• Tarot 1238 3K Carbon Fiber Propeller 12*38 Props TL2833

    Product Description:Carbon fiber CW / CCW props applies to motor mounting holes for the three-hole series of six-axis, eight-axis multi-Axis brushless motor. Import Toray 3K plain carbon fiber woven carbon content of 100% precision plus high temperature and pressure precast workers, hardness higher than conventional products on the market, each pair of the pros and cons of full carbon fiber paddle through the manual trim static and dynamic balance, TAROT optimization the series full carbon fiber wing efficiency and load of the pros and cons of paddle stability.



    Weight: 0.20 kg

  • 15X4 1540 Real Carbon Fiber propellers props cw/ccw prop pair

     - Material:carbon fiber - Epoxy resin cover- Size:15X4- High gloss 3K twill finish- Weight:23g for each prop - Very strong and light weight With 100% carbon fiber,very strong and light  only 22g/pcsSurface treatment:3K gloss finish!  

    $28.90 $11.56, Save 60% OFF


    Weight: 0.30 kg

  • 11X4.7 Carbon Fiber Propeller CW/CCW 1147 Prop Pair

    Flash Deal! Only $4.99 Now!! Last 5 props.Hurry before they are sold out!11X4.7 Real Carbon Fiber CW/CCW propeller 1147 prop- Material:carbon fiber made in Japan- Epoxy resin cover- Size:11X4.7- High gloss 3K twill finish- Weight:14g for each prop - Very strong and light weightWith 100% carbon fiber,very strong and light  only 14g/pcsSurface treatment:3K gloss finish! 



    Weight: 0.20 kg

  • DJI IOSD mark 2 for DJI WKM ACE ONE Autopilot System

    DJI-IOSD-M2 DJI iOSD Mark II On Screen Display for DJI Wookong M WKM The iOSD Mark II On Screen Display is for the DJI Wookong M AutoPilot and Ace One series AutoPilots. The iOSD On Screen Display enables the pilot to monitor the real-time flight data from the Wookong M WKM  or Ace One Autopilot systems while in flight using First Person View (FPV).The DJI iOSD MARK II can record the flight log, which will help you to record the input and output information of every channel, GPS signal, power voltage, home distance and height, etc. (The current iOSD on the market will have flight log function after firmware upgrade.)The DJI iOSD will allow you to view the following information:Voltage.Vertical velocity.Horizontal velocity.Height.Distance from home point.Horizontal Altitude.GPS satellite number.The iOSD is a multifunctional integrated on screen display module which also has a built-in BEC module that supports 3s-6s LiPo batteries (11-26 volts), when used with the Wookong M or Ace One professional autopilot systems, it delivers a total solution for aerial photography with key information clearly displayed around the outside of the screen.The DJI Innovations iOSD only supports the Wookong M AutoPilot and Ace One systems at this time. The iOSD supports two video input sources, one of which can be selected by the R/C transmitter and switched remotely. It can also change the wireless the transmission channel using the wireless video transmission module by DJI. The iOSD can be upgrade in the future by firmware updates.PlatformSupport WooKong-M CurrentlySize52 mm x 41 mm x 11 mmWeight56gVideo Input/Output ModePAL/NTSCElectrical CharacteristicsVoltage:3S-6SCurrent(Typical Value):60mA@52.2V, 103mA@12.6VRated Power:1.25WOperating Temperature-20°C to +60°CFunctionsiOSD Information TransmissionVideo Transmission, Two Video Signal Channels Input & SwitchChannel Switch Supported for the Wireless Video Transmitter Module specified by DJIBuilt-in BEC, strengthened the drive system MC power supply reliabilityDJI Z15 Supported 

