Sorted:
  • *Pre-order* Skyzone SKY03 3D FPV Goggles

    Skyzone SKY03 FPV GogglesExpected shipping date: December 20th, 2017Skyzone is a professional manufacturer of FPV goggles, now here comes the third generation 3D FPV goggles named SKY03. The SKY03 is an upgraded version of the famous SKY02S 3D FPV goggles. They boast a great feature set, comfortable to wear and fit a wide range of eyesight conditions as well. They look very nice in the renders on the video shown above and we are excited to see what these will look like in person and more importantly, how they will feel and perform. As a business partner of Skyzone, FPV Model will be the first on the market to receive the SKY03 FPV goggles. Heres a list of features and specs:With Head Tracking functionDiversity Receiver Module with Dual Antennas ISM 5.8GHz 48-channerl diversity receiverSupport HDMI, DVR, AV IN/OUTBuilt with Front Camera Up to 43 Degree FOVBinocular Display,SVGA 800X600 resolution,binocular display.Multiple LED Light effect mode support.Intimate Design of Human MechanicsThe two 5.8GHz wireless receiver modules, the two independently workable display modules and the new DVR system used to support the 2D & 3D display modes are built in the SKY03 FPV goggles. The wireless receiver system can work in the diversity receiver mode to improve the receiving effect. In this mode, the channel and band settings for wireless receiver can be compatible with most of the conventional ISM 5.8GHz transmitters, in order to support the 6 bands and the 48 channels (for detailed bands and channels, see the specification).The matching 3D camera SCAM303 and the conventional 5.8G transmitter can be put into use in the 3D mode. The two lenses of the 3D camera can be set for shot by means of the parallel method. When the camera is set for a certain close shot, the third dimension will be enhanced effectively. When the camera is set for a long-distance shot, the third dimension will be weakened, but the more vivid visual experiences will be presented as a whole.The new DVR system can not only further enhance the quality of analog video recording, but also can make use of the high-quality H.246 video compression technology to better restore the video screen, save the more storage space, support the 128GB high-capacity memory card(UHS-I U1), and support the automatic video recording function. For details, see the description of the "Video" section.

    $459.00

    SKU:SKY03

    Weight: 0.90 kg

  • Skyzone THEER FPV Flying Wing 860mm Wingspan EPP RC Airplane with PDB & LED Board - KIT Version

    Skyzone THEER FPV Flying WingEMS latest notice:Due to the high season. Only the following countries can choose EMS shipping for plane orders: Hong Kong, Taiwan, Singapore, Philippines, Japan, Canada, Australia, France, South Korea, USA, Italy, Belgium, Spain, Russia, United Kingdom and Germany. For other countries, pls choose shipping methods such as DHL or Fedex. Thank you for your cooperation.The Theer is the first flying wing from Skyzone. Skyzone Theer FPV Racing Wing is a fantastic RC Electric FPV Flying wing. Skyzone has taken good consideration into designing this FPV Racing Wing. Skyzone Theer is amazingly fast and very Stable FPV Racing wing that will suit all FPV Styles. Whether its just Fun FPV Flying, or Slopes soaring or High Speed FPV Pylon Racing, Skyzone Theer will always amaze you with its ultra fast screaming flight performance. Skyzone Theer comes PNP and in Kit versions. PNP version is capable of taking 3S batteries for smooth and fast FPV Flights. For Speed Fanatics and advance pilots, you can just slap in a 4S battery and Theer will offer a Jaw dropping high speed flight performance and speeds up to 180km on its stock setup. This is a Flying Bullet.Description:Brand Name: SkyzoneItem Name: THEERMaterial: EPPWingspan: 860mm / 33.8inLength: 385mm / 15.2inRecommended Parts for Skyzone THEER (Not Included):Motor: 2204 - 2305 KV2300 - KV2600ESC: 20A - 30AServo: 9g x2Propeller: 5040 / 5045 / 6040Battery: 3S - 4S 1300mAh - 2200mAh LiPoCharger: Balance ChargerRadio System: 2.4G 3CHVtx: 5.8G Camera: Gopro 5 / Session 4 / Foxeer BoxFlight Controller: Compatible with almost all flight controllerFeatures:EPP material, lightweight and durable.With strong magnetic hatch and carbon fiber control surface.With skin packing the wing leading edges and specific position for Vtx,well protection.With multi-color LED light strip,has adjustable multiple flash modes.Compatible with Gopro 5 / Session 4 / Foxeer Box camera.Note:This KIT version does not include any electronic device.Package Included:1x Skyzone THEER 860mm Wingspan EPP FPV Flying Wing RC Airplane KIT

