Sorted:
  • X-Racer X-1 F3 Flight Controller V2 with Frsky Rx and OSD Integrated

    The X-Racer X-1 Whoop flight controller is making a return with an all new update. We are always listening to what our customers say and we have made some improvements accordingly. In reality, this is not just a simple whoop flight controller that was designed by us but its more of an FC that has been re-designed by users like you.This micro whoop brushed F3 flight controller was designed for X-Racer X-1, but it also can be used on those micro quadcopters like Tiny Whoop and Blade Inductrix.Features:1. The RX connection protocol has been upgraded from PPM to SBUS. With the SBUS protocol, you are able to get a faster response when the micro racer turn around.2. The integrated OSD (on screen display) is able to show some important flight data on your FPV feed, including battery voltage, current draw etc. You can even use it as a menu to change your quad’s PID, rates, filters and others.3. Larger MOS ensures a smoother flying with your micro racer. 4. The DC regulator module has been upgraded for a better loading capacity.5. Compatible with FrSky & SBUS, USB port ready.6. Pre-flashed with the latest Betaflight firmware.7. The binding buttons for the built-in Frsky RX have been updated, more convenient to use.How to Bind Built-in FrSky RX.1. Press "Band" to power on the quad, the middle red LED will turn on.2. Turn on your FrSky transmitter, set the mode to D8, 1-16CH, and then start to bind.3. After successfuly binding, on the right corner the red LED will start to slowly flash.4. Re-power on the flight controller, the binding is completed.How to Bind other RX.1. Connect the FC to Betaflight.2. Enter following instruction in CLI: set sbus_invention = on. And then save.3. The UART needs to choose 3.(Please take a note that the FC automatically works with the built-in FrSky RX, if you want to use with other RX, please set the CLI before using.)

    $29.99 $20.99, Save 30% OFF

    SKU:XR1FCU2

    Weight: 0.10 kg

  • Emax F3 Magnum Mini Tower System Bullet 12A 4 in 1 ESC And F3 Flight Controller

    EMAX “F3 MAGNUM MINI” FPV TOWER SYSTEM Designed for high performance Micro FPV racers, the F3 Magnum Mini packs in a F3 processor, Betaflight OSD and 12A 4 in 1 ESC that can handle up to 4s batteries. MPU6000 gyro is a proven performer for stable flight and resistance to vibration noise.The FC and ESC with neatly stack together with pinned interconnects that make your build easy to assemble and cleaner looking. This tightly pre-assembled package will fit any frame that has 20 x 20mm mounting hole spacing. The F3 Magnum Mini is the fastest way go from starting a new micro build to FPV Flight!4 in 1 Main Board - F3 FC + Betaflight OSD + 5v Regulator + Buzzer  The heart of the flight control systems is a powerful STM32F303 MCU and MPU6000 gyro flashed with Betaflight for proven rocksteady flight stability. The integrated 5v/3A voltage regulator means clean power for all the FC/OSD components and other attached boards such as VTX, RX and FPV Camera. Betaflight OSD with easily customizable layout of vital flight information and ability to change FC flight parameters. On board buzzer for battery level warning or lost model finder functions.

