Product Filter

Video TX/RX:
1.2G 2.4G 5.8G
Sorted:
  • Runcam TX200U 5.8G 48CH 25mW/200mW Video FPV Transmitter VTX Support Betaflight FC For RC Drone

    ParameterPackage1 X TX200U1 X Set of screwsUser Manual : https://www.runcam.com/download/RunCam_TX200U_manual.pdf

    $17.99

    SKU:RCTX200U

    Weight: 0.10 kg

  • DVL-1 long distance digital wireless HD video transmitter FPV and receiver

    DVL1 is the 1080p Full-HD digital video transmission system including air part and ground part. DVL1 transmits the video, image, OSD and more information by the wireless communication mode. DVL1 is perfect for all fields video transmission because of its light weight, low power consumption, long distance and low latency. DVL1 digital video transmission system is based on 5G frequency and with a maximum 5km range in the air with omni-directional antennas. Latency is less than 100ms. Please put ground system antenna wide side face to transmitter, otherwise, the work distance will be reduce to 50%. The output power of DVL1 is adjustable from 20mw to 800mw. The Receiver module has both HDMI output and wifi output, so the wireless video can be displayed on a Monitor and mobilephone at the same time.Functions&Features:- Up to input resolution: 1080P, 720P supported.- Maximum Transmission Distance: 3KM on the ground; More than 5KM air to ground.- Transmission power: 20mW~800mW adjustable-Weight: (Transmitter) 70g         (Recevier) 200g- Latency: Less than 100ms- Working frequency: 14 working frequency from 5.1~5.9 GHz, adjustable.- Input: HDMI cable-Output: WIFI (for mobile devices)         HDMI cable(for HDMI display devices)- Other features: Multi-person monitoring; Built-in OSDTransmitterRecevierPackage included:1x Air System1x Ground System2x Air System Antenna2x Ground System Antenna2x Ground System Mobile Antenna1x Air System Power Cable1x HD Port Cable(D-D)1x Extension Bar

    $579.90

    SKU:R2DVL1

    Weight: 1.00 kg

  • Aomway TX004 Mini 5.8G 25mw/100mw/200MW Power Switchable Transmitter

    TX004 Transmitter is a 5.8G ISM band simulation diagram transmitter with a stable output power, long-distance transmission,  powerful filter. Can guarantee the image of the maximum throttle no snow, no stripes and so on. TX004 transmitter also has the funtion of remote control the OSD interface and support for more than 8 peoples at the same time flying.Features:-Output power is stable, long-distance transmission: ≥0.5km@25mW, ≥0.8km@100mW, ≥1km@200mW (Original antenna)-Transmit power 4 block switch: 0mW/25mW/100mW/200mW-64 frequency output, has E group of eight competition frequency at the same time without interference-Fast frequency lock-With self-test output power-Video format: NTSC /PAL-Wide input voltage range, low power consumption: 7V~24V,+12V/170mA@200mW.-Small volume: 27mm×27mm×4.5mm-Light weight: ≤3g (Do not including the antenna)Frequency Table:

    $16.99

    SKU:AWTXT

    Weight: 0.10 kg

  • Dragonfly 48CH Battle Diversity Receiver w/ Built-in Monitor

    Dragonfly 48CH Battle Diversity ReceiverWe are listening to our customers. This is a follow-up version of another CNC shell Dragonfly diversity receiver. Considering the aluminum CNC machined shell version is not competitive in price, we made this new one that keeps almost the same features, while much lower in cost. 48 channels with raceband, built-in monitor, DVR, color-coded channels and many more. Is this the diversity receiver you are looking for? Plug and play. The two built-in two receivers have a high sensitivity of -95dbm which is much higher than that of other receivers. You can automatically receive the best signal and maximize your signal coverage. Built-in 1.54" monitor for instant display, showing the input voltage, frequency band and channel on the screen. You are also easy to observe the channel interference. Futhermore, we are using the monitor with top quality mineral glass which are widely used on the watches to make sure the monitor will not be scratched.The Dragonfly Diversity Receiver is with dual video outputs, easy connect it to various devices. It has a function of DVR files protection that automatically save the footage even suddenly power off.Easy to use button with channel autoscan. Channel searching comes with memory function, no need to search every time.Specifications: Receive Frequency: ISM 5.3GHz-5.95GHz 48 CHWorking Voltage: +7.0V~+26.0V, USB 5.0VCurrent: <350mA/12V DCVideo output: 1V±0.2Vp-p/75ΩAudio output:0.5 ~ 2.0Vp-p/10KΩOutput: RF1, RF2TV Standard: PAL/NTSC/SECAM (Automatic)Wireless receiver sensitivity:<-95dBmAntenna connector: SMAFeatures:Supports 6 bands 48 channels with raceband.7-26v wide input, can be powered by USB as well.DVR files protection. Automatically save the footage even suddenly power off.Dual video outputs, easy connect to various devices.Built-in 1.54" monitor for instant display.Channel setting with different LED colors and the modes are seletable to show your own personablity.Channel searching comes with memory function, no need to search every time.The receiver sensitivity is -95dbm, higher than that of other receiver.Firmware upgradable.48 Channels with Race BandFirmware Upgrade:1.Plug in the USB cable to your computer. (Do not turn on your receiver)2.Press the REC/PLAY button then turn on the the receiver. You will see a USB drive around 100KB-8MB. Put the upgrade firmware (SJRC806-ENC.bin) to the USB root then power off. It will upgrade when you power on next time.Built-in 1.54" monitor for instant display, showing the input voltage, frequency band and channel on the screen. You are also easy to observe the channel interference. Futhermore, we are using the monitor with top quality mineral glass which are widely used on the watches to make sure the monitor will not be scratched.The LED color changed with the change of channels. You can set the colors you like by yourself to show your own personablity.Dual video outputs, easy connect to various devices.Necessary cables and accessories included. Please take a note that the antennas are not included. 

    $99.98 $69.99, Save 30% OFF

    SKU:D48DREV

    Weight: 0.50 kg

  • Dragonfly 48CH Diversity Receiver w/ Built-in Monitor

    Dragonfly Diversity ReceiverAluminum CNC machined shell, 48 channels with raceband, built-in monitor, DVR, color-coded channels, tripod mount and many more. Is this the diversity receiver you are looking for? We have been going over the design of the Dragonfly Diversity Receiver for several months now and have finally settled on the final production version.Plug and play. The two built-in two receivers have a high sensitivity of -95dbm which is much higher than that of other receivers. You can automatically receive the best signal and maximize your signal coverage. Built-in 1.54" monitor for instant display, showing the input voltage, frequency band and channel on the screen. You are also easy to observe the channel interference. Futhermore, we are using the monitor with top quality mineral glass which are widely used on the watches to make sure the monitor will not be scratched.The Dragonfly Diversity Receiver is with dual video outputs, easy connect it to various devices. It has a function of DVR files protection that automatically save the footage even suddenly power off.Easy to use button with channel autoscan. Channel searching comes with memory function, no need to search every time.To ensure the longest and best performance, the Dragonfly Diversity Receiver comes with two built-in micro mute fans, no noise and able to make the receiver stay cool. As per our internal test, the Dragonfly diversity receiver works great even after a long time exposure to the sun during a hot day.Features:1. Aluminum CNC Machined Shell.2. Built-in micro fans, able to work under hot weather.3. Supports 6 bands 48 channels with raceband.4. 7-26v wide input, can be powered by USB as well.5. DVR files protection. Automatically save the footage even suddenly power off.6. Dual video outputs, easy connect to various devices.7. Built-in 1.54" monitor for instant display.8. Channel setting with different LED colors and the modes are seletable to show your own personablity.9. Channel searching comes with memory function, no need to search every time.10. The receiver sensitivity is -95dbm, higher than that of other receiver.11. Firmware upgradable.48 Channels with Race BandHow to use Dragonfly Diversity ReceiverShort press "Band" for changing band.Short press "Power" for changing channel.Short press "DVR" for DVR shooting.Short press "Manual" for OSD.Long press "Power" to turn on or turn off.Long press "DVR" to enter replay mode, then press "Band" to move upward and press "Power" to move downward, short press "DVR" to play, long press to delete, short press to confirm deletion, and press "manual" to exit. During playing, the user can press the button of moving upward or downward to fast forward or rewind the video.Long press "Manual" to enter manual setting, then press "Band" to move upward and press "Power" to move downward, press "DVR" to enter. Upward and downward to set the parameters, press "DVR" to confirm and short press "Manual" to exit.Built-in two micro fans, able to keep cool under extremely hot weather. As per our test, the Dragonfly diversity receiver works great even after a long time exposure to the sun.

