1 Features1.1 Special core program for multi-rotor controllers greatly improves throttle response.1.2 Specially optimized software for excellent compatibility with disc-type motors.1.3 All settings except the timing are preset, making usage simple, highly intelligent and adaptive.1.4 The twisted-pair design of the throttle signal cable effectively reduces the crosstalk produced in signal transmission and makes flight more stable. 1.5 Compatible with various flight-control systems and supports a signal frequency of up to 621Hz (Note: all throttle signals over 500Hz are non-standard signals) .1.6 Special drive chip has much better MOSFET driving effect than common driving circuit consisted of discrete components.1.7 MOSFET with extra-low resistance brings high performance and great current endurance.Specification: - Transient current: 60A - Continuous current: 40A - BEC: NO - Battery pack: 2-6S - Weight: 26g - Dimension: 68*25*2.7mm
$12.90 $11.00, Save $1.90 OFF
Weight: 0.10 kg
NOTE:TYPE B WITHOUT MOTOR WIRES, CONNECTORS ARE WELDED DIRECTLY TO THE PCB BOARD.1.1 Output: Continuous 30A, burst 40A up to 10 seconds. 1.2 Input Voltage: 2-6 cells lithium battery or 5-18 cells NiMH battery. 1.3 BEC: Not available. 1.4 Refresh rate of the throttle signal: 50Hz to 432Hz. 1.5 Control Signal Transmission: Optical/electrical coupled system. 1.6 Max Speed: 210000rpm for 2 Poles BLM, 70000rpm for 6 poles BLM, 35000rpm for 12 poles BLM. (BLM = BrushLess Motor) 1.7 Size: 55mm (L) * 25mm (W) * 12mm (H). 1.8 Weight: 31g.2 Features2.1 High performance microprocessor, best compatibility with all kinds of motors, highest driving efficiency.2.2 Optimized for multi-rotor aircraft. 2.3 Smooth, linear, quick and precise throttle response.2.4 Multiple protection features: Low-voltage cut-off protection / Over-heat protection / Throttle signal loss protection.2.5 The throttle signal is transfered through optical/electrical coupled system to avoid electromagnetic interference.2.6 The firmware of the ESC can be updated through the built-in USB adapter in the Professional LCD Program Box.2.7 User programmable. 2.8 Multiple program methods supported: transmitter stick, Digital LED Program Card, Professional LCD Program Box, PC software. Very easy to program the ESC at home or at the flying field.
$21.00 $12.39, Save 41% OFF
Weight: 0.20 kg
FlyFun-60A1 Specification:1.1 Output: Continuous 60A, Burst 80A up to 10 Secs.1.2 Input Voltage: 2-6 cells lithium battery or 5-18 cells NiCd/NIMh battery. 1.3 BEC: 3A / 5V1.4 Max Speed: 210,000rpm for 2 Poles BLM, 70,000rpm for 6 poles BLM, 35,000rpm for 12 poles BLM. (BLM: BrushLess Motor)1.5 Size: 70mm (L) * 31mm (W) * 14mm (H).1.6 Weight: 63g.1.7Refresh rate of the throttle signal: 50Hz to 432Hz2 Features2.1 Safety Arming Feature: Regardless the throttle stick position, the motor will not spin after battery connected.2.2 Throttle Calibration: Throttle range can be configured to provide best throttle linearity, fully compatible with all market available transmitters.2.3 Programmable Items: Brake Setting: brake enabled / brake disabled. Battery Type: Li-xx(Li-ion or LiPo) / Ni-xx(NiMh or NiCd). Low Voltage Protection Mode(Cutoff Mode): Gradually reduce the output power / Cutoff the output power. Low Voltage Cutoff Protection Threshold (Cutoff Threshold): low / medium / high. Start Mode: normal / soft / very soft. Timing: low / medium / high. Reset: reset all the programmable items to their default settings.2.4 Full Protection Features: Low voltage cutoff protection / Over-heat protection / Throttle signal lost protection.3 Advantages3.1 Military standard capacitor of extreme low resistance increases the ability of prevention of unwanted RF noise during flying.3.2 Extreme low resistance PCB is used at the power output section, the whole ESC has super current endurance capability.3.3 Microprocessor uses separate voltage regulator IC, with good anti-jamming capability
$41.90 $34.36, Save 18% OFF
Find us on Google+ Watch us on Youtube Like us on Twitter Follow us on Facebook
Copyright © 2015 FPVMODEL.COM®. All Rights Reserved.