FPV Airplanes Top 10

Servos Top 10

  • Skywalker 12g 450mm Mini Metal Gear Analog Servo

    Skywalker campany cooperates with EMAX then gets the customized Skywalker servo,the same specification as ES08MA but longer cable,up to 450mm.12g servo but the same size as normal 9g servos,specially designed for skywalker series plane.Voltage:4.8-6.0VTorque:1.6/2.0Kg.cmSpeed:0.12/0.10sec/60°Size:32*11.5*24mmWeight:12g



    Weight: 0.10 kg

  • HENGE MD260 260 Degrees Metal Digital Servo for FPV Pan Tilt Control (Upgrade MD180)

    Metal gear servo. Only 12 grams.1.Max rotation :260 degree (end point to 140%)2.Torque:2.0 kg.cm /6V. 1.8kg.cm/4.8V3.speed:0.12 sec/60 degree4.weight :12g 5.working voltage:4.5~6V 6.working current:50-100mah 8.Gear: metal 9 . size: 22.5x11.5x24.6mm



    Weight: 0.20 kg

  • TowerPro SG90 9g Mini Servo with Accessories

    - Dimension : 22mm x 12mm x 29mm - Weight : 9g - Operating Speed : 0.12sec / 60 degrees (4.8V no load) - Stall Torque : 1.5kg/cm at 4.8V - Temperature Range : -30 to +60 Degree C - Dead Band Width : 2 usec - Operation Voltage : 3.0 - 7.2Volts - Motor Type : coreless motor - Gear Type : All Nylon Gear - Connector Wire Length : 150mm

    $4.50 $2.79, Save 38% OFF


    Weight: 0.10 kg

  • Henge MS522 13g/2.3kg High Speed Metal Gear Micro CCPM Swash Servo

    Parameter:Product Dimensions: 22.5 * 11.5 * 24.6mmProduct weight: 12gConnection length: 21CMCharacteristics:-Use metal gears, especially use steel material in output gear, which has better intensity, makes sure servos output deviation very small after long time running.-Use high quality motors, makes sure the servos life longer than normal analog servos.-Supply 2.3kg cm torgue; designed for special occasions which need hig torgue; be suitable to be used in 450 dynamoelectric helicopters to control the inclined dishes and in fixed wing airplanes.



    Weight: 0.10 kg

  • EMAX ES08MD Mini Metal Gear Digital Servo 12g/ 2.4kg 0.10 sec

    EMAX ES08MD Mini Metal Gear Digital Servo 12g/ 2.4kg 0.10 secEMAX ES08MD Digital Servo Specifications:   - Type: ES08MD- Operating voltage: 4.8V~6.0V- Operating speed: 0.10sec/60o at 4.8V; 0.08sec/60o at 6V- Stall torque: 2.0/2.4 kg.cm 27.8/33.3 oz.in (4.8V/6v)- Dead band: 1 uSec- Gear Material: Metal- Connector wire length: 25 cm- Connector type: Futaba/JR compatible - Size: 32 x 11.5 x 24 mm(1.25 x .45 x .94in)- Weight: 12g / 0.42ozPackage included:   - 1 x Emax-ES08MD Servo



    Weight: 0.10 kg

  • Henge 12g 2.0kg 10sec MD933 Metal Gear Digital Servos

    Henge MD933 ServoFeatures:Using metal wheel gear which is of higher precision and small error of servo output.Using high performance motor of the same level with FUTABA, makes service life longer, and experiments prove that it can continuous high speed work for 50 hours.The shell is made from Japan raw materials.Rapid response control, response time <4usec.High coordination, center error: < ± 0.5 degree, 40 degree error: < ± 0.5 degrees, 60 degrees error: < ± 0.5 degree.Unique overload current protection function, prevent the motor and electronic componentsrotor from being burnt down.Suitable for 450 level electric helicopter swashplate control and fixed wing aircraftParameter:Working voltage: 4.5V - 6.0VOperating temperature: -20 ℃ to +60 ℃Speed: 0.10 sec/60 6V  0.12 sec/60 ℃ 4.8V ℃Torque: 2.0kg.cm 6V  1.8kg.cm 4.8VWorking current: 50-150mALocked rotor current: 600mADead band width: ≤ 4usecAngle of deviation: the center error: < ± 0.5 degree, 40 degree error: < ± 0.5 degreeSize: 22.5*11.5*24.6mmWeight: 12gBearing: MetalGear: 4 metal, 1 nylon gearCable length: 21cm

    $13.90 1


    Weight: 0.10 kg

  • Savox SC-1256TG High Torque Titanium Gear Digital Servo-savsc1256tg

    The SC1256TG pushes 277.2 oz of torque and this servo is perfect for those who are running a 4x4 short course truck and dont want to blow their whole wad on their servo. The SC-1256TG sports titanium and metal gears to keep things strong and running smooth. Features:Combines leading edge technology with super high 12 bit (4096) resolution and titanium gears.Super light-weight.Coreless motor provides high speed, incredible efficiency, and low power consumption.Titanium gears ensure long life and durability.The aluminum case design not only looks good but also allows for cooler and smoother operating temps.Our servos are totally green – from materials to production, these servos are environmentally friendly.Ideal for steering applications in 1/8 scale buggies, monster trucks and rock crawlers.Dimensions(mm): 40.3x20.2x37.2Weight(g):52.4Speed(@4.8V sec/60): .18Torque(@4.8V oz-in): 222.2Speed(@6.0V sec/60): .15Torque(@6.0V oz-in): 277.7Gear: Titanium & AluminumBearing: 2BBCase: AluminumRunning current (at no load):  100 mA @ 4.8VRunning current (at no load):  120 mA @ 6.0VStall current (at locked):  4000 mA @ 4.8VStall current (at locked):  5000 mA @ 6.0VIdle current (at stopped):  5 mA @ 4.8VIdle current (at stopped):  5 mA @ 6.0VLimit angle:  200°±10°Connector wire gauge:  #22 AWGConnector wire length:  250 ±5 mmHorn gear spline:  25TControl system:  Pulse width modificationAmplifier type:  Digital ControllerOperating Travel:  100° (when1000→2000 μsec)Neutral position:  1500 μsecDead band width:  3 μsecRotating direction:  Counterclockwise (when1500→2000 μsec)Pulse width range:  800→2200 μsecMaximum travel:  Approx 130°(when900→2100 μsec)



    Weight: 0.30 kg

Find us on Google+ Watch us on Youtube Like us on Twitter Follow us on Facebook

Home   |   About Us   |   New Products   |   Multi-Rotors   |   FPV Airplanes   |   FPV Equipment   |   Battery / Chargers   |   Tools & Accessories   |   Contact Us   |   Blog   |  Site Map


Copyright © 2015 FPVMODEL.COM®. All Rights Reserved.