    $45.99 $42.99, Save $3.00 OFF

    SKU:EMF3MT

    Weight: 0.15 kg

  • Wraith32 MINI V2 32bit BLHELI_32 35A ESC

    The Wraith32 Mini V2 35A ESC is an upgraded version of previous Wraith32 Mini 25A. Comparing to the first version, the Wraith32 Mini V2 has more capacitors to help smooth noisy environment, and the data transmission interface is placed outside.Specifications:2-6s LIPO input35A designed10*20mmBLHeli_32 is the third generation BLHeli code, following base BLHeli and BLHeli_S.BLHeli_32 runs on an ARM 32bit MCU, initially it will be on a Cortex-M0 running at 48MHz, but there are MCUs out there that can run a lot faster.So what can the increased MCU speed do?First of all, it can run input signals with lower latency at faster rates. Dshot up to at least Dshot1200, and at rates up to at least 32kHz is now supported.Secondly it allows packing of more functionality. - Like programmable pwm frequency, up to 48kHz, that can run motors even smoother, and also allows for moving of small but potentially disturbing humps in the throttle response. All ESCs have these bumps, with BLHeli_32 they can now be moved in the rpm range, to a place where the system has low sensitivity to them.- Like auto timing. Which is not the option to choose if you’re after max power. But if you want the most efficient running with very good robustness against desync, it is the perfect choice.- Like voltage and current limiting. Which is implemented in the code, and will be supported on some ESCs. Voltage limiting is desirable for fixed wing crafts. And current limiting adds protection against ESC failure.- Like programmable brake on stop force. Which allows control of the braking of fixed wing props.- Like improved direction change in bidirectional mode.- Like more to come in the future. Such as setup from the FC by using Dshot commands. Such as telemetry functionality. There is room to grow performance and functionality.Some Tips:BLHeli_32 ESC Firmware OverviewWhat is Dshot1200 and Why Dshot1200 is Better?How to Get Dshot1200 Running in Betaflight?Downloads:Download the latest BLHeli_32 Configurator here.Download the BLHeli_32 User Manual here.Download Pre-release version of Betaflight 3.2.0 here.

    $16.99

    SKU:W32MV2

    Weight: 0.10 kg

  • BetaflightF4 Flight Controller

    BetaflightF4 How to ESC Telemetry, Smart Port Audio, Smart Port TelemetryFriendly Reminder: Upon receiving your FC, please connect to USB and calibrate before continuing to build and solder to it.  BetaflightF4 is the follow up design to the very popular BetaflightF3. Following in the same path as Betaflight F3 we have kept a very similar footprint in terms of design with a few added modifications. The F405 has replaced the F303 to allow for lower CPU loads.We have eliminated the 5v/3.3v jumper and added two seperate connection points, one for sbus and one for spektrum users. The jumper still remains for the battery voltage/5v connection for connecting your camera. While wiring the board it is recommended to get power for your vtx either from a different 5v source on the board or if using a higher voltage vtx power it from the battery input coming into the pdb. Running ground loop at Agnd with gnd wires from camera and vtx is still recommended to give the cleanest video signal. Another small design change to this board was changing the BEC, this change takes the recommended 5v 2A current limit and drops it down to 5V 1.5A, its a small change but one that we opted for in order to use a more reliable BEC.BetaflightF4 now comes with telemtry pads for BLHeli32 ESCs these pads are located between the signal and gnd pads for the ESC connections.FeaturesIntegrated PDBBuilt in OSD customizable via Betaflight OSDCurrent sensorIntuitive layoutFlash memory for blackboxTailored to support BetaflightWhen running 8K/8K, CPU usage remains lowSpecificationsF405 ProcessorMPU6000 Gyro/ACC SensorBEC Max current 5V 1.5ABuilt in OSD – configurable via Betaflight GUICurrent sensorPower distribution board with six-layer PCBOSD Max Current: 145AWiring Diagram - Click to enlarge!BetaflightF4 Connection Plan by Phillip SeidelBetaflightF4 Turtle Mode SettingBetaflightF4 OSD FlashingHow to Use ESC TelemetryBetaflightF4 Can not ArmHow to Use Smart Port TelemetryHow to Use BetaflightF4 IBUSThe Number of “Scale the Output Voltage to Miliamp” in BetaflightHow to Set Tramp HV VTXIf you are meeting a problem with the use of flight controller and can not find the answer, please submit your question.

