Sorted:
  • BrotherHobby Tornado T2 2206 2600kv Brushless Motor for FPV Multicopters

    Brotherhobby has created these 2206 T2 series of motors with a unique design. The bell design has a new look, the body is made of solid 7075 aluminum, and the motor itself features 1.75mm thick N52H arc magnets. All while only weighing about 31g. With these magnets you dont need to sacrifice structural integrity for low weight, you can have both.  Great response time and power.SpecificationsConfiguration:12N14PNo.of Cells(Lipo): 3-5SRotor: 1.75mm N52H arc magnetsWire AWG: 20AWGWiring config Single-stranded: 1 x 0.55mm Delta DLRKStator: 0.15mm Nippon Steel silicon steelBearings: Japanese NSKBase casing: Al 7075Bell cap: Al 7075Weight: 30.8G

    $23.99 $21.83, Save 9% OFF

    SKU:T2-2206

    Weight: 0.10 kg

  • MFDlink / Rlink 433MHz Long Range UHF 8CH SBUS RX

    MFDLINK / Rlink 433MHz Long Range UHF 8CH SBUS RX. Specifications:8CH standard channel, can be extended to 16chDimension: 45*30*6mmWeight: 16gWork Voltage: 4-6VWork Current: 75mA@5VPackage Included:1* Receiver2* Receiver antenna  (Available in white and black , we will send them to you at random.)You might also like: Rlink V2 433MHz 16CH Long Range UHF TX and 8CH SBUS RX ComboCaution: Make sure the wires are correctly connected, or it will cause damage.

    $59.00

    SKU:R433-R

    Weight: 0.15 kg

  • RaceFlight Bolt 4n1 ESC

    The RaceFlight Bolt 4n1 electronic speed controller (ESC) provides the power of BlHeli_S performance in a slim package. This makes your electronic stack slim, and generally eliminates the need for an additional PDB. The 4n1 ESC performs great and helps clean up any build.The RaceFlight 4n1 is also extremely easy to install. It is compatible with 4s through 6s batteries and has a built-in current sensor that hooks up directly to the Revolt to provide mAh information. The whole 4n1 ESC pins directly to the Revolt flight controllers and also sends voltage.Specifications30.5mm x 30.5mm mounting hole spacing30 amp continuous draw per motor40 amp burstBlHeli_S5V voltage regulator capable of 3A continuous outputD-Shot ready4s – 6s compatibleBuilt in Current SensorPins to Flight controllerCurrent and Voltage sent to flight controllerEasy InstallHigh-quality components

    $64.99 $49.90, Save $15.09 OFF

    SKU:RFB41E

    Weight: 0.10 kg

  • Wave 4in1 ESC 4x10A 2020

    4in1 ESC with 20x20 mm Mounting holes, supports DSHOT 600, BLHELIS firmwareFeatures:BB21 MCU, 48Mhz Runs BLHELI_S J_H_xx firmwareSupports 2-6S lipo input4PWM inputVoltage output (VBAT)NO BECSupports oneshot / Multishot / Dshot PWMMount holes 20x20mmSupports damped lightNO External capacitors neededDifferent frame will cause different test result with the current, we rated it as the mid-value, in your frame, the current may higher or lower, there is no Guarantee, if you can get same result in your frame.

