Multi-Rotors Top 10

Sorted:
  • Hobbywing XRotor 40A 2-6S ESC

    1 Features1.1 Special core program for multi-rotor controllers greatly improves throttle response.1.2 Specially optimized software for excellent compatibility with disc-type motors.1.3 All settings except the timing are preset, making usage simple, highly intelligent and adaptive.1.4 The twisted-pair design of the throttle signal cable effectively reduces the crosstalk produced in signal transmission and makes flight more stable. 1.5 Compatible with various flight-control systems and supports a signal frequency of up to 621Hz (Note: all throttle signals over 500Hz are non-standard signals) .1.6 Special drive chip has much better MOSFET driving effect than common driving circuit consisted of discrete components.1.7 MOSFET with extra-low resistance brings high performance and great current endurance.Specification: - Transient current: 60A - Continuous current: 40A - BEC: NO - Battery pack: 2-6S - Weight: 26g - Dimension: 68*25*2.7mm

    $12.90

    SKU:HWXR40A

    Weight: 0.10 kg

  • Acro Naze32 Flight Controller Board by AbuseMark (Rev.6)

    Naze32 is back with a brand new revision and its sure to keep you at the top of your game. STM32F103CBT6 32-bit ARM Cortex M3 processor (72MHz, 3.3V)Invensense MPU6500 MEMS accelerometer + gyroBMP280 BarometerBuilt-in Micro-USB for programming/firmware update36x36mm size, 5 gram weight w/o headersMade in JAPANShipping with 16V input capable voltage regulatorsThese come with pin headers (straight and right angle options), NOT soldered to the board. Naze32 rev6 Features:    USB on right side    PPM/PWM input as through-hole    3.3V, I2C on standard-size headers    Fully pinout compatible with rev5 accessories (OSDoge etc)    SBUS Inverter    Spectrum satellite    MPU6500    Sonar pads w/resistors added for direct connection to 5V sonar    All extra pads (FT, GP, A5) on top, only sonar on bottom    BMP280 barometer    16mbit flashSpecs:    36x36 mm (30.5mm Mounting)    5.3 grams (no headers, 7.3 grams with)    2000 degrees\second 3-axis MEMS gyro + accelerometer (MPU6500)    Input voltage: Max 16V on input rail and up to 35V 6s on the voltage sense lineIncluded: 1x  Acro Naze32 rev6 1x  pin header 1x  Breakout cable Attention (Update on 10/15/2015): Naze32 Rev 6 flight controllers are a new design and some changes have been made that are different from the Rev 5 flight controller. Please keep in mind that when the board is connected to a fully assembled multi rotor a direct connection to USB port on a computer can supply the entire multi rotor with 5 volts of power, please pay attention and make sure all parts are connected properly. Update on 09/21/2015: The Naze32 now has been upgraded from Reversion 5 to Reversion 6This product has different colors (white, red, black and blue), and we will ship it to you with the color at random. Before purchasing, please make sure you accept this. Thank you!

    $15.60

    SKU:NAZE32-A+C

    Weight: 0.10 kg

  • 14x7 1470 Carbon Fiber Propeller Props for RC Multi-Rotor

    Japan import carbon fiber material,epoxy resin coverHigh gloss 3K finishWeight : 22g for each prop,very strong and light weightWell balance!Comes with 5mm and 6mm hole adapters

    $12.90

    SKU:1470CFP

    Weight: 0.20 kg

  • New DAYA 550 Alien Carbon Fiber Folding 4-Axis FPV Quadcopter Frame Kit

     New DAYA-550 Alien Carbon Fiber Folding 4 Axis FPV Quadcopter Frame KitThe latest version DAYA 550 released by DAYA manufacture.Better looking appearance,more reasonable physical structure,and will offer you a perfect flying experience.Whats new:1:Thicker landing gear tube。2:New gimbal mounting plate,more convient to carry the gimbal.3:Fashional apperance4:Double-side motor mount,can be mounted 8 motors now.5:Higher landing gear(15cm)Specifications:- Wheelbase: 550mm- Inner space height: 22mm- Universal motor mount holder- Carbon fiber material, CNC machine,light weight and strong.- Arm backward folding structure, easy to carry- DJI, SX, X4 series flight controller, KK, MWC compatible- Weight: 420g- Color: Black / Red (only for connectors, optional)Configuration Suggest(not included)- Motor: 3508 KV580- 30A ESC- 4S 5000 li-po battery- 1238 prop- DJI Naza v2 flight controller- H3-3D GIMBALFlight time(with recommended equipments):17 minutes

