Sorted:
  • 5.8Ghz 18dBi Outdoor FPV Panel Antenna For RC

    5.8G 18dBi Panel antennakeep clear video signal from further distance5.8Ghz Mini 18dBi Outdoor Panel antennaFrequency Range-MHz : 5100-5850bandwidth-MHz : 750Gain-dBi : 18Vertical Beamwidth - : 20°Horizontal Beamwidth - : 20°Ratio-dB : 25VSWR : 1.5Impedance- : 50Polarization : VerticalMaximum Power-W : 100Connector : SMADimensions-mm : 190 × 216 × 50Weight-g : 1.1Mounting Mast Diameter-mm : 40 ~ 50

    $39.53

    SKU:5G8PA18D

    Weight: 1.10 kg

  • D58-2 5.8GHz 2-way 32CH Dual Diversity Receiver

    Diversity is the ultimate FPV solution, allowing the end user to use 2 different antennas to provide the very best in range and redundancy. With a Diversity system, you can utilize 2 differing styles of antennas, such as an omni-directional antenna, and a flat patch, panel antenna, which provides you with long range in a very directional locale. With (2) differing antenna styles, this will allow you to expand your FPV range in new ways, providing a more layered FPV experience.With the Duo Diversity system, your receiver will automatically choose the receiver with the greater signal strength, automatically switching to the best channel that is receiving your FPV video signal. This allows you to use (2) styles of antennas that provide differing signal patterns, which will optimize your FPV experience.The ultimate 5.8Ghz 32CH wireless audio video solution. These receivers allow you to use 1 receiver for 2 transmitters at the same time. These D58-2 receivers also support "Diversity Mode", meaning one receivers with 2 different polarized antennas or 2 different types of antenna to COMPARE & SWITCH automatically for receiving the best video signal.  It is the ultimate solution when you have two high gain directional antennas or one stock antenna with one high gain antenna installed to a  D58-2 receiver.  In addition, if you have an auto antenna tracker, these receivers are the must for you antenna tracker!Product Note: Do not power up receiver unit without antennas - by doing so, you will damage the receiver, and this will void warranty in full. DS58-2 Features:*  Dual receiver system with auto switching for best signal clarity*  Triple, buffered AV outputs*  Can receive 2 different channels at the same time*  Not affect by 2.4GHz R/C transmitters*  AV Receiver with Diversity inputs*  Small, light weight and durable, with anodized aluminum housing Specifications: Video Output: 75Ω/1VppAudio Output: 10KΩ/500mVp?pTV Scanning System: PAL/NTSC/SECAMInput Voltage: 12V/500mAWeight: 197gDimensions: 76mm x 64mm x 18mmIncluding items of D58-21 x Wireless 5.8GHz AV Receiver D58-22 x Stereo jack to RCA AV output cable1 x JST Power Core2 x Stock dipole antennasTo receiver two different channels at the same time (one receiver two transmitters mode)Mount both antennas on, either the stock ones or yours.Connect the AV cables to the AV output AV1 & AV2, and connect the antennas,and then apply the power.Select the channel:RX1 for Rf1 and RX2 for RF2,with different position of the number 1,2,3 names different channels.operation for Diversity use:1.connect the AV cables to the AV output:tracker link,and connect the antennas,and then apply the power2.the Band A,B,E or F frequencies by switch 7 and 8 3.LED4 for RF1 and led3 for RF2. The LED will be be on when the strongest signal is confirmed.It will automatically switch to the receiver with the strongest signal.RECOMMENDED ITEMS FOR D58-2 BosCam TS-351 5.8GHz 200mW Wireless AV TransmitterBosCam TS-352 5.8GHz 500mW Wireless AV TransmitterBosCam TS-353 5.8GHz 400mW Wireless AV TransmitterBOSCAM TX51W 5.8GHz 1000mW FPV Transmitter5.8G High Gain Directional Panel Antenna 

