• FrSky M-9 Hall Sensor Gimbal For Taranis X9D & X9D Plus

    Upgrade your Taranis X9D with this plug-n-play high resolution M9 Gimbal from FrSky. The highly sensitive Hall sensors will not wear out quickly. It has an extremely smooth feel with the quad ball-bearings and the metal outer construction. Thicker 4mm stick ends give you a solid link to your controls. Fully adjustable tension and easily disable the self centering axis with one screw. This is a must have accessory for achieving those precision flight maneuvers. Spcification:Brand Name: FrskyModel: M9-GimbalItem Name: M9-Gimbal M9 Sensitivity Sensor GimbalSupply Voltage (VCC): DC 3.0 ~ ±0.5V Sensitivity: 2.50 mV/G Linear Output Voltage Range: 0.1 ~ (VCC +0.1) V Quiescent Output (TA = 25°C, B = 0 G): 0.5 × VCC Noise (no load): ≤40mVppFeatures: -Hall sensor-4 ball-bearings-Adjustable tension-Can be enable or disable self centering on both axis and ratcheting on the Y axis-Special material quality that wears well

    $24.99 $17.99, Save 28% OFF


    Weight: 0.15 kg

  • Hawkeye-III 3 Axis Gimbal with 18x Zoom Optical Camera

    Promotion: Limited time offer, use discount code 18XZOOM at checkout to get a discount of 20% off. The Hawkeye-III from Zingto Tech is a professional 3 Axis Gimbal with 18x Zoom Optical Camera that specially designed for mini aircrafts. This 18x zoom gimbal can be applied in the fields like military reconnaissance, police investigation, police surveillance and evidence collection, power line inspection, disaster prevention and mitigation, emergency monitoring, and rescue etc.Features:All in one design, the 18x zoom optical camera included.Compact structure yet easy to install.Plug and play with new intelligent solutions.The magnetic encoder can accurately sense the change of motor motions. The seamless shaft rotating technology brings a smooth operation.Secured built-in motor ensures an orderly rotation to avoid the possible stranding.Specifications:Dimensions: 156 x 156 x 1509(±5) mmInput voltage: 4S~6SOperating temperature: -10℃~45℃Augmentation axis: 3 axisAngle motion range: -30°~30° (Rolling angle); -120°~30° (Pitching angle); -175°~175°(Horizontal Direction)Controlling precision: 0.03°Supported Receiver : Conventional ReceiversWeight: <600(±50)gMaterial: Aviation aluminum alloy, nylonWhite light camera Performance:·1/4 inch 3 million pixels CMOS SENSOR·Video Resolution: 1920 x 1080P/30 frame·18X zoom optical camera·Support wide dynamic, dynamic range up to 105dB·AV analog output, HDMI HD 720P 60 frame output, 1080P video streaming locally stored.·Real-time fast focus function, focus time<1S·Automatic white balance, automatic gain, automatic color correction



    Weight: 2.85 kg

  • GoPro/Runcam/Mobius Carbon Fiber Camera Gimbal V1.1 for ZMR-X210 RC Quadcopter

    Description:Item: GoPro/Runcam/Mobius Camera Gimbal (optional)Color: BlackMaterial: Carbon FiberUsage: Spare parts for ZMR-X210 only Package Included:1 x Camera GimbalNote: Gimbal only. The frame kit doesnt included.Update on April 22nd, 2016: The gimbal have been upgrade into V1.1 version.GOPRO RUNCAM

    $7.99 $5.75, Save 28% OFF 1


    Weight: 0.10 kg

  • Tarot 5D3 3-Axis Self-stabilizing Gimbal TL5D001(free shipping)

    The Tarot 5D3 3-Axis self-stabilizing gimbal is specifically designed to carry the Canon 5D Mark III and 5D Mark II camera and perfectly match with Tarot X6 Hexacopter. Its CNC processing with thin-walled structure gives you a stable footage and precise control even in the most difficult flight conditions.The Tarot 5D3 is based on gimbal system with optimal algorithm. Built-in independent IMU module gives you precise and effortless control. Three working modes are supported, orientation locked, Non orientation locked and FPV. Built-in slip ring simplifies the cabling. The command stick controls gimbal rotation velocity. Tarot 5D3 3-Axis self-stabilizing gimbal can be converted into handheld gimbal with quick release handle (the handle needs to be purchased additionally). Tarot 5D3 3-Axis self-stabilizing gimbal is your best choice. Features:1.Working modes-Orientation-locked control-Non orientation-locked control-FPV mode2.Bulit-in independent IMU module3.Tarot gimbal special drive module4.AV output port5.Camera shutter control supported6.Wide range voltage input supported7.S-Bus/PPM/DSM receiver supportedPeripheralSupported Camera: CANON EOS 5D MARK III & 5D Mark II onlySupported Lens Currently: CANON EF 17-40mm f/4L USMGCU Input Power: 3S~6S LiPoControl Requirement: At least four spare receiver channelsAssistant Software System Requirement: Windows XP SP3; Windows 7; Windows 8 (32 or 64 bit)Mechanical & Electrical CharacteristicsWorking Current: 120mA (@25V) 180mA  3S-6S Li (11V-26V)Operating Temperature: -20°C ~ 50°CWeight: 1.51KGDimensions: 215mm*240mm*246mmWorking PerformanceControlled Angle Accuracy: ±0.02°Maximum Controlled Rotation Speed:Pan axis: ±200°/sTilt axis: ±200°/sRoll aixs: ±200°/sRotation:Pan axis control: ±360° continuous rotationTilt axis control: -135°-+45°Roll axis control: ±48°