    $109.90 1

    SKU:NDAYA550

    Weight: 1.00 kg

  • New DAYA 16MM Carbon Tube Folding Positioning Seat Group Red

     Product description:The new 16MM carbon tube fixed set , suitable for carbon tube diameter 16MM DIY assembly and TAROT680/690/650 folding multi axle vehicle frame assembly. Better quality than TAROT.Color:black or red (optional)Product specifications:16MM carbon tube fixing sleeve 16MM carbon tube folding positioning seat M2.5 * 6.5 * 10 six angle step screwM2.5 * 22MM cup head screws six angle x 1

    $4.99

    SKU:DYTFPS16B

    Weight: 0.10 kg

  • D12mm/16mm/20mm/22mm/25mm Arm Clamps Tube Clamps Quality For Multirotor 4pcs

    Designed for multirotor DIY. you can assemble your own multi-rotor with the tube clamps.4 colors,delivery at random(4pcs a set),or you can leave a comment for what color you need.D12mm Multi-rotor Arm Clamps/Tube Clamps Suit for tube diameter: 12mmScrew diameter: Φ2.5mm (12.9 class high strength)Screw length: 37mm  (suit for 1.5-2mm thick carbon plate, 2mm recommended)Screw hole spacing: 16.5mm ±0.2Weight: 4.5g  each (including screw and nut)D16mm Multi-rotor Arm Clamps/Tube Clamps Suit for tube diameter: 16mmScrew diameter: Φ2.5mm (12.9 class high strength)Screw length: 27mm  (suit for 1.5-2mm thick carbon plate, 2mm recommended)Screw hole spacing: 21mm ±0.2Weight: 6.3g  each (including screw and nut)D20mm Multi-rotor Arm Clamps/Tube Clamps  Screw diameter: Φ2.5mm (12.9 class high strength)Screw length: 33mmScrew hole spacing:  26.5mm ±0.2Net weight: 7.6g (including screws and nuts)D22mm Multi-rotor Arm Clamps/Tube Clamps Suit for tube diameter: 22mmScrew diameter: Φ2.5mm (12.9 class high strength)Screw length: 33mm  (suit for 1.5-2mm thick carbon plate, 2mm recommended)Screw hole spacing: 26.5mm ±0.2Weight: 8g  each (including screw and nut)D25mm Multi-rotor Arm Clamps/Tube Clamps Suit for tube diameter: 25mmScrew diameter: Φ2.5mm (12.9 class high strength)Screw length: 37mm  (suit for 1.5-2mm thick carbon plate, 2mm recommended)Screw hole spacing: 29.5mm ±0.2Weight: 9.4g  each (including screw and nut)

    $6.50-$10.50

    SKU:4TC12

    Weight: 0.10 kg

  • M3 Nylon Hexagon Nuts For multirotor 10Pcs

     High quality M3 Nylon Hexagon Nuts for Multi-Axis Air Vehicle / Aircraft - White (10 PCS)