    $79.99

    SKU:SZT86-K

    Weight: 1.20 kg

  • Skyzone SKY02S V+ 5.8G 48CH 3D FPV Goggles Only

    Skyzone SKY02S V+ 3D 5.8G 48CH FPV Goggles w/ VTX, 3D Camera, Head Tracking, HDMI, DVRThis is the latest version of Skyzone 3D 5.8G 48CH FPV goggles with VTX, 3D Camera, Head Tracking, HDMI and DVR that released in July 2016. Please take note that the option "Goggles Only" includes the goggles only without VTX and 3D camera.The new Skyzone SKY02S V+ 5.8G 48CH 3D FPV Goggles are an upgrade of previous Skyzone 3D Goggles. These new goggles remain all the features of previous versions, including 3D/2D mode, built-in DVR with playback, head tracking, built-in front camera etc, and add some new features like HDMI-IN, channel auto searching, new eyeshade with headband for a more comfortable wearing.SKY02S V+ FPV goggles are built-in with two 5.8GHz receiving modules, two antenna ports and two independently-working display modules, bringing you 3D FPV flight experience (SCAM302 3D camera and STX202 two-way transmitters required). The two lens of the 3D camera work in the parallel manner so that 3D effect can be enhanced for close shot and reduced for long shot, bringing people an overall vivid visual experience.SKY02S V+ FPV goggles can also work in routine diversity reception mode. In such mode, it displays common 2D images. Its radio channel and band settings may be compatible with STX202 and other 5.8GHz transmitters, and in total it supports bands and 48 channels ( see the Specifications Description for details )These goggles come as an all in one package so you don’t have to worry about purchasing a set of goggles then needing to buy a receiver or even yet a dual diversity receiver system that adds much expense to the overall cost of goggles. These goggles even come with a built in DVR just add a micro SD card and you are good to go. Head Tracking? Yep! It’s included! No need to go out and buy an expensive tracker if that’s what your into. When comparing these goggles to other goggles there’s not much of a comparison. The others are just goggles. Skyzone Sky02S V+ are the whole package! Save some of they money you would spend on building another set of goggles and spend that savings on something that can fly! Features:-3D mode (SCAM302 3D camera and STX202 two-way transmitters required)-2D diversity mode-HDMI in-Channel auto searching-Dedicated eyeshade with headband for more comfortable wearing-Screen OSD-Built-in DVR with playback-Built-in 48CH 5.8G Diversity receiver with raceband, compatible with most FPV 5.8G transmitters on the market (Fatshark,DJI,Walkra,Boscam etc)-Built-in self-calibrating head tracking (gyro, inertial and compass)-Built in dual 854X480(WVGA) monitors, 1,229,760 color sub-pixels-Built-in external camera for surrounding view (640X480,VGA)-AV in/ AV out/ Earphone socket (with volume control)-Adjustable interpupillary and diopter for your eyes-Adjustable brightness and contrast-Complete plug and play kit                

    $450.99 $315.69, Save 30% OFF

    SKU:SKY02SS-P

    Weight: 0.90 kg

  • Skyzone RX5803 5.8G 48CH A/V Receiver Module for FPV

    The RX5803 from Skyzone is an FM A/V receiver demodulated module that works in the ISM band of 5725-5865mHz. This receiver module adopts sigle chip design which has intergrated VCO, PLL, broadband FM video demodulation and FM sound demodulation. The RX5803 is of small size and low power consumption. It will just occupy a small part of your FPV multirotor.Simple to use. Just need to power on, plug in the audio and video cables, and connect to the antenna, then you will receive the A/V signal.Features:- 5.8G broadband FM audio and video synchronization reception.- Small size: 35*24*3.5 mm- 5V 170mA Low power consumption.- High reception sensitivity:  -95dBm- Built-in frequency phase - locked loop high stability.- Low clutter leak: Complies with CE, FCC requirements.- Direct output analog audio, video signal.- 48 channel receptionFrequency range:

    $9.99

    SKU:RX5803

    Weight: 0.10 kg

  • Skyzone 5.8G 25mW 48 Channel Transmitter with Camera

    Features:1. When the camera is powered on, the red and blue LED lights are on at the same time.Then the blue light starts to flash, the number of blinks represents current active channel. The red light starts to flash, and the number of blinks represents current active band.2. Short press 0.5 seconds once, for the operation channel. Channel 1-8 is cycle working and corresponds to the number of times the channel indicates the blinking blue light. Refer to the channel list below.3. Press and hold for 3 seconds, and the red and blue LED flashes at the same time, the number of blinks represents current active band. (A band flashes once, B band flashes twice, by analogy. E-3;F-4;R-5;L-6.) 3 seconds without key operation, automatic exit frequency band operation mode, return to normal display mode. Specs:Frequency range:

    $23.99 $15.59, Save 35% OFF

    SKU:SJCT100

    Weight: 0.10 kg

  • Original Replacement Sponge Foam Pad for Skyzone 3D Goggles

    High Quality Original Replacement Sponge Foam Pad for Skyzone 3D Goggles. 3M back glue, easy to paste.Except the Skyzone goggles, this foam pad is aslo fitting the Fatshark goggles. No more light leaks and more comfortable.Specification:Item name: Original Sponge Foam PadsQuantity: 1PCSuitable for the Skyzone 3D FPV Goggles, Fatshark goggles.* Pictures from the internet, credit to the foam pad users.

    $4.99 $3.89, Save 22% OFF

    SKU:SZSP

    Weight: 0.10 kg

  • STX202 Dual Transmitter for Skyzone SKY02S V+ Goggles

    Please note that STX202 Dual Transmitter is a replacement part of Skyzone SKY02S V+ FPV Goggles. It may not be compatible with other goggles or products.Dual Transmitter STX202 Specifications:

    $45.99 $35.87, Save 22% OFF

    SKU:STX202

    Weight: 0.15 kg

  • SCAM302 3D Camera for Skyzone SKY02S V+ Goggles

    Please note that SCAM302 3D camera is a replacement part of Skyzone SKY02S V+ FPV Goggles. It may not be compatible with other goggles or products.SCAM302 3D camera Specifications:Fov:120 degreesF/No=2.3IPD:40mmResolution:720*576Video format: PAL / NTSC ( optional )Video Output Level:1.0Vp-p Typ./75ohmPower Supply:DC 5.0V/0.5APower Consumption:1.6WDimensions:56.5*17.8*14mmWeight:12gOperating Temperature: 0℃~+60℃

    $45.99 $23.00, Save 50% OFF

    SKU:SCAM302

    Weight: 0.15 kg

  • Skyzone SKY02S V+ 5.8G 48CH 3D FPV Goggles w/ VTX, 3D Camera, Head Tracking, HDMI, DVR

