Sorted:
  • RunCam RC25G FPV Lens 2.5mm FOV140 Wide Angle for Swift Series Eagle 4:3 Series Split

    RunCam RC25G FPV Lens 2.5mm FOV140 Wide Angle for Swift Series Eagle 4:3 Series SplitPackage :1 X Lens1 X Lock Ring

    $12.99

    SKU:RC25G

    Weight: 0.10 kg

  • ZMR Eclipse 210mm ARF for FPV Beginners

    Brief Setup Guide of ZMR EclipseZMR Eclipse is a new 210mm carbon fiber mini quadcopter that designed based on the hot selling ZMR-X210. We are always listenting to what our customers say and made some slight changes to make it a better racing frame. For your easy setup, also considering on different users might have different requirements on the setups, we have prepared three different ARF packages of ZMR Eclipse for different levels of users, including:ZMR Eclipse ARF for FPV BeginnersZMR Eclipse ARF for Intermediate UsersZMR EClipse ARF for Advanced UsersThese are the ARF packages of ZMR Eclipse for FPV beginners. We built these aiming to provide you a durable setup with an extremely low cost. It can satisfy your daily practice like freestyle flying. If you are new to FPV, these are definitely perfect choices for you. These ARF packges for FPV beginners come with the reputable Omnibus F4 flight controllers, RJX 2205 2300kv brushless motors and Cyclone BLHeli_S 20A ESCs. We have tested all the parts to make sure they are matching well to have a good performance. The included Omnibus F4 flight controller is not just for beginners, but it is also greatly used in some advanced settings for professional pilots. The omnibus series of flight controllers are known to be the best all in one integrated flight controller, using the best selection of sensors and parts at a great price and small form factor. It uses the MPU6000/ICM-20608 IMU over SPI for the super fast gyro updates (up to 32Khz) to keep up with the fast F4 MCU, allowing you to run your betaflight/iNav control loop insanely fast.  This gives you the extra edge when racing your FPV quadcopter.The Dragonfly 5.8g stackable VTX comes with 48 channels, 9-26v input and switchable between 25/200/600mw. The stackable design makes you easy to place this VTX above your flight controller. With 48 channels, no need to worry about the interference while powered on any more. We choose Cyclone BLHeli-s to use on the builds. BLHeli-S is still the most stable firmware. We have tested the ESCs, it is powerful enough to run with the included RJX 2205 2300KV motors.The ARF packages come with both 2 blades propellers and 3 blades propellers. The 2 blades props save more power than the 3 blades so that you can fly for a longer time, very suitable for FPV beginners. When you are good at flying, you can change to use the 3 blades propellers.The builds also comes with 700TVL 5-12V Micro FPV Camera to make you can enjoy the FPV racing. In general, these setups are specially made for FPV beginners with a good performance and low cost. They can be flied with full throttle and used for freestyle flying, very suitable for practice.ARF 1 Including:ZMR Eclipse 210mm Carbon Fiber Mini FPV Quadcopter Frame Kit  * 1 setRJX 2205 2300KV Brushless Motors * 4 pcsCYCLONE BLHELI-S 20A ESC * 4 pcsMATEK PDB XT60 with BEC * 1 pcOmnibus F4 V5 Flight Controller * 1 pcDragonFly 5030 Bulletproof Props White * 2 pairs5030 Inch Electric Propeller White * 2 pairsAccessories Bag * 1 setARF 2 Including:ZMR Eclipse 210mm Carbon Fiber Mini FPV Quadcopter Frame Kit * 1 700TVL 5-12V Micro FPV Camera * 1RJX 2205 2300KV Brushless Motors * 4 pcsCYCLONE BLHELI-S 20A ESC * 4 pcsMATEK PDB XT60 with BEC * 1pcOmnibus F4 V5 Flight Controller * 1 pcDragonfly 5.8G 48CH Stackable Video Transmitter * 1 pcDragonfly Transmitting Extension Cables * 1 pcDragonfly Booster 5.8G FPV Antenna 5cm SMA * 1 pcDragonFly 5030 Bulletproof Props White * 2 pairs5030 Inch Electric Propeller White * 2 pairsAccessories Bag * 1 setARF1 Including: ARF2 Including: 

