Sorted:
  • Dragonfly Hurricane 2207 KV2500 Brushless Motor for FPV Racer

    Specially deisigned for FPV racing with extreme performanceFast response and ultimate efficiencyNew technology to ensure smooth runningPrecise balanced and fully testedPowerful, reliable, and quick. This is the latest Dragonfly Hurricane 2207 2500KV brushless motor that specially designed for FPV racing and extreme performance. These Dragonfly Hurricane 2207 2500kv motors feature an open air base to allow for more efficient cooling of the motors. Weighing in at just 30.5 grams helps eliminate some weight compared to other motors and fits with most racers desire to shave precious grams off builds wherever they can.Features:Featuring 20awg silicone wire, N52SH magnets and Japanese NSK bearings these motors are sure to fit the needs of most FPV racers.We use high quality aluminum and rare-earth magnetic materials, and redesigned the magnetic circuit of Dragonfly Hurricane to make sure the motors come with a better loading capacity.We have greatly improved their thrust and efficiency comparing to other motors on the market. At the same time, we have enhanced the response speed to guarantee the smooth flying of your racing quadThe use of special aluminum material for body structure, not only comes with a greater strength than those motors made of the 6 series aluminum that most other motors use, but also greatly reduce the weight. The motor shaft has abandoned the traditional way of installation, the spindle completely goes through the threaded shaft to improve the friction between steel shaft and threaded sleeve of head cover. It also improves the concentricity of motor rotor and effectively increases the strength of propeller shaft, so that to make sure the motor can survive from the hard crashes.The Draongfly Hurricane has added an insulation film between bottom cover and spindle to isolate the connection between screws and copper wires. In this way, the motor is able to prevent from short circuit and leakage that caused by misoperation.Specifications:KV: 2500KVNo.of Cells(Lipo): 3-5SConfiguration: 12N14PStator Diameter: 22mmStator Length: 7mmShaft Diameter: 5mmMotor Dimension (Dia.*Len): Φ27.9×32.7mmWeight(g): 30.3g(Excluding Cable)Recommend Propeller: 5″Recommend ESC: 30-50AWire AWG: 20AWG|Magnet: N52SH Stator: Japan KAWASAKIBearings: NSKThese Dragonfly Hurricane 2207 2500kv motors feature an open air base to allow for more efficient cooling of the motors. Weighing in at just 30.5 grams helps eliminate some weight compared to other motors and fits with most racers desire to shave precious grams off builds wherever they can.We use high quality aluminum and rare-earth magnetic materials, and redesigned the magnetic circuit of Dragonfly Hurricane to make sure the motors come with a better loading capacity.Featuring 20awg silicone wire, N52SH magnets and Japanese NSK bearings these motors are sure to fit the needs of most FPV racers.The Draongfly Hurricane has added an insulation film between bottom cover and spindle to isolate the connection between screws and copper wires. In this way, the motor is able to prevent from short circuit and leakage that caused by misoperation.

