• DYS BX2212 KV920 Brushless Motor CW/CCW Black for Multirotor DJI Phantom

    Specifications:KV..............................................................................................................920Configuration....................................................................................NPStator Diameter....................................................................................22mmStator Length..........................................................................................12mmShaft Diameter.......................................................................................3.0mmMotor Dimensions(Dia.*Len)...............................................Φ22×15mmWeight(g)...................................................................................................64gNo.of Cells(Lipo).....................................................................................3-5SMax Continuous current(A)............................................................30AMax Continuous Power(W)...........................................................318WMagnet specification is 40 uh, the bearing NSK, and the core material is 0.2 mm thick ultra-low loss material, with rotor balancing process, enameled wire can be 220 °.Color:Black/White,delivery at randomType:CW wihte-cap/CCW black-cap(optional)Quantity:1 PCSlonger cable(23cm) than silver version and the plug not be soldered,you can cut the cable for the length you need and solder the plug by yourself.

    $11.50 $7.13, Save 38% OFF


    Weight: 0.20 kg

  • New Transporter Backpack for DJI Phantom Series and QRX

    New transporter backpack carrying case which will fit all DJI Phantom versions. Inner foam pre-cut for all DJI Phantom ModelsSleek designExterior protectionThe Transporter back pack is the perfect solution for the "on the go" pilot. Sleek design and rigid shell offer the convinience of a low weight travel solution all the while offering superior protection for your phantom and its valuable electronics. The Transporter is small enough to take anywhere yet large enough to house batteries, Tx, and Phantom with gimbal attached. Yes, thats need to take the gimbal off the phantom when placing in the backpack. This back pack fits both the Phantom series and The Blade QRX350. Foam is strong high density and offers your valuable electronics the protection they need. Note: Due to the large size, this Phantom Backpack can not be shipped by Registered Airmail. It only can be shipped by EMS or China Post Air Parcel.

    $125.99 $50.40, Save 60% OFF


    Weight: 2.60 kg

  • 9.4x4.3 9443 CF Carbon Fiber Prop Propeller Self-locking CW/CCW 1Pair For DJI Phantom 2/Version

    Features:- 3k Carbon material- DJI Phantom2/phantom 2 vision compatible- Higher tension, easy to install-Mounting method: built-in lock nut, hand driven installation- Length: 9.4inch- Pitch: 4.3inch- N.W.: 12g 1pcs- Includes;CW/CCW propeller 1pair

    $9.90 $8.42, Save 15% OFF


    Weight: 0.10 kg

  • Universal Wide & High Landing Skid for DJI Phamtom 1/2

    Features:- FC upgrade landing skid for DJI Phantom quadcopter- DJI Phantom and DJI Phantom 2  compatible- 35mm higher than origianl one- Material: ABS- Color: White- Includes 1pair landing skid and 8 screws

    $14.50 $2.90, Save 80% OFF


    Weight: 0.30 kg

  • Carbon Fiber Mounting Plate Adapter for DJI Phantom v1 to Tarot T-2D Brushless Gimbal GoPro3

    This is an adapter plate used to mount your Tarot T-2D Gimbal to your DJI Phantom. It is a must have. With this plate, you dont need to drill holes on your Phantom body. Simply mount your gimbal to this plate and mount this plate to the Phantom in minutes with a screw driver. No other tools needed.This plate is made of carbon fiber that is very light weight, so you can keep your whole setup as light as possible. Simply screw the 4 poles on the gimbal to the 4 holes on the 4 corners on the adapter plate, and then screw the plate onto the 2 holes underneath the Phantom and you are done. It takes less than 5 minutes instead of hours when you dont have this adapter plate.NOTE: the Mounting Plate Adapter only suit for old verion Tarot gopro gimbal .the old version Tarot gimbal is with carbon fiber plate tilt shock group.For the latest version  Tarot 2-axis gimbal we are selling:click here

    $5.99 $1.86, Save 69% OFF


    Weight: 0.10 kg

  • DJI Phantom Multifunctional Landing Gear Upgrade Kit FPV Telematry Install Plate

    Features:- Suit for DJI Phantom- Increase the original landing gear height(5cm)- Compatible with some brushless gimbal- Offer FPV telemetry installation positions - Simple design, light weight- Material: 3K silver glassy carbon plate- The first choice for Phantom FPV modify.