    $158.00 $59.90, Save $98.10 OFF


    Weight: 0.20 kg

  • FY-DOS-A AFSS Inertial Attitude Stabilizer for RC Fixed-wing FPV Control

    Descriptions:- DoS is an aeromodelling balancing instrument designed for a variety of platforms. It is aimed specially at beginners willing to improve their flying skills while enjoying flight safety and ease of operation. Not only it boasts auto-stabilization flight feature and 3D flight mode, but also acts as autopilot if connected with GPS module. Using DoS stabilizer, you can improve your own flight level quickly, enjoy your flight in the air with greately reduced possibility of losing and crashing plane.Features: - DoS adopted the new integrated sensor; more compact, higher stability- Integrated 10 degrees of freedom sensor ,Including:- three-axisdigital accelerometer   - three-axis digital gyroscope- three-axis digital magnetometer- high-accuracy barometer- The circuit board utilizes 4 layer plate made of materials used for military purposes, to strengthen adsorption capacity, “heavy gold” process is used for welding. The servo interface panel uses support structure similar to JR receiver, more reliable and impact resistance.-  Every circuit board is tested on Vibration platform before shipment. Low and high temperature tests are also performed. Protective coating is applied to its surface to deal with severe environmental challenges-  The shell of DoS standard edition is made of Aluminum ,not only has good sense but also have an electromagnetic shielding effect, appropriately increase weight can effectively reduce the vibration influence after installation.-  We adapted the newest designed frame in program design; it is much more concise and reasonable, making improvement at the Sensor filtering aspect, Effective filtering high frequency vibration, optimize the attitude algorithm, magnetic field correction algorithm, etc., more rapid and simple, performance gets further improved.-  There are 6 servos input channels and 8 servos output channels in the interface of DoS, GPS module interface, and data radio interface can be connected to FeiYu ground station software (GCS) and OSD module, to expand and meet the future application of fixed wing airplane and multi-rotor copter etc. it supports Fixed altitude and Heading lock flight and circling flight in the case of no GPS.Functions could be set through software:- Manual Mode- 3D Mode- Auto Stabilized Mode- Fixed altitude and Heading lock flight Mode- Auto Return To LaunchMode- Auto Circling Mode-  DoS software and hardware are good performance in expansibility, it supports firmware upgrade, along with the new released firmware, it will gradually bright us all kinds of amazingfunctions.DoS Module:- Working voltage:4.0~6.0 Volt- Current:50mA (5V)- Size:47 x 30 x 11 mm- Weight: 25g- Working temperatures: -25°C~ +70°C- Max rotate speed:≤ 2000 °/sPackage including:- FY-DOS Inertial Attitude Stabilizer  



    Weight: 0.20 kg

  • Tarot IRON MAN 1000 Octocoptor Frame Kit TL100B01 Ultralight

    Tarot TL100B01 adopts CNC precision machining method to cut carbon fiber board and Aluminum alloy tubes, his design standards is higher than similar products, the full set of rack only weighs 1.60 kgrams. Full folding design, satisfied users high portability requirements, particularly suited to do surveillance, remote sensing, mapping, airborne reconnaissance,Observed fire, life exploration, the cable line patrol, farm monitoring, and other high mobile performance requirements.Specifications: Pure carbon the upper body cover (250 × 240 × 2.0MM) × 1 Pure Carbon lower body cover (250 × 240 × 2.0MM) × 1 M3 pan nut × 48 Pure carbon battery holder (220 × 63 × 2.0MM) × 1 Pure Carbon transit center plate (73 × 73 × 2.0MM) × 1 M3 × 35MM (H7) hexagonal aluminum columns × 6 M3× M3 × 12MM (H7) hexagonal aluminum columns × 4 Pure Carbon motor adapter plate (35 × 38.6 × 2.0MM) × 16 Φ25MM 3K pure carbon tube (495MM) Metal Φ25MM Motor Mount × 8 M3 × 24 Cup Hexagon collar screw × 24 Pure Carbon Fiber Tripod left side plate (345 × 150 × 2.0MM) × 3 Pure carbon tripod side plate (250 × 240 × 2.0MM) × 3 Φ25MM head tube clamp × 60 (color) M3 × 35 Cup Hexagon collar screw × 60 Shock sponge round × 3 M3 × 10MM aluminum columns × 3 M3 * 5MM round head screws × 18 M2 * 18Mm Cup Hexagon collar screw × 3 M2 slip nut × 1 Color stickers × 4 points Large water stickers × 8 Velcro battery × 1 Manual × 1Product parameters:- weighs : 1.6KG (containing tripod)- Tube diameter: 25MM- Wheelbase: 1020MM- Rack diameter: 1070MM- Total height: 380MM- Center cover Specifications: 250 × 240 MM- The equilateral triangle Installation of the motor mounting hole distance: 16MM/19MM/25MM/27MMRecommended configuration:- DJI wookong-m autopilot - 8x mn4014 kv400 /kv330  Or T-motor 3515-15 400kv motor- 8x Hobbywing platinum 40A ESC- 4 x CF 1447 propoller- 6S dupu  Lipo BATTERY 10400mah



    Weight: 2.50 kg

Find us on Google+ Watch us on Youtube Like us on Twitter Follow us on Facebook

Home   |   About Us   |   New Products   |   Multi-Rotors   |   FPV Airplanes   |   FPV Equipment   |   Battery / Chargers   |   Tools & Accessories   |   Contact Us   |   Blog   |  Site Map


Copyright © 2015 FPVMODEL.COM®. All Rights Reserved.