    $13.99-$54.99

    SKU:DG0725

    Weight: 0.10 kg

  • Dragonfly 48CH Battle Diversity Receiver w/ Built-in Monitor

    Dragonfly 48CH Battle Diversity ReceiverWe are listening to our customers. This is a follow-up version of another CNC shell Dragonfly diversity receiver. Considering the aluminum CNC machined shell version is not competitive in price, we made this new one that keeps almost the same features, while much lower in cost. 48 channels with raceband, built-in monitor, DVR, color-coded channels and many more. Is this the diversity receiver you are looking for? Plug and play. The two built-in two receivers have a high sensitivity of -95dbm which is much higher than that of other receivers. You can automatically receive the best signal and maximize your signal coverage. Built-in 1.54" monitor for instant display, showing the input voltage, frequency band and channel on the screen. You are also easy to observe the channel interference. Futhermore, we are using the monitor with top quality mineral glass which are widely used on the watches to make sure the monitor will not be scratched.The Dragonfly Diversity Receiver is with dual video outputs, easy connect it to various devices. It has a function of DVR files protection that automatically save the footage even suddenly power off.Easy to use button with channel autoscan. Channel searching comes with memory function, no need to search every time.Specifications: Receive Frequency: ISM 5.3GHz-5.95GHz 48 CHWorking Voltage: +7.0V~+26.0V, USB 5.0VCurrent: <350mA/12V DCVideo output: 1V±0.2Vp-p/75ΩAudio output:0.5 ~ 2.0Vp-p/10KΩOutput: RF1, RF2TV Standard: PAL/NTSC/SECAM (Automatic)Wireless receiver sensitivity:<-95dBmAntenna connector: SMAFeatures:Supports 6 bands 48 channels with raceband.7-26v wide input, can be powered by USB as well.DVR files protection. Automatically save the footage even suddenly power off.Dual video outputs, easy connect to various devices.Built-in 1.54" monitor for instant display.Channel setting with different LED colors and the modes are seletable to show your own personablity.Channel searching comes with memory function, no need to search every time.The receiver sensitivity is -95dbm, higher than that of other receiver.Firmware upgradable.48 Channels with Race BandFirmware Upgrade:1.Plug in the USB cable to your computer. (Do not turn on your receiver)2.Press the REC/PLAY button then turn on the the receiver. You will see a USB drive around 100KB-8MB. Put the upgrade firmware (SJRC806-ENC.bin) to the USB root then power off. It will upgrade when you power on next time.Built-in 1.54" monitor for instant display, showing the input voltage, frequency band and channel on the screen. You are also easy to observe the channel interference. Futhermore, we are using the monitor with top quality mineral glass which are widely used on the watches to make sure the monitor will not be scratched.The LED color changed with the change of channels. You can set the colors you like by yourself to show your own personablity.Dual video outputs, easy connect to various devices.Necessary cables and accessories included. Please take a note that the antennas are not included. 

    $99.98 $71.99, Save 28% OFF

    SKU:D48DREV

    Weight: 0.50 kg

  • Dragonfly 48CH Diversity Receiver w/ Built-in Monitor

    Dragonfly Diversity ReceiverAluminum CNC machined shell, 48 channels with raceband, built-in monitor, DVR, color-coded channels, tripod mount and many more. Is this the diversity receiver you are looking for? We have been going over the design of the Dragonfly Diversity Receiver for several months now and have finally settled on the final production version.Plug and play. The two built-in two receivers have a high sensitivity of -95dbm which is much higher than that of other receivers. You can automatically receive the best signal and maximize your signal coverage. Built-in 1.54" monitor for instant display, showing the input voltage, frequency band and channel on the screen. You are also easy to observe the channel interference. Futhermore, we are using the monitor with top quality mineral glass which are widely used on the watches to make sure the monitor will not be scratched.The Dragonfly Diversity Receiver is with dual video outputs, easy connect it to various devices. It has a function of DVR files protection that automatically save the footage even suddenly power off.Easy to use button with channel autoscan. Channel searching comes with memory function, no need to search every time.To ensure the longest and best performance, the Dragonfly Diversity Receiver comes with two built-in micro mute fans, no noise and able to make the receiver stay cool. As per our internal test, the Dragonfly diversity receiver works great even after a long time exposure to the sun during a hot day.Features:1. Aluminum CNC Machined Shell.2. Built-in micro fans, able to work under hot weather.3. Supports 6 bands 48 channels with raceband.4. 7-26v wide input, can be powered by USB as well.5. DVR files protection. Automatically save the footage even suddenly power off.6. Dual video outputs, easy connect to various devices.7. Built-in 1.54" monitor for instant display.8. Channel setting with different LED colors and the modes are seletable to show your own personablity.9. Channel searching comes with memory function, no need to search every time.10. The receiver sensitivity is -95dbm, higher than that of other receiver.11. Firmware upgradable.48 Channels with Race BandHow to use Dragonfly Diversity ReceiverShort press "Band" for changing band.Short press "Power" for changing channel.Short press "DVR" for DVR shooting.Short press "Manual" for OSD.Long press "Power" to turn on or turn off.Long press "DVR" to enter replay mode, then press "Band" to move upward and press "Power" to move downward, short press "DVR" to play, long press to delete, short press to confirm deletion, and press "manual" to exit. During playing, the user can press the button of moving upward or downward to fast forward or rewind the video.Long press "Manual" to enter manual setting, then press "Band" to move upward and press "Power" to move downward, press "DVR" to enter. Upward and downward to set the parameters, press "DVR" to confirm and short press "Manual" to exit.Built-in two micro fans, able to keep cool under extremely hot weather. As per our test, the Dragonfly diversity receiver works great even after a long time exposure to the sun.