    $110.99-$149.99

    SKU:ZMARF

    Weight: 0.50 kg

  • Dragonfly Hurricane 2207 KV2500 Brushless Motor for FPV Racer

    Specially deisigned for FPV racing with extreme performanceFast response and ultimate efficiencyNew technology to ensure smooth runningPrecise balanced and fully testedPowerful, reliable, and quick. This is the latest Dragonfly Hurricane 2207 2500KV brushless motor that specially designed for FPV racing and extreme performance. These Dragonfly Hurricane 2207 2500kv motors feature an open air base to allow for more efficient cooling of the motors. Weighing in at just 30.5 grams helps eliminate some weight compared to other motors and fits with most racers desire to shave precious grams off builds wherever they can.Features:Featuring 20awg silicone wire, N52SH magnets and Japanese NSK bearings these motors are sure to fit the needs of most FPV racers.We use high quality aluminum and rare-earth magnetic materials, and redesigned the magnetic circuit of Dragonfly Hurricane to make sure the motors come with a better loading capacity.We have greatly improved their thrust and efficiency comparing to other motors on the market. At the same time, we have enhanced the response speed to guarantee the smooth flying of your racing quadThe use of special aluminum material for body structure, not only comes with a greater strength than those motors made of the 6 series aluminum that most other motors use, but also greatly reduce the weight. The motor shaft has abandoned the traditional way of installation, the spindle completely goes through the threaded shaft to improve the friction between steel shaft and threaded sleeve of head cover. It also improves the concentricity of motor rotor and effectively increases the strength of propeller shaft, so that to make sure the motor can survive from the hard crashes.The Draongfly Hurricane has added an insulation film between bottom cover and spindle to isolate the connection between screws and copper wires. In this way, the motor is able to prevent from short circuit and leakage that caused by misoperation.Specifications:KV: 2500KVNo.of Cells(Lipo): 3-5SConfiguration: 12N14PStator Diameter: 22mmStator Length: 7mmShaft Diameter: 5mmMotor Dimension (Dia.*Len): Φ27.9×32.7mmWeight(g): 30.3g(Excluding Cable)Recommend Propeller: 5″Recommend ESC: 30-50AWire AWG: 20AWG|Magnet: N52SH Stator: Japan KAWASAKIBearings: Japanese NSK, 693zz, 3x8x4These Dragonfly Hurricane 2207 2500kv motors feature an open air base to allow for more efficient cooling of the motors. Weighing in at just 30.5 grams helps eliminate some weight compared to other motors and fits with most racers desire to shave precious grams off builds wherever they can.We use high quality aluminum and rare-earth magnetic materials, and redesigned the magnetic circuit of Dragonfly Hurricane to make sure the motors come with a better loading capacity.Featuring 20awg silicone wire, N52SH magnets and Japanese NSK bearings these motors are sure to fit the needs of most FPV racers.The Dragonfly Hurricane has added an insulation film between bottom cover and spindle to isolate the connection between screws and copper wires. In this way, the motor is able to prevent from short circuit and leakage that caused by misoperation.

    $13.99-$54.99

    SKU:DG0725

    Weight: 0.10 kg

  • ZMR Eclipse 210mm Carbon Fiber Mini FPV Quadcopter Frame Kit

    On Sale! ZMR Eclipse 210mm Frame For only $19.99 Now!! Hurry now! The promo is only Limited to 20 quantity of frames.ZMR-X210 is one of the most popular and reputable racing frames of FPV Model. We are always listening to what our customers say, and now here comes a new version - ZMR Eclipse. We have made some slight changes to the ZMR-X210. The new body frame is a bit shorter and remove some unnecessary parts but keep the wheelbase the same as 210mm. Still use the same 3K carbon fiber material that we use on ZMR-X210 and ZMR210R. The weight is about 122 grams only including the hardwares.Ajdustable camera angle design, two kinds of installation methods, suitable for the most common FPV cameras on the market.Another big improvement is that the nuts have already been pressed into the carbon plates, so that it is more convenient to build and also will save some weight.Use countersunk screws on the top plate, it is more stable for the battery to put on it. And there remains two battery strap locations to secure the battery. The distance is more reasonable than the x210.3.5mm bottom plate, the ZMR Eclipse is able to survive from the hardest crashes. The installation for the 4 nylon standoffs is more reasonable comparing to the ZMR-X210.Package included: 1x ZMR ECLIPSE Carbon Fiber Frame4x 4mm Carbon Fiber Arms 1X camera mount1x Board Camera Mount 1x Set of Steel screws, aluminum mounting hardware, and standoffs 2x FPVModel velco strap1x 2mm top plate 2x 3.5mm lower platesWeight: 122 grams (Frame and hardware totally ) We have made some slight changes to the ZMR-X210. The new body frame is a bit shorter and remove some unnecessary parts but keep the wheelbase the same as 210mm. Still use the same 3K carbon fiber material that we use on ZMR-X210 and ZMR210R. The weight is about 122 grams only including the hardwares.Ajdustable camera angle design, two kinds of installation methods, suitable for the most common FPV cameras on the market.Use countersunk screws on the top plate, it is more stable for the battery to put on it. And there remains two battery strap locations to secure the battery. The distance is more reasonable than the x210.Another big improvement is that the nuts have already been pressed into the carbon plates, so that it is more convenient to build and also will save some weight.3.5mm bottom plate, the ZMR Eclipse is able to survive from the hardest crashes. The installation for the 4 nylon standoffs is more reasonable comparing to the ZMR-X210.

