New Products Top 10

  • X-Racer X-1 F3 Flight Controller V2 with Frsky Rx and OSD Integrated

    The X-Racer X-1 Whoop flight controller is making a return with an all new update. We are always listening to what our customers say and we have made some improvements accordingly. In reality, this is not just a simple whoop flight controller that was designed by us but its more of an FC that has been re-designed by users like you.This micro whoop brushed F3 flight controller was designed for X-Racer X-1, but it also can be used on those micro quadcopters like Tiny Whoop and Blade Inductrix.Features:1. The RX connection protocol has been upgraded from PPM to SBUS. With the SBUS protocol, you are able to get a faster response when the micro racer turn around.2. The integrated OSD (on screen display) is able to show some important flight data on your FPV feed, including battery voltage, current draw etc. You can even use it as a menu to change your quad’s PID, rates, filters and others.3. Larger MOS ensures a smoother flying with your micro racer. 4. The DC regulator module has been upgraded for a better loading capacity.5. Compatible with FrSky & SBUS, USB port ready.6. Pre-flashed with the latest Betaflight firmware.7. The binding buttons for the built-in Frsky RX have been updated, more convenient to use.How to Bind Built-in FrSky RX.1. Press "Band" to power on the quad, the middle red LED will turn on.2. Turn on your FrSky transmitter, set the mode to D8, 1-16CH, and then start to bind.3. After successfuly binding, on the right corner the red LED will start to slowly flash.4. Re-power on the flight controller, the binding is completed.How to Bind other RX.1. Connect the FC to Betaflight.2. Enter following instruction in CLI: set sbus_invention = on. And then save.3. The UART needs to choose 3.(Please take a note that the FC automatically works with the built-in FrSky RX, if you want to use with other RX, please set the CLI before using.)

    $29.99 $20.99, Save 30% OFF


    Weight: 0.10 kg

  • Dragonfly 25mw 48CH Micro VTX For X-Racer X-1 and KL-EX90

    FPVModel did not stop at the flight controller design. We have also designed a Drgonfly 25mw 48ch Vtx to mount flushly on top of the FC and give and even more aero dynamic low profile design for the video transmission. By using this low profile design were able to streamline the body of the X-Racer X-1 and allow for smooth airflow over the low slung canopy, allowing for smooth airflow over the top of the frame.

    $15.99 $13.59, Save 15% OFF


    Weight: 0.10 kg

  • 4 Ports 1S Lipo Charger With XT60 Plug for Tinywhoop X-Racer X-1

    FPVModel 4 Port 1s Lipo ChargerThe little lipo charger is specially designed for the little lipo batteries with 2.0 plug, like the ones used on X-Racer X-1, Tiny whoop and other micro racer. 3-6s input, switchable between high voltage and low voltage charging modes.An the 1s lipos usually only last for 3 to 5 minutes during the flying. It would be better if you have several extra batteries ready. But for an ordinary USB charger, it is just able to charge one lipo each time. With the this new 1s lipo charger, we are now able to charge four 1s lipos at once.Features:1. Input Voltage: 3-6S2. Two charging modes: Normal charging of 4.2v or High voltage charging 4.35V3. Charging time: 30 Min.4. Excellent heat dissipation5. Stable charging status to guarantee the full charge of lipos.

    $9.98 $4.99, Save 50% OFF


    Weight: 0.10 kg

  • X-Racer X-1 V2 Replacement Kit of Frame and Canopy

    * Before Purchasing: Regular price $4.98 USD. For a limited time, we only sell this kit at a killing price of $2.99 USD. Each customer is limited to 10 sets and can not use any discount coupon. This is the replacement kit of frame & canopy for X-Racer X-1 DIY purpose. A transparent packaging is included.

    $2.99 1


    Weight: 0.10 kg

  • Replacement Kit of Frame, Cover, Props and Motors for X-Racer X-1 V2

    This is the accessories package for X-Racer X-1 V2 and DIY purpose.  Including the cover, frame, props and motors.



    Weight: 0.25 kg

  • X-Racer X-1 V2 BNF with Two Batteries

    X-Racer X-1 Review by the RCAddictNote: Due to the air regulation, the batteries can only be shipped to following countries by E-packet:Canada, Australia, France, Germany, United Kingdom and United States. By Registered Airmail Shipping: Japan, Brazil and Russia.  If you are from other countries or areas, please help to choose DHL for shipping.Note: The BNF needs 1 to 3 days to test and assembly.The X-Racer X-1 micro racer is making a return with an all new with the F3 brushed flight controller. We are always listening to what our customers say and we have made some improvements accordingly. Now the new X-Racer X-1 F3 Fight Controller V2 comes with Frsky Rx and OSD Integrated.Agile, safe and fun. The X-Racer X-1 is an ultra-micro FPV drone designed for indoor flying in even the smallest of places. It is an amazing gift to both the first time pilot and advanced pilots.  We understand that some of you just want to fly and enjoy the race. So you can also just choose the BNF version and leave all the assembly & testing job to us. The BNF version is a fully assembled kit and it is fully tested before shipping. All firmwares are loaded and customers just need to bind with their Frsky transmitter and enjoy the flight.Main Features:1. Pre-flashed with the latest Betaflight firmware. (Its recommended not to re-flash with other firmware which might cause problems)2. Micro 5.8g 48ch Vtx. 3. FC is compatible with FrSky & SBUS, USB port ready.4. Micro FPV HD Camera.5. The case is available in various colors. (Blue, Gray, Yellow, Rose, optional )6. The BNF version is completely assembled that just need to bind with the Taranis then fly.7. No soldering or 3D printing required.Package Included in BNF Combo :X-Racer X-1 V2 Frame x 1X-Racer X-1 V2 Cover x 1 (Blue, Grey, Yellow, Rose, optional)Set of Flight Controller, Camera, TX and Antenna x 1 (Pre-soldered, Camera in PAL format)X-Racer HV 1S 250mah 3.8v 60C Hight Voltage Battery x 2 Dragonfly 7x16mm 14000KV Coreless Motor for X-Racer x 4 (2cw + 2ccw)X-Racer 31mm 4 Blade Clear Propellers x 8 (4cw + 4ccw)X-Racer X-1 USB charger x 1You might also like: HobbyTiger BC-1S06 Lipo 6 Port Battery Charger or 4 Ports 1S Lipo Charger With XT60 Plug

    $59.99 3


    Weight: 0.40 kg

  • Dragonfly 7x16mm 14000KV Coreless Motor for X-Racer X-1

    These are powerful 7mm motors that works great in X-Racer X-1 like micro racers. These motors come with plug and 8cm wire, they are better suited to FPV and will be the perfect upgrade for your Tiny conversion. If you are looking for punch and durability, you found it. Description:Motor Diameter: 7mmMotor Length: 16.5mmShaft Diameter: 0.8mmCable Length: 80mmWeight: about 3.2gOption: CW Motor(With Red Black wire), CCW Motor(With Black White wire)Quantity: 1pc / 4pcs(2CW+2CCW) optional



    Weight: 0.10 kg

Find us on Google+ Watch us on Youtube Like us on Twitter Follow us on Facebook

Home   |   About Us   |   New Products   |   Multi-Rotors   |   FPV Airplanes   |   FPV Equipment   |   Battery / Chargers   |   Tools & Accessories   |   Contact Us   |   Blog   |  Site Map


Copyright © 2015 FPVMODEL.COM®. All Rights Reserved.