    $169.99 $139.39, Save 18% OFF

    SKU:DFDDR

    Weight: 0.50 kg

  • Dragonfly MC1105 Micro Class Racing Motor 7500kv

    X-Racer KL-EX90 LOS Maiden Flight : Insane 2inch Power! By the RCAddictThese are the new Dragonfly MC1105 7500kv brushless motors for micro class racing quads. They have been proven powerful and reliable at race track, while our team pilot Ka Kei Leung flew the 2" KL-EX90 with these micro motors to compete with 4s 5" bigger racing quads. Click to watch the video. Recommend to use Gemfan 2-3" propellers and 12A ESCs.Dragonfly MC1105 Mini Motor Specifications:KV: 7500KVNo.of Cells(Lipo)): 2S-3SStator Diameter: 11mmStator Length: 5mmShaft Diameter: 1.5mmMotor Dimensions(Dia.*Len): Φ14.2×14.45mmWeight (g): 6gRecommended propellers: Gemfan 2-3″, Gemfan 2035BNRecommended ESC: 12A

    $9.99-$38.99

    SKU:KL90MT

    Weight: 0.10 kg

  • Dragonfly Low Profile Micro FPV Camera

    This is the micro FPV camera that we are using on the hot selling X-Racer X-1. Using this high quality micro FPV camera, we have saved some much needed space for this design and we are able to place the camera in a low profile position between the two forward motors allowing for a design that does not require the video system being mounted in a high profile top mount of the aircraft.Specifications:CCD 1/4 CmosSignal System PAL NTSCPixel P:720H×576 N:720×487Photosensitive area 1/4:4.077mm x 3.136mm Scanning frequency H:15.625KHz V:50Hz H:15.7343KHz V:60HzHorizontal clarity 800 TV LinesShutter Speed 1/50-1/100000(秒) 1/60-1/100000(秒)Min. Illumination 0.1 Lux / F1.2S/N radio ≥48dB(AGC OFF)Grayscale 10Gamma value 0.45Black level 0.06 Vp-pVideo output 1.0Vp-p 75ΩPower Requirement DC3.3-5VWorking Temperature -20℃~50℃ RH95% MaxPower Consumption 90MAWeight: 2g

    $14.99 $7.50, Save 50% OFF

    SKU:FXRMC

    Weight: 0.10 kg

  • Dragonfly 25mw 48CH Micro VTX For X-Racer X-1 and KL-EX90

    FPVModel did not stop at the flight controller design. We have also designed a Drgonfly 25mw 48ch Vtx to mount flushly on top of the FC and give and even more aero dynamic low profile design for the video transmission. By using this low profile design were able to streamline the body of the X-Racer X-1 and allow for smooth airflow over the low slung canopy, allowing for smooth airflow over the top of the frame.