    $39.99-$25.99

    SKU:ZMREF

    Weight: 0.50 kg

  • Feather SX-220 FPV Racing Frame

    Feather SX-220 FPV Racing QuadFeather SX-220 is a light and durable frame made of Japanese 3K carbon fiber. It features an easily removable camera housing mount that allows the user to access the interior of the frame to preform basic maintenance on electronic components. The side panel camera mounts for your FPV camera can be adjusted from 10-60 degrees to allow for a camera angle that can suit both beginner and experienced pilots. The camera protection housing also works double duty and can be used as a 30 degree mount for you HD action cameras. The interior arm nuts are pressed into the carbon fiber by using pressed nuts we’re able to achieve a simplistic design that looks nice and has a use. The screws for the arm placement can easily be removed and allow for very easy arm removal in the event that one might need to be changed. Feather SX-220 weighs in at 86.5 grams. This includes all bolts, nuts, standoffs and the sma glass fiber antenna mount. Such a light weight will help you shave off plenty of grams in your racing build. Feather SX-220 is also our first quad to be backed with a one year warranty against defects and broken parts. Please have a look at our 1 year replacement warranty that protects you from broken carbon fiber that may occur to your quad within it’s first year of use. Features:Made of Ultra High Quality Japanese 3K Carbon Fiber.Camera Angle can be Adjusted Between 10~60 Degree.FPV/Action Camera Mounts.30 Degree Mount for HD Action Cameras.Glass-fiber SMA mount.Turtle mode Compatible.Replaceable Arms for Easy Installing and Reparing.Only 86.5g includes all bolts, nuts, standoffs and the SMA glass fiber antenna mount.Warranty ClaimsIn the event that breakage does occur, FPV Model is offering a a full coverage warranty on both Carbon Fiber and aluminum stand-offs. In order to process your claim, please send an email to sales@fpvmodel.com. In the email please include the following information: 1.) Your order number. 2.) Your Full Name3.) Pictures of the broken parts with arrows highlighting the problem. Please send pictures of the broken parts. The pictures should show the parts installed on the frame and include a paper note with your order number clearly visible in the photos. Please do not send pictures of parts you may have found on the internet. 

    $39.99

    SKU:SX220K

    Weight: 0.50 kg

  • Skyzone SKY03 3D FPV Goggles

    Skyzone SKY03 FPV GogglesSkyzone is a professional manufacturer of FPV goggles, now here comes the third generation 3D FPV goggles named SKY03. The SKY03 is an upgraded version of the famous SKY02S 3D FPV goggles. They boast a great feature set, comfortable to wear and fit a wide range of eyesight conditions as well. As a business partner of Skyzone, FPV Model is the first on the market to receive the SKY03 FPV goggles.Heres a list of features and specs:With Head Tracking functionDiversity Receiver Module with Dual AntennasISM 5.8GHz 48-channerl diversity receiverSupport HDMI, DVR, AV IN/OUTBuilt with Front CameraUp to 43 Degree FOVBinocular Display,SVGA 800X600 resolution,binocular display.Multiple LED Light effect mode support.Intimate Design of Human MechanicsThe two 5.8GHz wireless receiver modules, the two independently workable display modules and the new DVR?system used to support the 2D & 3D display modes are built in the SKY03 FPV goggles. The wireless receiver system can work in the diversity receiver mode to improve the receiving effect. In this mode, the channel and band settings for wireless receiver can be compatible with most of the conventional ISM 5.8GHz transmitters, in order to support the 6 bands and the 48 channels (for detailed bands and channels, see the specification).The matching 3D camera SCAM303 and the conventional 5.8G transmitter can be put into use in the 3D mode. The two lenses of the 3D camera can be set for shot by means of the parallel method. When the camera is set for a certain close shot, the third dimension will be enhanced effectively. When the camera is set for a long-distance shot, the third dimension will be weakened, but the more vivid visual experiences will be presented as a whole.The new DVR system can not only further enhance the quality of analog video recording, but also can make use of the high-quality H.246 video compression technology to better restore the video screen, save the more storage space, support the 128GB high-capacity memory card(UHS-I U1), and support the automatic video recording function. For details, see the description of the "Video" section.* The actual included spart parts might be a bit different.

