Sorted:
  • BattleRC Pagoda 2 5.8GHz Antenna RHCP SMA / RP-SMA Optional 2pcs

    The Pagoda 2 from Battle RC is specially designed 5.8G fpv antenna on the basis of Maarten Baert circularly polarized antenna drone racing design. It is good for both video TX and video RX. The structure is made of 3 layers of PCB board, which integrated one ounce copper foil.Maarten Beart Website (Creator for the Pagoda): http://www.maartenbaert.be/quadcopters/antennas/pagoda-antenna/The Pagoda 2 5.8G antenna is an omnidirectional circularly polarized antenna design. The main advantage of Pagoda 2 antenna is the rejection rate of the dual circular polarization waves. The Pagoda 2 is manufactured according to the Maarten Baert optimized circular polarized antenna design. It consists of 3-layer PCB in which embedded 1 ounce copper foil, replacing the original typical of the wire structure components. This antenna weighs only 8g, heavy polyolefin heat shrinkable material wrapped to the PCB can well protect PCB. Its simplified manufacturing process keeps costs low allowing for a great low price for an antenna with high performance.Price for two pieces of Pagoda 2 antenna, one is with a size of 50mm, the other is 80mm.Features:Good omnidirectional radiation pattern.Good axial ratio.Reasonably small.Easy to manufacture within fine tolerances at low cost, even for a hobbyist.Specifications : Brand: BattleRCType: RHCPGain: ~2dbicAxial ratio: < 1.3Bandwidth: 5.5GHz-6.05GHzRadiation Efficiency: 95%SWR: S11 < -20 dB, VSWR < 1.22 (at center frequency)Size: 80mm / 50mm Cable: Semi-rigid RG402Connector: SMA / RP-SMA optionalWorks great as both a transmitting or receiving antennaCompatible with other styles of 5.8GHz antennasPackage Includes:1 x 50mm BattleRC Pagoda 2 5.8g RHCP Antenna 1 x 80mm BattleRC Pagoda 2 5.8g RHCP Antenna 

    Review: Write a Review

    $13.50 $12.69, Save 6% OFF

    SKU:MBPA

    Weight: 0.10 kg

  • Matek 5.8G 40CH 25/200/500mW Switchable Video Transmitter VTX-HV With BFCMS Control

    Mateksys is expanding their product range and releasing their own video transmitters. The first one is Matek VTX-HV. It is separate half size of a normal FC, stackable board with OSD. ‘HV’ probably stands for High Voltage, as this VTX works directly from up to 6S HV LiPo battery. Has 5V output for camera, audio input, iPEX antenna connector, LED’s for channel band and power indication and traditional button control.Specifications & Features:Input voltage: 7~27V(2~6S LiPo)40 standard channels, A/B/E/F/R BandOutput Power: 25, 200, 500mW switchableBEC Output: 5V/1A for Camera or FCTraditional button+LED control of frequency and powerBFCMS (BFOSD & LUA Script) control via FC UART _TXFirmware upgradeablePower Consumption: 3.1W Max. @ 500mWVideo Input Impedance: 75 OhmAudio Subcarrier Frequency: 6.5 MHzRF Connector: U.FL (IPEX)Video Format: NTSC/PALWeight: 6g (Tx only, w/o SMA cable)Size: 36*22*6.5mm w/30.5mm mountingIncluded:5.8G Video transmitterIPEX to SMA Female, RG178 cable 10cmIPEX 5.8G whip antenna, RG178 10cmPVC Heat-shrink tube

    Review: Write a Review

    $29.90

    SKU:VTX-HV

    Weight: 0.10 kg

  • RunCam Micro Swift 2 FPV Camera

    This is the new Micro Swift 2 from Runcam with some new features comparing to the 1st generation Runcam Micro Swift. One touch setting with 5 preset scenes, easy to switch the colors to suit your flying environment. No more headache to set with your OSD.  Low voltage alarm: The Micro Swift 2 comes with Vbat. You can change the voltage, or set a lowest voltage value. When the actual voltage is lower than what you set, it will warns you by changing the color.Parameters:Package:

    Review: Write a Review

    $34.99

    SKU:RCMS2

    Weight: 0.10 kg

  • BattleRC 5.8G FPV Micro VTX Clover Antenna 70mm

    A new must for FPV. These are the 5.8G FPV Micro VTX Clover Antennas from Battle RC with VSWR less than 1.5. The "Clover Leaf" design of the antenna gives you great 360 degrees of FPV coverage. Every piece of the antenna has been strictly tested in and after production. Specifications:Impedance: 50ohmVSWR: <1.5Frequency: 5.72GHZ, 5.74GHZConnector: IPEX Weight: 2g±0.3Length: 70mmType: RHCP

    Review: Write a Review

    $6.98

    SKU:4LAIC

    Weight: 0.10 kg

  • MFDlink / Rlink 433MHz Long Range UHF 8CH SBUS RX

    MFDLINK / Rlink 433MHz Long Range UHF 8CH SBUS RX. Specifications:8CH standard channel, can be extended to 16chDimension: 45*30*6mmWeight: 16gWork Voltage: 4-6VWork Current: 75mA@5VPackage Included:1* Receiver2* Receiver antenna  (Available in white and black , we will send them to you at random.)You might also like: Rlink V2 433MHz 16CH Long Range UHF TX and 8CH SBUS RX ComboCaution: Make sure the wires are correctly connected, or it will cause damage.

    Review: Write a Review

    $45.00

    SKU:R433-R

    Weight: 0.15 kg

  • RunCam Eagle 2 FPV Camera

    Eagle 2 is the new improved version of Runcam Eagle FPV camera. Many reviewers including Bruce of RCModelReview, Oscar Liang and Joshua Bardwell agreed that it’s probably one of the best FPV cameras out there in terms of image quality and WDR capability. Here are the improvements based on the reviews by Oscar Liang:Lower latency, now it’s similar to the CCD cameras such as Arrow and Swift.Cheaper than the Eagle (in the $40-$50 range)Over-sharpening and noise issue has been resolved in the default settingsSingle PCB rather than doubleUsing a 2-wire OSD controller like other FPV cameras, rather than the previous 6-wire oneSpecificationsInput Voltage: 5V-36V (2S – 8S)Aspect Ratio: 4:3 or 16:9 (at purchase)FOV: 4:3 – 140°, 16:9 – 130° (same as previous version)Latency: 33msIR Block LensNTSC/PAL switchableWeight: 18.9gDimension: 28mm x 26mm x 28mmParameters

    Review: Write a Review

    $44.99

    SKU:RCE2

    Weight: 0.10 kg

  • AOMWAY Commander 3D 40CH 5.8G FPV Goggles

    A new player on the goggle market, the Aomway Commanders V1 3D FPV goggles are a snug fit, the feedback so far on the optics has been great and it has several unique features that make them stand out. Switchable 4:3 and 16:9 aspect ratio, "black-box" style DVR recording (it starts recording as you turn on the goggles) are some of the simple yet cool things about these goggles. The integrated fan on the bottom of the goggles and integrated head tracking is also a nice touch.Main Features:- 2 x 16:9 854 x 480px WVGA display with 32-degree FOV - Two built-in 5.8G 40CH highly sensitive receivers- With HDMI connector, supports 720P- Supports 3D / 2D image, adjustment of IPD ( 59 - 69mm ) - DVR function, NTSC / PAL / Auto- Supports headtracker ( not included ) and installation of optical lenses ( not included )- Anti-fog fan, comfortable eye maskDisplay : Resolution : 854*480(WVGA)LCD, LED backlightRatio : 16:9,4:3FOV : 32°,glass opticalIPD : 59-69mm(adjustable) Support 3D, HDMI,DVR,Headtracker:3D Display : Video 3D;HDMI 3DAudio Output : stereo Format : NTSC/PAL AutoHDMIin : 720PDigital Video Record : Integrated simulation DVR(can record RF and AVIN siginal) , Support 32Gb micro TF cardVideo Compression Format : MJPG 30fps Headtracker : modularization (not included) Adjustable : Lightness/Contrast/Channel/Display Mode/Digital Record/Head Tracker Switch 5.8G 40CH Diversity ReceiverWith build in 2 40CH high sensitive receiver, auto search Interface : Headphone : 3.5mm 3 headphone jackAVIN Interface : 3.5mm 4 audio-video interface Headtracker Interface : PS2 terminalTF Card : Micro TF CardDCIN : Standard 5.5*2.1