    $919.90 $809.51, Save 12% OFF   


    Weight: 2.50 kg

  • Matek UBEC 5A 12V/7.2V Switchable for VTX Gimbal etc

    Matek UBEC 5A-12V is a switch-mode DC-DC regulator, works with 7.2V~25.2V, and outputs a consistent safe power supply(7.2V or 12V) for your electric equipments. It allows you to use FPV equipment that only works with 12 Volts of power supply. it will power VTX, gimbals, cameras, LED lights,etc. It features a high efficiency switch mode design providing better heat dissipation when compared to linear voltage regulators.SPECIFICATIONS:Output Voltage: 7.2V@5A or 12V@5A (Selectable by the switch)Output current: Continuous 5 Amps, burst 8 Amps.Input: 7.2V~25.2V (2-6S Lipo battery)Size: 60*29*12mm (L*W*H), Weight: 30gInput cable 15cm (Silicone), Output cable 32cm(Silicone)FEATURES:Uses advanced switch mode DC-DC regulator IC.Much higher efficiency (up to 92%) than the linear mode BEC.With ultra-wide input voltage from 7.2V-25.2V.Output short-circuit protection function.The working status is shown by an LED, it lights when the UBEC works normally.Dual output sockets with magnet ringWARNING:The input voltage should be 12.6V minimum, to ensure stable output 12V.Dual sockets output the same voltage.Pay attention to the input polarity. Reversed polarity will damage the UBECProperly insulate and regularly inspect all connectors to eliminate the possibility of short circuit

    $11.50 $5.06, Save 56% OFF


    Weight: 0.10 kg

  • Universal Spirit Level for Gimbal Debugging

    Size:58*44*13mmHigh accuracy and durable.Specially designed for gimbal to debug and test,or make anyother things keep in level.Two colors:black and red,delivery at random.

    $2.90 $2.76, Save 5% OFF


    Weight: 0.10 kg

  • X-CAM X140BS 2-Axis Brushless Gimbal System for NEX5 Series

    X-CAM X140BS 2 Axis Stabilization Gimbal System Weight: 700g without camera & lensInput Voltage: 12vDistance of hook rod: 155mmSupports camera: SONY Nex5n, Nex5R, Nex5TSupport lens: - SONY E PZ 16-50mm F3.5-5.6 OSS (SELP1650) - SONY E 16mm F2.8 (SEL16F28) - SONY E 20mm F2.8 (SEL20F28)ROLL Travel: +- 45 degreeTILT Travel: +- 90 degree with controllable2 Control ways for TILT , move speed adjustableReady to run, does not need to adjust any parameters!Package included:X410BS gimbal frame kit(assembled) x 12-Axis gimbal controller(assembled) x 13 in 1 connection cable x 1usb wire x 1Hdmi to av signal conversion card x 1screw for lock camera x 1mounting plate x 6(2 and 4)gimbal hook x 4damping ball x 10

    $499.90 $459.91, Save 8% OFF   


    Weight: 1.40 kg

  • YUN-1 gimbal motor mounting cover

    YUN-1 gimbal motor mounting cover,sepcially desighed for yun-1 gimbal brushless motor.High quality and precision,good for bruhless gimbal DIY.Inside diameter:30mmdistance between top screw holes:14mm(dot to dot)color dilivery at random,one order with the same color.

    $3.50 $0.77, Save 78% OFF


    Weight: 0.10 kg

  • Gimbal Part Damping Ball mounting Plates for Gopro Brushless Gimbal DIY(2pcs)

    Brushless gimbal damping ball plates,carbon fiber material,specially designed for gimbal mounting multirotor DIY.Thickness:1.5mmWidth:85mmLength:85mm

    $5.90 $2.24, Save 62% OFF


    Weight: 0.10 kg

  • Gimbal Parts Bracket for Base Frame for Gopro Brushless Gimbal

    Brushless gimbal bracket for base frame,high precision,specially designed for gimbal mounting multirotor DIY.Material:Carbon FiberThickness:2mm

    $2.90 $1.31, Save 55% OFF


    Weight: 0.10 kg

  • Gimbal parts bracket for motor fixed plate for gopro brushless gimbal(2pcs)

    Brushless gimbal bracket for motor fixed plate,specially designed for gimbal mounting multirotor DIY.Material:Carbon FiberThickness:2mm

    $2.90 $2.38, Save 18% OFF


    Weight: 0.10 kg

  • Gimbal parts the camera mounting base fram for gopro brushless gimbal DIY(2pcs)

    The camera mounting base,high precision,specially designed for gimbal DIY.Material:Carbon FiberThickness:2mm

    $2.90 $1.31, Save 55% OFF


    Weight: 0.10 kg

Find us on Google+ Watch us on Youtube Like us on Twitter Follow us on Facebook

Home   |   About Us   |   New Products   |   Multi-Rotors   |   FPV Airplanes   |   FPV Equipment   |   Battery / Chargers   |   Tools & Accessories   |   Contact Us   |   Blog   |  Site Map


Copyright © 2015 FPVMODEL.COM®. All Rights Reserved.