    $79.99 $49.90, Save $30.09 OFF

    SKU:D58-2

    Weight: 0.20 kg

  • 5.8G 200mW wireless audio and video transmitter module

    Specifications:Brand Name: Boscam Model Number: TX5823Transmitter frequency: 5705-5945MHz;8CH Transmitting power: 23dBm/200mW Transmitting distance: >2000mPower supply voltage: 3.3-3.5V Supply current: 320mA Dimension: 18*18*4mm5.8G 200mW wireless audio and video transmitter module    Brief descriptions:a.transmitter frequency: 5705-5965MHz; b.transmitting power:23dBm /200mWc.transmitting distance: further than 2000 metresd.frequency control:built-in frequency and phase lock loope.AV input:analog AV signal inputf.power supply voltage:3.2-3.4Vg.supply current:320mAh.dimension:18*18*4mm  It can be mating with RX5808 receiver module. 

    $6.90

    SKU:5200TXM

    Weight: 0.10 kg

  • MYFLYDREAM AAT Automatic Antenna Tracker V5.0 For Long Range FPV 6 channels

    MFD Innovation. The original best ever automatic antenna tracking solution.Description:- The standard combo contains everything you need to set up your basic MyFlyDream-Tracking system. The only thing you will need is a GPS unit. The MyFlyDream Tracking system will work with almost every GPS that uses the NMEA standard. - The TeleFlyOSD is connected to your GPS unit and transmits the GPS data to the ground via the audio channel of your AV transmitter. On the ground it is fed through the AAT (Automatic Antenna Tracker) to the MyFlyDream-Driver. The Driver handles the signal and controls the servos to turn the AAT.- What makes the MyFlyDream Tracking System so special:- The high quality slipring provides endless rotation, meaning endless freedom, you will never again temporarily loose your signal because the tracker has reached its maximum rotation angle and is turning over to the other side.- The built-in compass unit makes setting up the tracker on the flying field a breeze. No need to check the correct orientation by hand or walk around with your plane in hand, just put your MyFlyDream AAT on a tripod or other support, connect everything with a power source, wait for a proper GPS fix, push "Set Home" and FLY. It′s as simple as that.-Professional Teleflypro OSD (26g with cables).Automatic Antenna Tracker in actionMFD AAT FeaturesNo specific OSD requirement for tracking your airplane.The high quality slipring provides continuously rotation, meaning compete freedom of rotation, you will never again temporarily loose your signal because the tracker has reached its maximum rotation angle and is turning over to the other sideThe built-in compass unit makes setting up the tracker on the flying field in no time. No need to check the correct orientation by hand or walk around with your plane in hand, just put your MyFlyDream AAT on a tripod(not included)or other support, connect everything with a power source, wait for a proper GPS fix, push "Set Home" and FLY. It′s as simple as that.Professional Teleflypro OSD (26g).Includes:- AATDriver x 1- MyFlyDream 6CH Tracker x 1- USB-TTL Programmer cable x 1- TeleFlypro OSD x 1- cables- GPS module and plate antenna are not included. You can use MFD 10hz GPS Module or other standard GPS modules.How MFD AAT worksThe TeleFlyOSD is connected to your GPS module and fetch the GPS coordinates data to the ground via the audio channel of your Wireless AV transmitter.The encoded signal through AUDIO channel fed through the AAT (Automatic Antenna Tracker) to the MyFlyDream AAT Driver(AATDriver). AAT Driver handles the signal and controls the servos to tracking your airplaneTo Make the MFD AAT fully functional, you will also needA Combo Set of Wireless AV Transmitter & Receiver A Directional Patch AntennaA TripodA GPS Module Download AAT Manual 