    $44.99 $35.99, Save 20% OFF 3

    SKU:BFF4

    Weight: 0.10 kg

  • OMNIBUS AIO F7 V2 Flight Controller

    Features:- F7 MCU - faster than the current F3 and F4 processors- Two gyros on the flight controller: an MPU6000 for sampling up to 8khz and ICM20608 for sampling up to 32khz- Built in betaflight OSD- 36x36mm, mount holes 30.5x30.5mm- SD card reader for recording black box data (SD card not included)- Supports 2-4s natively, 5-6s with 220uf 35V capacitor- 5v/1A regulator- Port for easy connection to Airbot 4-in-1 esc (SH1.0 8P)

    $55.00

    SKU:OF7V2

    Weight: 0.10 kg

  • BattleRC 60mm Micro 5.8G FPV VTX Linear Antenna Ipex 3pcs

    Specifications:Frequency: 5.7~5.9Ghz VSWR:  ≤2.5 @5700 MHz ~5900 MHzGain definition: 2dBi ( *Typical* )Band definition: 4900 MHz ~5900 MHzImpedance definition: 50 ohmSignal transmission directionality: High Gain omnidirectional antennaConnector type: Ipex connector Antenna Length: 60MM

    $12.50 $11.38, Save 9% OFF

    SKU:3RG178

    Weight: 0.28 kg

  • BattleRC Micro 5.8G FPV VTX Antenna 60mm 3pcs

    Electrical Specifications:Frequency Range (MHz): 5100-5150/5750-5800Bandwidth (MHz): 50/50Input Impendence (Ω): 50V.S.W.R: ≤1.5Gain (dBi): 2.0Polarization Type: Vertical polarizationLightning Protection: DC groundingPower Capacity (w): 50Mechanical Specifications:Antenna Length (mm): 60MM±1MMRadiator: CuprumConnect Type: WeldingWorking Temp(℃): -40~60Storage Temperature(℃): -20~40Weight (g) :0.5±1

    $12.50 $7.50, Save 40% OFF

    SKU:3FMQA

    Weight: 0.10 kg

  • Betaflight 32Bit 35A 2-6S BLHeli_32 ESC Dshot1200

    *** This is the new updated version of Betaflight BLHeli_32 ESC that comes with a line of soldering along the ESC sides for a better protection and giving more power. We are at it again and the guys at Betaflight, FPV Model, BLHeli, and Airbot have come together to create a version of BLHeli_32 ESCs that FPV Model hopes will not disappoint. Introducing a fresh take on an ongoing development with BLHeli_32 we are introducing BetaBees, BlHeli_32 ESCs designed in conjunction with Airbot.BLHeli_32 is the third generation BLHeli code, following base BLHeli and BLHeli_S. It runs on an ARM 32bit MCU, initially it will be on a Cortex-M0 running at 48MHz, but there are MCUs out there that can run a lot faster.  BLheli_32 can run input signals with lower latency at faster rates. Dshot up to at least Dshot1200, and at rates up to at least 32kHz is now supported.Here is what BLHELI_32 has to say about their new "Power to perform":Programmable PWM frequency of up to 48KHzAuto-timing for higher efficiency and reliabilityVoltage/Current limitingAdjustable “Brake on Stop” forceImprove direction change in Bidirectional modeESC TelemetryConfiguring from FC using DShot commandsFeatures: Built in Current SensorExtra capacitors to help smooth noisy envrionments.Customizable color choice RGB LED using Blheli_32 software.Large positive and ground pads for easy soldering. 2-6s Lipo input35A continuous current  (can handle burst above 45A but please be reasonable, do not overwork  your motors)TX pad on ESC used for Telemetry pad. (connect to FC and you would get current sensing, motor RPM, ESC temperature etc)Specifications :Input: 2-6s LiPolyConstant: 35 AmpsBurst: 45 AmpsBEC: No BEC, OPTO onlyDimensions: 34x16x7mmWeight: 6g (without motor wires)Includes:1 x Betaflight BLHeli_32 35A ESC1 x 16AWG Red Silicon Wire 10cm1 x 16AWG Black Silicon Wire 10cm3 x 20AWG Black Silicon Wire 10cm1 x 26AWG Red Silicon Wire 10cmSome Tips:BLHeli_32 ESC Firmware OverviewHow to Connect BLHeli_32 ESC to Congigurator BLHelisuite32 via FC PassthroughWhat is Dshot1200 and Why Dshot1200 is Better?How to Get Dshot1200 Running in Betaflight?Downloads:Download the latest BLHeli_32 Configurator here.Download the BLHeli_32 User Manual here.Download Betaflight 3.2.0 here.We have made a slight change to the second version of Betaflight 32bit BLHeli ESC. The soldering of previous version already connected while the new version not, so as to make the wiring cleaner.

