Product Filter

Gain Antennas:
1.2G Antenna2.4G Antenna5.8G Antenna
Sorted:
  • BattleRC 5.8G FPV Micro VTX Clover Antenna 70mm

    The sale are limited to only 30 qty! Hurry before they are sold out!A new must for FPV. These are the 5.8G FPV Micro VTX Clover Antennas from Battle RC with VSWR less than 1.5. The "Clover Leaf" design of the antenna gives you great 360 degrees of FPV coverage. Every piece of the antenna has been strictly tested in and after production. Specifications:Impedance: 50ohmVSWR: <1.5Frequency: 5.72GHZ, 5.74GHZConnector: IPEX Weight: 2g±0.3Length: 70mmType: RHCP

    $7.00 $4.55, Save 35% OFF

    SKU:4LAIC

    Weight: 0.10 kg

  • MFD 5.8G 23db High Gain Flat Antenna Panel

    Specifications:- Size: 31*31*3cm- Weight: 860g- SWR: <1.5- Frequency: 5180-5850Mhz- Interface: RP-SMA Plug- Cable length: 16mm- Color: White

    $74.63 $59.70, Save 20% OFF

    SKU:MFD23PA

    Weight: 1.20 kg

  • Tarot 5.8G FPV Telemetry Antenna Set TL300K

    TAROT 5.8G FPV 3/4 leaf A/V Tx Rx Wireless Antenna TL300KItem includes:5.8G 3-leaf antenna for TX*1  (Φ33x82mm) 7.8G 5.8G  4-leaf antenna for RX*1  (Φ33x82mm) 8.3GFeatures:Circularly polarized Omni antenna made with pure copper, silvering feeder and RP-SMA connector to avoid signal attenuation, ensure the excellent performance. Light weigh design makes it 7.8g only. The 90 degree connectors ensure the antenna perpendicular to the ground.Specifications: Transmitting frequency: 5800MHz Tx Antenna: 3-leaf Rx Antenna: 4-leaf Gain: 2.0dBi-2.5dBi Standing-wave rate: <1.5 Direction: Omni antena  Horizontal lobe width: 45° Vertical lobe width: 45° Polarization mode: circularly polarized Impedance: 50Ω Connector: 90 degree RP-SMA Material: 98% pure copper Feeder: silvering copper anti high temperature cableSuitable for: TAROT Mini 200/250/300 quadcopters or other similar FPV machine.

    $8.99

    SKU:TL300K

    Weight: 0.10 kg

  • Aomway 5.8g 4-Leaf Clover RHCP Antenna for TX/RX

    This Aomway 5.8GHz 4 leaf polarized antenna is a great way to increase the performance of your FPV system.The circular polarization helps reject “multipath interference”, a common problem with standard dipole stock antennas.Proven to increase range and video clarity, circular polarized antennas have become the standard after-market essential upgrade for modern FPV systems. This is a matched Tx/RX pair for direct installation to any FPV set with SMA connectors.Each antenna has extra reinforcement around the base of the clover leaf assembly making them less suceptible to damage.FeaturesSpecially designed for VTX/RX for long range FPVOmni directional (compatible with video TX/RX)Robust constructionSpecificationsFrequency Range: 5725~5875ghzSWR: <1.5Gain: 3dbiConnector: SMA-Blue / RP-SMA- RedColor: Blue / RedDimensions: 86 x 29mmPolarization: Right hand

    $7.98 $7.02, Save 12% OFF 1

    SKU:A584LA-S

    Weight: 0.10 kg

  • FPV 1.2g/2.4g/5.8g VTX/RX Antenna extension cable sma to sma jack

    Length:20cmNote:this antenna can be used for all of the 1.2g/2.4g/5.8g frequency.Specially designed for 1.2g/2.4g/5.8g VTX/RX antenna extension,sma to sma jack interface.BY the antenna extension cable,you can get a better arrangement for your cabin equipments.Reduce the interference of equipments with each other and it wont reduce the power of  antenna.

    $4.50 $4.37, Save 3% OFF

    SKU:1G2AE

    Weight: 0.10 kg

  • FPV 1.2g/2.4g/5.8g VTX/RX antenna extension cable rp-sma to rp-sma jack

    Length:20cm Specially designed for 1.2g/2.4g/5.8g  VTX/RX antenna extension,rp-sma to rp-sma jack plug.Can be compatible with most VTX/RX on the market.BY the antenna extension cable,you can get a better arrangement for your cabin equipments.Reducing the interference of equipments with each other and it wont reduce the power of  antenna.

    $4.50 $2.16, Save 52% OFF

    SKU:5G8AE

    Weight: 0.10 kg

  • 5.8Ghz 9dBi High Gain Antenna RP-SMA Connector

    9 dBi 5.8gHz antenna.360 degrees horizontal, 50 degrees vertical beam RP-SMA connectorLenght : 39 cm

    $9.90

    SKU:5G8A9D

    Weight: 0.20 kg

  • 5.8G 14dbi Panel Antenna Directive Antenna for FPV

    Specification:- Size: 145x97x38 mm- Weight : 0.5 KG- Frequency:5100 - 5850- Band width:750 Mhz- Gain: 14 dbi- Horizontal angle: 30 degree- Vertical degree:43 degree- SWR:1.5- Antenna inpedance:50ohm- Polarization method:vertical- Max power: 100 watt- connector plug:RP-SMA

    $45.00 $37.80, Save 16% OFF

    SKU:5G8PA14D

    Weight: 0.40 kg

  • 5.8Ghz 18dBi Outdoor FPV Panel Antenna For RC

    5.8G 18dBi Panel antennakeep clear video signal from further distance5.8Ghz Mini 18dBi Outdoor Panel antennaFrequency Range-MHz : 5100-5850bandwidth-MHz : 750Gain-dBi : 18Vertical Beamwidth - : 20°Horizontal Beamwidth - : 20°Ratio-dB : 25VSWR : 1.5Impedance- : 50Polarization : VerticalMaximum Power-W : 100Connector : SMADimensions-mm : 190 × 216 × 50Weight-g : 1.1Mounting Mast Diameter-mm : 40 ~ 50

    $39.53

    SKU:5G8PA18D

    Weight: 1.10 kg

  • FPV 5.8GHz Petals TX/RX Clover Mushrooms Antenna Set

    FPV 5.8GHz Petals Clover Mushrooms Antenna Set right angle threaded needle/threaded bore ( TX + RX ) Most cost-effective antenna,With a light weight plastic cover to protect the Antenna. Improve the aesthetic.The group antenna TX and RX ,TX is for the transmitter, RX is for the receiverDeascription:- Brand: Happymodel- Configuration: TX x 1 + RX x 1- Interface: B2+B4 threaded needle/A2+A4 threaded bore - Weight:43g A1+A3 or B1+B3 Only accept the reservation,if you need,you can contact us

    $22.50 $9.90, Save 56% OFF

    SKU:58CMAA2+A4

    Weight: 0.20 kg

Find us on Google+ Watch us on Youtube Like us on Twitter Follow us on Facebook

Home   |   About Us   |   New Products   |   Multi-Rotors   |   FPV Airplanes   |   FPV Equipment   |   Battery / Chargers   |   Tools & Accessories   |   Contact Us   |   Blog   |  Site Map

Product Tags: ABCDEFGHIJKLMNOPQRSTUVWXYZ0-9

Copyright © 2015 FPVMODEL.COM®. All Rights Reserved.