    $6.99 $2.94, Save 58% OFF


    Weight: 0.20 kg

  • 1555 15X55 Carbon Fiber Propeller Props CW/CCW for DJI S800 octocopter mulitrotor

    Specifications: - Material:carbon fiber - Epoxy resin cover- Size:15X5.5- High gloss 3K twill finish- Weight:14g for each prop - Very strong and light weightGood for DJI S800 With 100% carbon fiber,very strong and light  only 14g/pcsSurface treatment:3K gloss finish!Well balanceThe type A  is good for DJI S800.Quantity:1 pair (2 pcs,one pcs for CW,the other one for CCW)

    $18.90 $15.12, Save 20% OFF


    Weight: 0.30 kg

  • DJI Phantom Extended Carbon Fiber Monut Plate For AV Transmission Unit OSD

    Features - 100% Brand New- Color:Black- Special designed for DJI phantom aerial photography- 3k full Carbon fiber plate- Professional design for AV Transmission Unit ,OSD,mini camera or vice-battery on DJI PhantomPackage Contents - Carbon Fiber Monut Plate * 1- Battery Velcro * 1- Battery Strap Ties * 1- 3*200 Disposable Ties * 6  

    $10.90 $3.05, Save 72% OFF


    Weight: 0.10 kg

  • DJI IOSD mark 2 for DJI WKM ACE ONE Autopilot System

    DJI-IOSD-M2 DJI iOSD Mark II On Screen Display for DJI Wookong M WKM The iOSD Mark II On Screen Display is for the DJI Wookong M AutoPilot and Ace One series AutoPilots. The iOSD On Screen Display enables the pilot to monitor the real-time flight data from the Wookong M WKM  or Ace One Autopilot systems while in flight using First Person View (FPV).The DJI iOSD MARK II can record the flight log, which will help you to record the input and output information of every channel, GPS signal, power voltage, home distance and height, etc. (The current iOSD on the market will have flight log function after firmware upgrade.)The DJI iOSD will allow you to view the following information:Voltage.Vertical velocity.Horizontal velocity.Height.Distance from home point.Horizontal Altitude.GPS satellite number.The iOSD is a multifunctional integrated on screen display module which also has a built-in BEC module that supports 3s-6s LiPo batteries (11-26 volts), when used with the Wookong M or Ace One professional autopilot systems, it delivers a total solution for aerial photography with key information clearly displayed around the outside of the screen.The DJI Innovations iOSD only supports the Wookong M AutoPilot and Ace One systems at this time. The iOSD supports two video input sources, one of which can be selected by the R/C transmitter and switched remotely. It can also change the wireless the transmission channel using the wireless video transmission module by DJI. The iOSD can be upgrade in the future by firmware updates.PlatformSupport WooKong-M CurrentlySize52 mm x 41 mm x 11 mmWeight56gVideo Input/Output ModePAL/NTSCElectrical CharacteristicsVoltage:3S-6SCurrent(Typical Value):60mA@52.2V, 103mA@12.6VRated Power:1.25WOperating Temperature-20°C to +60°CFunctionsiOSD Information TransmissionVideo Transmission, Two Video Signal Channels Input & SwitchChannel Switch Supported for the Wireless Video Transmitter Module specified by DJIBuilt-in BEC, strengthened the drive system MC power supply reliabilityDJI Z15 Supported 