    $360.00 $316.80, Save 12% OFF

    SKU:MFDAAT6

    Weight: 1.60 kg

  • MYFLYDREAM AAT Automatic Antenna Tracker V5.0 For Long Range FPV 12 channels

    MFD Innovation. The original best ever automatic antenna tracking solution.Description:- The standard combo contains everything you need to set up your basic MyFlyDream-Tracking system. The only thing you will need is a GPS unit. The MyFlyDream Tracking system will work with almost every GPS that uses the NMEA standard. - The TeleFlypro OSD is connected to your GPS unit and transmits the GPS data to the ground via the audio channel of your AV transmitter. On the ground it is fed through the AAT (Automatic Antenna Tracker) to the MyFlyDream-Driver. The Driver handles the signal and controls the servos to turn the AAT.- What makes the MyFlyDream Tracking System so special:- The high quality slipring provides endless rotation, meaning endless freedom, you will never again temporarily loose your signal because the tracker has reached its maximum rotation angle and is turning over to the other side.The 12CH AAT Package includes a 12 channel slipring, so you have 7 spare channels where you can feed another signal through. You can use that for a second video channel and/or an extra audio channel.- The built-in compass unit makes setting up the tracker on the flying field a breeze. No need to check the correct orientation by hand or walk around with your plane in hand, just put your MyFlyDream AAT on a tripod or other support, connect everything with a power source, wait for a proper GPS fix, push "Set Home" and FLY. It′s as simple as that.-Professional Teleflypro OSD (26g)Automatic Antenna Tracker in actionMFD AAT FeaturesNo specific OSD requirement for tracking your airplane.The high quality slipring provides continuously rotation, meaning compete freedom of rotation, you will never again temporarily loose your signal because the tracker has reached its maximum rotation angle and is turning over to the other sideThe built-in compass unit makes setting up the tracker on the flying field in no time. No need to check the correct orientation by hand or walk around with your plane in hand, just put your MyFlyDream AAT on a tripod(not included)or other support, connect everything with a power source, wait for a proper GPS fix, push "Set Home" and FLY. It′s as simple as that.Professional Teleflypro OSD (26g with cables)Includes:- TeleFlypro OSD x 1- AATDriver x 1- MyFlyDream 12CH Tracker x 1- USB-TTL Programmer cable x 1- Cables and adapter- GPS module and plate antenna are not included. You can use MFD 10hz GPS Module or other standard GPS modules.How MFD AAT worksThe TeleFlyOSD is connected to your GPS module and fetch the GPS coordinates data to the ground via the audio channel of your Wireless AV transmitter.The encoded signal through AUDIO channel fed through the AAT (Automatic Antenna Tracker) to the MyFlyDream AAT Driver(AATDriver). AAT Driver handles the signal and controls the servos to tracking your airplaneTo Make the MFD AAT fully functional, you will also needA Combo Set of Wireless AV Transmitter & ReceiverA Directional Patch AntennaA TripodA GPS Module Download User Manual: Click Here

    $378.00 $332.64, Save 12% OFF 1

    SKU:MFDAAT12

    Weight: 1.80 kg

  • Skylark Outdoor Highlight FPV Ground Station 1000cd/m2 Monitor 10.4 Inch No Blue Screen

    This is the new Skylark Ground Station 1000cd/m2 with HDMI input, no need to worry about the blue screen any more. The monitor added design in structure specifically for outdoor use which has broadened the use of the monitor and enhance the stability effectively.> The professional design of structure ensures continuously work for long time, beautiful and generous appearance.> Rich color, dynamic effect of delicate, high sharpness, bright color and empressive contrasting.> Professional driver chip, clear and stable display with better color performance.> Industrial components, satisfy the uninterrupted use of long time.Image transmission interface: standard configuration for image transmission end of inner screw pin within the SMA interface, the antenna terminal for external screw hole SMA interface, such as the use of other interface transmit picture please purchase adapter.Features :1. No blue screen 2. Waterproof Case 3. Supports Composite Video RCA Input 4. 16: 9 or 4: 3 Adjustable Display Ratio 5. Resolution Ratio: 1024 * 600