    $169.99 $139.39, Save 18% OFF

    SKU:DFDDR

    Weight: 0.50 kg

  • Matek 5.8G 38CH 25/200/500mW Switchable Video Transmitter VTX-HV With BFCMS Control

    Mateksys is expanding their product range and releasing their own video transmitters. The first one is Matek VTX-HV. It is separate half size of a normal FC, stackable board with OSD. ‘HV’ probably stands for High Voltage, as this VTX works directly from up to 6S HV LiPo battery. Has 5V output for camera, audio input, iPEX antenna connector, LED’s for channel band and power indication and traditional button control.* Friendly reminder: the new version of VTX-HV contains 38 channels only as the channel 5945 and 5645 are not to be used in the United States. Please be aware of the difference between the text and picture descriptions. Specifications & FeaturesInput voltage: 7~27V(2~6S LiPo)38 standard channels, A/B/E/F/R BandOutput Power: 25, 200, 500mW switchableBEC Output: 5V/1A for Camera or FCTraditional button+LED control of frequency and powerBFCMS (BFOSD & LUA Script) control via FC UART _TXFirmware upgradeablePower Consumption: 3.1W Max. @ 500mWVideo Input Impedance: 75 OhmAudio Subcarrier Frequency: 6.5 MHzRF Connector: U.FL (IPEX)Video Format: NTSC/PALWeight: 6g (Tx only, w/o SMA cable)Size: 36*22*6.5mm w/30.5mm mountingU.FL version Packing5.8G Video transmitter (U.FL)PVC Heat-shrink tubeU.FL to SMA Female, RG178 cable 10cmU.FL 5.8G whip antenna, RG178 10cmMMCX version Packing5.8G Video transmitter (MMCX)PVC Heat-shrink tubeMMCX to SMA Female, RG178 cable 9cm

    $29.90 $26.91, Save 10% OFF

    SKU:VTX-HV

    Weight: 0.10 kg

  • BattleRC Pagoda 2 5.8GHz Antenna RHCP SMA / RP-SMA Optional 2pcs

    The Pagoda 2 from Battle RC is specially designed 5.8G fpv antenna on the basis of Maarten Baert circularly polarized antenna drone racing design. It is good for both video TX and video RX. The structure is made of 3 layers of PCB board, which integrated one ounce copper foil.Maarten Beart Website (Creator for the Pagoda): http://www.maartenbaert.be/quadcopters/antennas/pagoda-antenna/The Pagoda 2 5.8G antenna is an omnidirectional circularly polarized antenna design. The main advantage of Pagoda 2 antenna is the rejection rate of the dual circular polarization waves.?The Pagoda 2 is manufactured according to the Maarten Baert optimized circular polarized antenna design. It consists of 3-layer PCB in which embedded 1 ounce copper foil, replacing the original typical of the wire structure components.?This antenna weighs only 8g, heavy polyolefin heat shrinkable material wrapped to the PCB can well protect PCB. Its simplified manufacturing process keeps costs low allowing for a great low price for an antenna with high performance.Price for two pieces of Pagoda 2 antenna, one is with a size of 50mm, the other is 80mm.Features:Good omnidirectional radiation pattern.Good axial ratio.Reasonably small.Easy to manufacture within fine tolerances at low cost, even for a hobbyist.Specifications :?Brand: BattleRCType: RHCPGain: ~2dbicAxial ratio: < 1.3Bandwidth: 5.5GHz-6.05GHzRadiation Efficiency: 95%SWR: S11 < -20 dB, VSWR < 1.22 (at center frequency)Size: 80mm / 50mm?Cable: Semi-rigid RG402Connector: SMA / RP-SMA optionalWorks great as both a transmitting or receiving antennaCompatible with other styles of 5.8GHz antennasPackage Includes:1 x 50mm BattleRC Pagoda 2 5.8g RHCP Antenna?1 x 80mm BattleRC Pagoda 2 5.8g RHCP Antenna?

    $13.50 $10.80, Save 20% OFF

    SKU:MBPA

    Weight: 0.10 kg

  • Dragonfly 25mw 48CH Micro VTX For X-Racer X-1 and KL-EX90

    FPVModel did not stop at the flight controller design. We have also designed a Drgonfly 25mw 48ch Vtx to mount flushly on top of the FC and give and even more aero dynamic low profile design for the video transmission. By using this low profile design were able to streamline the body of the X-Racer X-1 and allow for smooth airflow over the low slung canopy, allowing for smooth airflow over the top of the frame.