    $225.00 $90.00, Save 60% OFF


    Weight: 0.20 kg

  • DJI Naza-M V2 MultiRotor Flight Stabilization Controller with GPS Set

    Free DHL or EMS shipping.Depend on your country location.For remote area will be shipped by EMS. ALL-IN-ONE DESIGNDJI adheres to continuous innovation and improvement. With the new firmware, new attitude stabilization algorithm and optimized hardware structure, the Naza-M V2 provides better flight performance. The innovative All-in-one design simplifies installation and saves space and weight. It contains inner damping, controllers, 3-axis gyroscope, 3-axis accelerometer and barometer in its light and small Main Controller. It can measure flying altitude and attitude and therefore can be used for autopilot/automatic control.INDEPENDENT PMU WITH AMAZING FUNCTION EXTENSIONThe Naza PMU V2 has enhanced BEC functionality and provides extendable CAN BUS ports, which can support iOSD, Zenmuse H3-2D gimbal (pitch control). Support is also included for optional Bluetooth LED module to allow parameter adjustment via a mobile APP (future firmware upgrade required for this functionality)ADVANCED & IMPROVED ATTITUDE STABILIZATION ALGORITHM The latest fourth generation attitude stabilization algorithm not only inherits the outstanding flight stability of DJI products, but also provides excellent maneuverability even without the GPS module. It is more flexible and stable, and gives the hobbyists a wonderful flight experience. New features have been included such as GPS course automatic compensation, GPS & Compass sensor calibration, new take-off mode and so on.NINE TYPES OF MULTI-ROTORS SUPPORTED Naza-M V2 now supports nine types of multi-rotor, which meets the different needs of the enthusiasts.Quad I, Quad X;Hexa I, Hexa V, Hexa Y, Hexa IY;Octo X, Octo I, Octo V; ( Naza-M V2 does not support the aircraft which has large vibration, so when you choose to use hexa-rotor or octo-rotor, please use the vibration dampening devices accordingly.MULTIPLE FLIGHT CONTROL MODES/INTELLIGENT SWITCHING It offers three types of control modes: GPS Atti. Mode (with GPS module), Atti. Mode, Manual Mode. The pilot can switch between the three modes to achieve different flight characteristics. It also can adjust automatically within the flight environment and intelligently switch between GPS Atti. Mode and Atti. Mode to make sure the flight is safe and secure. In the software at the position of the manual mode you can choose manual, attitude or failsafe; it supports one key failsafe trigger.GPS MODULE AVAILABLE/ACCURATE POSITION HOLD The plug and play GPS module will greatly enhance the performance for Aerial Photography with accurate Position Hold, Return-To-Home and Intelligent Orientation Control functionalities. With the GPS Module, the multi-rotor will have position and altitude locked accurately even in windy conditions. Hovering accuracy is approximately 2.5m horizontal and 0.8m vertical.NEW ASSISTANT SOFTWARE FOR SMARTPHONE The Naza-M now provides assistant software for iPhone4s, iPhone5, iPad3, iPad4, iPadmini, iPod5. You can do parameter adjustments at any time on your mobile devices, using only the BTU with a built-in Bluetooth module which makes it easier and convenient. It uses low power Bluetooth to minimize the power consumption of your mobile devices. It is easy to use and will automatically save your last connection records. The password mechanism ensures your safety link. Parameters can be automatically synchronized to the Cloud Server and can be restored immediately when you changed your mobile devices.IOSD MINI SUPPORTED The Naza-M now supports iOSD Mini. This will undoubtedly give you a fantastic FPV flight performance. Depending upon DJI’s accumulation of historic and reliable information integration technology, the iOSD Mini can grab the most accurate first-hand flight data information in the shortest possible time.INTELLIGENT ORIENTATION CONTROLUsually, the forward direction of a flying multi-rotor is the same as the nose direction. By using Intelligent Orientation Control (IOC), wherever the nose points, the forward direction has nothing to do with nose direction:In course lock flying, the forward direction is the same as a recorded nose direction. See the following figures(Mode 1):In home lock flying, the forward direction is the same as the direction from home point to multi-rotor. See the following figures (Mode 2):ENHANCED FAILSAFE MODE If your transmitter supports failsafe, then you can set failsafe through port-U. Naza controller has built-in auto level failsafe function, which means when the communication between MC and the transmitter is disconnected, the outputs of all command sticks from controller will go to center position. If the GPS module is used, you can also set RTH on failsafe. If your transmitter has only 4 channels, then MC will