    $459.00-$469.00

    SKU:SKY03

    Weight: 0.90 kg

  • RunCam Nano FPV Camera PAL

    Description:Model: RunCam NanoImage Sensor: 1/3" CMOS SensorHorizontal Resolution: 650TVLLens 2.1mm : (M8) FOV160°Signal System: NTSC/PALS/N Ratio: 50dB (AGC OFF)Electronic Shutter Speed : AutoAuto Gain Control: AutoMin. Illumination: 0.1Lux@1.2FWDR: AutoDNR: AutoDay/Night: AutoPower: DC 3.3-5.5VWorking Current: 140mA@3.3V / 140mA@5.5VDimensions: L14mm*W14mm*H17mmNet Weight: 2.5g

    $19.99

    SKU:RCNC-P

    Weight: 0.10 kg

  • ZOHD Dart Sweepforward Wing 635mm Wingspan FPV EPP Racing Wing RC Airplane KIT

    This Dart Sweepforward wing is the first Subter-250g fixed wing that made by EPP mateiral. Detachable main wing and twin-tail wing makes the Dart Wing very easy to install and carry for out door flying, what’s more, the wings will disconnected during a crash, thus to protect the main wing and tail wing. You can put a lot of FPV gear and big battery inside the spacious hatch with “NACA” air-inlet. The aileron were enhanced by carbon strips to avoid any flex during flying and enable a precise control. Description:Brand Name: ZOHDItem Name: Dart Sweepforward WingWingspan: 635mm(25")Length: 406mm(16")Flying weight: 356gFlying time: 15 MinutesMaterial: lightweight EPP Features:* Innovative Sweepforward wing design with large wing size and twin tail wing, avoid stalling during flying.* Classical and practical “S” high efficiency airfoil, create powerful elevating force.* Lightweight but durable EPP molded wing and fuselage, enhanced by built in carbon fiber spars, durable and super crash resistance.* Detachable wing and tail wing structure, compact size, portable and easy to carry for out door FPV fly. “No-glue” required assembly, open box and fly in few seconds.* Built-in Gyro make the Dart wing fly super stable, and easy to control.(Only for PNP version)* Spacious equipment bay for more FPV gear.* With plastic cover to protect the fuselage bottom from landing scratch* CG marked in the bottom of the Dart  wing. Make sure to balance the CG before flying.* With "NACA" Air inlet and outlet for FPV gear coolingRecommended Parts (Not included):Motor: 2006-2400kvESC: 30A w/BEC 1AServo:2*  4.3g Digital ServoPropeller: 6x3 Battery: 3S 1300~1800mAh Note:This item does not include any electronic devices.Package included:1X KIT Dart Sweepforward wing 