    $15.99 $13.59, Save 15% OFF

    SKU:GFVX1

    Weight: 0.10 kg

  • Skyzone 5.8G 25mW 48 Channel Transmitter with Camera

    Features:1. When the camera is powered on, the red and blue LED lights are on at the same time.Then the blue light starts to flash, the number of blinks represents current active channel. The red light starts to flash, and the number of blinks represents current active band.2. Short press 0.5 seconds once, for the operation channel. Channel 1-8 is cycle working and corresponds to the number of times the channel indicates the blinking blue light. Refer to the channel list below.3. Press and hold for 3 seconds, and the red and blue LED flashes at the same time, the number of blinks represents current active band. (A band flashes once, B band flashes twice, by analogy. E-3;F-4;R-5;L-6.) 3 seconds without key operation, automatic exit frequency band operation mode, return to normal display mode. Specs:Frequency range:

    $23.99 $15.59, Save 35% OFF

    SKU:SJCT100

    Weight: 0.10 kg

  • Dragonfly 5.8G 48CH 25/200/600mw Stackable Video Transmitter

    The new Dragonfly 5.8g stackable VTX comes with 48 channels, 9-26v input and switchable between 25/200/600mw. The stackable design makes you easy to place this VTX above your flight controller. With 48 channels, no need to worry about the interference while powered on any more.Main Features:Stackable Design, easy to place above flight controller.9-26V input, suitable for multirotors of various sizes for indoor and outdoor flight.Switchable between 25/200/600mw, convenient for adapting the flying environment.Comes with 48 channels, including the Raceband.Two ways of connection: Directly plug-in or soldering.SMA and RP-SMA connectors are selectable.Heat sink design to avoid over-heated.Extension cable is selectable. (Need to purchase seperately, Clike Here to Buy)Specifications:Operating Voltage: DC 9-26VSupply Current:270MAOperating Temperature:-20℃~80℃Audio Carier Frequency:6.5MHzVideo Input Impedance:75ΩWeight:10 gramsAntenna Connector:SMA / RPSMAVideo Format:PAL / NTSCOutput Power:13~28dbmChannels:48CHFrequency Range:5362~5945MHzPort Connector:2.0 socket, 5 pinSize:35x35mmUser Manual: ?Outer Diagram:Frequency Table:

    $23.80 $16.90, Save $6.90 OFF

    SKU:GFVTX

    Weight: 0.10 kg

  • Dragonfly Booster 5.8G 3dBi TX/RX FPV Antenna RP-SMA/SMA

    Dragonfly Booster Durability TestBetter signal quality and much more durable. These Dragonfly Booster antennas can be survived from the hardest crashes with the specially designed cover and silver connector. Three different sizes?(5cm, 8cm and 11cm) in SMA and RP-SMA are selectable to meet your special needs for the build.Specification:Frequency Range: 5400 ~ 5900MhzImpedance: 50ΩV.S.W.R: ≦1.5Gain: 3 ~ 3.5dBiFirst Upper Sidelobe Suppression (dB) ≥15Front to Rear Ratio (dB) ≥25Cross-polarization Discrimination (dB) ≥15Port Isolation (dB) ≥28Polarization: Vertical/HorizontalMaximum Input Power: 10WCable: RG141Color: BlackConnector: RP-SMA / SMA (Optional)Length: 5cm / 8cm / 11cm (Optional)Weight: 10g / 11g / 13g Package Included:?1 x Antenna* 5.8G Vertical Polarization* 5.8G Horizontal Polarization

    $15.98 $7.99, Save 50% OFF

    SKU:FBSA

    Weight: 0.10 kg

  • STX202 Dual Transmitter for Skyzone SKY02S V+ Goggles

    Please note that STX202 Dual Transmitter is a replacement part of Skyzone SKY02S V+ FPV Goggles. It may not be compatible with other goggles or products.Dual Transmitter STX202 Specifications:

    $45.99 $35.87, Save 22% OFF

    SKU:STX202

    Weight: 0.15 kg

  • FPVModel Dual channel 5.8G 40 channel competitive version receiver built in DVR