    $26.99

    SKU:W4I1E

    Weight: 0.10 kg

  • EZlap Timing System

    X-Racer X-1 Racing with EZlap Timing System The EZlap timing system is a race management system that specially designed for both indoor and outdoor small scale drone racing. This new FPV race tracker allows 4 pilots to race at once. The EZlap timing system comes with a master controller, 3 infrared receiver modules, 8 transmitters. The system is powered by a PC or laptop via a USB cable connecting to the USB port of master controller. It is easy to install, simply mount the master controller and receiver modules in the racing gate, install the transmitters in the racing drones, then install the free RCM Beginner software (can be downloaded at the bottom of this page) in your computer and connect with the provided USB cable, you and your friends will be able to start the racing just in a minute.The master controller sends the signals that received from the infrared receiver modules to the computer after processing.The infrared transmitter is 0.4g only, it will not increase any weight to the racing drone since it is so light in weight. It has 8 different address codes which are switchable via the 3-digit DIP switch. Start to send the address codes after powering on via USB.The infrared receiver modules receive the address codes from the transmitters and send them to master controller.Although the Ezlap Timer was originally designed for small scale micro drone race, it was used for 210/250 class FPV race at Liberty Multirotor Racing 2017 and  a great success. The Liberty Multirotor Racing 2017 was held by Romanian Aeromodelling Association.  Liberty Multirotor Racing 2017. Video from Ali Green, winner of the race.Connection and Use:The master controller is powered by the USB after connecting to the PC. No extra power supplies required.The receiver modules and master controller are connected with three special made 6-pin plug cables. In the EZlap timing kit there are 4 receiver modules (including the master controller) included. But how many modules you need depending on your track width and the height of your bridge. The quantity of receiver modules is also limited by the USB loading capacity.The infrared transmitter is powered by the built-in button cell battery.Connect the master controller to the PC with the provided USB cable, access to the free RCM Beginners software and set the pilots information.Package Inlcuded:Master controller x 1 (similar to receiver module but with a USB port)Receiver module x 3 Transmitter for racing quad x 816cm 6-pin plug camble x 33m long USB cable x 1Downloads:RCM Beginners (Free Software)RCM Beginners User ManualThe master controller is powered by the USB after connecting to the PC. No extra power supplies required. It sends the signals that received from the receiver modules to the RCM Beginners software after processing.The receiver modules are connected by 6-pin plug cables. They receive the address codes from the transmitters and send them to master controller.The infrared transmitter is 0.4g only, it will not increase any weight to the racing quad since it is so light in weight . It has 8 different address codes which are switchable via the 3-digit DIP switch. Start to send the address codes after powering on via USB.Three 16cm 6-pin plug cables are included to connect the receiver modules and master controller.The 3m USB cable is used for connecting the master controller to the PC. All the parts included in the EZlap timing system.Management interface of RCM Beginners.The EZlap timing system is working during the racing.

    $49.99

    SKU:FCTR

    Weight: 0.25 kg

  • Dragonfly Low Profile Micro FPV Camera

    This is the micro FPV camera that we are using on the hot selling X-Racer X-1. Using this high quality micro FPV camera, we have saved some much needed space for this design and we are able to place the camera in a low profile position between the two forward motors allowing for a design that does not require the video system being mounted in a high profile top mount of the aircraft.Specifications:CCD 1/4 CmosSignal System PAL NTSCPixel P:720H×576 N:720×487Photosensitive area 1/4:4.077mm x 3.136mm Scanning frequency H:15.625KHz V:50Hz H:15.7343KHz V:60HzHorizontal clarity 800 TV LinesShutter Speed 1/50-1/100000(秒) 1/60-1/100000(秒)Min. Illumination 0.1 Lux / F1.2S/N radio ≥48dB(AGC OFF)Grayscale 10Gamma value 0.45Black level 0.06 Vp-pVideo output 1.0Vp-p 75ΩPower Requirement DC3.3-5VWorking Temperature -20℃~50℃ RH95% MaxPower Consumption 90MAWeight: 2g

    $14.99

    SKU:FXRMC

    Weight: 0.10 kg

  • Dragonfly 25mw 48CH Micro VTX For X-Racer X-1 and KL-EX90

    FPVModel did not stop at the flight controller design. We have also designed a Drgonfly 25mw 48ch Vtx to mount flushly on top of the FC and give and even more aero dynamic low profile design for the video transmission. By using this low profile design were able to streamline the body of the X-Racer X-1 and allow for smooth airflow over the low slung canopy, allowing for smooth airflow over the top of the frame.

    $15.99 $13.59, Save 15% OFF

    SKU:GFVX1

    Weight: 0.10 kg

  • 4 Ports 1S Lipo Charger With XT60 Plug for Tinywhoop X-Racer X-1

    FPVModel 4 Port 1s Lipo ChargerThe little lipo charger is specially designed for the little lipo batteries with 2.0 plug, like the ones used on X-Racer X-1, Tiny whoop and other micro racer. 3-6s input, switchable between high voltage and low voltage charging modes.An the 1s lipos usually only last for 3 to 5 minutes during the flying. It would be better if you have several extra batteries ready. But for an ordinary USB charger, it is just able to charge one lipo each time. With the this new 1s lipo charger, we are now able to charge four 1s lipos at once.Features:1. Input Voltage: 3-6S2. Two charging modes: Normal charging of 4.2v or High voltage charging 4.35V3. Charging time: 30 Min.4. Excellent heat dissipation5. Stable charging status to guarantee the full charge of lipos.