    $2.90

    SKU:NUTM3-10

    Weight: 0.10 kg

  • TAROT T15 Folding Octocopter Frame kit Tl15T00

    Tarot T15 folding octocopterProduct Features :    Widely used in UAV aerial photography , remote sensing, mapping, airborne reconnaissance , disaster monitoring, cable transmission line , and other agricultural plant protection for mobile high performance requirements, equipment containing material and requires a longer endurance of blank applications .    Specifically designed to meet 5DII, RED EPIC, C300, FS100, FS700 and large video equipment developed by professional aerial vehicle.    T15 eight- axis folding rack overall net imports of Toray carbon fiber 3K woven by high temperature and pressure prefabricated full CNC precision machining, pure carbon 2.5MM thick matte twill carbon fiber quality beyond conventional commercially available products, with flatness, weight light , creep resistance , high compressive strength and shock resistance and other characteristics , the overall performance beyond the state required standard level performance metrics . Full body matte finish to prevent sunlight reflecting the impact of camera effects . Folding lines can be directly equipped with safe, reliable, avoidthe use of connectors to connect the circuit caused by an accident.    T15 eight- axis folding rack removable battery holder uses  detachable design allows the battery when you receive a shock from the body , reducing the potential impact on the body damage. Bit -shaped designprevents the battery tie off . Multiaxial metal locking clip seat folded portion innovation adoption ¢ 40 Falcon riveted metal dovetail design , with a strong clamping force , its strength is higher than the transverselocking fixed carbon tube locking strength. Excellent damping slip feel unusual feeling when you bring quick fold .    Folding rack full thread structure using carbon nanotubes which have a unique design self-locking screw technology, with excellent resistance to lateral vibration . Lightweight two-tone multi rotor motor mount CNC machining , the overall design has a strong perspective effect, providing a striking visual direction for the body in the air. Carbon nanotube metal bracket connecting point damping design dovetail groove metal hook thread with full carbon tube phase, with excellent adhesion.Standard mount rod diameter Φ12MM, applicable to all mount rod center distance 155MM PTZ used.Standard GPS antenna quick folding seat , folding carry more convenient.Eight- standard high-current slip the lock gilded hub.Standard multi-axis folding tripod more convenient to carry . TAROT T15 recommended configuration:DJI WOOKONG-M flight controller8x T-motor MN4014 KV400  8x T-motor 30A pro ESC / HOBBYWING 30A pro ESC4 pairs x 1555 C/F CW/CCW propeller 1x DUPU 6s 25c 10400mah battery Parameter configuration requirements :Tube diameter : 25MMWheelbase : 1020MMRack Diameter : 1070MMTotal height : 420CMCenter Cover Size : 301 × 209 × 2.5MMMotor mounting pitch : 16MM/19MM/25MM/27MM equilateral triangle installationRotor Size: 15-inch carbon fiber propeller TL2831/TL2813/TL2812Brushless Motor : 4114/320KV multiaxial brushless motor TL100B08-02/TL100B08-01Battery Specifications : 6S 22.2V 10000-15000MHA:35-40A Brushless ESCStandard mount rod diameter Φ12MM, applicable to all mount rod center distance 155MM PTZ UseEffective allocation of the whole weight : 11KGEight fold axis rack Weight : 1.95KGSpecifications:T15/T18 quick release battery holder TL15T01 × 2T15/T18 seat post quick release aluminum group TL15T02 × 2T15/T18 metal reinforcing plate TL15T03 × 1T15 folding frame full carbon tubes TL15T04 × 4Tarot T15 folding frame full carbon tubes TL15T05 × 4Tarot T15/T18 eight fold axis bracket TL15T06 × 2T15 folded eight shaft cover TL15T07 × 1GPS folding bracket TL15T08 × 1T810/T960 six-axis folding tripod TL96013 × 1Multi-axis limit gasket / four loaded TL96021 × 4T810/T960 head mount kit TL96014 × 1Eight- hub group TL100B14 × 1Multiaxial metal locking clip holder TL9605 × 8New Φ25MM motor mount / Orange TL9602 × 2New Φ25MM Motor Mount / Black TL9603 × 6Titanium diamond file × 1Water sticker group × 8Colored sticker set point × 2Magic sticky × 2Manual × 1Spare screw pack × 1Packaged × 1Related Part Number:M4 screws TL9606 aluminum butterflyM3 head nut / Gold TL100A02-02Φ25MM Carbon single battery holder group TL80B04Φ25MM Carbon dual battery holder group TL80B05Tarot T810/T960 under -mount dual battery holder TL96018Tarot battery shockproof paste TL2770Flight control board spare screws TL2778-015-Series multi-rotor brushless motor TL100B08Hanging next T810/T960 battery holder group TL96015Side panels, hood edge protector TL2768