    FPVModel Dual Channel 5.8G 40CH Receiver DVR FootageFPVMODELs 5.8G Explorer 40 channel dual diversity receiver. This reciever is designed for both close range and long distance flights featuring a built in DVR that can record your flights and later(if needed) be used to review flight footage to help aid in the retrieval of a lost model. The channel range covers the standard 32 channels weve all come to know over the last few years and the additional race band that has recently started to take over the miniquad scene. This is perfect for those tight indoor tracks and helps pick up a better signal where instances of multipathing are high. Comes with a standart thread that fits most tripods so this will allow for easy mounting and getting some of the height needed for better signal reception. 5.8G Explorer also features a 3.5mm jack for easy connection to your goggles. Battery straps on the back allow for easy battery storage and can accept a wide range of batteries from 2S to 6S.(7-24v) Receiver Sensitivity of -96dBm.Features:1 Receiving frequency: ISM 5.6GHz-5.95GHz 40CH2 Operating Voltage: 7.0V-28.0V3 Supply current: <300mA/12VDC4 Video Output Level: 1V±0.2Vp-p/75Ω5 Aidio Output Level: 0.5~2.0Vp-p/10KΩ 6 TV System: PAL/ NTSC / SECAM(AUTO)7 Wireless Receiver Sensitivity: <-92dBm(15dBuV)8 Antenna Connector: SMA Connector9 Weight: 212g(dvr)10 Dimensions(L*W*H): 60*150*27.5mm11 Operating Temperature: –10℃~+85℃Item Packing:1 x receiver1 x power cord1 x video line2 x antenna2 X band1 x 3.5mm audio & video plug

    $86.99 $69.59, Save 20% OFF

    SKU:FR007

    Weight: 0.70 kg

  • Dragonfly 5.8G Receiver Module for Fatshark Dominator FPV Goggles

    The sale price is only limited to 50 Qty.Hurry before they are sold out!Higher sensitivity and much more durable. Perfect for those who want to upgrade to race band.The Dragonfly 5.8G receiver module is made for the Fatshark Dominator line of goggles. The RX has been manufatured in white to match the white headset for the flyers that dont use the plastic snap cover but can also be used with the cover in place. This reciever has a built in LED to make it easier to know what channel you are on and make the channel selection process much smoother. No fooling around counting flashing lights with buttons that are too small and hard to press. Long press the button to band and use the fatshark channel buttons to cycle the channel.Quick Intructions:Place the module into your Fatshark Dominator receiver. Long press for Band, Cycle goggle channel switch for channels. The receiver will display the currently active band with the LED.- 1 flash = BOSCAM Band A- 2 flashes = BOSCAM Band B- 3 flashes = BOSCAM Band E- 4 flashes = Airwave- 5 flashes = Race bandSpecifications:1. 40 channels (5 Bands with 8 channels each)2. -90dBm sensitivity3. Works with all BOSCAM A/V transmitters (200mW, 400mW, 500mW)4. Works with Airwave transmitters (tested with the new ImmersionRC 600mW). Airwave frequency support is not full spec. Range is affected, as well as transmission picture quality! We highly recommend the use of BOSCAM transmitters.5. 3 - 5V operating voltage6. SMA antenna connector7. Fatshark Dominator compatible, toggles channels using the Fatshark button!8. Can be installed into Fatshark Attitude goggles!Supported Frequencies:

    $14.50 $8.98, Save $5.52 OFF

    SKU:RFFSG

    Weight: 0.10 kg

  • FrSky XSR 2.4GHz 16CH ACCST Receiver S-Bus CPPM Output Support X9D X9E X9DP X12S X Series

    Description: Channel: XSR-16CH(1-16CH from SBUS channel,1-8ch from CPPM Channel)Dimension: 26 x 19.2 x 5 mmWeight: 3.8gOperating Voltage Range: 4.0~10VOperating Current: 100mA@5VFirmware UpgradeableCompatibility: FrSky X-series Module,X9D,X9DP,X9E,X12S(XSR is incompatible with D-series Module) Features:Smart Port enabled,realizing two-way full duplex transmission.S-BUS outputCPPM outputLighter weight and physically smaller than X4RMore number of channels:1-16CH from SBUS channel,1-8ch from CPPM Channel

    $31.89 $19.90, Save $11.99 OFF

    SKU:XSR

    Weight: 0.20 kg

  • Dragonfly 5.8G 40CH Mini TX 25mw/200mw

    Introducing the new ultra light weight Dragonfly 5.8G mini video transmitter. Featuring the full range of 40 channels to ensure you can transmit on the frequency that is most convenient to you. This transmitter features a smart design with push button band & channel navigation, along side the edge of the transmitter is a power switch enabling the user to turn the tx off and on at will. This is especially helpful when connecting to the computer or powering the aircraft without the antenna on. Press once quickly to change channels, hold down with a slight pause to enter band mode and cycle through the full range of bands. Dont worry about fumbling with dip switches and channel diagrams with this smart push button design.We have 25mw and 200mw sending power for your choice. Price for single TX only.Frequency and Channel Frequency Table

