This is the new Micro Swift 2 from Runcam with some new features comparing to the 1st generation Runcam Micro Swift. One touch setting with 5 preset scenes, easy to switch the colors to suit your flying environment. No more headache to set with your OSD. Low voltage alarm: The Micro Swift 2 comes with Vbat. You can change the voltage, or set a lowest voltage value. When the actual voltage is lower than what you set, it will warns you by changing the color.Parameters:Package:
Review: Write a Review
Weight: 0.10 kg
Eagle 2 is the new improved version of Runcam Eagle FPV camera. Many reviewers including Bruce of RCModelReview, Oscar Liang and Joshua Bardwell agreed that it’s probably one of the best FPV cameras out there in terms of image quality and WDR capability. Here are the improvements based on the reviews by Oscar Liang:Lower latency, now it’s similar to the CCD cameras such as Arrow and Swift.Cheaper than the Eagle (in the $40-$50 range)Over-sharpening and noise issue has been resolved in the default settingsSingle PCB rather than doubleUsing a 2-wire OSD controller like other FPV cameras, rather than the previous 6-wire oneSpecificationsInput Voltage: 5V-36V (2S – 8S)Aspect Ratio: 4:3 or 16:9 (at purchase)FOV: 4:3 – 140°, 16:9 – 130° (same as previous version)Latency: 33msIR Block LensNTSC/PAL switchableWeight: 18.9gDimension: 28mm x 26mm x 28mmParameters
Only 5.6g, the Runcam Micro Swift is possibly the worlds smallest and lightest CCD FPV camera.Runcam is on fire recently: not long after they released the compact FPV camera Swift Mini, they are breaking the world record again with the Micro Swift! It only weighs at a shocking 5.6g! Do not let the tiny form factor fool you, the Micro Swift have the same performance as the original Swift and Swift Mini.SPECIFICATIONS:1/3″ SONY Super HAD II CCD600TVL2.1mm Lens (M8)PAL/NTSCInput voltage: DC 5V-36VWeight: 5.6g19mm*19mm*19mmPackage Included:1 X Camera1 X 1.25mm 3pin to 1.25mm 3pin FPV silicone cable1 X 1.25mm 3pin to 1.0mm 3pin FPV silicone cableParameters
SpecificationCCD: 1/3” Sony SUPER HAD II CCD Pixel PAL: 976(H) x 494(V);NTSC: 768(H)×494(V) TV System: PAL/NTSC(according to country) Resolution: 650TVL(b/w), 600tvl(color) OSD: Edit Name, Power, Flying time Synchronization: internal synchronize Shutter Speed (CCD IRIS): PAL: 1/50~1/100000 sec; NTSC: 1/60~1/100000 sec Noise: > 60 (AGC OFF) Video Out: 75ohm, synchronize Min. Illumination: 0.01Lux Auto Gain: Off/Low/Mid/High Back Light Compensation (BLC): Off /Back light compensation/ Strong light suppression Private shading (PRIVACY): 1~8 private shading area Motion Detection (MD): On/ Off (Multi level sensitivity settable) Auto White Balance: Manual / Auto / Auto track Mirror: Horizontal Mirror optional Negative: Positive / Negative optional Color to B&W: Auto DNR: 2DNR WDR: D-WDR Day / Night Shift: Auto/ Color/ B&W Menu (OSD): English menu White Dot Repair: Support Image Adjustment: Support Camera Title: Support Power Requirement: DC5V~35V Working Temperature: -10 C ~ 50 C Working Humidity: 20~80% Storage Temperature: -40 C ~ 60 C Storage Humidity: 20~95% Dimensions(mm): 26X26(W*L) Power Consumption: 70mA Color: Blue only
Weight: 0.15 kg
Looking for a small fpv camera for your 3" builds? here is the Swift Mini. Smaller size, wider voltage, but the same image quality! If you ever had your props hit and destroy your camera on your quad, then this mini cam is the right one for you. Much more space between the props using this Runcam Swift Mini.Features:SONY Super HAD II CCD image sensor (1/3″);600TVL horizontal resolution;Optional:2.3mm wide angle lens;Wide input voltage rage, DC 5V to 36V;Excellent light senility, 0.01Lux/1.2F min. illumination;Electronic shutter speed for NTSC video standard is 1/60 to 1/100,000sec;Digital Wide Dynamic Range (D-WDR);Digital Noise Reduction (2DNR);OSD menu;Auto Day/Night mode;CVBS (RCA) video output for real-time image transmission:Ultra compact design, 22.3mm x 22mm x 27mm;12g net weight.
