Flight Controllers Top 10

Sorted:
  • MyFlyDream GPS Module for MFD Autopilot, TeleFlyPro, V5 AATDriver

    UBloxDuoTracking3.3V~5V power supply.output NMEA data @ 38400bps, 10Hz rate.For MFD AUTOPILOIT ,TeleFlyPro OSD , and V5 AATDriverUpdate on August 3rd: Add the Duo TrackingGPS to use with MFD AATDriver.It has been configured to 19200bps/NMEA, and has a 6pin connector to connect to AATDriver.After plug this GPS to AATDriver the AAT system "DuoTracking" function is activated. The tracker knows where it is and will keep tracking even when its moving on a car. And you dont need to SetHome before take off anymore.How to check if the GPS is correctly connected with AATDriver:Hold the HOME button on AATDriver. If the local GPS is recognized, you will see a message in the middle of the OSD screen

    Review: Write a Review

    $36.00 $30.60, Save 15% OFF

    SKU:MFD10HGPS

    Weight: 0.10 kg

  • FEIYU FY 41AP Lite Autopilot AFSS&OSD For Fixed Wing

    FY-41AP Lite is an inertial attitude measurement instrument used for FPV flight on fixed-wing aircrafts. It has an integrated OSD video overlay system that presents critical flight information such as power management, airspeed, altitude, and flight direction via its electronic compass, allowing for a clear visual flight while ensuring key information is within sight.Flight stabilization is achieved via an integrated 3 axis gyro, 3 axis accelerometer and a barometric pressure sensor. This enables the module to accurately measure flight attitude, earth azimuth & relative altitude to achieve:- Extremely stable conventional flight pattern- Stabilized 3D flight- Automatically return to home (RTL)- Fixed altitude flight- Heading lock flight- Auto circling over a fixed GPS location. Function Introduction● Deactivated Mode —— In this mode, the FY-41AP Lite auto stabilization is turned off. The aircraft is completely under pilot control.● Stabilized Mode —— Level flight is automatically maintained, making flight simple, especially for beginners. If a pilot feels the plane is out of control, simply reduce input control and the plane will automatically recover level flight.● 3D Mode —— If no input is given by the pilot (all sticks in the middle position), 3D mode will lock the current aircraft attitude. Therefore the aircraft can be easily maneuvered to complete a variety of 3D flight with added stability & smoothness.● Fixed altitude & Heading lock Mode —— This mode maintains aircraft flight course & holds the altitude on activation. By using GPS data, the system automatically corrects flight course deviation & maintains straight-line flight.● Auto Return To Launch Mode (RTL) —— Upon activation of this Mode, the aircraft will automatically return to the Home point, maintaining its current altitude. Upon reaching the Home point, it will initiate auto circling.> Related download :FY-41AP Lite Manual :  DownloadFeiyu tech kindly remind you: You should to do the firmware upgrade separately for FY-41AP Lite control module and OSD module . UART1 is the interface connects to the data radio, computer serial port to do the firmware upgrade for FY-41AP Lite control module.If you want to upgrade the firmware of FY-41AP Lite OSD module,please click on hereOSD Video Overlay System Function● First Person View (FPV) —— FY-41AP Lite has an integrated OSD video overlay system that presents critical flight information on the video for easy enjoy FPV, at the same time, Auto stable, Fixed altitude & Heading lock, Auto Return To Home function will make FPV operation more easy.OSD is an essential part for FPV. The FY-41AP Lite can adapt both PAL and NTSC video signals. The entire adaptive process is completed approximately within 1 second.Integrated OSD Video Overlay System, FY-41AP Lite overlays flight telemetry information onto video image. Information displayed includes: Altitude, Speed, Direction, Home Direction and many more. FY-41AP Lite OSD display part firmware V1.22 : DownloadFY module firmware upgrade software and manual :Download You should to do the firmware upgrade separately for FY-41AP Lite control module and OSD module. UART2 is the interface connects to the computer serial port to do the firmware upgrade for FY-41AP Lite OSD module.If you want to upgrade the firmware of  flight control part ,please click on hereFY-41AP Lite Compared With FY-41AP Basic PerformanceSupported aircraft:1, Normal / Traditional fixed-wing planes;2, Delta-winged plane with rudder;3, Delta-winged plane without rudder;4, V-tail plane with aileron;5, V-tail plane without aileron;Supported servo output :   50Hz refresh frequencyRecommended Transmitter :   PCM or 2.4GHz with minimum 6 channelsFY-41AP Lite Module Working Voltage :   5.3V@0.2A( Powered by Power Manager)Air speed senor :   0 ~ 200KM/hPower Manager :   35g(50×24×18mm)Working Voltage Range :   Power of battery 7~26V (2S ~ 6S)Measuring current :   0~100APower for FY-41AP Lite module :   5.3V@2APower for Video transmission system :   12V@2AOperating Temperature :   -10°C ~ 50°CAssistant Software System Requirement :   Windows XP sp3 / Windows 7 / Windows 8  HardwareFY-41AP Lite: 20g (61×39×14mm);GPS :24g (32×32×13.5mm);Air speed senor:9g (64×13.5×13.5mm);Power Manager:35g(50×24×18mm); GCS Ground Station Software GCS ground station software, used to set the flight parameters, mission planning, monitoring in flight. Software integration of electronic map function can through the map software the Google earth live map out into the GCS software. The main function is     Parameter Settings — Control parameters setting, course setting, etc.     Real time monitoring — It can monitor flight attitude. And via the GCS software you can change the flight altitude in real time and realize the mouse click flight.     Record and monitoring flight — You can monitor and download flight path via the GCS software in your computer.GCS 5.11 Software:   Download quickly   |  Download