    Skyzone SKY02S V+ 3D 5.8G 48CH FPV Goggles w/ VTX, 3D Camera, Head Tracking, HDMI, DVRThis is the latest version of Skyzone 3D 5.8G 48CH FPV goggles with VTX, 3D Camera, Head Tracking, HDMI and DVR that released in July 2016. Please take note that the option "Goggles Only" includes the goggles only without VTX and 3D camera.The new Skyzone SKY02S V+ 5.8G 48CH 3D FPV Goggles are an upgrade of previous Skyzone 3D Goggles. These new goggles remain all the features of previous versions, including 3D/2D mode, built-in DVR with playback, head tracking, built-in front camera etc, and add some new features like HDMI-IN, channel auto searching, new eyeshade with headband for a more comfortable wearing.SKY02S V+ FPV goggles are built-in with two 5.8GHz receiving modules, two antenna ports and two independently-working display modules, bringing you 3D FPV flight experience (SCAM302 3D camera and STX202 two-way transmitters required). The two lens of the 3D camera work in the parallel manner so that 3D effect can be enhanced for close shot and reduced for long shot, bringing people an overall vivid visual experience.SKY02S V+ FPV goggles can also work in routine diversity reception mode. In such mode, it displays common 2D images. Its radio channel and band settings may be compatible with STX202 and other 5.8GHz transmitters, and in total it supports bands and 40 channels ( see the Specifications Description for details )These goggles come as an all in one package so you don’t have to worry about purchasing a set of goggles then needing to buy a receiver or even yet a dual diversity receiver system that adds much expense to the overall cost of goggles. These goggles even come with a built in DVR just add a micro SD card and you are good to go. Head Tracking? Yep! It’s included! No need to go out and buy an expensive tracker if that’s what your into. When comparing these goggles to other goggles there’s not much of a comparison. The others are just goggles. Skyzone Sky02S V+ are the whole package! Save some of they money you would spend on building another set of goggles and spend that savings on something that can fly!?Features:-3D mode (SCAM302 3D camera and STX202 two-way transmitters required)-2D diversity mode-HDMI in-Channel auto searching-Dedicated eyeshade with headband for more comfortable wearing-Screen OSD-Built-in DVR with playback-Built-in 48CH 5.8G Diversity receiver with raceband, compatible with most FPV 5.8G transmitters on the market (Fatshark,DJI,Walkra,Boscam etc)-Built-in self-calibrating head tracking (gyro, inertial and compass)-Built in dual 854X480(WVGA) monitors, 1,229,760 color sub-pixels-Built-in external camera for surrounding view (640X480,VGA)-AV in/ AV out/ Earphone socket (with volume control)-Adjustable interpupillary and diopter for your eyes-Adjustable brightness and contrast-Complete plug and play kit?????????????? ?SCAM302STX202SKY02S

    $493.99 $365.55, Save 26% OFF   

    SKU:SKY02S-P

    Weight: 0.90 kg

  • Skyzone 3D FPV Goggles Face Plate Goggles Parts

    Skyzone with Face PlateWe now have face plate for SKYZONE 3D FPV Goggles. It is suit for the former V1 to V3 goggles both white and black. For  V1,V2 and V3 can be upgraded to V4 (not including software). Besides, we have cancelled the F2D model, and changed it over to search frequency automatically.Under the 2d model, enter or exit by long pressing CAMERA, and it begins to search frequency by short press. Features:3D (Need to match with 3D Camera and Dual Transmitters, package not included)Complete plug and play kitDVR built in with playbackBuilt-in 40CH 5.8G Diversity that is compatible with most FPV 5.8G transmitters on the market (Fatshark,DJI,Walkra,Boscam etc)Built-in self-calibrating head tracking (gyro, inertial and compass)Built in Dual 854X480(WVGA) Monitors, 1,229,760 color sub-pixelsBuilt-in external camera for surrounding view (640X480)AV in/ AV out/ Earphone socket (with volume control)Adjustable Interpupillary and Diopter for your eyesAdjustable brightness and contrastHeadband Plastic EyepatchSponge Mat

    $19.99 $10.39, Save 48% OFF

    SKU:SZGAC

    Weight: 0.20 kg

  • $8.99 $4.94, Save 45% OFF

    SKU:GREC

    Weight: 0.20 kg

  • Skyzone R600 OLED Display 5.8g 32ch Receiver for FPV

    Skyzone R600 OLED Display 5.8g 32ch Receiver for FPV. The reliable R600 Receiver, it works perfectly with the T600 video transmitter, also features "R" band, and 5dB more sensitive than other receivers.Basic Function:CH and FR with OLED display:

    $42.39 $20.35, Save 52% OFF

    SKU:SZR600

    Weight: 0.20 kg




Find us on Google+ Watch us on Youtube Like us on Twitter Follow us on Facebook

Home   |   About Us   |   New Products   |   Multi-Rotors   |   FPV Airplanes   |   FPV Equipment   |   Battery / Chargers   |   Tools & Accessories   |   Contact Us   |   Blog   |  Site Map

Product Tags: ABCDEFGHIJKLMNOPQRSTUVWXYZ0-9

Copyright © 2015 FPVMODEL.COM®. All Rights Reserved.