Review on Runcam Swift-2 by Bruce of RCMODELREVIEWJust when you think all your FPV cameras are up to date and the best there is, Runcam brings out another offering that delivers even more functionality for just a little extra cash. The Swift 2 is worth it if you dont have any kind of effective telemetry on your models or if you want to save the weight, space and added complexity associated with a regular OSD.Pros:you get a pretty accurate voltage displaythis is a nice SuperHAD II CCD camera with WDRan excellent operating voltage rangesuper-good wiring (very flexible silicone)the extension lead makes camera adjustments easy-as.choice of cases can ease installationCons: you are probably going to have to buy one.Description :Model: RunCam Swift 2Image Sensor: 1/3" SONY Super HAD II CCDHorizontal Resolution: 600TVLLens: 2.3mm 150° Signal System: NTSC/PAL (Optional)Integrated OSD: YESIntegrated MIC: YESS/N Ration: >60dB(AGC OFF)Electronic Shutter Speed: PAL:1/50~100,000; NTSC:1/60~100,000AutoGain Control(AGC): YESBack light compensation(BLC): YESMin.illumination: 0.01Lux/1.2FWDR: D-WDRDNR: 2DNRDay/Night: Color / Auto / B&WPower: DC 5 to 36VNet weight : 14gDimensions: 28.5mm * 26mm * 26mm
Please note that SCAM302 3D camera is a replacement part of Skyzone SKY02S V+ FPV Goggles. It may not be compatible with other goggles or products.SCAM302 3D camera Specifications:Fov:120 degreesF/No=2.3IPD:40mmResolution:720*576Video format: PAL / NTSC ( optional )Video Output Level:1.0Vp-p Typ./75ohmPower Supply:DC 5.0V/0.5APower Consumption:1.6WDimensions:56.5*17.8*14mmWeight:12gOperating Temperature: 0℃～+60℃
$45.99 $42.31, Save 8% OFF
Time to get your micro builds going! The FX797T Micro FPV Camera & 5.8GHz 40CH 25mW VTX is extremely small and could be installed on almost anything, most multi-rotors wouldn’t even notice it was there. This camera / VTX combo is the perfect FPV plug & play solution for micro setups.Due to their size and adaptability, the FX797T micro camera and video transmitter has taken the FPV world by storm. This fabulous little piece of tech allows the user to install on the smallest of builds and get reception up to 100 meters in range. The design of this camera/vtx is intended to be small enough to mount on almost any micro flyer out there and it has found it’s home in the Tiny Whoop/Blade Inductrix quad to be it’s calling. Featuring the full range of 40 Channels this camera outputs all common video signals including the latest “race band” channels. Combined with it’s low amp draw this camera is perfect for those tiny builds that are already using the smallest of batteries. Easy to install and easy to wire up (just gnd and power lines) this camera will simplify your build. Description:Item Name: FX797T Micro FPV Camera & 5.8GHz 40CH 25mW VTX FX797 Output power: 25mWInput power: 2.5–5V Current Consumption: 230mAAV Output: VGA 640x480 PAL/1VP-PCamera resolution: 600TVLMin illumination: 1 luxField of view: 120° viewing angleAntenna dimensions: 20mm X 25mm diameterAntenna: 3 lobe right hand circular polarizedVideo output: NTSCFrequency: 5.8GHz 5 bands 40 channels, with Raceband: 5658-5917MHzBands: see below channel table.Push button operation, long press for band, short press for channelSpecs:2 Row LED indicators, 5 LED for band, 8 LED for channelSize: 17x17.5x12.5mmWeight: 3.4gFeatures:Micro Size and Light weightEasy installation for racing droneFive bands 40 channels with RacebandButton Control Instead Of SwitchIncluded:1 x FX797T 5.8G 25mW Transmitter With 600TVL Camera and Antenna1 x manual
$41.99 $26.87, Save 36% OFF
* These are the new updated version of HS1190 that just received from the manufacturer.The NEW Foxeer Arrow V2 HS1190 is the advanced version of the Foxeer HS1177. It features an excellent wide dyanmic range function and supports DC5-35v wide voltage range. It also has an inbuilt OSD and MIC.This is Version 2 (V2) of the Foxeer Arrow, and as a result boasts multiple improvements over the V1. Those improvements are:1. Three independently controlled OSD parameters: User name, timer and voltage. Their positions can be moved.2. OSD flashing issue has been fixed.3. Upgrade to a better power module, features up to 35v direct plug-in.4. Upgrade to 7-Pin to monitor battery consumption.5. Voltage callibration function. If the voltage is not the same to real power, it can be adjusted by OSD.6. The cable connector (2-Pin) is short and matches an extend cable (could be removed), which makes OSD setup a breeze.This Foxeer Arrow V2 HS1190 FPV Camera comes standard with a 2.8mm lens, and IR Block filter. You may purchase a 2.1mm or 2.5mm lens as well. Features:600TVL1/3 Sony Super HAD II CCDBuilt in FPV OSD (Votlage, Flight Time, Name)Built in AudioWide Dynamic Range (D-WDR)Wide Voltage Range DC5V-35VVarious Installation Options2.8mm & PAL IR-BlockColor: Black / Orange (Optional)Note: The 2.1mm, 2.5mm and 2.8mm lens fit for both HS1177 and HS1190 camera. Pls note that both 2.5mm & 2.1mm lens were IR-sensitive.Warning: Always use a LC filter or an electrolytic capacitor when connecting this camera. New generation ESCs like the DYS SN20A or the FVT Littlebee 20A can cause voltage spikes of up to 40 Volt with Damped Light / braking activated.New 1-Pin input (VSEN) for monitoring the battery power. The voltages showed on OSD are different when connect / disconnect to the VSEN pin.