    Review: Write a Review

    $150.00 $114.00, Save 24% OFF

    SKU:FY41APL

    Weight: 0.50 kg

  • MFD MyFlyDream Autopilot OSD Flight Stablizer 2014

    Please connecting the airspeed meter to aux channel.MAIN FEATURES All In One design. AutoAntennaTracking/AHRS based AutoPilot(3-Axis gyro+accelerometer+magnetic compass + barometer)/Advance OSD/Power module/... are all built in this small,light unit.Fully compatible with AAT systemRich extension ports for Sonar/Air Speed Sensor/Other accessories.AHRS is build-in with Anti-vibration design, easy to install on the plane without any damper.Compatible with MAVLink protocol. Support APM Planner GroundStation software. You can synchronize the waypoints by clicking one button. There are also some GS Apps for mobile phones available.Support PPM/PWM input.All functions/parameters can be accessed by the transmitter and OSD menu.The first AutoPilot transmitting downlink data for tracking via both VIDEO and AUDIO signals.Shipped with customized shielded cables for camera/video transmitter, GPS, 100A current sensor and USB programmer for firmware update. easy to setupSPECIFICATION Power supply: 7~20V (recommended 12V)Current consume: <200ma@12V(included GPS, without other electronics) PWM input channels 6 (PWM input setup) or 8(PPM input setup)PWM output channels: 4Maximum rolling angular: 2000 degree/SFlight modes: MANual, STaBlizer, CIRcle, WayPoinT, ReturnToHome Max Waypoints: 10Support plane layouts: Normal, Wing, V-TailUpdate on November 2nd, 2015: Upgrade the USB. MFD Autopilot Manual EN_download