    $9.98 $4.99, Save 50% OFF

    SKU:XRX1BC

    Weight: 0.10 kg

  • Flycolor RAPTOR S-Tower 12A BLHeli-S 2-3S ESC with F3 Flight Controller Built-in OSD

    Specification:Brand name: FlycolorItem name: 12A BLHeli-S 2-3S ESC with F3 Flight ControllerFirmware: BLHeli-SContinuous Current: 12ABurst Current: 15AInput Voltage: 2 – 3SSize: 30.5*33.4*19mmBEC: 5V/1A (F.C)Weight: 11.5gFeature:- EFM8BB21F16G MCU with 50 MHz maximum operating frequency. using dedicated 3in1 drivers, makes the start more smooth. ESC maximum speed is limited to 500k eRPM.- Small size&lighter in weight. More suitable for ultra small multirotors.- Two layers tower structure between 4in1 ESC and FC using quick pin connection. makes the installation faster and more convenient- Exposed pads for Battery and Motor wires, fast welding without additional disassembly, motor replacement is more convenient .- F3 flight controller, supports PPM and SBUS remote control / receiving mode.- FC integrated OSD, no external OSD device is required, integrated 5V/1A for Image transmitter, camera, buzzer, LED and other peripheral devices ;- BLHeli-S firmware designed for superior performance in multirotors, and uses hardware generated motor pwm for smooth throttle response and silent operation.- There are tuneable parameters that can make the code run well even in the most demanding situations, although default settings will work excellently in normal operating environments.- The code supports regular 1-2ms pulse width input, as well as Oneshot125 , Oneshot42 and Multishot . The input signal is automatically detected by the ESC upon power up.- Supports Dshot digital signal, anti-interference ability is stronger, and do not need throttle calibration.

    $58.99

    SKU:FCRST

    Weight: 0.10 kg

  • 2017 New Mugin 4500mm Plane Platform

    As the shipping cost may vary significantly depending on your location, the shipping option for Mugin planes is unavailable. Please contact us at sales@fpvmodel.com to place your order.Friendly Reminder: Due to the size of the Mugin line of planes some damage may occur during shipping. Although the damage is usually minor and can be repaired easily, FPVMODEL cannot be held liable for these damages. This note is to inform you (the buyer) of the risk for damages during transport due to the planes being such a large size.Note: This plane can only be shipped via DHL, please do not choose other shipping methods.We also provide free design services for the internal structure of fuselage and only the production will be charged according to the structure change.Specifications:Wingspan:4500mmLength:2530mmwing area: 180 dm2Maximum speed: 160km/hrMAX cruise speed: 120km/hrStalling speed: 45km/hrMinimum speed: 45km/hrPower: 0.5 - 1.5KW Motor * 2Maximum takeoff weight: 28KGEmpty weight: 10kgFlying Time: Depending on your paticular flying style. Front cabin size (L*W*H): 560*300*270Package Size: 1840*500*420For more information of Mugin UAV, you can also visit Mugin UAV website.

    $4,200.00 1

    SKU:2017MGP

    Weight: 105.00 kg

  • GemFan 2035BN 4-Blade Propellers Purple / CCW + CW

    These fantastic Gemfan 2035BN 4 blade propellers are almost unbreakable, extremely smooth and guaranteed to exceed your expectations.Specification- Type : Micro Class Multi-Rotor- Length : 2"- Pitch : 3.5"- Weight : 0.7 g - Mounting hole : 1.5mm Motor Shaft or T-type mount, Two Holes (eye to eye 5mm)- Hub : 5mm- Included : 2pcs CW and 2pcs CCW in a bag

    $3.00

    SKU:GF2035

    Weight: 0.10 kg

  • E-Design ES120 Motion Control Screwdriver (Pearl)

    E-Design ES120 Motion Screwdriver★The best smart electric screwdirver on the market!★★2017 New Intelligent Electric Screwdriver!★Designed by the same manufacturer of TS100!Built-in STM32 Chip!User can customized configuration parameters!A new must on your workbench!Designed by the same manufacturer of the hot selling TS100, the ES120 Mini Electric Screwdriver has set a new standard for electric screwdrivers. It is an electric screwdriver with a compact structure, smart and exquisite appearance, as well as the function of motion control recognition. The ES120 has only the length of a Parker pen, while endowed with a comfortable design for holding, and a set of highly energy-efficient accessories. Through an OLED screen, the device displays parameters and rotation modes of motion-control recognition. Under these help, you are able to easily complete the disassembling and assembling of your digital devices. ES120 includes a planetary gearbox and a high-speed electric motor, with excellent support from the STM32 embedded micro-processor and angular velocity sensor. It operates at a voltage range of DC3V to 5V, and with various hexagonal screwdriver bits, the device helps you with fast disengaging and engaging of electronic products. Performance ParametersOperation Voltage 3-5VNo-load Speed About 170rpmElectronic Torque 2.5kgf.cmMaximum Torque 30kgf.cm (manual mode)Screwdriver Bit: 4mm hexagonCharging Time 45minRunning Time 30min (full power)Charging Mode Micro USB 5V InputHardware ParametersBody Material:  304 Stainless steel/Copper alloyScreen: 16*96 OLEDBattery:  300mAh 10440 Lithium-ion batteryLengh: 131mmWeight: 114g (Pearl)Rotor Bidirectional overrunning clutchGearbox 1:144 Integrated planetary gearboxMotor 25,000 rpm brush motorMain Chip STM32Sensor Angular velocity sensorSmart Functions1.Battery low voltage reminder, low voltage protection mode; 2.User ustomized configuration parameters (such as torsion, torque, etc); 3.Open source application layer.Package Including:1 x Motion Control Electric Screwdriver1 x Bag1 x Manual