    $649.00

    SKU:TarotT15

    Weight: 4.00 kg

  • Hobbywing Platinum-30A-OPTO-PRO ESC (2-6s) for multi-rotor aircraft

    NOTE:TYPE B WITHOUT MOTOR WIRES, CONNECTORS ARE WELDED DIRECTLY TO THE PCB BOARD.1.1 Output: Continuous 30A, burst 40A up to 10 seconds. 1.2 Input Voltage: 2-6 cells lithium battery or 5-18 cells NiMH battery. 1.3 BEC: Not available. 1.4 Refresh rate of the throttle signal: 50Hz to 432Hz. 1.5 Control Signal Transmission: Optical/electrical coupled system. 1.6 Max Speed: 210000rpm for 2 Poles BLM, 70000rpm for 6 poles BLM, 35000rpm for 12 poles BLM. (BLM = BrushLess Motor) 1.7 Size: 55mm (L) * 25mm (W) * 12mm (H). 1.8 Weight: 31g.2 Features2.1 High performance microprocessor, best compatibility with all kinds of motors, highest driving efficiency.2.2 Optimized for multi-rotor aircraft.  2.3 Smooth, linear, quick and precise throttle response.2.4 Multiple protection features: Low-voltage cut-off protection / Over-heat protection / Throttle signal loss protection.2.5 The throttle signal is transfered through optical/electrical coupled system to avoid electromagnetic interference.2.6 The firmware of the ESC can be updated through the built-in USB adapter in the Professional LCD Program Box.2.7 User programmable. 2.8 Multiple program methods supported: transmitter stick, Digital LED Program Card, Professional LCD Program Box, PC software. Very easy to program the ESC at home or at the flying field.

    $21.00 $12.39, Save 41% OFF 1

    SKU:HW30APROA

    Weight: 0.20 kg

  • Tarot TL68B10 10mm metal silicone damping Block group

    Outer ring is made with CNC aluminum with two M2.5 screw holes, distance 14mm, inner ring is rubber damper with 10mm dia. hole.Specification :- M10 Rubber Damper x 2- M10 Black Aluminum Mount x 1 (22 x 22 x 4mm)- M10 Orange Aluminum Mount x 1 (22 x 22 x 4mm)- M2.5 x 6.5 Inner Hex Screw x 4Suitable for : Tarot FY650 / FY680 / T810 / T960 / T1000

    $3.90

    SKU:TL68B10

    Weight: 0.10 kg

  • Tarot six in one Hub group TL9607 For multirotor

    Product Description: TAROT self-designed multi-axis hub with environmentally friendly materials CNC machining one, in line with RHOS standard.Suitable for multi-axis aircraft power supply integrated hub surface 24K gold plating thickness of 8u, support thousand swappable,Stable at high current, constant temperature discharge. Wave slotted welding point design increases the the solder contact surface, effectively prevent solder Weld. Interlocking non-slip design to prevent shock loose top, only 0.2 mm from the edge of the line the lightweight of processing limit.Specifications:Six hub Block 13.5MM24K gold-plated hub (male) × 1The gilded 3.5MM24K hub (female) x 1Cup head Allen screws M2 × 5 mm × 2M2.5 × 6.5 Allen stepped screw × 1