    $15.99

    SKU:GFVX1

    Weight: 0.10 kg

  • Dragonfly 5.8G 48CH 25/200/600mw Stackable Video Transmitter

    The new Dragonfly 5.8g stackable VTX comes with 48 channels, 9-26v input and switchable between 25/200/600mw. The stackable design makes you easy to place this VTX above your flight controller. With 48 channels, no need to worry about the interference while powered on any more.Main Features:Stackable Design, easy to place above flight controller.9-26V input, suitable for multirotors of various sizes for indoor and outdoor flight.Switchable between 25/200/600mw, convenient for adapting the flying environment.Comes with 48 channels, including the Raceband.Two ways of connection: Directly plug-in or soldering.SMA and RP-SMA connectors are selectable.Heat sink design to avoid over-heated.Extension cable is selectable. (Need to purchase seperately, Clike Here to Buy)Specifications:Operating Voltage: DC 9-26VSupply Current:270MAOperating Temperature:-20℃~80℃Audio Carier Frequency:6.5MHzVideo Input Impedance:75ΩWeight:10 gramsAntenna Connector:SMA / RPSMAVideo Format:PAL / NTSCOutput Power:13~28dbmChannels:48CHFrequency Range:5362~5945MHzPort Connector:2.0 socket, 5 pinSize:35x35mmUser Manual: ?Outer Diagram:Frequency Table:

    $37.98 $18.99, Save 50% OFF

    SKU:GFVTX

    Weight: 0.10 kg

  • Dragonfly Transmitting SMA Female Antenna Extension Cables

    Dragonfly Transmitting SMA Female Antenna Extension Cables. A simple extension cable for better placement of your antenna.Specifications:- Connector: SMA Female- Cable Length: 45mm (cable only)

    $2.39 $0.72, Save 70% OFF

    SKU:DFTE

    Weight: 0.10 kg

  • Dragonfly 7x16mm 14000KV Coreless Motor for X-Racer X-1

    These are powerful 7mm motors that works great in X-Racer X-1 like micro racers. These motors come with plug and 8cm wire, they are better suited to FPV and will be the perfect upgrade for your Tiny conversion. If you are looking for punch and durability, you found it. Description:Motor Diameter: 7mmMotor Length: 16.5mmShaft Diameter: 0.08mmCable Length: 80mmWeight: about 3.2gOption: CW Motor(With Red Black wire), CCW Motor(With Black White wire)Quantity: 1pc / 4pcs(2CW+2CCW) optional

    $3.29 $1.71, Save 48% OFF

    SKU:DFCM

    Weight: 0.10 kg

  • Dragonfly Booster 5.8G 3dBi TX/RX FPV Antenna RP-SMA/SMA

    Dragonfly Booster Durability TestBetter signal quality and much more durable. These Dragonfly Booster antennas can be survived from the hardest crashes with the specially designed cover and silver connector. Three different sizes?(5cm, 8cm and 11cm) in SMA and RP-SMA are selectable to meet your special needs for the build.Specification:Frequency Range: 5400 ~ 5900MhzImpedance: 50ΩV.S.W.R: ≦1.5Gain: 3 ~ 3.5dBiFirst Upper Sidelobe Suppression (dB) ≥15Front to Rear Ratio (dB) ≥25Cross-polarization Discrimination (dB) ≥15Port Isolation (dB) ≥28Polarization: Vertical/HorizontalMaximum Input Power: 10WCable: RG141Color: BlackConnector: RP-SMA / SMA (Optional)Length: 5cm / 8cm / 11cm (Optional)Weight: 10g / 11g / 13g Package Included:?1 x Antenna* 5.8G Vertical Polarization* 5.8G Horizontal Polarization

    $15.98 $7.99, Save 50% OFF

    SKU:FBSA

    Weight: 0.10 kg

  • New Dragonfly MC2206 2800KV Brushless Motor

    These are updated version of Dragonfly MC2206 2800KV motors that released in June 2016. They are powerful, reliable, and quick, specially designed for FPV racing mini quads that need punchy motors and the higher KV to spin those 4045 props that bit faster. The higher KV and electrical ratings allow these motors to deliver more thrust compared to other existing motors on 4 inch propellers.The new Dragonfly MC2206 2800KV motor does not come with the prop adapter, but comes with a locknut. Not only save the weight for better racing performance, but also more reliable and easier to use. This version is without the c-clip, but with a locked design at the bottom, no need to worry about the motor will drop out during racing.    Weight: 32gInternal Resistance: 0.013ΩKV Rating: 2800KVAll Dragonfly motors come with a Satisfaction Guarantee. If for any reason you are not COMPLETELY 100% SATISFIED, you can return the motors for a full refund within 30 days upon receiving them.