    Review: Write a Review

    $199.00 $193.03, Save 3% OFF

    SKU:MFDFS100A

    Weight: 0.40 kg

  • FY Panda2 panda II Autopilot for Fixed Wing

    Brief Introduction        Panda2 Autopilot mainly include:Panda2 Autopilot module, GPS module, Airspeed module,Power management module,Remote adapter module, communication system, GCS.Through our GCS software you can set flight waypoint,flight altitude,flight speed, Equidistance or Timing taking photo and so on.Also can control the aircraft to Automated circling, Automated Return to Home (RTH), Automated take off and Automated landing according the route setting. You can real-time change the flight task during the flight, convenient and flexible operation, easy installation and debugging. In addition there are many protected mode, can the greatest degree of guarantee reliable and flight safety. Could be used for unmanned aerial vehicles (uavs) automatically control or professional aerial photography.Note: The FY Panda2  Autopilot didnt include the radio, if you need the radio, pls chick: FY-602 Data Radio Station or FY-605 Radio Station.Main characteristic    1. PANDAⅡ provides high-precision flight attitude measurement and control through the utilization of an integrated 32 bits microprocessor, GPS receiver, three-axis MEMS gyros, three-axis accelerometer, three-axis magnetic sensor, accurate barometric pressure sensor, attitude algorithm, Kalman filtering and data fusion algorithms.    2. Combined the attitude module and the control module, get more small volume and lighter weight.    3. Realize auto take off and auto land, maximum reduce the operating pressure.    4. Can accord to the plane internal space to adjust the install direction , easier to complete the connection.    5. 10Hz data rate GPS receiver, 35 seconds fast positioning time and accuracy of 2.5 meters CEP. The GPS can record the positional parameter with battery , the locating time greatly improved.    6. 100HZ inner attitude control, 10HZ outer navigation control.    7. Multi-channel mixed-control output can be adjusted with ease. The control options include:a) Elevator and rudder navigationb) Elevator, aileron and rudder navigationc) Elevator and aileron mixed-control (elevon) navigationd) V-tail rudder may be used, however a third party mixer have to be supplied by the user.    8. Three control modes:a) Manual Mode ;b) AFSS activated (Active Stabilization) ;c) Automatic navigation control.    9. Two automated navigation control modes:a) Air route navigation modeb) Mouse controlled flight mode.    10. Three special flight modes:a) Fixed circling mode;b) Auto Return to Home (RTH) mode;c) Auto take-off mode.    (On Fixed circling mode and Auto Return to Home(RTH)mode,Panda has 50m altitude protection limited,if the switch point altitude below 50m,Panda will automatic climb to 50m.)    11. Any standard RC transmitter and receiver can be used with this system.    12. Automated RTH (Return to Home) protection when there is a break in GCS communication link via the data radios. This time the system is working only in the data radio control mode.    13. PandaⅡ can Integrated automatic and manual aerial photography triggering. Equidistance or Timing taking photo. Combine with the POS data record module can record the current flight attitude info of the taking photo point, for example the Longitude, latitude, altitude, speed, etc.    14. The GCS software helps integrate Automated and Manual flight control modes in an easy to use display interface.    15. The GCS software includes electronic map formatting. By using the electronic map, aircraft route and tasks can be modified in real-time via your GCS computer.    16. Real time display on the GCS includes flight parameters such as main pack voltage, mAh consumed, Amp draw, GPS satellite strength and temperature of the autopilot unit.    17. All flight parameters are downloaded automatically by the GCS for instant playback.    