• TAROT ZYX-OSD On-Screen-Display Video Overlay System for FPV TL300C

    Product Description:- ZYX-OSD aircraft in flight can be basic flight information such as altitude, speed, attitude angle, battery, pressure, aircraft and return point distance control mode, runaway protection status, superimposed on the video information, make sure you enjoy the flight to bring all the fun.- ZYX-OSD also has data logging capabilities, the flight data is stored into the MINI-SD card, allowing you to perform data analysis, black box play a role at a critical time. Please first use, to ensure that mini-sd formatted as FAT32 format.- ZYX-OSD has two-way video input, video input source can be switched by remote control, the video standard PAL and NTSC can be automatically identified.Please note: ZYX-OSD must be used in conjunction with ZYX-M flight control system.Specification:Input voltage and current: 12V (80mA) ( not power to external device)Output voltage and current: 12V (1.5A) and 5V (2.0A)Size: 53mm * 36 mm * 10 mmWeight: 18gVideo format: PAL / NTSC (automatic recognition)

    $30.00 $9.00, Save 70% OFF


    Weight: 0.10 kg

  • Micro MinimOSD w/ KV Team MOD

    The MinimOSD was engineered to bring users a very powerfull OSD. It’s a nice and tiny board perfect for mini quads. With all the features of the very popular minimosd KV Team modded OSD but in a tiny 15x15mm size.Apart from the size, the only differenece is that it does NOT have the DC/DC converter - this means less heat when powered off a flight controller. The micro MinimOSD has been modified to take advantage of custom firmware options. You can flash firmware that is MAVLink compatible for ArduCopter, or MultiWii Serial compatible for MultiWii and Baseflight/Cleanflight control boards. You can connect two batteries up to 4S so you can see the main flight battery voltage.  The second port will allow a separate FPV battery voltage on the display as well. There is also a pin for analog or digital PWM RSSI and a connection where you can attach a current sensor.Features:- All the same features as the orgnal, but less the half the size - NO Dc/Dc convert . power board via 5 volts - FTDI cable compatible pinout- Standard 6-pin ISP header- Two LED indicators- ATmega328P with Arduino bootloader- MAX7456 monochrome on-screen display- 15x15MM Size!- Modifications for direct connection of two batteries (up to 4S)- Pad for an Analog or Digital PWM RSSI signal - Pad for the connection of a Current Sensor- ATmega328P with Arduino bootloader- Standalone, or with APM/ Flip / Flip32+ flight controllers - These modifications allow direct connection of two batteries (up to 4S)SpecificationsATmega328P with Arduino bootloaderMAX7456 monochrome on-screen displayFTDI cable compatible pinoutStandard 6-pin ISP headerTwo independent power sections with an LED indicator on eachSolder jumpers for combining the power sections+5V 500mA regulator for up to +12V supply inputSolder jumper for PAL video optionExposed test points for HSYNC and LOSDimensions: 0.7"W x 1.7"L (2.4" w/ pins as shown) x 0.3"H

    $12.95 $7.51, Save 42% OFF


    Weight: 0.10 kg

  • MFD Teleflypro OSD for MFD AAT System

    TeleFlyPro Works with AATDriver V5.It Supports VBI+Audio downlink. We get less tracking latency and more reliability.It use a barometer instead of GPS to measure the altitude. So AAT will track better in tile angle.MFD TeleFlyPro is an enhance unit for MFD AAT(AutoAntennaTracker) system.The main function of TeleFlyPro is to modulate the tracking data into Video and Audio signals. These video and audio signals can be transmitted via a common Video-TX /RX module. With a V5.0 or newer AATDriver, the AAT system is able to demodulate the tracking data from the video or audio signal and use it to track the plane.TFPro’s advanced features include:1) Modulating tracking data both into video and audio signals. It’s more reliable and works with most VTX/RX without audio channel compatible issues.2) TFPro has advanced ,pixel-level black/white OSD function. OSD can be disable if it’s not used.3) TFPro uses a barometer to measure the altitude instead of GPS. The tracker now tracks more accurately than before.4) An optional 100Amp current sensor is available if user needs to measure the current/voltage of the power system of the plane. If you need a full-function AutoPilot device for you plane, we recommend our MFD AutoPilot product.



    Weight: 0.20 kg

Find us on Google+ Watch us on Youtube Like us on Twitter Follow us on Facebook

Home   |   About Us   |   New Products   |   Multi-Rotors   |   FPV Airplanes   |   FPV Equipment   |   Battery / Chargers   |   Tools & Accessories   |   Contact Us   |   Blog   |  Site Map


Copyright © 2015 FPVMODEL.COM®. All Rights Reserved.