    $15.99 $10.39, Save 35% OFF

    SKU:MC2206-28KV

    Weight: 0.10 kg

  • Dragonfly 5.8G Receiver Module for Fatshark Dominator FPV Goggles

    Higher sensitivity and much more durable. Perfect for those who want to upgrade to race band.The Dragonfly 5.8G receiver module is made for the Fatshark Dominator line of goggles. The RX has been manufatured in white to match the white headset for the flyers that dont use the plastic snap cover but can also be used with the cover in place. This reciever has a built in LED to make it easier to know what channel you are on and make the channel selection process much smoother. No fooling around counting flashing lights with buttons that are too small and hard to press. Long press the button to band and use the fatshark channel buttons to cycle the channel.Quick Intructions:Place the module into your Fatshark Dominator receiver. Long press for Band, Cycle goggle channel switch for channels. The receiver will display the currently active band with the LED.- 1 flash = BOSCAM Band A- 2 flashes = BOSCAM Band B- 3 flashes = BOSCAM Band E- 4 flashes = Airwave- 5 flashes = Race bandSpecifications:1. 40 channels (5 Bands with 8 channels each)2. -90dBm sensitivity3. Works with all BOSCAM A/V transmitters (200mW, 400mW, 500mW)4. Works with Airwave transmitters (tested with the new ImmersionRC 600mW). Airwave frequency support is not full spec. Range is affected, as well as transmission picture quality! We highly recommend the use of BOSCAM transmitters.5. 3 - 5V operating voltage6. SMA antenna connector7. Fatshark Dominator compatible, toggles channels using the Fatshark button!8. Can be installed into Fatshark Attitude goggles!Supported Frequencies:

    $28.99 $14.50, Save 50% OFF

    SKU:RFFSG

    Weight: 0.10 kg

  • Dragonfly 5.8G 40CH Mini TX 25mw/200mw

    Introducing the new ultra light weight Dragonfly 5.8G mini video transmitter. Featuring the full range of 40 channels to ensure you can transmit on the frequency that is most convenient to you. This transmitter features a smart design with push button band & channel navigation, along side the edge of the transmitter is a power switch enabling the user to turn the tx off and on at will. This is especially helpful when connecting to the computer or powering the aircraft without the antenna on. Press once quickly to change channels, hold down with a slight pause to enter band mode and cycle through the full range of bands. Dont worry about fumbling with dip switches and channel diagrams with this smart push button design.We have 25mw and 200mw sending power for your choice. Price for single TX only.Frequency and Channel Frequency Table

    $21.99 $11.00, Save 50% OFF

    SKU:D58MTX

    Weight: 0.10 kg

  • Dragonfly Bulletproof Bullnose 4045 Propellers 4 pcs

    Dragonfly Bulletproof Bullnose 4045 Propellers are specially designed for mini multirotors, like ZMR180. They are composite props with a slight change in mixture, offer extra strength when compared to other propellers.  Color: Black / Green (optional)Size: 4*4.5Weight:3.5g/pc  ( update the weight on Octorber 13th)Quantity: 4 pcs (4pcs are the same rotation direction, CW/CCW optional)

    $3.65 $1.90, Save 48% OFF

    SKU:4DF4045P

    Weight: 0.10 kg

  • Dragonfly MC1306 3100KV Mini Motor CW/CCW

    These are the all new Dragonfly MC1306 KV3100 motors for small 180~220mm multirotors and 4~5 inch props, like RTS200. These motors are powerful, reliable,  and quick! DescriptionName: Dragonfly MC1306 3100KV Mini MotorKV: 3100Configuration: NPStator Diameter: 18mmStator Length: 14.1mmShaft Diameter: M5Motor Dimensions(Dia.*Len): Φ18×15.1mmWeight (g): 12gNo.of Cells(Lipo): 2-3SMax Continuous current(A): 7.9AMax Continuous Power(W): 58.5WAll Dragonfly motors come with a Satisfaction Guarantee, if for any reason you are not COMPLETELY 100% SATISFIED you can return the motors for a full refund within 30 days upon receiving them.  