    $18.99-$67.99 1

    SKU:BFESC3

    Weight: 0.10 kg

  • OMNIBUS F4 Nano v3 with LC filter

    - A new generation AIO Flight control for FPV, based on F405 MCU, using F4 MCU controls OSD over SPI bus in DMA mode, OSD Configation has been incl. in Betaflight GUI.- Supports SD Card and LIPO direct input (2-6S)- MPU6000 at SPI bus. No Flash for blackbox functionFeatures:STM32 F405 MCU, Runs Betaflight 3.2 firmwareSBUS/PPM input (Pinheaders)4PWM output (1-4Pinheaders and Sh1.0 Plug)Only 25x25mm, mount holes 20x20mmIncl. Barometer BMP280SPI Sensor MPU60002-6S Lipo Direct poweron board LC filterUpdate on August 14th: Add a connecting cable.

    $35.99

    SKU:OBF4V3

    Weight: 0.10 kg

  • BrotherHobby Tornado T2 2206 2600kv Brushless Motor for FPV Multicopters

    Brotherhobby has created these 2206 T2 series of motors with a unique design. The bell design has a new look, the body is made of solid 7075 aluminum, and the motor itself features 1.75mm thick N52H arc magnets. All while only weighing about 31g. With these magnets you dont need to sacrifice structural integrity for low weight, you can have both.  Great response time and power.SpecificationsConfiguration:12N14PNo.of Cells(Lipo): 3-5SRotor: 1.75mm N52H arc magnetsWire AWG: 20AWGWiring config Single-stranded: 1 x 0.55mm Delta DLRKStator: 0.15mm Nippon Steel silicon steelBearings: Japanese NSKBase casing: Al 7075Bell cap: Al 7075Weight: 30.8G

    $23.99 $21.83, Save 9% OFF

    SKU:T2-2206

    Weight: 0.10 kg

  • RaceFlight Bolt 4n1 ESC

    The RaceFlight Bolt 4n1 electronic speed controller (ESC) provides the power of BlHeli_S performance in a slim package. This makes your electronic stack slim, and generally eliminates the need for an additional PDB. The 4n1 ESC performs great and helps clean up any build.The RaceFlight 4n1 is also extremely easy to install. It is compatible with 4s through 6s batteries and has a built-in current sensor that hooks up directly to the Revolt to provide mAh information. The whole 4n1 ESC pins directly to the Revolt flight controllers and also sends voltage.Specifications30.5mm x 30.5mm mounting hole spacing30 amp continuous draw per motor40 amp burstBlHeli_S5V voltage regulator capable of 3A continuous outputD-Shot ready4s – 6s compatibleBuilt in Current SensorPins to Flight controllerCurrent and Voltage sent to flight controllerEasy InstallHigh-quality components