    $49.99 $46.49, Save 7% OFF

    SKU:ZDS6-K

    Weight: 1.50 kg

  • Sonicmodell AR Wing 900mm Wingspan FPV Flying Wing KIT

    Sonicmodell AR Wing 900mm FPV Flywing AirplaneEMS latest notice:Due to the high season. Only the following countries can choose EMS shipping for plane orders: Hong Kong, Taiwan, Singapore, Philippines, Japan, Canada, Australia, France, South Korea, USA, Italy, Belgium, Spain, Russia, United Kingdom and Germany. For other countries, pls choose shipping methods such as DHL or Fedex. Thank you for your cooperation.The SonicModell AR.Wing 900mm Drone FPV Flying Wing Kit (Frame Only)is a great all-around delta R/C wing which can be used as a standard plane or to do firstperson view flights (FPV) with video recording. To allow for different video camera, the frame comes with different camera mount (lightweight plywood) as well asmatching magnetic held nose cones. Its 3piece different noses can make customers to choose freely ,in a way, most of FPV cameras can be compatible with Such asGopro Hero 4/5 series,Runcam 2/3/HD series as well as Foxeer series etc...Description:Brand Name: SonicmodellItem Name: AR Wing Wingspan: 900mm(35.43")Length: 482mm(18.97")Flying Speed: 10km/h - 80+km/hRequired Parts for AR Wing (Not Included):Motor: 2204 2200kv (Shaft Diameter: 5mm)ESC: 20A 2-3sServo: 2pcs 9g digital servoPropeller: 6x3 ( 5-6" multirotor props also compatible)Video Transmitter: AIO 5.8Ghz 200mW 40ch VtxFPV camera: 600TVL 120FOVControl System: 2.4G 6CHBalance Charger: 2-3S chargerBattery: 11.1V 2200mAh 25C LipoCompatible Cameras: Gopro H3/H4/Session, Runcam2/3 HD, Foxeer HS1177 Features:Compared with such similar drone in the market,the advantages of Sonicmodell AR. Wing have:Bigger wingspan for larger upload,more choice for DIYsBigger ESC much more useful for motorSpacious equipment bay for more FPV gear; Battery Max 3S 2200-2600mAhDetachable wing and wingtip for AR. Wing as well as its No Glue Assembly Design much more conventient for user to storage and carry,open box and fly iin few secondsMultiple bonus camera mount,compatible for all FPV cameras in the market,such as Gopro Hero 4/5,Runcam 2/3/HD, Foxeer etc...With bump for "CG"market under the mainwing to find out "CG"with on difficultyMoveable battery slot for better"CG"adjustmentWith 2 skids for hand launch grip and landing to protect wing very well during taking off & landingWith" NACA" Air inlet and outlet for FPV gear coolingDigital 9g Servo much better than an analog one to be sure of faster speed and more accurateEasy and stable flying performance, 10km/h - 80km/h flying speedExactly the same motor / ESC / prop / camera with racing quads, exchangeable between each otherBeautiful and attractive sticker design easy to watch while flyingNote: This item does not include any electronic devices.Package Included:1x Sonicmodell AR Wing 900mm Wingspan Flywing KIT

    $69.99

    SKU:SMAR9-K

    Weight: 1.50 kg

  • Skyzone THEER FPV Flying Wing 860mm Wingspan EPP RC Airplane with PDB & LED Board - KIT Version

    Skyzone THEER FPV Flying WingEMS latest notice:Due to the high season. Only the following countries can choose EMS shipping for plane orders: Hong Kong, Taiwan, Singapore, Philippines, Japan, Canada, Australia, France, South Korea, USA, Italy, Belgium, Spain, Russia, United Kingdom and Germany. For other countries, pls choose shipping methods such as DHL or Fedex. Thank you for your cooperation.The Theer is the first flying wing from Skyzone. Skyzone Theer FPV Racing Wing is a fantastic RC Electric FPV Flying wing. Skyzone has taken good consideration into designing this FPV Racing Wing. Skyzone Theer is amazingly fast and very Stable FPV Racing wing that will suit all FPV Styles. Whether its just Fun FPV Flying, or Slopes soaring or High Speed FPV Pylon Racing, Skyzone Theer will always amaze you with its ultra fast screaming flight performance. Skyzone Theer comes PNP and in Kit versions. PNP version is capable of taking 3S batteries for smooth and fast FPV Flights. For Speed Fanatics and advance pilots, you can just slap in a 4S battery and Theer will offer a Jaw dropping high speed flight performance and speeds up to 180km on its stock setup. This is a Flying Bullet.Description:Brand Name: SkyzoneItem Name: THEERMaterial: EPPWingspan: 860mm / 33.8inLength: 385mm / 15.2inRecommended Parts for Skyzone THEER (Not Included):Motor: 2204 - 2305 KV2300 - KV2600ESC: 20A - 30AServo: 9g x2Propeller: 5040 / 5045 / 6040Battery: 3S - 4S 1300mAh - 2200mAh LiPoCharger: Balance ChargerRadio System: 2.4G 3CHVtx: 5.8G Camera: Gopro 5 / Session 4 / Foxeer BoxFlight Controller: Compatible with almost all flight controllerFeatures:EPP material, lightweight and durable.With strong magnetic hatch and carbon fiber control surface.With skin packing the wing leading edges and specific position for Vtx,well protection.With multi-color LED light strip,has adjustable multiple flash modes.Compatible with Gopro 5 / Session 4 / Foxeer Box camera.Note:This KIT version does not include any electronic device.Package Included:1x Skyzone THEER 860mm Wingspan EPP FPV Flying Wing RC Airplane KIT