    $7.10

    SKU:TAROTTL9607

    Weight: 0.10 kg

  • Feiyu FY 41AP-M&GPS Autopilot For Multi-rotors

    Product DescriptionSuppliers:FeiYu-TechPacking Weight:0.3 kgSingle Weight:0.022 kg  Brief Introduction       FY-41AP is an inertial attitude measurement instrument used for FPV flight on fixed-wing aircrafts and multi-rotors aircrafts. It has an integrated OSD video overlay system that presents critical flight information such as power management, airspeed, altitude, and flight direction via its electronic compass, allowing for a clear visual flight while ensuring key information is within sight.       Flight stabilization is achieved via an integrated 3 axis gyro, 3 axis accelerometer, 3 axis magnetometer and a barometric pressure sensor. This enables the module to accurately measure flight attitude, earth azimuth & relative altitude to achieve: Function Introduction    ●Attitude Stabilized Mode - FY-41AP-M can auto stabilize the aircraft flight attitude in this mode, pitch and roll stick center position for 0 °attitude,its endpoint is 35 ° . Yaw stick in the center position will lock current course , its endpoint corresponding maximum rotation rate 135 ° per second, Throttle stick direct control aircraft climb and decline, climbing and declining rate is directly related to the throttle.    ●Hovering Mode - In this Mode, without GPS location, auto locks the altitude, in maximum means climb rate is 3 m/s, in minimum means decline rate is 1.5 m/s.The GPS Module must be connected .When the GPS is connected and at least 5 GPS satellites detected,when Pitch, roll sticks released will lock the new position.    ●Auto Return To Home Mode - The GPS Module must be connected to the DoS with at least 5 GPS satellites detected.In this Mode,will auto return to home points and auto landing.    ●Camera Gimbal Stabilization - FY-41AP multi-rotor firmware,when is used to control the aircraft under 6 axis, can simultaneously control two axis Camera Gimbal Stabilization.     > Related download for multi-rotors :         >> FY-41AP firmware for multi-rotors V2.30 : Download  |  More information of this firmware           >> FY module firmware upgrade software and manual : Download        >> The latest FY-DOS&41AP-SETTING software V1.2 for multi-rotors : Downlad        >> FY-41AP Manual for Multi-rotor :   Read online  |   Download         More FY-41AP related downloads: Click in OSD Video Overlay System Function    ● First Person View (FPV) - FY-41AP has an integrated OSD video overlay system that presents critical flight information on the video for easy enjoy FPV, at the same time, Auto stable, Fixed altitude & Heading lock, Waypoint Navigation , Auto Return To Home function will make FPV operation more easy.        OSD is an essential part for FPV. The FY-41AP can adapt both PAL and NTSC video signals. The entire adaptive process is completed approximately within 1 second.        Integrated OSD Video Overlay System, FY-41AP overlays flight telemetry information onto video image. Information displayed includes: Altitude, Speed, Direction, Home Direction and many more. FY-41AP OSD display part firmware V1.13 : DownloadFY module firmware upgrade software and manual : Download quickly  |  DownloadFeiyu tech kindly remind you: You should to do the firmware upgrade separately for FY-41AP-OSD control module and OSD module. UART2 is the interface connects to the PC computer serial port to do the firmware upgrade for FY-41AP OSD module.If you want to upgrade the firmware of  flight control part ,please click on hereBasic PerformanceSupported Multi-rotors:Quadcopter I4, X4 / Hexacopter I6, X6, IY6, Y6/Octocopter  I8,  X8Supported ESC output:400Hz refresh frequencyRecommended Transmitter: PCM or 2.4GHz with minimum 6 channelsFY-41AP Module Working Voltage: 5.3V@0.2A( Powered by Power Manager)Power Manager:          Working Voltage Range: Power of battery 7~26V (2S ~ 6S)          Measuring current:0~100A          Power for FY-41AP module:5.3V@2A          Power for Video transmission system :12V@2AOperating Temperature: -10°C ~ 50°CAssistant Software System Requirement: Windows XP sp3 / Windows 7 / Windows 8 Flight PerformanceHovering Accuracy :Vertical:±0.8m,Horizontal:±2.5m (GPS Mode)Max Yaw Angular Velocity:150°/sMax Tilt Angle:35°Ascent / Descent:-1.5m/s ~ +3m/s Hardware● Weight&Dimensions:FY-41AP: 34g (58×37×19mm);GPS :24g (32×32×13.5mm);Power Manager:35g(50×24×18mm).Note: the red vibration absorbing mount is not included.   GCS ground station software, used to set the flight parameters, mission planning, monitoring in flight. Software integration of electronic map function can through the map software () the Google earth live map out into the GCS software. The main function is    Parameter Settings — Control parameters setting, course setting, etc    Real time monitoring — It can monitor flight attitude. And via the GCS software you can change the flight altitude in real time and realize the mouse click flight.    Record and monitoring flight —You can monitor and download flight path via the GCS software in your computer.GCS 5.1 Software:   Download quickly   |  DownloadNote: Before using FY GCS above 4.11 version, please make sure that the firmware of FY-41AP is the latest version!More versions of the GCS software, please   click in

    $235.00

    SKU:FY41AP-M

    Weight: 0.40 kg

  • DJI Phantom Multifunctional Landing Gear Upgrade Kit FPV Telematry Install Plate

    Features:- Suit for DJI Phantom- Increase the original landing gear height(5cm)- Compatible with some brushless gimbal- Offer FPV telemetry installation positions - Simple design, light weight- Material: 3K silver glassy carbon plate- The first choice for Phantom FPV modify.

    $6.99

    SKU:LGUK

    Weight: 0.20 kg

  • 1555 15X55 Carbon Fiber Propeller Props CW/CCW for DJI S800 octocopter mulitrotor

    Specifications: - Material:carbon fiber - Epoxy resin cover- Size:15X5.5- High gloss 3K twill finish- Weight:14g for each prop - Very strong and light weightGood for DJI S800 With 100% carbon fiber,very strong and light  only 14g/pcsSurface treatment:3K gloss finish!Well balanceThe type A  is good for DJI S800.Quantity:1 pair (2 pcs,one pcs for CW,the other one for CCW)

    $9.45-$8.45

    SKU:CFP1555A

    Weight: 0.30 kg

  • 1150 propellers carbon fiber props cw/ccw pair

    - Material:carbon fiber - Epoxy resin cover- Size:11*5- High gloss 3K twill finish- Weight:13g for each prop - Very strong and light weightWith 100% carbon fiber,very strong and light  only 13g/pcsSurface treatment:3K gloss finish!