    $64.99 $49.90, Save $15.09 OFF

    SKU:RFB41E

    Weight: 0.10 kg

  • EZlap Timing System

    X-Racer X-1 Racing with EZlap Timing System The EZlap timing system is a race management system that specially designed for both indoor and outdoor small scale drone racing. This new FPV race tracker allows 4 pilots to race at once. The EZlap timing system comes with a master controller, 3 infrared receiver modules, 8 transmitters. The system is powered by a PC or laptop via a USB cable connecting to the USB port of master controller. It is easy to install, simply mount the master controller and receiver modules in the racing gate, install the transmitters in the racing drones, then install the free RCM Beginner software (can be downloaded at the bottom of this page) in your computer and connect with the provided USB cable, you and your friends will be able to start the racing just in a minute.The master controller sends the signals that received from the infrared receiver modules to the computer after processing.The infrared transmitter is 0.4g only, it will not increase any weight to the racing drone since it is so light in weight. It has 8 different address codes which are switchable via the 3-digit DIP switch. Start to send the address codes after powering on via USB.The infrared receiver modules receive the address codes from the transmitters and send them to master controller.Although the Ezlap Timer was originally designed for small scale micro drone race, it was used for 210/250 class FPV race at Liberty Multirotor Racing 2017 and  a great success. The Liberty Multirotor Racing 2017 was held by Romanian Aeromodelling Association.  Liberty Multirotor Racing 2017. Video from Ali Green, winner of the race.Connection and Use:The master controller is powered by the USB after connecting to the PC. No extra power supplies required.The receiver modules and master controller are connected with three special made 6-pin plug cables. In the EZlap timing kit there are 4 receiver modules (including the master controller) included. But how many modules you need depending on your track width and the height of your bridge. The quantity of receiver modules is also limited by the USB loading capacity.The infrared transmitter is powered by the built-in button cell battery.Connect the master controller to the PC with the provided USB cable, access to the free RCM Beginners software and set the pilots information.Package Inlcuded:Master controller x 1 (similar to receiver module but with a USB port)Receiver module x 3 Transmitter for racing quad x 816cm 6-pin plug camble x 33m long USB cable x 1Downloads:RCM Beginners (Free Software)RCM Beginners User ManualThe master controller is powered by the USB after connecting to the PC. No extra power supplies required. It sends the signals that received from the receiver modules to the RCM Beginners software after processing.The receiver modules are connected by 6-pin plug cables. They receive the address codes from the transmitters and send them to master controller.The infrared transmitter is 0.4g only, it will not increase any weight to the racing quad since it is so light in weight . It has 8 different address codes which are switchable via the 3-digit DIP switch. Start to send the address codes after powering on via USB.Three 16cm 6-pin plug cables are included to connect the receiver modules and master controller.The 3m USB cable is used for connecting the master controller to the PC. All the parts included in the EZlap timing system.Management interface of RCM Beginners.The EZlap timing system is working during the racing.

    $49.99

    SKU:FCTR

    Weight: 0.25 kg

  • Dragonfly Low Profile Micro FPV Camera

    This is the micro FPV camera that we are using on the hot selling X-Racer X-1. Using this high quality micro FPV camera, we have saved some much needed space for this design and we are able to place the camera in a low profile position between the two forward motors allowing for a design that does not require the video system being mounted in a high profile top mount of the aircraft.Specifications:CCD 1/4 CmosSignal System PAL NTSCPixel P:720H×576 N:720×487Photosensitive area 1/4:4.077mm x 3.136mm Scanning frequency H:15.625KHz V:50Hz H:15.7343KHz V:60HzHorizontal clarity 800 TV LinesShutter Speed 1/50-1/100000(秒) 1/60-1/100000(秒)Min. Illumination 0.1 Lux / F1.2S/N radio ≥48dB(AGC OFF)Grayscale 10Gamma value 0.45Black level 0.06 Vp-pVideo output 1.0Vp-p 75ΩPower Requirement DC3.3-5VWorking Temperature -20℃~50℃ RH95% MaxPower Consumption 90MAWeight: 2g

    $14.99

    SKU:FXRMC

    Weight: 0.10 kg

  • Dragonfly 25mw 48CH Micro VTX For X-Racer X-1 and KL-EX90

    FPVModel did not stop at the flight controller design. We have also designed a Drgonfly 25mw 48ch Vtx to mount flushly on top of the FC and give and even more aero dynamic low profile design for the video transmission. By using this low profile design were able to streamline the body of the X-Racer X-1 and allow for smooth airflow over the low slung canopy, allowing for smooth airflow over the top of the frame.