    Review: Write a Review

    $345.99

    SKU:AWC3D

    Weight: 0.90 kg

  • RunCam Split Camera With WiFi Module

    Test on Runcam Split by Oscar Liang* Friendly Reminder: To ensure the best performance, please power the camera with a stable input. Most of the output power from VTX are not stable, it would be better power the camera with the 5V out from PDB.Runcam is known for keeping up with trends and making some of the best FPV cams on the market and this time theres no surpise that theyve done it again, except this time, its split! This is one idea that has been tackled by other companies before but none have gotten such great frame rates or clear footage. The split is just what its name sugguests and splits the camera from the main dvr processor that is built into most other cameras. This lets you use the camera for an fpv camera but also allows for an HD recorder capable of recording video at 1080p/60fps! The Runcam Split puts the camera where your typical fpv camera would go but puts the HD recorder on a stackable PCB style board that can fits directly over your flight controller, allowing for central placement of cg.FeaturesCan be used for  FPV flying while recording 1080p60fps and totally replace your FPV camera.Latency is as low as the RunCam EagleConnect the Split directly to a VTX so it works just like a FPV camera.PCB board can be stacked on top of the  FC/PDB, allowing for protection inside your airframeNo more HD camera mounting on top of the frame needed! Saves you 70g, COG is also more centralized.Included WiFi module for wireless settings control via phone app.Specifications: Downloads:User Manual (English)User Manual (Deutsch)User Manual (Chinese) Instruction diagram Module connection diagram Replaceable Lens Unit of length: mm

    Review: Write a Review

    $74.99-$77.99

    SKU:SPLIT-OR

    Weight: 0.10 kg

  • Dragonfly Low Profile Micro FPV Camera

    This is the micro FPV camera that we are using on the hot selling X-Racer X-1. Using this high quality micro FPV camera, we have saved some much needed space for this design and we are able to place the camera in a low profile position between the two forward motors allowing for a design that does not require the video system being mounted in a high profile top mount of the aircraft.Specifications:CCD 1/4 CmosSignal System PAL NTSCPixel P:720H×576 N:720×487Photosensitive area 1/4:4.077mm x 3.136mm Scanning frequency H:15.625KHz V:50Hz H:15.7343KHz V:60HzHorizontal clarity 800 TV LinesShutter Speed 1/50-1/100000(秒) 1/60-1/100000(秒)Min. Illumination 0.1 Lux / F1.2S/N radio ≥48dB(AGC OFF)Grayscale 10Gamma value 0.45Black level 0.06 Vp-pVideo output 1.0Vp-p 75ΩPower Requirement DC3.3-5VWorking Temperature -20℃~50℃ RH95% MaxPower Consumption 90MA

    Review: Write a Review

    $14.99

    SKU:FXRMC

    Weight: 0.10 kg

  • Dragonfly 25mw 48CH Micro VTX For X-Racer X-1 and KL-EX90

    FPVModel did not stop at the flight controller design. We have also designed a Drgonfly 25mw 48ch Vtx to mount flushly on top of the FC and give and even more aero dynamic low profile design for the video transmission. By using this low profile design were able to streamline the body of the X-Racer X-1 and allow for smooth airflow over the low slung canopy, allowing for smooth airflow over the top of the frame.