work in Atti. Mode by default without the failsafe function.TWO LEVELS OF LOW VOLTAGE PROTECTIONS In order to prevent your multi-rotor from crashing or other harmful consequences caused by low battery voltage, we have designed two levels of low voltage protection. You can choose not to use this, however we strongly recommend you to enable the protection. Both levels of protection have LED warning as default. The first level will blink the red light continuously; the second level will blink red light continuously and the multi-rotor will descend and land. In manual mode when low voltage protection is triggered the LED warning will be active only.MOTOR ARM AND MOTOR DIS-ARM There are four ways to start the motors, see the following picture:When you want to start the multi-rotor, you need to perform any of the ways of CSC. During the flight, if the motors stop, you can immediately execute the CSC and the motors will start. This enhances the safety of the multi-rotor; no uncontrolled starting of the motors. Motor Disarm: There are two modes of Motor Disarm: namely Intelligent Mode and Immediate Mode. For more information, please refer to the user manual or DJI Wiki.Note: It has a brand new, smoother take-off algorithm, which is more stable and provides a brand-new experience in supporting double spring TX; every time you let go of the throttle stick it will hover.PPM, S-BUS & ORDINARY RECEIVER SUPPORTED Minimum Four channel receiver supported, also PPM and Futaba S-Bus receiver supported. PPM & S-Bus receivers (the general use of the first 8 channels of S-Bus receiver) to optimize the channel connection, the A, E, T, R, U five-channel functions are set using channel X2, use only one servo cable to connect the PPM or S-Bus to X2, this makes installation quick and easy.INDEPENDENT LED MODULEThe Independent LED module makes the indication of the flight status and the system status to the ground much clearer. The pilot can get information more quickly and more conveniently, even at night, he/she can get real-time flight information feedback through the LED flashing frequency and colour. In addition, the module has a USB interface, which is used for parameter settings and firmware upgrade.BUILT-IN GIMBAL STABILIZATION FUNCTION The gimbal stabilization module is compatible with almost all 2-axis gimbal systems. The system will adjust the gimbal and camera according to the attitude of the aircraft after setting the parameters the first time.MULTI-ROTOR ONE-POWER OUTPUT FAIL PROTECTION In most conditions, the whole multi-rotor will retain good attitude and rotate around the frame arm with no power output, due to imbalanced mechanical structure and external environment. Rotating is mainly caused by payload and external environment. When payload is heavier, rotating speed is faster. On rotating, the hexa-rotor physical structure can cause rudder to become out of control. This humanistic protection function from Naza-M V2, in Attitude or GPS Mode, keeps attitude under control even with any one power output failed and highly reduces crash risk.REMOTE GAIN ADJUSTMENT The default parameter settings are preset for you to achieve a normal flight, and also supports remote parameter adjustment by using a control slider on the TX during flight in order to obtain better performance.NEW ASSISTANT SOFTWARE & FIRMWARE ONLINE UPDATE The user interface of the assistant software has been comprehensively updated and brings you a new interaction experience. Instructions will automatically appear which is very convenient. In addition, on the left side of each menu section there is additional information. The logical design makes your parameter settings more simple and convenient. Like other DJI products the Naza-M V2 firmware can be upgraded free online.BASIC PERFORMANCESupported Multi-rotorSupported ESC outputRecommended TransmitterWorking Voltage RangeQuad-rotor I4, X4Hex-rotor I6, X6, IY6, Y6Octo-rotor I8,V8,X8400Hz refresh frequencyPCM or 2.4GHz with minimum 4 channelsMC:4.8V~5.5VVU Input: 7.4V ~ 26.0 V (recommend 2S ~ 6S LiPo)Output(V-SEN port red wire): 3A@5V(burst current:7.5A)Power ConsumptionOperating TemperatureAssistant Software System RequirementMAX: 1.5W(0.3A@5V)Normal:0.6W(0.12A@5V)-10°C ~ 50°CWindows XP sp3 / Windows 7 / Windows 8FLIGHT PERFORMANCEHovering Accuracy(GPS Mode)Max Yaw Angular VelocityMax Tilt AngleAscent / DescentVertical:±0.8mHorizontal:±2.5m200°/s35°6m/s,4.5m/sHARDWAREWeightDimensionsBuilt-In FunctionsMC:27gPMU:28gGPS:27gLED:13gMC: 45.5mm x 32.5mm x 18.5mmPMU: 39.5mm x 27.5mm x 10.0mmGPS & Compass 46mm(diameter)x10mmLED: 25mm x 25mm x 7.0mmMultiple Autopilot Control ModeEnhanced Fail-safeLow Voltage ProtectionS-Bus Receiver SupportPPM Receiver SupportIndependent PMU Module2-axle Gimbal SupportNotice:Flight Performance can be effected by mechanical performance and payloads