    $20.00 $10.40, Save 48% OFF

    SKU:1150CFP

    Weight: 0.20 kg

  • 1238 Propellers Carbon Fiber Props CW/CCW Pair

    - Material:carbon fiber made in Japan- Epoxy resin cover- Size:12x3.8- High gloss 3K twill finish- Weight:17g for each prop - Very strong and light weightWith 100% carbon fiber, very strong and light. Only 17g/pc. Price for one Pair (CW+CCW).Finish: 3K gloss

    $15.28 $10.08, Save 34% OFF

    SKU:1238CFP

    Weight: 0.15 kg

  • 1340 propellers carbon fiber props cw/ccw pair

    - Material:carbon fiber made- Epoxy resin cover- Size:13*4- High gloss 3K twill finish- Weight:18g for each prop - Very strong and light weightWith 100% carbon fiber,very strong and light  Surface treatment:3K gloss finish!

    $25.90 $10.36, Save 60% OFF

    SKU:1340CFP2

    Weight: 0.30 kg

  • 1447 14*4.7 propellers carbon fiber props cw/ccw pair

    - Material:carbon fiber - Epoxy resin cover- Size:14x4.7- High gloss 3K twill finish- Weight: 20g for each prop - Very strong and light weightWith 100% carbon fiber,very strong and light  only 20g/pcsSurface treatment:3K gloss finish!

    $28.90 $11.56, Save 60% OFF

    SKU:1447CFP

    Weight: 0.30 kg

  • SunnySky X2814 KV900 / KV1100 Outrunner Brushless Motor

    Model: X2814-900KVKV (rpm/v): 900Non-load current: 10V/1.1AWeight: 106g Diameter: 35mmLength : 52.1mm/ 34mm (with shaft/ without motor shaft)Motor Shaft Diameter(mm): 4Prop adaptor output shaft diameter: 6mmModel: X2814-1100KVKV (rpm/v): 1100Non-load current: 10V/1.7AWeight: 106g Diameter: 35mmLength : 52.1mm/ 34mm (with shaft/ without motor shaft)Motor Shaft Diameter(mm): 4Prop adaptor output shaft diameter: 6mmX2814 KV1100    Testing Data (for reference only):    Propeller TypeVoltageCurrentThrust(G)Power(W)G/W RatioApc11X77.4V19.6A1.05kg145.047.23 8.5V25.5A1.4kg216.756.45 10V30.2A1.65kg3025.46 11V34.3A1.86kg377.34.92 11.3V35.6A1.93kg402.284.79EMP11X5.57.4V18.4A1.03kg136.167.56 8.5V22.3A1.3kg189.556.85 10V27.6A1.62kg2765.86 11V31.9A1.88kg350.95.35 11.3V33.4A1.95kg377.425.16EMP12X67.4V26.4A1.3kg195.366.65 8.5V30.9A1.6kg262.656.09 10V38.1A1.98kg3815.19 11V43.5A2.3kg478.54.8EMP9X610V22.9A1.25kg2295.45 11V26.3A1.4kg289.34.83 12V29.4A1.62kg352.84.59 13V32.6A1.8kg423.84.24 14V36.4A2.0kg509.63.92 14.8V38.9A2.1kg575.723.64      X2814 KV900EMP11X5.510V16.8A1.15kg1686.8 11V19A1.4kg2096.69 12V21.6A1.6kg259.26.17 13V24.4A1.8kg317.25.67 14V27.1A2.1kg379.45.53 14.8V29.5A2.3kg436.65.26EMP12X67.4V15.7A1.02kg116.188.77 8.5V18.6A1.25kg158.17.9 10V23.5A1.6kg2356.8 10.5V24.9A1.75kg261.456.69 11V26.4A1.88kg290.46.47 11.3V27.3A1.95kg308.496.32JXF13X6 wood7.4V19.1A1.1kg141.347.78 8.5V22.6A1.38kg192.17.18 10V27.4A1.75kg2746.38 10.5V29.5A1.9kg309.756.13 11V31.5A2.02kg3465.83 11.3V32.9A2.1kg371.775.64

