Skywalker’s latest masterpiece that acts as long-rang cruise professional aerial survey aircraft.Not surprisingly, it is called “Aerial Carrier”.The players can modify cabin space at their will which can place IPAD 3 directly. With aggressive outlines and the most reasonable aerodynamic performance design, it has been a continuation of strong wind cooling design to keep the best working state. It is equipped with strong double front engines that can control aerial vehicle flexibly.Through a large number of optimization design and repeated flying testing, it can complete high quality flying, aerial shots and aerial mission in complex environment with real-time dynamic control system on the fuselage.Specifications:Motor: 2816 KV510*2pcsWing span:  2240mm Propeller: (9*6/10*6 )*2pcsFuselage length: 1270mm Servo: 12g*4pcsWing area: 49dm^2Flying weight: 3800g-4600gBattery: 5S-6S 10000-16000mahC.G.: 80-85mm behind the leading edgeTakeoff:  Hand cast, catapult shot Landing: Parachute landingFlight time: Depending on your paticular flying style.Air speed: 60-80km/h Maximum of flight level: 6000mBefore Purchasing: The motors, ESCs and servos are not included in the option "Frame Kit".Note: Before purchasing: Please take a note that the items included in the ARF might be a bit different from above list due to made in different batches, and some specifications might be changed as well.

    $268.69 $229.99, Save $38.70 OFF

    SKU:SW2000

    Weight: 6.00 kg

  • Multi Color 6061 Aluminum Alloy M3*35mm Knurled standoff 10pcs

    Specification:- Size: M3*35- Color: Optional- Material: 6061 aluminum alloy- Pack: 10pcs- Weight: 12g ( 10pcs )Features:Much lighter but stronger and more durable. Multiple colors available for your choice. Please take note that due to the hardness, please do not lock the nuts forcibly. 6061 Alloy main alloying elements are magnesium and silicon to form Mg2Si phase. Fadeless and anti-static electricity.GB/ pass RoHS Surface treatment : AnodizingNote: The different batches may have a slight color difference.

    $6.99 $2.94, Save 58% OFF 1

    SKU:AM335

    Weight: 0.10 kg

Find us on Google+ Watch us on Youtube Like us on Twitter Follow us on Facebook

Home   |   About Us   |   New Products   |   Multi-Rotors   |   FPV Airplanes   |   FPV Equipment   |   Battery / Chargers   |   Tools & Accessories   |   Contact Us   |   Blog   |  Site Map

Product Tags: ABCDEFGHIJKLMNOPQRSTUVWXYZ0-9

Copyright © 2015 FPVMODEL.COM®. All Rights Reserved.