    $79.99 $69.59, Save 13% OFF

    SKU:SZT86-K

    Weight: 1.20 kg

  • Skywalker SMART 996mm Wingspan EPO FPV Racing Wing RC Airplane Kit

    EMS latest notice:Due to the high season. Only the following countries can choose EMS shipping for plane orders: Hong Kong, Taiwan, Singapore, Philippines, Japan, Canada, Australia, France, South Korea, USA, Italy, Belgium, Spain, Russia, United Kingdom and Germany. For other countries, pls choose shipping methods such as DHL or Fedex. Thank you for your cooperation.Skywalker Smart VS Feather X210FPV wing racing is growing quickly and has the potential of being bigger than mini quad racing due to the facts that wings are faster than miniquads and easier to see in a race. Being easier to see in a race allows spectators to feel more involved while watching an event. This potential has been noticed by Skywaker and now Skywalker is throwing in their own design ideas with Skywalker Smart. Skywalker Smart is a dual motor design that is focused on serious power, allowing the user to climb to speed over 140kph. Featuring a 996mm wingspan, Skywalker Smart is large enough to get all your gear in the air but small enough to ensure lightning fast speeds with quick and agile air manuevers. Skywalker Smart can have several different methods of take off with two most common methods of take off being hand tossed or vertical launch. Skywalker Smart FPV Racing Wing doesn’t stray to far away from the mini quad racing scene and if your familiar with mini quads you’ll feel right at home with this built. The motors, escs, fpv gear ,and flight contollers are all the same specs that you find in your typical mini quad build. Recommended motors are 2206 2300kv with 35a ESC combinations. For awesome flight controller preformace with the much need PWM out puts servo and motor connection we recommend X-Racer F4 flight controller. You can find a review and detailed description by Oscar Liang here.Specification: Wing span: 996mmFuselage length: 430mmWing area: 25.9m2C.G.: From head to back 240-250mmFlying weight: 750g-1000gTakeoff:Hand castLanding: Belly LandingAir speed: 60km/hMaximum flying time: 30minRecommended configuration: (not included)Motor: 2206kv2300*2pcs ESC: 30A*2pcsServos: 12g*2pcsPropeller: 5045E/ep*2pcsBattery:4s 1500-3300mahRadio: 3CH 2ServosExcellent inner layout setting, perfect for FPV racing.Skywalker custom made metal motor seat, ensures the flight stability.Double motors design, powerful and reliable.The wing is attached with PCB plate and the small wing is connected with the copper clylinder, easy to assemble, disassemble and carry.Design with two different hatches, suitable for the placement of different cameras. Following up the principle of convenience, the Skywalker SMART uses magic claps and magic belts for easy use.The bottom is attached with thin film, protected from the scratching with two layers. 

    $59.99 $54.59, Save 9% OFF

    SKU:SWSM96

    Weight: 1.00 kg

  • Jie-star Skyhunter X8 FPV Foldable RC Drone

    Jie-star Skyhunter X8 V2Foldable design? Aerial photography? One key return and one key landing? Headless mode? WIFI and transmitter control? Yes, yes, yes !!! The new Jie-star Skyhunter X8  V2quadcopter has all the functions you are looking for? Easy to control, easy to carry. Flying a drone has never been so easy.JIE-STAR SKYHUNTER X8 RC quadcopter V2 is an incredible UAV whose arms and landing skids can be folded manually, making it barely bigger than your palm. It is ready to fly out of the box. Therefore, you can put the drone into nearly any bag for an outdoor activity. SKYHUNTER is a multicopter intended for beginners since One Key Takeoff, One Key Landing, One Key Return are easily accessible so that you can control the drone with ease.JIE-STAR SKYHUNTER X8 is no doubt one of the most popular portable drone on the market. FPV Model is a business partner of Jie-star, while others sell the X8 for over 60, here we are giving you a special price of $44.99. Check the link below, to see what others say at Youtube.Features:Wifi transmission system provides easy and fun FPV flight0.3MP camera can take photos and record videosBarometer set height function for precisely hold the heightFoldable design, portable and easy to carryH/L speed mode, 3D eversion, headless mode, one-key taking off/landing, one-key return function for cool flying3.7V 650mAh Li-po battery for about 5-7mins working timeUpgraded 2.4G 4CH transmitter for your easy controlThe latest 6-axis flight control system, provides super stable flightUnique fuselage design and high quality painting, outstanding appearanceSpecifications:Model name: X8TWColor: Black / WhiteRemote control: 2.4GHz / 4 ChannelsController Mode: Mode 2Main Material: ABSMotor type: brushed motorCamera pixel: 0.3MPFPV transmission: wifi real-timeFunction: forward/backward, up/down, left/right, sideward flight, hovering, 3D flips, H/L speed, headless mode, one-key taking off/landing, one-key returnRemote distance: about 80-100mCharging time: about 90minsFlying time: about 5-7 minutesQuadcopter battery: 3.7V 650mAh Li-po battery (35 * 30 *10mm)Transmitter battery: 2 * AA (not included)Item dimension:Unfolded: 290 * 290 * 90mm / 11.4 * 11.4 * 3.5inFolded: 120 * 95 * 55mm / 4.7 * 3.7 * 2.2inItem weight: 135gPackage list:1 * JIE-STAR X8TW RC Quadcopter1 * Transmitter (Mode 2)1 * 3.7V 650mAh Li-po Battery2 * Pair Spare Propellers1 * USB Charger1 * Phone Retaining Clip1 * Screwdriver1 * English ManualNOTE: Smartphone NOT included.New upgraded version with carry bagRegular Version with decent packing:

    $44.99-$48.99

    SKU:JSX8D

    Weight: 0.80 kg

  • ZMR180 FPV Starter BNF Package

    ZMR 180 Carbon FPV Mini Quad - Full Review By BMSWebThe ZMR180 is a micro quad designed with "fun" in mind. Agile, quick, and small all fit together with this kit and its a blast to fly. Keeping simplicty in mind this frame has high quality 3mm bottom plate and a 1.5 mm top plate. Parts Included:1 x ZMR180 Frame4 x Dragonfly MC1806 2300KV Mini Motor 1 x X-Racer F4 Flight Controller4 x DYS XS 20A 3-4S ESC1 x RunCam Swift Mini 600TVL FPV Camera (Update on November 29th.)1 x Dragonfly 5.8G 48CH Vtx10 Pairs x DYS 4040 3-Leaf Propeller1 x MATEK PDB XT60 with BEC 5V/12V1 x Dragonfly Booster 5.8G 3dBi TX/RX FPV Antenna RP-SMA1 x XT60 power plug connector MaleNote: The frame have color Black and Red. We send by random. If you have the specified color, please leave a message at the check out page, thank you! Note: The battery that shown in the pictures is not included in the ARF combos.

    $199.99

    SKU:ZMR180PTM1

    Weight: 1.20 kg

  • RunCam Micro Swift 2 FPV Camera

    This is the new Micro Swift 2 from Runcam with some new features comparing to the 1st generation Runcam Micro Swift. One touch setting with 5 preset scenes, easy to switch the colors to suit your flying environment. No more headache to set with your OSD.  Low voltage alarm: The Micro Swift 2 comes with Vbat. You can change the voltage, or set a lowest voltage value. When the actual voltage is lower than what you set, it will warns you by changing the color.Parameters:Package:

    $34.90

    SKU:RCMS2

    Weight: 0.10 kg

  • BattleRC 5.8G FPV Micro VTX Clover Antenna 70mm

    The sale are limited to only 30 qty! Hurry before they are sold out!A new must for FPV. These are the 5.8G FPV Micro VTX Clover Antennas from Battle RC with VSWR less than 1.5. The "Clover Leaf" design of the antenna gives you great 360 degrees of FPV coverage. Every piece of the antenna has been strictly tested in and after production. Specifications:Impedance: 50ohmVSWR: <1.5Frequency: 5.72GHZ, 5.74GHZConnector: IPEX Weight: 2g±0.3Length: 70mmType: RHCP

    $7.00

    SKU:4LAIC

    Weight: 0.10 kg

  • BattleRC 60mm Micro 5.8G FPV VTX Linear Antenna Ipex 3pcs

    Specifications:Frequency: 5.7~5.9Ghz VSWR:  ≤2.5 @5700 MHz ~5900 MHzGain definition: 2dBi ( *Typical* )Band definition: 4900 MHz ~5900 MHzImpedance definition: 50 ohmSignal transmission directionality: High Gain omnidirectional antennaConnector type: Ipex connector Antenna Length: 60MM

    $12.50 $11.38, Save 9% OFF

    SKU:3RG178

    Weight: 0.28 kg

  • BattleRC Micro 5.8G FPV VTX Antenna 60mm 3pcs

    Electrical Specifications:Frequency Range (MHz): 5100-5150/5750-5800Bandwidth (MHz): 50/50Input Impendence (Ω): 50V.S.W.R: ≤1.5Gain (dBi): 2.0Polarization Type: Vertical polarizationLightning Protection: DC groundingPower Capacity (w): 50Mechanical Specifications:Antenna Length (mm): 60MM±1MMRadiator: CuprumConnect Type: WeldingWorking Temp(℃): -40~60Storage Temperature(℃): -20~40Weight (g) :0.5±1