    Review: Write a Review

    $15.99

    SKU:GFVX1

    Weight: 0.10 kg

  • Skyzone SKY02S V+ 5.8G 40CH 3D FPV Goggles Only

    Skyzone SKY02S V+ 3D 5.8G 40CH FPV Goggles w/ VTX, 3D Camera, Head Tracking, HDMI, DVRThis is the latest version of Skyzone 3D 5.8G 40CH FPV goggles with VTX, 3D Camera, Head Tracking, HDMI and DVR that released in July 2016. Please take note that the option "Goggles Only" includes the goggles only without VTX and 3D camera.The new Skyzone SKY02S V+ 5.8G 40CH 3D FPV Goggles are an upgrade of previous Skyzone 3D Goggles. These new goggles remain all the features of previous versions, including 3D/2D mode, built-in DVR with playback, head tracking, built-in front camera etc, and add some new features like HDMI-IN, channel auto searching, new eyeshade with headband for a more comfortable wearing.SKY02S V+ FPV goggles are built-in with two 5.8GHz receiving modules, two antenna ports and two independently-working display modules, bringing you 3D FPV flight experience (SCAM302 3D camera and STX202 two-way transmitters required). The two lens of the 3D camera work in the parallel manner so that 3D effect can be enhanced for close shot and reduced for long shot, bringing people an overall vivid visual experience.SKY02S V+ FPV goggles can also work in routine diversity reception mode. In such mode, it displays common 2D images. Its radio channel and band settings may be compatible with STX202 and other 5.8GHz transmitters, and in total it supports bands and 40 channels ( see the Specifications Description for details )These goggles come as an all in one package so you don’t have to worry about purchasing a set of goggles then needing to buy a receiver or even yet a dual diversity receiver system that adds much expense to the overall cost of goggles. These goggles even come with a built in DVR just add a micro SD card and you are good to go. Head Tracking? Yep! It’s included! No need to go out and buy an expensive tracker if that’s what your into. When comparing these goggles to other goggles there’s not much of a comparison. The others are just goggles. Skyzone Sky02S V+ are the whole package! Save some of they money you would spend on building another set of goggles and spend that savings on something that can fly! Features:-3D mode (SCAM302 3D camera and STX202 two-way transmitters required)-2D diversity mode-HDMI in-Channel auto searching-Dedicated eyeshade with headband for more comfortable wearing-Screen OSD-Built-in DVR with playback-Built-in 40CH 5.8G Diversity receiver with raceband, compatible with most FPV 5.8G transmitters on the market (Fatshark,DJI,Walkra,Boscam etc)-Built-in self-calibrating head tracking (gyro, inertial and compass)-Built in dual 854X480(WVGA) monitors, 1,229,760 color sub-pixels-Built-in external camera for surrounding view (640X480,VGA)-AV in/ AV out/ Earphone socket (with volume control)-Adjustable interpupillary and diopter for your eyes-Adjustable brightness and contrast-Complete plug and play kit                

    Review: Write a Review

    $450.99 $392.36, Save 13% OFF

    SKU:SKY02SS-P

    Weight: 0.90 kg

  • FrSky XM 16 Ch Micro SBUS Receiver

    Designed with space-saving and light weight in mind to fit into the smallest of drones, Frskys XM Micro Ultra-Light 16 Channel receiver may be the smallest of the FrSky range, but its no lightweight when it comes to performance!Boasting no less than 16 channels, failsafe and up to 600m range, the XM is compatible with FrSkys D16 mode found on Taranis X9D, X9D Plus, X9E, Q X7 and Horus transmitters as well as external modules, so the full programming power of FrSkys operating systems can be at your fingertips.Features:Ultra-light receiver16 ChannelsFull rangeFirmware upgradeableRSSI outputD16 mode compatibleSpecs:Channels: 16Ch (S.Bus) (1-15ch for PWM,16ch RSSI for FC)Voltage: 3.5 ~ 10VOperating Current: 20mA @ 5VRange: <600mWith RSSI output on board: Analog 0~3.3VCompatibility: FrSky D16 modeNo telemetryDimension: 15 x 10 x 3.5mmWeight: 1gIncludes1 X FrSky XM Micro Receiver

    Review: Write a Review

    $9.99

    SKU:FSRXM

    Weight: 0.10 kg




Find us on Google+ Watch us on Youtube Like us on Twitter Follow us on Facebook

Home   |   About Us   |   New Products   |   Multi-Rotors   |   FPV Airplanes   |   FPV Equipment   |   Battery / Chargers   |   Tools & Accessories   |   Contact Us   |   Blog   |  Site Map

Product Tags: ABCDEFGHIJKLMNOPQRSTUVWXYZ0-9

Copyright © 2015 FPVMODEL.COM®. All Rights Reserved.