18. IMPORTANT: GCS Function? When using the Data Radio to control the aircraft, the controlling signals from the RC Receiver is directly sent to the Remote Adapter and converted to digital signals. The Data Radio will then upload the commands to your aircraft via the data radio.? The GCS is only used to monitor telemetry and flight status of the aircraft. Transmission of commands is minimal. i.e. the aircraft is mainly controlled by your RC Transmitter. The autopilot still can realize most of the functions (for example, air route setting, RTH, circling) without the GCS.    19. Support the firmware update, can by yourself> Related download :>> FY-Panda2 firmware V1.22 :   Download>> FY module firmware upgrade software and manual:  Download quickly   |   Download>> FY-Panda2 manual :  Read online  |   Download     >> FY-Panda2-POS-Read V1.0 softwar :  Download More FY-Panda2 related downloads: Click in Aircraft Suitability      Conventional, V tail, elevon, no aileron, etc. Various kinds of layout form of small and medium-sized vehicle automatic navigation and driving.      All kinds of the airship automatic navigation and driving. Autopilot ModuleOur new design Panda2 is using the digital sensor chips and integrated structure, controller structure more compact. Panda2 is no need to external POS information record module and SD card for store the POS information. Panda2 has already built-in POS information record module, and in the POS information record module has 4M storage space, will automatically record photo-taken POS information. You can through the Data Radio directly connection to FY-Panda2-POS information read software to read the photo-taken Pos information. Optimize automated take off and landing,also simplify the flight operation. Panda2 can Integrated automatic and manual aerial photography triggering. Equidistance or Timing taking photo.Also Panda2 add Camera Gimbal Stabilization function. GPS ModuleThe GPS working voltage is +5V.Power Management MdulePanda2 can connect with the power management module, power management module has integrated current sensor. It can achieve a variety of power supply mode, Panda2 and servos can be separated power on, also both can be powered by power management module. Air Speed ModulePanda2 can connect with the air speed sensor which automatically controls throttle and can make the aircraft more stable.Remote Adapter Module And Data Radio Panda2 can direct connection RC remote control receiver , also it can use the remote adapter and data radio to enhance remote distance. The role of the remote adapter is turning receiver signal to digital signal for data radio. Common remote control distance generally is at 600 meters, depending on the performance of the remote control and the RC receiver. This cannot meet the needs of long distance, after using data radio, remote control distance is decided by data radio, you can reach more than 10KM, completely solve the problem of long-range FPV flight. Data radio can also be connected to the FY-GCS ground station software to monitor the recording flight path and data.GCS Ground Station, pls refer: FY-602 Data Radio Station or FY-605 Radio Station GCS ground station software, used to set the flight parameters, mission planning, monitoring in flight. Software integration of electronic map function can through the map software the Google earth live map out into the GCS software. The main function is      Parameter Settings — Control parameters setting, course setting, etc.      Real time monitoring — It can monitor flight attitude. And via the GCS software you can change the flight altitude in real time and realize the mouse click flight.      Record and monitoring flight — You can monitor and download flight path via the GCS software in your computer.GCS 5.1 is suitable for Panda2:   Download quickly   |  DownloadMore versions of the GCS software, please   click in