    $103.00 $92.70, Save 10% OFF 1

    SKU:ES120

    Weight: 0.45 kg

  • X-Racer Quadrant 2-6S 25A 32Bit BLHeli_32 ESC Dshot1200

    Features of New X-Racer Quadrant 25A 2-6S 32Bit BLHeli_32 ESC:Uses the latest BLHeli_32 firmware. Dshot up to at least Dshot1200.At rates up to at least 32kHz is supported.Four tiny ESCs can be installed separately on the arms, or installed together like a PCB under the flight controller.2-6s Lipo input.With 25AMp constant RMS, 30A max.Less than 3 grams each piece and about 11.5 grams for a set of 4 pieces.Small in size: 18 x 24mmCompatible to BetaflightF3 Flight ControllerThe new X-Racer Quadrant BLHeli_32 ESC has followed the design of previous 4-in-1 design of X-Racer Quadrant. It is not a single board, but four tiny ESCs can be installed separetely on the arms, or installed together like a PCB under the flight controller. This is the 25A version, there is also another 35A version available for your choice.The new X-Racer Quadrant 25A is flashed with the latest BLHeli_32 program. Dshot up to at least Dshot1200, and at rates up to at least 32kHz is now supported.BLHeli_32 is the 3rd generation of BLHeli firmware after BLHeli and BLHeli_S. BLHeli_32 runs on an ARM 32bit MCU, initially it will be on a Cortex-M0 running at 48MHz, but there are MCUs out there that can run a lot faster.So what can the increased MCU speed do?First of all, it can run input signals with lower latency at faster rates. Dshot up to at least Dshot1200, and at rates up to at least 32kHz is now supported.Secondly it allows packing of more functionality. - Like programmable pwm frequency, up to 48kHz, that can run motors even smoother, and also allows for moving of small but potentially disturbing humps in the throttle response. All ESCs have these bumps, with BLHeli_32 they can now be moved in the rpm range, to a place where the system has low sensitivity to them.- Like auto timing. Which is not the option to choose if you’re after max power. But if you want the most efficient running with very good robustness against desync, it is the perfect choice.- Like voltage and current limiting. Which is implemented in the code, and will be supported on some ESCs. Voltage limiting is desirable for fixed wing crafts. And current limiting adds protection against ESC failure.- Like programmable brake on stop force. Which allows control of the braking of fixed wing props.- Like improved direction change in bidirectional mode.- Like more to come in the future. Such as setup from the FC by using Dshot commands. Such as telemetry functionality. There is room to grow performance and functionality.Some Tips:BLHeli_32 ESC Firmware OverviewWhat is Dshot1200 and Why Dshot1200 is Better?How to Get Dshot1200 Running in Betaflight?Downloads:Download the latest BLHeli_32 Configurator here.Download the BLHeli_32 User Manual here.Download Betaflight 3.2.0 here.

    $18.00-$41.68 1

    SKU:XQ25B32

    Weight: 0.10 kg

  • Orignal Amass XT30 Plug Connectors Male/Female One Pair

    Specification:Brand Name: AmassItem Name: XT30Quantity: 1 male & 1 femaleBody Material: Copper and gold platedInternal Material: Nylon/PAMax. RC/MC: 20A/30ATemperature Resistance: -20°C ~ 120°CConnector: 2mm Bullet TypeWeight: 1.8g/PairWire: 16-20AWGIncludes:Pair Amass XT30 Connector Male & Female

    $0.89

    SKU:AMSXT30P

    Weight: 0.10 kg

  • Matek FC Vibration Damping M3 Standoff

    Matek M3 vibration damping standoffs help to reduce vibrations on your camera or flight controller.Includes:- 4pcs M3*7*4.5 mm Rubber Vibration Damping Standoffs

