Brushless Gimbal Top 10

Sorted:
  • FPVModel Rescue-2 10x Zoom HD Camera Gimbal

    RESCUE-2 10X ZOOM GIMBAL INTRODUCTIONFootage of Rescue-2 10X Zoom GimbalFeatures:All in One Design with Built-in 10x zoom HD camera.Use BaseCam SimpleBGC 32-bit controller Encoder.Compact structure yet easy to install.One Key Lock, Shoot and Return to Center.1035 Wide Range Lens.Less Effect of Temperature Drift.Support HDMI Transmission.Can Work in Extremely Cold/Hot Environment (Operating Temperature: -30℃~+40℃).Rescue-2 is the 2nd generation of Rescue 10x zoom gimbal. One key lock, shoot and return to center. More stable, better camera lens, and less effect of temperature drift. Perfectly integrated with the HD camera and Basecam SimpleBGC encoder, the Rescue-2 utilizes world-leading stabilization technology to automatically stabilize your camera in flight.It is specially designed for search and rescue missions. This is another tool that can be added to your arsenal of equipment to aid you in those times when someone may be in imminent danger or distress. The general field of search and rescue has many different sub-fields typically determined by the type of terrain the search is conducted over, including mountain rescue, ground search and rescue, urban search and rescue, combat search and rescue, and air-sea search and rescue. Rescue-2 is a very versatile tool that can be applied to the vast majority of search and rescue missions due to its size, convenience, and quick deploy time. Using this 10x zoom gimbal will give you a stable eye in the sky that can be controlled via drone pilot or a secondary individual allowing for an overhead view that can cover a large amount of ground quickly and effectively. The 10x zoom function will allow you to remain at a distance yet zoom closely in on anything that requires your attention. The combined use of video transmitters and receivers will give you a live view back at the mission base and allow for coordinating crews in real time giving an effective means for obtaining the best possible outcome. Use the aviation material, Basecam SimpleBGC encoder, 1035 wide range lens and many more... The Rescue-2 is able to make the difficult balance between agility and image quality.User Manual:  Friendly Reminder: The Rescue-2 uses latest Basecam SimpleBGC 32 bits encoder, please use the latest stable GUI version SimpleBGC V2.60b4 for firmware and parameters adjustment. 

    Review: Write a Review

    $818.00 $678.94, Save 17% OFF   

    SKU:RESCUE-2+L

    Weight: 0.90 kg

  • Tarot T4-3D 3-Axis Brushless Gimbal for GOPRO

    Tarot T4-3D three-axis-stabilized head designed for GOPRO HERO3 / HERO4 same size and weight of the camera customization, integrated TAROT series PTZ all high-end technology. Using a combination of aluminum and plastic structure, bringing light weight and stability of the strongest, even in extreme harsh environments, also accurate to lock the camera to maintain a high degree of stability, output ultimate experience of fine industrial grade screen, is the best choice for professional video and aerial photography enthusiasts.Tarot T4-3D-axis auto-PTZ PTZ advanced control algorithms, the built-in stand-alone IMU precise attitude control PTZ, PTZ integrated servo drive module. Support point to follow (PF) and the first person (FPV) modes. All the power and signal lines subtly embedded in the head structure. Pitch axis speed-controlled, the amount of rocker lever corresponding pitch axis rotation speed, the greater the amount of rotation of the lever faster. Integrated from aluminum alloy and industry plastic, bringing light-weight and high-stability. T4-3D is the best choice for professional video and aerial photography enthusiasts.Tarot T4-3D 3-axis stabilized gimbal is designed for GOPRO HERO3 / HERO4 and similar cameras. Applicable to multi-copters, fixed wing airplanes, and heli-copters.Equipped with independent IMU module. Support point follow mode (PF) and the first person view (FPV) mode.The innovative mechanical structure allows the operating speed controllable. The joystick movement is corresponding to axis speed; the bigger movement is, the faster axis speed will be.   All the power and signal wires are embedded in the structure.Support PC interface setting. Firmware upgradable.Features:PC interface - Windows XP/ VISTA/7/ 8 (32 or 64 bit)Point follow mode (PF)First-person view mode (FPV)Built-in independent IMU modulesTAROT PTZ dedicated servo moduleAV output interfaceWide range voltage inputSupport conventional receiver / S-Bus receiver / DSM receiversAccessories:Support Camera: GOPRO HERO3 / HERO4 / other similar camerasInput Power: 2S ~ 6S LiPo batteryMechanical / electrical characteristics:Angle control accuracy: ± 0.02 °Maximum controllable speed: Pitch direction (TILT): ± 200 ° / sControllable range of rotation: Pitch direction (TILT): -120 ° to + 15 °Operating Current: 30mA (@ 25V) 50mA (@ 12V)Stall Current: 350mA (@ 25V) 700mA (@ 12V)Working temperature: -20 ° C ~ 50 ° CWeight: 178gSize: 99mm × 88.5mm × 105.6mmSpecification:Tarot T4-3D 3-axis Brushless Gimbal x1Main controller module x1Connector cable x15V output, servo and video cable x1USB module x1Flight controller connector x1Box x1