    $21.99 $16.99, Save $5.00 OFF

    SKU:D58MTX

    Weight: 0.10 kg

  • Aomway Mini 5.8Ghz 600mW 40CH Wireless A/V Transmitter TX V2 Upgrade Version

    Features:- Power: 600mw/28dbm. Voltage: 12V. Current: 300mA.- 600mw , 5 groups 40 adjustable frequency band:A: 5705-5945MHz B: 5733-5866MHz; C: 5725-5865MHz D:5740-5860MHz; E: 5658-5917MHz;- 600mw transmitter net weight: 11g.- Stereo input left and right channel transmit separately.- AV system format: PAL / NTSC.- Digital tube display. Single button to adjust channel and frequency band.- Wide Input Voltage: DC7-28v. - Dual mode channel: button control model and PWM model control model

    $56.99 $39.00, Save $17.99 OFF

    SKU:A600MTX-U2

    Weight: 0.10 kg

  • FrsKy 2.4GHz Futaba FASST S.BUS 4CH Receiver TFR4SB

    Compatibility:FASST 2.4G Air Systems (7CH Mode/Multi Mode): 6EX, 7C, TM-7, TM-8, T8FG, T10C, TM-10, T10CG, T12Z, T12FG, TM-14, T14MZ, etc..FASST 2.4G Surface Systems (C1 Mode): 3PK, 4PK, etc..Compatible servos via SB port: Futaba S.BUS servos, FrSky D12MB servoFeatures:Compatible with FASST 2.4GHz Air Systems (7CH Mode/Multi Mode) & Surface Systems (C1 Mode) SB port is compatible with Futaba S.BUS servos and FrSky servo D12MB. No receiver channel limits (except by those on your transmitter) and prevents mismatched servo channel connections. Two selectable failsafe setting options (use native failsafe on transmitter or set failsafe on TFR4SB directly.High sensitivity and stability.Wide operating temperature range, suitable for all kinds of models.Specifications:Number of Channels: 3~16 (4~16ch in S.BUS mode)Operating Voltage Range: 3.5V~10VOperating Temperature Range: -10~80 degree of CelsiusServo Frame Rate: 14ms (FS-Normal Speed Mode), 7ms (HS-High Speed Mode)Dimension: 41x24x6mmWeight: 6g

    $35.95 $28.95, Save $7.00 OFF

    SKU:TFR4SB

    Weight: 0.20 kg

  • HAWKEYE MINI 5.8GHZ 200MW 32CH WIRELESS A/V TRANSMITTER TX RACEBAND

    Specifications:- 5.8G FM AV sender- Power: 200mW- Built-in four frequency optional: 5740-5860MHz/5705-5925MHz/5725-5865MHZ/5685-5917MHZ(RaceBand)- 32 Channel- Dimension: 21*20*8mm- Weight: 6g(without antenna)- Stereo sound, left/right track independant transmission- PAL/NTSC supported- Interface: 10cm SMA- Wide input voltage DC6-24V

    $34.95 $32.15, Save 8% OFF

    SKU:HE58VTX-10

    Weight: 0.10 kg

  • FrSky X4RSB 3/16 Channel Telemetry Receiver

    Description:Brand name: FrSky Item name: FrSky X4RSB 3/16ch Telemetry ReceiverDimension: 40*22.5*6mm (L x W x H)Weight: 5.8gOperating Range: full range (>1.5km)Operating Voltage Range: 4.0~10VOperating Current: 100mA@5VNumber of Channels: 3/16Ch (1~3ch from conventional channel outputs,1~16ch from SBUS channel)Compatibility: FrSky X-series Module (XJT etc.) Taranis X9D in D16 mode(X4RSB is not work with D-series Module)Features:RSSI (PWM) outputLighter weight and physically smaller than D8R-II & D6FRTwo selectable failsafe setting options - native failsafe or user programmable failsafeExternal analog telemetry port (AD2)SB port is compatible with Futaba S.BUS servos and FrSky SBUS&CPPM compatible servoPackage Included:1 x FrSky X4RSB Receiver

    $28.99

    SKU:X4RSB

    Weight: 0.20 kg

Find us on Google+ Watch us on Youtube Like us on Twitter Follow us on Facebook

Home   |   About Us   |   New Products   |   Multi-Rotors   |   FPV Airplanes   |   FPV Equipment   |   Battery / Chargers   |   Tools & Accessories   |   Contact Us   |   Blog   |  Site Map

Product Tags: ABCDEFGHIJKLMNOPQRSTUVWXYZ0-9

Copyright © 2015 FPVMODEL.COM®. All Rights Reserved.