    $449.00 $395.12, Save 12% OFF

    SKU:SLGS

    Weight: 4.50 kg

  • 1.2g 800mW wireless AV Tx/Rx Set for long range FPV

    Long range wireless audio/video transmitter on 1200Mhz Frq.Specifications:Transmitter- Weight:85g- Size:72*43.5.13.5mm- Input Voltage:DC12V- Current:320mA- Frequency:1.2G—1.3G- Channel:8- Out put:800mW- Transmission range:1500m~3000m(open area) 8CH:(4,5,6,7,8,9,H,C) 1.080 Ghz  1.120 Ghz 1.160 Ghz 1.200 Ghz 1.240 Ghz 1.280 Ghz 1.320 Ghz 1.360 GhzReceiver:- Weight:115g- Size:115*67*21mm- Input Voltage:DC12V- Current:260mA- Frequency:0.9—1.3G- Channel:12Working frequencies:0.910G  0.980G 1.010G 1.040G1.080G 1.120G 1.160G 1.200G1.240G 1.280G 1.320G 1.360GDo not power the Video Transmitter too long time without cooling air.Do not install the Video tx inside fuselage.Do not power the Video Transmitter without Antenna.NOTE:please install the antenna first before you power on and dont keep energizing with TX over 2 minutes on the ground,or it will cause overheating and burn the machine.we recommend you to get a heatsink to use with it.

    $69.00 $53.82, Save 22% OFF

    SKU:P1G2800TXRX

    Weight: 0.30 kg

  • FPV 5.8GHz Petals TX/RX Clover Mushrooms Antenna Set

    FPV 5.8GHz Petals Clover Mushrooms Antenna Set right angle threaded needle/threaded bore ( TX + RX ) Most cost-effective antenna,With a light weight plastic cover to protect the Antenna. Improve the aesthetic.The group antenna TX and RX ,TX is for the transmitter, RX is for the receiverDeascription:- Brand: Happymodel- Configuration: TX x 1 + RX x 1- Interface: B2+B4 threaded needle/A2+A4 threaded bore - Weight:43g A1+A3 or B1+B3 Only accept the reservation,if you need,you can contact us

    $22.50 $9.90, Save 56% OFF

    SKU:58CMAA2+A4

    Weight: 0.20 kg

  • Skylark AAT IV Auto Antenna Tracker w/Compass Bluetooth for FPV

    Description:Skylark AAT IV Auto Antenna Tracker w/Compass Bluetooth for Multicopters FPVFeatures:- Installatin is fast and simple- Tracks 360o horizontally and 90o vertically- Build in compass- Build in bluetooth- Metal Gear- With power module- Dual serv- Support other brand OSD- Firmware upgradeNote: For using with other brand OSD,you will need the converter,the converter need purchase separately,its not included in the package.Update on July 24th, 2017: The power mould have color silver and black. We send by random.

    $320.00 $278.40, Save 13% OFF 1

    SKU:SLAAT

    Weight: 1.50 kg

  • Skylark AAT convert module for other brand OSDs

    Skylark AAT Auto Antenna Tracker Convert ModuleThe skylark AAT Tracker V4 could support the Skylark seious OSD by default, but if need to work with other OSD or flight controller, customers have to buy this convert module separately.Plug and play, small in size (1cm*3cm), weighs only 2g, perfectly compatible with Skylark Tiny OSDFeatures:Plug and play, self-adapting baud rate. Compatible with all the NEMA GPS.Compatible with most GPS and flight controller in the world.Has GPS data transfer fuction.

    $28.00 $23.80, Save 15% OFF

    SKU:SLAATCM

    Weight: 0.10 kg

Find us on Google+ Watch us on Youtube Like us on Twitter Follow us on Facebook

Home   |   About Us   |   New Products   |   Multi-Rotors   |   FPV Airplanes   |   FPV Equipment   |   Battery / Chargers   |   Tools & Accessories   |   Contact Us   |   Blog   |  Site Map

Product Tags: ABCDEFGHIJKLMNOPQRSTUVWXYZ0-9

Copyright © 2015 FPVMODEL.COM®. All Rights Reserved.