    Review: Write a Review

    $1,290.00 $1,135.20, Save 12% OFF   

    SKU:PANDA2

    Weight: 0.50 kg

  • FY 41AP-A&OSD Autopilot For Fixed Wing

    Brief Introduction       FY-41AP is an inertial attitude measurement instrument used for FPV flight on fixed-wing aircrafts and multi-rotors aircrafts. It has an integrated OSD video overlay system that presents critical flight information such as power management, airspeed, altitude, and flight direction via its electronic compass, allowing for a clear visual flight while ensuring key information is within sight.       Flight stabilization is achieved via an integrated 3 axis gyro, 3 axis accelerometer, 3 axis magnetometer and a barometric pressure sensor. This enables the module to accurately measure flight attitude, earth azimuth & relative altitude to achieve:Extremely stable conventional flight patternStabilized 3D flightAutomatically return to home (RTL)Fixed altitude flightHeading lock flightGPS waypoint flightAuto circling over a fixed GPS location. Function Introduction    ● Deactivated Mode - In this mode, the FY-41AP auto stabilization is turned off. The aircraft is completely under pilot control.    ● Stabilized Mode - Level flight is automatically maintained, making flight simple, especially for beginners. If a pilot feels the plane is out of control, simply reduce input control and the plane will automatically recover level flight.    ● 3D Mode - If no input is given by the pilot (all sticks in the middle position), 3D mode will lock the current aircraft attitude. Therefore the aircraft can be easily maneuvered to complete a variety of 3D flight with added stability & smoothness.    ● Fixed altitude & Heading lock Mode - This mode maintains aircraft flight course & holds the altitude on activation. By using GPS data, the system automatically corrects flight course deviation & maintains straight-line flight.    ● Waypoint Navigation Flight Mode - Enable you to fly fully autonomous, with up to 20 waypoints settings via the FY Ground Control Station (GCS) software.    ● Auto Return To Launch Mode (RTL) - Upon activation of this Mode, the aircraft will automatically return to the Home point, maintaining its current altitude. Upon reaching the Home point, it will initiate auto circling. > Related download for fix-wing :FY-41AP firmware for fix-wing V1.16 :DownloadFY module firmware upgrade software and manual :DownloadThe latest FY-DOS&41AP-SETTING software V1.11 for fix-wing :DownloadFY-41AP manual for fix-wing: Read online More FY-41AP related downloads: Click in OSD Video Overlay System Function    ● First Person View (FPV) - FY-41AP has an integrated OSD video overlay system that presents critical flight information on the video for easy enjoy FPV, at the same time, Auto stable, Fixed altitude & Heading lock, Waypoint Navigation , Auto Return To Home function will make FPV operation more easy.        OSD is an essential part for FPV. The FY-41AP can adapt both PAL and NTSC video signals. The entire adaptive process is completed approximately within 1 second.        Integrated OSD Video Overlay System, FY-41AP overlays flight telemetry information onto video image. Information displayed includes: Altitude, Speed, Direction, Home Direction and many more. You should to do the firmware upgrade separately for FY-41AP-OSD control module and OSD module. UART2 is the interface connects to the PC computer serial port to do the firmware upgrade for FY-41AP OSD module.If you want to upgrade the firmware of  flight control part ,pleaseclick on here. FY-41AP OSD display part firmware V1.13 : DownloadFY module firmware upgrade software and manual :DownloadBasic PerformanceSupported aircraft :         1, Normal / Traditional fixed-wing planes;         2, Delta-winged plane with rudder;         3, Delta-winged plane without rudder;         4, Plane without aileron;         5, V-tail plane with aileron;         6, V-tail plane without aileron;Supported servo output: 50Hz refresh frequencyRecommended Transmitter: PCM or 2.4GHz with minimum 6 channelsFY-41AP Module Working Voltage: 5.3V@0.2A( Powered by Power Manager)Air speed senor:0 ~ 200KM/hPower Manager:        Working Voltage Range: Power of battery 7~26V (2S ~ 6S)        Measuring current:0~100A        Power for FY-41AP module:5.3V@2A        Power for Video transmission system :12V@2AOperating Temperature: -10°C ~ 50°CAssistant Software System Requirement: Windows XP sp3 / Windows 7 / Windows 8 Flight PerformanceNavigation Accuracy : Heading:±5°, Rout deviation:±15m (GPS Mode)Max Gyro Angular Velocity: 2000°/sAltitude hold: ±10m Hardware● Weight&Dimensions:FY-41AP: 34g (58×37×19mm);GPS :24g (32×32×13.5mm);Air speed senor:9g (64×13.5×13.5mm);Power Manager:35g(50×24×18mm); GCS ground station software, used to set the flight parameters, mission planning, monitoring in flight. Software integration of electronic map function can through the map software () the Google earth live map out into the GCS software. The main function is    - Parameter Settings — Control parameters setting, course setting, etc    - Real time monitoring — It can monitor flight attitude. And via the GCS software you can change the flight altitude in real time and realize the mouse click flight.    - Record and monitoring flight —You can monitor and download flight path via the GCS software in your computer.GCS 5.1 Software:   Download quickly   |  DownloadNote: Before using FY GCS above 4.11 version, please make sure that the firmware of FY-41AP is the latest version!More versions of the GCS software, please   click in 

    Review: Write a Review

    $249.00 $206.67, Save 17% OFF

    SKU:FY41AP-A

    Weight: 0.50 kg




Find us on Google+ Watch us on Youtube Like us on Twitter Follow us on Facebook

Home   |   New Products   |   About Us   |   Multi-Rotors   |   Contact Us   |   Blog   |   FPV Airplanes   |   FPV Equipment   |   Battery / Chargers   |   Tools & Accessories   |  Site Map

Product Tags: ABCDEFGHIJKLMNOPQRSTUVWXYZ0-9

Copyright © 2015 FPVMODEL.COM®. All Rights Reserved.