    $2.79

    SKU:MKVDS

    Weight: 0.10 kg

  • Matek FCHUB-6S W/ CURRENT SENSOR 184A BEC 5V & 10V

    The Matek FCHUB-6S PDB distributes power from a 3~6S LiPo pack to 4 ESCs, as well as providing regulated & filtered DC 5V & DC 10V outputs for powering Cameras, RC receiver, Flight Controllers, Video Transmitters, LEDs, etc. It also has built-in 184A current Sensor, and offers a FFC socket to connect the MATEKSYS Flight Controller conveniently.Features:Total 4 pairs ESC solder tabs are fit for X type frameMax.27V input w/ TVS protectionBuilt-in current sensor 184APDB: 4*30A (4*46A, 5 seconds), 4layers*2oz copper PCBBEC 5V/1.5A(2A Max) w/ 100uF panasonic POSCAP filterBEC 10V/1.5A(2A Max.) w/ 47uF TDK MLCC filter5V & 10V Output LED indicators & Short circuit tolerant

    $9.60

    SKU:FCHUB-6S

    Weight: 0.10 kg

  • X-Racer X-1 V2 Replacement Kit of Frame and Canopy

    * Before Purchasing: Regular price $4.98 USD. For a limited time, we only sell this kit at a killing price of $2.99 USD. Each customer is limited to 10 sets and can not use any discount coupon. This is the replacement kit of frame & canopy for X-Racer X-1 DIY purpose. A transparent packaging is included.

    $2.99 1

    SKU:XMRFC

    Weight: 0.10 kg

  • MyFlyDream MFD Nimbus 1800 Long Range RC FPV Plane Kit Only

    EMS latest notice:Due to the high season. Only the following countries can choose EMS shipping for plane orders: Hong Kong, Taiwan, Singapore, Philippines, Japan, Canada, Australia, France, South Korea, USA, Italy, Belgium, Spain, Russia, United Kingdom and Germany. For other countries, pls choose shipping methods such as DHL or Fedex. Thank you for your cooperation.MFD Nimbus 1800 is a dual rotor long range FPV RC Plane that can serve various purposes like Long Range FPV Flights, Mapping and surveying, Surveillance and Security, Search and Rescue, competitions, payload drop etc.It features Quick assembly and disassembly modular design, wing and the head cover are connected by double hook forms,very convenient to use. The carbon tube has been extended to three quarters of the wing, great wing strength. Battery compartment can hold max 6S 16000mAh lipo battery, for long flight endurance upto 2.5 hours.Description:Brand Name: MyFlyDream (MFD)Item Name: NimbusWingspan: 1800mmLength: 1300mmMax. Flying Height: 3500mMax. Flying Speed: 140km/hMax. Take-off Weight: 5.5kgMax. Payload: 1.5kgNote: This is the KIT version, does not includes any electronic devices like motors, ESCs, propellers or flight controllers. Package Included:1x MyFlyDream MFD Nimbus 1800mm FPV Aircraft KIT only

    $229.99

    SKU:MNB18

    Weight: 4.00 kg

  • HobbyTiger BC-1S06 Lipo 6 Port Battery Charger Balance Quick

    An 1s lipo for the micro racers like X-Racer X-1 and Tiny Whoop only last for 3 to 5 minutes during the flying. It would be better if you have several extra batteries ready. But for an ordinary USB charger, it is just able to charge one lipo each time. With the HobbyTiger BC-1S06, we are now able to charge 6 1s lipos at once.Description:Item name: 6 Port Battery Balance ChargerInput voltage: DC 7-30V (12V/4A recommended)Cutoff voltage: 4.16V-4.24V per cellUSB output: 5V/3ACharge current: 6*500mADimension: 80x50x20mmLighting: chargingExtinguished: completedFlashing: no battery Features:Support 6 X 1s Li-po batteries charging at the same time.High charging efficiencyEnergy saving and environment protecting.Suitable for both charging outside or at home

    $24.99 $12.99, Save $12.00 OFF

    SKU:PABCC

    Weight: 0.30 kg

  • Replacement Kit of Frame, Cover, Props and Motors for X-Racer X-1 V2

    This is the accessories package for X-Racer X-1 V2 and DIY purpose.  Including the cover, frame, props and motors.

    $15.99

    SKU:X1FC4

    Weight: 0.25 kg

Find us on Google+ Watch us on Youtube Like us on Twitter Follow us on Facebook

Home   |   About Us   |   New Products   |   Multi-Rotors   |   FPV Airplanes   |   FPV Equipment   |   Battery / Chargers   |   Tools & Accessories   |   Contact Us   |   Blog   |  Site Map

Product Tags: ABCDEFGHIJKLMNOPQRSTUVWXYZ0-9

Copyright © 2015 FPVMODEL.COM®. All Rights Reserved.