    Review: Write a Review

    $142.46 $96.87, Save 32% OFF

    SKU:TL3D01

    Weight: 0.50 kg

  • DYS Aerial Gimbal Summer-Air for Sony A7S & Panasonic GH4

    DYS aerial gimbal Summer-Air for Sony A7S & Panasonic GH4 is newly released. More clear routing and powerful design. The gimbal comes with the exclusive camera fixed board, easy to install or take apart the camera and balance. It can be compatible well with Sony A7S and GH4, or other cameras with similar size and weight.Description:Item: Summer-Air Controller: mini 32bit Alexmos Controller Total Weight: 4.74kg( Including the package) It is Play & Plug option.Package Included:1 x Gimbal 1 x Hanging Mount 10 x 3x8 Screws   10 x 3x6 Screws   10 x 3x10 Screws   10 x 2x8 Screws 

    Review: Write a Review

    $1,112.99 $500.85, Save 55% OFF

    SKU:DYSSAG

    Weight: 4.74 kg

  • Tarot 5D3 3-Axis Self-stabilizing Gimbal TL5D001(free shipping)

    The Tarot 5D3 3-Axis self-stabilizing gimbal is specifically designed to carry the Canon 5D Mark III and 5D Mark II camera and perfectly match with Tarot X6 Hexacopter. Its CNC processing with thin-walled structure gives you a stable footage and precise control even in the most difficult flight conditions.The Tarot 5D3 is based on gimbal system with optimal algorithm. Built-in independent IMU module gives you precise and effortless control. Three working modes are supported, orientation locked, Non orientation locked and FPV. Built-in slip ring simplifies the cabling. The command stick controls gimbal rotation velocity. Tarot 5D3 3-Axis self-stabilizing gimbal can be converted into handheld gimbal with quick release handle (the handle needs to be purchased additionally). Tarot 5D3 3-Axis self-stabilizing gimbal is your best choice. Features:1.Working modes-Orientation-locked control-Non orientation-locked control-FPV mode2.Bulit-in independent IMU module3.Tarot gimbal special drive module4.AV output port5.Camera shutter control supported6.Wide range voltage input supported7.S-Bus/PPM/DSM receiver supportedPeripheralSupported Camera: CANON EOS 5D MARK III & 5D Mark II onlySupported Lens Currently: CANON EF 17-40mm f/4L USMGCU Input Power: 3S~6S LiPoControl Requirement: At least four spare receiver channelsAssistant Software System Requirement: Windows XP SP3; Windows 7; Windows 8 (32 or 64 bit)Mechanical & Electrical CharacteristicsWorking Current: 120mA (@25V) 180mA  3S-6S Li (11V-26V)Operating Temperature: -20°C ~ 50°CWeight: 1.51KGDimensions: 215mm*240mm*246mmWorking PerformanceControlled Angle Accuracy: ±0.02°Maximum Controlled Rotation Speed:Pan axis: ±200°/sTilt axis: ±200°/sRoll aixs: ±200°/sRotation:Pan axis control: ±360° continuous rotationTilt axis control: -135°-+45°Roll axis control: ±48°

    Review: Write a Review

    $919.90 $809.51, Save 12% OFF   

    SKU:TL5D001

    Weight: 2.50 kg

  • New THOR TWO 3X 3-Axis 32Bit Brushless Gimbal For Multirotor

    Friendly Reminder: In case theres any problem during the transportation, when you receive the gimbal, please make sure the six pins of slip ring are still insdie the slot. Please do not power on if the pins missing. Besides, the sensor must be installed on camera. Please contact our customer service for the product manual and gravity setting video if any question. Thank you. Features:-New 32bit gimbal controller,better stability and performance- Gimbal downward mounting, avoiding photography arm during high speed flight- Longitudinal installation, good for copters weight balance- With shock absorb structure- With expansion mount plate, for receiver, telemetry devices, flight controller mounting and avoiding interference between each other- 70mm height between suspension support and center plate, and has enough space to adjust- 12mm carbon fiber tube for suspension bar, center pitch 153.5mm-The Third-axis supports 360° continuous rotation-Gimbal controller had been tuned,no adjust requires- Suit for wheelbase >=700mm multicopterssupply voltage:11V-13V,Supply current:≥3A(recommended)Total weight:950g(with controller)Working current:- Quiescent Current:0.8A (@12V)- Dynamic current:1.5A (@12V)- Locked-rotor current:3A (@12V)Working condition and temperature-10°C ~ 50°CAngle Jitter±0.15°The largest controllable speed- PAN :±180°/s(Speed adjustable)- TILT :±180°/s(Speed adjustable)- ROLL:±180°/s(Speed adjustable)Controllable rotation range- PAN :±360°(rotate continuously)- TILT :+40°/-90°- ROLL:±45°Supported cameras:SONY NEX5,NEX7,A6000 and GH2 seriesPackage including:Thor Two 3x 3-axis gimbal aluminum alloy frameGimbal controller set(with control board,attitude sensor and aluminum alloy shell)Gimbal motors(3 pcs)Six-line slip ring set Anti-vibration ball(4 pcs)Test video:

    Review: Write a Review

    $638.90 $575.01, Save 10% OFF

    SKU:THOR-TWO-3X

    Weight: 1.20 kg

  • DJI Zenmuse Z15 Gimbal Series(free shipping)

    Zenmuse gimbal with the specified camera mounted has to be combined with DJI professional autopilot system. DJI Multi-rotor Aerial Photography Platform—Spreading Wings S800 is recommended to gain the best aerial photography effect, due to advanced aircraft attitude stability control and well-rounded reliable flight platform.The most advance DJI UAV autopilot system offers the precision, stability and safety aircraft operation. In addition with 2/3 axis high-precise and high-speed attitude-stabilized gimbal of DJI original creation, and multi-functional ground station control terminal, we can assure you to take photos and videos with best quality.Three Working Modes· Orientation-locked control· Non orientation-locked control· FPV mode (Reset)Choose which gimbal you need,we will do fast free shipping for you.Click here for more details 

    Review: Write a Review

    $2,499.00 $2,449.02, Save 2% OFF   

    SKU:

    Weight: 1.50 kg

  • Tarot 2-Axis Brushless Gimbal for Gopro camera

    Product description:T-2D PTZ is TAROT company for GoPro Hero3 camera was developed, used in photographic film and entertainment, advertising and many other areas of model aircraft photography. 。 PTZ using 6061T6 aluminumalloy full CNC precision machining, brushless direct drive motor, the overall framework designed with the idea of compact, easy installation and other characteristics.  Stable head structure allows the aircraft is flying at highspeed state, still be able to precisely control the camera mounted GoPro Hero3 remain stable, so that the screen output to achieve the best model aircraft photographic effects.  Product Features:1, support GOPRO Hero3 video auxiliary output 2, support the supply voltage polarity protection and voltage compensation 3, support the motor drive end short-circuit protection 4, support for custom initial pitch angle 5, support sensitivity parameter adjustment and software 3D pose show 6, the support rocker rate mode and position mode 7, support Receiver: conventional receiver, S-BUS receiver, DSM2/DSMJ/DSMX receiver8, support for remote devices: PPM/PCM/2.4G 9, the working voltage: DC 7.4V ~ 14.8V (Recommended 12V, three lithium battery) 10, working current: 200mA-500mA (power supply voltage and the motor related) 11, the working environment temperature: -15 ℃ ~ 65 ℃ 12, the processor: Dual 32-bit high-speed ARM core processor 13, the sensor: Three rotor MEMS gyroscope rotor MEMS accelerometers and the three 14, the maximum angular rate: 2000 ° / sec 15, the maximum acceleration: 16g 16, the control frequency: 2000Hz 17, the motor drive frequency: 20KHz (no noise smoothing driven) 18, the control accuracy: 0.1 ° 19, the control angle range: -45 ° ~ 45 ° (roll), -135 ° ~ 90 ° (tilt) 20, pose solver algorithms: PTZ dedicated brushless motor decoupled EKF algorithm 21, for shooting equipment: GOPRO Hero Related Part Number: Head hanging hook TL68A01 GOPRO camera fasteners TL68A02 GOPRO brushless PTZ camera frame assembly TL68A03 GOPRO head roll arm TL68A04 GOPRO PTZ stand arm motor base TL68A05 GOPRO brushless motor TL68A06 PTZ GOPRO two axes PTZ shock group TL68A07 GOPRO brushless pan rack assembly TL68A08 GOPRO head roll axis brushless motor TL68A09 GOPRO AV video output cable TL68A10 GOPRO PTZ suspension ball TL68A11 GOPRO two-axis gyroscope ZYX22 PTZ Specifications: GOPRO brushless pan rack assembly TL68A08 × 1 GOPRO two-axis gyroscope ZYX22 × 1 PTZ Weight: 195g

    Review: Write a Review

    $153.99 $86.23, Save 44% OFF

    SKU:TAROT2AG

    Weight: 0.40 kg




Find us on Google+ Watch us on Youtube Like us on Twitter Follow us on Facebook

Home   |   About Us   |   New Products   |   Multi-Rotors   |   FPV Airplanes   |   FPV Equipment   |   Battery / Chargers   |   Tools & Accessories   |   Contact Us   |   Blog   |  Site Map

Product Tags: ABCDEFGHIJKLMNOPQRSTUVWXYZ0-9

Copyright © 2015 FPVMODEL.COM®. All Rights Reserved.