$39.90 $34.31, Save 14% OFF
Specification:- Sony 1/3" HD sensor- 1200TVL 960P HD CCD- NTSC/PAL format adjustable via jumping- Low luminance sensor, better compatiblity with different environment- Zinc alloy case, weight only 22g.- Small unit size 26*25mm- 4.5-5.5V working voltage- 230mA working current- 2.8mm color lens- With Doupont and JST connect cable- With fIxing mount, convenient to adjustPacakge inlcuded:- 1* AOMWAY 1200TVL mini camera
$49.99 $42.49, Save 15% OFF
Weight: 0.20 kg
Specification:Resolution: 520TVL LinesVideo format: NTSC/PALSensor: NTSC=720(H)x480(V) PAL=720(H)x576(V)Optical format: 1/4 inch HD Color CMOSLens angle: H:120 degree/V: 100 degreeWorking voltage: 3.3~5VWorking current: 80mADimension: 24*22*10mm±2mm (inculde camear mount)Working temperature: -10~60 CelsiusWeight: 4g (includes cables and camera mount)
Features:1.Full HD 1080p 30fps2.Built-in 4 Bands 32CH 5.8Ghz 400mw transmitter3.LENS Rotation range: ±45 degrees4.FOV angel: 150 degrees (Diagonal) 5.Support PWM remote control6.Support OSDSpecifications:Latency: about 0.15s Weight: 56.9g (w/transmitter, w/o cables)Function Diagram Precautions:- Please make sure the DV battery is full recharged before use- Please connect the Micro 5Pin USB cable to the DV and the other end to the 5V power source( Power adapter, PC or power-bank )- It’ll take about 90mins to recharge. Charge Led is in red while charging and in green after fully charged.- The PWM remote control feature fulfill with a 3 Switch of the remote controller.- The PWM remote control feature fulfill with suited LCD display products.Power Key/Led - Long press Power button for 3 seconds to turn on the PWM remote Control and blue led flashes. Short press again to turn on the camera and in camera review mode.(Blue Led off after turning on and Red constant light)- Short press once to enter system menu under Review mode- It’s ESC button in menu mode- Long press 3 seconds to turn off the device.Photo Key- Short press once to capture a photo in review mode.- Short press once to capture a photo in recording mode.Record Key- Short press once to start recording in review mode and press to stop recording.- Long press 3 second in review mode to enter playback mode.- It’s OK button in menu mode.UP key- Short press once to setup the Bands- It’s UP button in menu modeDown Key- Short press once to setup the channels- It’s Down button in menu modeRecord Mode- Red LED flashes while recording and REC icon in red- Video files will be auto saved (reach setup video length)and create a new file to continue recording.(recording time will be displayed on the screen until stop recording)- It’s OK to capture photo while recordingRemote Bands/Channels Setup- Connect 3P remote control cable to one of PWM Channel of the receiver and other end to the S1 port on the camera- To assign a Channel to Bands/Channels Setup and assign another 3 switch, C-H for Bands, C-L for channels Remote camera control ( fulfill with suited LCD display products)- Connect 3P remote control cable to one of PWM channels of the receiver and the other end to the S2 port of the camera- To assign a channel to camera remote control port S2- Connect the LCD monitor remote control output port to the PWM input of the remote control. Then you can operate the camera via the LCD monitorExternal OSD Device- Press both UP/DOWN button at the same time in review mode to switch the camera to OSD transmitter mode. Then the video output to the external OSD and then back to the camera- Press the two buttons again back to normal video transmitter modeMenu ListSpecifications
$99.00 $93.06, Save 6% OFF
Weight: 0.40 kg
Find us on Google+ Watch us on Youtube Like us on Twitter Follow us on Facebook
Copyright © 2015 FPVMODEL.COM®. All Rights Reserved.