    $10.99 $3.52, Save 68% OFF

    SKU:DF1306-3C

    Weight: 0.10 kg

  • Prop Adapter for Dragonfly 1806 Motor CW/CCW

    Prop adapter for Dragonfly 1806 motor,A replacement for the 1806 motor,if yours lost or broken,you can buy it from here.CW or CCW thread,choose which you need.Note:This prop adapter also compatible with FPVMODEL 1806 2300KV motor or Dragonfly and FPVMODEL 2204/2206 motors.

    $3.00 $0.84, Save 72% OFF

    SKU:MPA

    Weight: 0.05 kg

  • Dragonfly 5045 Bulletproof Props Composite Propellers 4 Pieces

    GemFan killers: DragonFly Bulletproof propellers for Mini QuadsDragonfly 5045 Bulletproof Propellers?are?composite props with a slight change in mixture. They offer extra strength when compared to other propellers. ?(See above video for the comparison with Gemfan props)Price for 4 PiecesFeatures:?Low cost, high durability and strength.?Specifications:Type: 5045Colors: Red / White (Optional)Material: Nylonweight: 1.5g/1 pcQuantity: 4 pcs

    $3.95 $0.79, Save 80% OFF

    SKU:4-DP5045PRC

    Weight: 0.10 kg

  • DragonFly 5030 Bulletproof Props Composite Propellers 4 Pieces

    GemFan killers: DragonFly Bulletproof propellers for Mini QuadsDragonfly 5030 Bulletproof Propellers?are?composite props with a slight change in mixture. They offer extra strength when compared to other propellers. ?(See above video for the comparison with Gemfan props)Price for 4 PiecesFeatures:?Low cost, high durability and strength. ?Specifications:Type: 5030colors: Red / White (Optional)Material: Nylonweight: 1.5g/1 pcQuantity: 4 pcs

    $3.95 $0.79, Save 80% OFF

    SKU:4-DP5030PRC

    Weight: 0.10 kg

  • DragonFly 6045 6x4.5 Bulletproof Props Composite Propellers 4 Pieces

    GemFan killers: DragonFly Bulletproof propellers for Mini QuadsDragonfly 6045 Bulletproof Propellers?are?composite props with a slight change in mixture. They offer extra strength when compared to other propellers. ?(See above video for the comparison with Gemfan props)Price for 4 Pieces.Features:?Low cost, high durability and strength.?Specifications:Type: 6045colors: Red / White (Optional)Material: Nylonweight: 2g/1 pcQuantity: 4 pcs

    $4.65 $0.93, Save 80% OFF

    SKU:4-DP6045PRC

    Weight: 0.10 kg

  • Dragonfly MC1806 2300KV Mini Motor CW/CCW

    These are the all new Dragonfly MC1806 KV2300 motors for mini copters and mini racing setups. These motors are powerful, reliable,  and quick! You can follow a thread on RCGroups where we asked reviewers to try these motors and let us know what the thought,  check it out here. Please watch the videos of a few of the independent reviewers below. Dragonfly motors come with a Satisfaction Guarantee, if for any reason you are not COMPLETELY 100% SATISFIED you can return the motors for a full refund within 30 days upon receiving them. Dragonfly MC1806 2300KV Mini Motor,specially designed for mini multi-rotors. High quality meets affordability.

    $19.95 $3.99, Save 80% OFF

    SKU:DFMC1806

    Weight: 0.10 kg

Find us on Google+ Watch us on Youtube Like us on Twitter Follow us on Facebook

Home   |   About Us   |   New Products   |   Multi-Rotors   |   FPV Airplanes   |   FPV Equipment   |   Battery / Chargers   |   Tools & Accessories   |   Contact Us   |   Blog   |  Site Map

Product Tags: ABCDEFGHIJKLMNOPQRSTUVWXYZ0-9

Copyright © 2015 FPVMODEL.COM®. All Rights Reserved.