Converters Top 10

Sorted:
  • M3*6/M3*10/M3*25 Inner Thread Round Aluminum Pillar Spacer for Multicopter 10pcs

    M3*6/M3*10/M3*25 Inner Thread Round Aluminum Pillar Spacer for Multicopter 10pcsSpecifications:- Material: Aluminum alloy, deep red anodizing.- Inner thread M3- Length: 6mm/10mm/25mm (optional)- Outer Diameter: 5mm- Quantity: 10pcssuper light material,good hardness,designed for connecting rod,pull rod,shore etc.

    Review: Write a Review

    $4.90 $3.04, Save 38% OFF

    SKU:10-CTM306

    Weight: 0.10 kg

  • RP-SMA Male to SMA Female Adapter

    A convenient adapter for RP-SMA female connector converts to SMA male connector.

    Review: Write a Review

    $1.99 $1.93, Save 3% OFF

    SKU:SJTSF

    Weight: 0.05 kg

  • Mini HDMI Female To Micro HDMI Male Adapter

    This is what you need that Mini HDMI Female to Micro HDMI Male Adapter,3 grams only.

    Review: Write a Review

    $4.99 $3.59, Save 28% OFF

    SKU:HCMFTM

    Weight: 0.10 kg

  • 30CM FPV Super Soft HDMI Cable Mini Interface to Standard Interface

    Features:- Super soft HDMI cable- Length: 30cm- Mini interface to Standard interface- Perfect suit for SONY 5N camera FPV aerial photography30cm, 5g only.Used for Sony 5N or other cameras

    Review: Write a Review

    $17.90 $12.17, Save 32% OFF

    SKU:HCMTS30

    Weight: 0.10 kg

  • RMILEC T4363NB18 Adapter Converter Board For Sbus Receiver

    In order to connect with SBUS receiver easily ,T4363NB18 adapter supports 5V power supply. It can be used not only hanging up in 12FG or 14MZ but also individually placed in other locations as a relay station.

    Review: Write a Review

    $18.90 $14.74, Save 22% OFF

    SKU:RSBUSRC

    Weight: 0.20 kg

  • RMILEC high-precision PWM/PPM/SBus Signal Converter V2

    RMILEC high-precision PWM/PPM/SBus Signal Converter V2FeaturesPWM PPM SBUS signal conversionMode 1 PWM Input :Converts the input PWM signal into a corresponding PPM signal and SBUS PPM signal output.Mode 2 PPM Input: Converts the input PPM signal into a corresponding PWM signal and SBUS signal output.Mode 3 SBUS Input:Converts the input SBUS signal into a corresponding PPM signal and PWM signal output.Conversion rulesPWM port support 1-18CH input and 18CH output.PPM port support 1-18CH input and 5-18CH output.SBUS port support 18CH input and 18CH output. If the CH quantity of output signal more than the CH quantity of input signal,converter will populate useless CH  with 1.5MS data.Under SBUS input mode,PPM port only has 10CH output.(PPM signal of more than 10CH has too large delay,so it’s useless)After power up,the converter will wait 10 or more signal cycles to determine the input signal is stable,if there is no signal input then the LED will blink slowly .while the converter working normally, if the input signal is lost then the output is automatically filled up with 1.5mS data,and the LEDs blink rapidly. Setting Press and hold the button then power up , three LED flashes several times later release the button,then enter the setting mode. Press the button , PWM - PPM - SBUS cycle selected , the corresponding LED lights up to indicate. Setting data are automatically saved. Cycle power to use .SpecificationInput voltage :3.3-12VSupport Reverse battery protection ( protect the converter but does not protect the servo )Accuracy :4000count per 1 ms  (10PPM source )Signal Generator: Hardware not interrupt programJitter:none

    Review: Write a Review

    $13.99

    SKU:RLPPSSC

    Weight: 0.10 kg

  • 3 Channel Video Switcher Module 3 way Video Switch Unit for FPV Camera

    Descriptions:- This is a 3 channel Switchover module,adopts high speed video switch chip,effectively reduce the vibration of the Video image. - compatible with 3 position Switch Channel- Port "in" is video signal input,IN1,IN2,IN3,OUT is video output- "-" is negtive pole,"+" suspend,"S" is receiving Video signa- Size: 4.5*1.8*0.5- Input voltage:4.8-6v- Input channels:3- Output channel: 1- Video signal impedance: 75Ω* The control channel can be any proportional channel or 3-position switch channel. (2-position switch channel can only switch within two video input signals)Video signal connector sequence: "-" for negative, "+" not used, "S" for video signal

    Review: Write a Review

    $9.90 $8.61, Save 13% OFF

    SKU:3CVSM

    Weight: 0.05 kg

  • LPF1400 1.2Ghz Low Pass Filter for solving the issue with 2.4GHz RC Systems

    1.2GHz Low Pass Filter attenuates RF noise which interferes 2.4Ghz RC receivers, tiny and useful, a very nice filter. Helps 1.2GHz Wireless Video Transmitter to prevent unwanted RF noises. 12LPF 1.2G Low pass filters can reduce the interference to 2.4GHz receivers to prevent jitter servo issues. You may install it onto your receivers or transmitters, for filtering out unwanted RF noises1.2Ghz Low Pass Filter for solving the issue with 2.4GHz RC Systems Designed for 910MHz - 1390MHz Wireless A/V transmittersLow insertion loss, less than 0.7dB typical at 1300MHzPassband DC - 1425MHz (<-1.5dB loss)Efficient monolithic LC multi-pole topography designSecond harmonic (> 2.4GHz) attenuation -35dB typicalSMA connectors (male / female)Characteristic impedance 50 ohmHandles RF power up to 8 wattsSmall size, 1.45 x 0.31 x 0.25 inches (37 x 8 x 6.5 mm)Lightweight, 5.45 g

    Review: Write a Review

    $22.90 $12.82, Save 44% OFF

    SKU:LPF1400

    Weight: 0.05 kg

  • Mini HDMI to AV Converter

    This Mini HDMI to AV Converter allows you to connect any item having an HDMI output to a TV or monitor having composite video and stereo audio inputs. The input can be any item having an HDMI output.This Mini HDMI to AV converter uses the latest low power circuitry and can be powered through the HDMI cable using the power supply facility built into most standard HDMI output connections. (Some older HDMI equipment may not have this facility, so a USB socket is built into the converter allowing the use of an external power supply if necessary.)The input connection on this device is a standard full size HDMI socket. The output is a standard RCA or Phono connector for video and two RCA or phono sockets for audio. Either PAL or NTSC outputs can be selected by means of a switch on the side of the product.Dimension: 6.6cm x 5.5cm x 2.0cmWeight: 40gYou purchase includes:Mini HDMI to AV converter(PAL/NTSC selectable)USB power cableUser Manual

    Review: Write a Review

    $13.80 $9.94, Save 28% OFF

    SKU:MHTAC

    Weight: 0.20 kg

  • Skylark AAT convert module for other brand OSDs

    AAT convert module for Skylark AAT and other brand OSD Its very easy, Plug And Play.

    Review: Write a Review

    $28.00 $23.80, Save 15% OFF

    SKU:SLAATCM

    Weight: 0.10 kg




Find us on Google+ Watch us on Youtube Like us on Twitter Follow us on Facebook

Home   |   New Products   |   Multi-Rotors   |   FPV Airplanes   |   FPV Equipment   |   Battery / Chargers   |   Tools & Accessories   |  Site Map

Product Tags: ABCDEFGHIJKLMNOPQRSTUVWXYZ0-9

Copyright © 2015 FPVMODEL.COM®. All Rights Reserved.