    $15.99 $13.59, Save 15% OFF

    SKU:GFVX1

    Weight: 0.10 kg

  • Flycolor RAPTOR S-Tower 12A BLHeli-S 2-3S ESC with F3 Flight Controller Built-in OSD

    Specification:Brand name: FlycolorItem name: 12A BLHeli-S 2-3S ESC with F3 Flight ControllerFirmware: BLHeli-SContinuous Current: 12ABurst Current: 15AInput Voltage: 2 – 3SSize: 30.5*33.4*19mmBEC: 5V/1A (F.C)Weight: 11.5gFeature:- EFM8BB21F16G MCU with 50 MHz maximum operating frequency. using dedicated 3in1 drivers, makes the start more smooth. ESC maximum speed is limited to 500k eRPM.- Small size&lighter in weight. More suitable for ultra small multirotors.- Two layers tower structure between 4in1 ESC and FC using quick pin connection. makes the installation faster and more convenient- Exposed pads for Battery and Motor wires, fast welding without additional disassembly, motor replacement is more convenient .- F3 flight controller, supports PPM and SBUS remote control / receiving mode.- FC integrated OSD, no external OSD device is required, integrated 5V/1A for Image transmitter, camera, buzzer, LED and other peripheral devices ;- BLHeli-S firmware designed for superior performance in multirotors, and uses hardware generated motor pwm for smooth throttle response and silent operation.- There are tuneable parameters that can make the code run well even in the most demanding situations, although default settings will work excellently in normal operating environments.- The code supports regular 1-2ms pulse width input, as well as Oneshot125 , Oneshot42 and Multishot . The input signal is automatically detected by the ESC upon power up.- Supports Dshot digital signal, anti-interference ability is stronger, and do not need throttle calibration.

    $58.99

    SKU:FCRST

    Weight: 0.10 kg

  • GemFan 2035BN 4-Blade Propellers Purple / CCW + CW

    These fantastic Gemfan 2035BN 4 blade propellers are almost unbreakable, extremely smooth and guaranteed to exceed your expectations.Specification- Type : Micro Class Multi-Rotor- Length : 2"- Pitch : 3.5"- Weight : 0.7 g - Mounting hole : 1.5mm Motor Shaft or T-type mount, Two Holes (eye to eye 5mm)- Hub : 5mm- Included : 2pcs CW and 2pcs CCW in a bag

    $3.00

    SKU:GF2035

    Weight: 0.10 kg

  • X-Racer Quadrant 2-6S 25A 32Bit BLHeli_32 ESC Dshot1200

    Features of New X-Racer Quadrant 25A 2-6S 32Bit BLHeli_32 ESC:Uses the latest BLHeli_32 firmware. Dshot up to at least Dshot1200.At rates up to at least 32kHz is supported.Four tiny ESCs can be installed separately on the arms, or installed together like a PCB under the flight controller.2-6s Lipo input.With 25AMp constant RMS, 30A max.Less than 3 grams each piece and about 11.5 grams for a set of 4 pieces.Small in size: 18 x 24mmCompatible to BetaflightF3 Flight ControllerThe new X-Racer Quadrant BLHeli_32 ESC has followed the design of previous 4-in-1 design of X-Racer Quadrant. It is not a single board, but four tiny ESCs can be installed separetely on the arms, or installed together like a PCB under the flight controller. This is the 25A version, there is also another 35A version available for your choice.The new X-Racer Quadrant 25A is flashed with the latest BLHeli_32 program. Dshot up to at least Dshot1200, and at rates up to at least 32kHz is now supported.BLHeli_32 is the 3rd generation of BLHeli firmware after BLHeli and BLHeli_S. BLHeli_32 runs on an ARM 32bit MCU, initially it will be on a Cortex-M0 running at 48MHz, but there are MCUs out there that can run a lot faster.So what can the increased MCU speed do?First of all, it can run input signals with lower latency at faster rates. Dshot up to at least Dshot1200, and at rates up to at least 32kHz is now supported.Secondly it allows packing of more functionality. - Like programmable pwm frequency, up to 48kHz, that can run motors even smoother, and also allows for moving of small but potentially disturbing humps in the throttle response. All ESCs have these bumps, with BLHeli_32 they can now be moved in the rpm range, to a place where the system has low sensitivity to them.- Like auto timing. Which is not the option to choose if you’re after max power. But if you want the most efficient running with very good robustness against desync, it is the perfect choice.- Like voltage and current limiting. Which is implemented in the code, and will be supported on some ESCs. Voltage limiting is desirable for fixed wing crafts. And current limiting adds protection against ESC failure.- Like programmable brake on stop force. Which allows control of the braking of fixed wing props.- Like improved direction change in bidirectional mode.- Like more to come in the future. Such as setup from the FC by using Dshot commands. Such as telemetry functionality. There is room to grow performance and functionality.Some Tips:BLHeli_32 ESC Firmware OverviewWhat is Dshot1200 and Why Dshot1200 is Better?How to Get Dshot1200 Running in Betaflight?Downloads:Download the latest BLHeli_32 Configurator here.Download the BLHeli_32 User Manual here.Download Betaflight 3.2.0 here.