    $41.00 $31.16, Save 24% OFF

    SKU:SSX2814KV900

    Weight: 0.20 kg

  • SunnySky X2820 kv920/kv800 motor

    SunnySky X2820 kv800/920. Model:X2820-920KVKV (rpm/v): 920Non-load current: 10V/1.8AWeight: 140g Diameter: 35mmLength: 58.5mm/ 40mm (with shaft/ without motor shaft)Motor Shaft Diameter(mm): 5Prop adaptor output shaft diameter: 6mmX2820 KV800    Testing Data (for reference only):    Propeller TypeVoltageCurrentThrust(G)Power(W)G/W RatioEMP12x610V21.6A1.52kg2167.03 11V24.8A1.68kg272.86.15 12V28.1A2.0kg337.25.93 13V31A2.18kg4035.4 14V34.2A2.5kg478.85.22 14.8V37.1A2.83kg549.085.15JXF13x6 Wood10V26.5A1.64kg2656.18 11V29.7A2.02kg326.76.18 12V33.9A2.25kg406.85.53 13V37.4A2.49kg486.25.12 14V40.5A2.7kg5674.76 14.8V44.3A3.0kg655.644.57XDL14x8 Wood7.4V23.8A1.3kg176.127.38 8.5V28.3A1.58kg240.556.56 10V34.5A1.95kg3455.65 10.5V36A2.08kg3785.5 11.1V38A2.25kg421.85.33EMP14x77.4V22A1.3kg162.87.98 8.5V26.5A1.6kg225.257.1 10V31.5A1.98kg3156.28 10.5V33.8A2.1kg354.95.91 11.1V36.4A2.28kg404.045.64                  X2820 KV920    Testing Data (for reference only):    Propeller TypeVoltageCurrentThrust(G)Power(W)G/W RatioEMP14x77.4V30A1.53kg2226.89 8.5V35.2A1.85kg299.26.18 9V38.1A1.97kg342.95.74 9.5V41A2.1kg389.55.39 10V44A2.25kg4405.11 10.5V47.2A2.42kg495.64.88 11V49.5A2.6kg544.54.77XDL14x8 Wood7.4V32.9A1.48kg243.466.07 8.5V38A1.83kg3235.66 9V40.5A1.92kg364.55.26 9.5V42.1A2.05kg399.955.12 10V45A2.2kg4504.88 10.5V48.6A2.34kg510.34.58 11V51.7A2.54kg568.74.46JXF13x6 Wood7.4V25.6A1.35kg189.447.12 8.5V30.3A1.55kg257.556.01 10V36.7A1.96kg3675.34 11V41.8A2.25kg459.84.89 12V46.2A2.56kg554.44.61 13V50.7A2.87kg659.14.35 14V55A3.1kg7704.02 14.8V59.5A3.32kg880.63.77EMP12x610V31.2A1.78kg3125.7 11V34.8A2.06kg382.85.38 12V39.8A2.32kg477.64.85 13V44A2.6kg5724.54 14V48.5A2.8kg6794.12 14.8V52A3.12kg769.64.05            X2820 KV1100    Testing Data (for reference only):    Propeller TypeVoltageCurrentThrust(G)Power(W)G/W RatioJXF13x6 Wood7.4V37A1.6kg273.85.84 8.5V43.7A1.96kg371.455.27 9V50A2.18kg4504.84 10V54.1A2.55kg5414.71 10.5V58.2A2.72kg611.14.45 11V62A2.85kg6824.17EMP12x67.4V31.2A1.5kg230.886.49 8.5V35.7A1.74kg303.455.73 9.5V42A2.1kg3995.26 10V46.5A2.32kg4654.98 10.5V48.9A2.52kg513.454.9 11V52.1A2.65kg573.14.62EMP11x5.510V32.6A1.72kg3265.27 11V37A2.0kg4074.91 12V42.8A2.28kg513.64.43 13V46.4A2.65kg603.24.39 14V52A2.9kg7283.98 14.8V56.6A3.15kg837.683.76

    $34.50

    SKU:S2820-92

    Weight: 0.20 kg

Find us on Google+ Watch us on Youtube Like us on Twitter Follow us on Facebook

Home   |   About Us   |   New Products   |   Multi-Rotors   |   FPV Airplanes   |   FPV Equipment   |   Battery / Chargers   |   Tools & Accessories   |   Contact Us   |   Blog   |  Site Map

Product Tags: ABCDEFGHIJKLMNOPQRSTUVWXYZ0-9

Copyright © 2015 FPVMODEL.COM®. All Rights Reserved.