    $12.50 $7.50, Save 40% OFF

    SKU:3FMQA

    Weight: 0.10 kg

  • Skywalker X5 Pro 1280mm Wingspan EPO FPV Flying Wing RC Airplane ARF

    EMS latest notice:Due to the high season. Only the following countries can choose EMS shipping for plane orders: Hong Kong, Taiwan, Singapore, Philippines, Japan, Canada, Australia, France, South Korea, USA, Italy, Belgium, Spain, Russia, United Kingdom and Germany. For other countries, pls choose shipping methods such as DHL or Fedex. Thank you for your cooperation.X5 PRO is such a meticulous build for professional clients in the field of aerial survey, of which equipment installation are distributed orderly, such as SONY ILCE-QX1 camera slot, image transmission, parachute cabin or other platform.Through a large number of optimization design and repeated flying testing, it can complete high quality flying, aerial shots and aerial mission in complex environment with real-time dynamic control system on the fuselage.CharacteristicsAdopted EPO material, light and sturdy.Large capacity cabin, reasonable area distribution,such as parachute cabin, camera slot, GPS and other professional platform.Stable and flexible flying.Module design, disassemble and assemble easily and conveniently.Special winglet design, small resistance, long range, precise operation.Specification: Material: EPOWingspan: 1280mmOverall Length: 717mmFlying Weight: 1800-2500g Wing Area: 44dm2Servo: 12g*2Motor: 2816 840KVESC: 60ABattery: 4S 14.8V 5200mAh(Not included) Propeller: 1060ENote: This is the ARF version,not includes the transmitter, receiver,battery and charger.  Before purchasing: Please take a note that the items included in the ARF might be a bit different from above list due to made in different batches, and some specifications might be changed as well.

    $289.00 1

    SKU:SWX5P-WP

    Weight: 3.00 kg

  • Skywalker X5 Pro 1280mm Wingspan EPO FPV Flying Wing RC Airplane KIT Only

    EMS latest notice:Due to the high season. Only the following countries can choose EMS shipping for plane orders: Hong Kong, Taiwan, Singapore, Philippines, Japan, Canada, Australia, France, South Korea, USA, Italy, Belgium, Spain, Russia, United Kingdom and Germany. For other countries, pls choose shipping methods such as DHL or Fedex. Thank you for your cooperation.X5 PRO is such a meticulous build for professional clients in the field of aerial survey, of which equipment installation are distributed orderly, such as SONY ILCE-QX1 camera slot, image transmission, parachute cabin or other platform.Through a large number of optimization design and repeated flying testing, it can complete high quality flying, aerial shots and aerial mission in complex environment with real-time dynamic control system on the fuselage.CharacteristicsAdopted EPO material, light and sturdy.Large capacity cabin, reasonable area distribution,such as parachute cabin, camera slot, GPS and other professional platform.Stable and flexible flying.Module design, disassemble and assemble easily and conveniently.Special winglet design, small resistance, long range, precise operation.SpecificationsWingspan:1280mmFuselage length:717mmWing area:44dm2Flying weight:1800-2500gRecommended Cofiguration (not included)Motor:2816KV840ESC:70AServo:12g*2pcsPropeller:1060EBattery:4S 5300mahRadio:3CH 2SERVO

    $179.00

    SKU:SWX5P

    Weight: 3.00 kg

  • BrotherHobby Tornado T2 2206 2600kv Brushless Motor for FPV Multicopters

    Brotherhobby has created these 2206 T2 series of motors with a unique design. The bell design has a new look, the body is made of solid 7075 aluminum, and the motor itself features 1.75mm thick N52H arc magnets. All while only weighing about 31g. With these magnets you dont need to sacrifice structural integrity for low weight, you can have both.  Great response time and power.SpecificationsConfiguration:12N14PNo.of Cells(Lipo): 3-5SRotor: 1.75mm N52H arc magnetsWire AWG: 20AWGWiring config Single-stranded: 1 x 0.55mm Delta DLRKStator: 0.15mm Nippon Steel silicon steelBearings: Japanese NSKBase casing: Al 7075Bell cap: Al 7075Weight: 30.8G

    $23.99 $21.83, Save 9% OFF

    SKU:T2-2206

    Weight: 0.10 kg

Find us on Google+ Watch us on Youtube Like us on Twitter Follow us on Facebook

Home   |   About Us   |   New Products   |   Multi-Rotors   |   FPV Airplanes   |   FPV Equipment   |   Battery / Chargers   |   Tools & Accessories   |   Contact Us   |   Blog   |  Site Map

Product Tags: ABCDEFGHIJKLMNOPQRSTUVWXYZ0-9

Copyright © 2015 FPVMODEL.COM®. All Rights Reserved.