    $18.00-$41.68 1

    SKU:XQ25B32

    Weight: 0.10 kg

  • Matek FCHUB-6S W/ CURRENT SENSOR 184A BEC 5V & 10V

    The Matek FCHUB-6S PDB distributes power from a 3~6S LiPo pack to 4 ESCs, as well as providing regulated & filtered DC 5V & DC 10V outputs for powering Cameras, RC receiver, Flight Controllers, Video Transmitters, LEDs, etc. It also has built-in 184A current Sensor, and offers a FFC socket to connect the MATEKSYS Flight Controller conveniently.Features:Total 4 pairs ESC solder tabs are fit for X type frameMax.27V input w/ TVS protectionBuilt-in current sensor 184APDB: 4*30A (4*46A, 5 seconds), 4layers*2oz copper PCBBEC 5V/1.5A(2A Max) w/ 100uF panasonic POSCAP filterBEC 10V/1.5A(2A Max.) w/ 47uF TDK MLCC filter5V & 10V Output LED indicators & Short circuit tolerant

    $9.60

    SKU:FCHUB-6S

    Weight: 0.10 kg

  • HobbyTiger BC-1S06 Lipo 6 Port Battery Charger Balance Quick

    An 1s lipo for the micro racers like X-Racer X-1 and Tiny Whoop only last for 3 to 5 minutes during the flying. It would be better if you have several extra batteries ready. But for an ordinary USB charger, it is just able to charge one lipo each time. With the HobbyTiger BC-1S06, we are now able to charge 6 1s lipos at once.Description:Item name: 6 Port Battery Balance ChargerInput voltage: DC 7-30V (12V/4A recommended)Cutoff voltage: 4.16V-4.24V per cellUSB output: 5V/3ACharge current: 6*500mADimension: 80x50x20mmLighting: chargingExtinguished: completedFlashing: no battery Features:Support 6 X 1s Li-po batteries charging at the same time.High charging efficiencyEnergy saving and environment protecting.Suitable for both charging outside or at home

    $24.99 $12.99, Save $12.00 OFF

    SKU:PABCC

    Weight: 0.30 kg

  • Replacement Kit of Frame, Cover, Props and Motors for X-Racer X-1 V2

    This is the accessories package for X-Racer X-1 V2 and DIY purpose.  Including the cover, frame, props and motors.

    $15.99

    SKU:X1FC4

    Weight: 0.25 kg

Find us on Google+ Watch us on Youtube Like us on Twitter Follow us on Facebook

Home   |   About Us   |   New Products   |   Multi-Rotors   |   FPV Airplanes   |   FPV Equipment   |   Battery / Chargers   |   Tools & Accessories   |   Contact Us   |   Blog   |  Site Map

Product Tags: ABCDEFGHIJKLMNOPQRSTUVWXYZ0-9

Copyright © 2015 FPVMODEL.COM®. All Rights Reserved.