    $319.90 $220.73, Save 31% OFF   


    Weight: 0.50 kg

  • DJI A2 Flagship Multirotor Stabilization Controller Flight Control with GPS Pro Combo(free shipping)

    DJI A2 Flagship Multirotor Stabilization Controller Flight Control with GPS Pro ComboDJI A2 Flagship Multirotor Stabilization Controller Flight Control with GPS Pro Combo This just in! DJi releases its new flagship MR controller the A2!DJI is pleased to announce a new flagship multirotor controllerm its called the A2". superseding the Wookong family, the A2 sticks closely to the DJIs tradition of wowing customers with high specs, but it also innovates dramatically in a couple of key areas, which DJI hopes will give it an edge over the competition.DJI A2 Multi-Rotor stabilization controller is a complete flight system for various multi-rotor platforms for commercial and industrial AP applications. Based on the technology and design philosophy of DJI’s Ace series of high-performance controller, the A2 offers you a brand new flight experience. Its flight mode setup provides a seamless transition for current Ace One AP professionals. It utilizes high quality components precisely calibrated with temperature compensation in all gyros and sensors, industry renowned flight algorithm in autopilot and UAV field.Specifications:- Flight controller: 54x39x14.9mm- IMU: 41.3x30.5x26.3mm- GPS Pro:62mm(diameter)x14.3mm- PMU: 39.5x27.6x9.8mm- LED-BTU-I: 30x30x7.9mm Learn more: click here

    $1,299.00 $1,130.13, Save 13% OFF   


    Weight: 1.00 kg

  • DJI Zenmuse Z15 Gimbal Series(free shipping)

    Zenmuse gimbal with the specified camera mounted has to be combined with DJI professional autopilot system. DJI Multi-rotor Aerial Photography Platform—Spreading Wings S800 is recommended to gain the best aerial photography effect, due to advanced aircraft attitude stability control and well-rounded reliable flight platform.The most advance DJI UAV autopilot system offers the precision, stability and safety aircraft operation. In addition with 2/3 axis high-precise and high-speed attitude-stabilized gimbal of DJI original creation, and multi-functional ground station control terminal, we can assure you to take photos and videos with best quality.Three Working Modes· Orientation-locked control· Non orientation-locked control· FPV mode (Reset)Choose which gimbal you need,we will do fast free shipping for you.Click here for more details 

    $2,499.00 $2,449.02, Save 2% OFF   


    Weight: 1.50 kg

Find us on Google+ Watch us on Youtube Like us on Twitter Follow us on Facebook

Home   |   About Us   |   New Products   |   Multi-Rotors   |   FPV Airplanes   |   FPV Equipment   |   Battery / Chargers   |   Tools & Accessories   |   Contact Us   |   Blog   |  Site Map


Copyright © 2015 FPVMODEL.COM®. All Rights Reserved.