Sorted:
  • 6x15mm Coreless Motor for Blade Inductrix and Blade Nano QX (Speed: Fast)

    These are powerful motors that works great in the Blade Inductrix, Blade Nano QX, Blade CPX/S. These motors come with plug and 6cm wire, they are better suited to FPV and will be the perfect upgrade for your Tiny conversion. If you are looking for punch and durability, you found it. Warning: These motors are too power hungry for the stock packs! You need strong batteries to run these motors at full performance. Suggest use 205mah mylipo pack, and they will deliver a lot of punch and maximum runtime.Warning: Applies only to the original Nano QX, without FPV. These motors will turn your Nano QX into an insane jaw-dropping pocket rocket, but it will not like hovering! Depending on the battery you use, you will see varying degrees of oscillations (wobble) during hover and slow flight in SAFE mode. Agility mode does not have this problem.Specifications:Speed: 14.000KvOperating voltage: 1.5-3.7VMax. thrust: 15g (direct drive)1.0A load current at 3.7V (direct drive)Lifetime rating: 5-6 hoursPlug: Micro-JST-1.25Clockwise: red +, blue -Counter clockwise: white +, black -Warning: To maximize performance and life span, please do not run them in reverse! Wire colors are reversed.Dimensions:Motor diameter: 6mmMotor length: 15mmShaft Diameter: 0.8mmShaft Length: 4mmWeight: 1.8g Wire length: 60mmPlease note: wire color coding is reversed from the stock motors. Blade has decided to code their motors differently to everyone else in the industry. If you take off, and your Inductrix or Nano QX spins in circles and yaws like a micro frisbee on steriods, please note wire colors are reversed. Your motors are installed in the wrong spots.

    Review: Write a Review

    $2.19

    SKU:CL14M

    Weight: 0.10 kg

  • DYS SE2205 PRO 2300KV Motor Race Edition with PCB for FPV Racer CW/CCW

    Features:*New design with imported NMB bearing*N52 magnet and 0.2mm lamination*Powerful with 1.1kg thrust to work with BN5045 Prop*Hollow shaft with screw to fix the shaft*Special design for the FPV racer champions.Specifications:KV..............................................................................................................2300Configu ration....................................................................................NPStator Diameter....................................................................................22.0mmStator Length..........................................................................................5.0mmShaft Diameter.......................................................................................3.0mmMotor Dimensions(Dia.*Len)...............................................Φ27.7×19.0mmWeight (g)...................................................................................................30gNo.of Cells(Lipo).....................................................................................3-5SMax Continuous current(A)............................................................26.8AMax Continuous Power(W)...........................................................428.8WInternal resistance..............................................................................0.06Ω

    Review: Write a Review

    $17.99 $14.75, Save 18% OFF

    SKU:DY2205P

    Weight: 0.10 kg

  • New Dragonfly MC2206 2800KV Brushless Motor

    These are updated version of Dragonfly MC2206 2800KV motors that released in June 2016. They are powerful, reliable, and quick, specially designed for FPV racing mini quads that need punchy motors and the higher KV to spin those 4045 props that bit faster. The higher KV and electrical ratings allow these motors to deliver more thrust compared to other existing motors on 4 inch propellers.The new Dragonfly MC2206 2800KV motor does not come with the prop adapter, but comes with a locknut. Not only save the weight for better racing performance, but also more reliable and easier to use. This version is without the c-clip, but with a locked design at the bottom, no need to worry about the motor will drop out during racing.    Weight: 32gInternal Resistance: 0.013ΩKV Rating: 2800KVAll Dragonfly motors come with a Satisfaction Guarantee. If for any reason you are not COMPLETELY 100% SATISFIED, you can return the motors for a full refund within 30 days upon receiving them.

    Review: Write a Review

    $15.99 $10.39, Save 35% OFF

    SKU:MC2206-28KV

    Weight: 0.10 kg

  • ZMR250 4mm Carbon Fiber Arms for 1806 motor 2pc

      For the spare PDB for ZMR250 V2, buy it CLICK HERE >>> Known as the ZMR250, C250, QAV250, H250, Blackout Clone or the Mystery 250, whatever the real name is, ZMR250 carbon fiber frame is probally one of the most popular mini quad frames in this hobby. It is widely available, affordable and strong. However, the majority complaints come from the broken arms in crashes.Now here comes the replacement 4mm arms for ZMR250 mini quad frame, it will make you worry free with the flying of this carbon fiber mini quad frame. The arms are also suitable for your mini quad DIY. Price is for two arms, so buy as many as you need.Specifications:Thickness: 4mmLength: 115mm / 116mmQuantity: 2 pcs/kitSuitable for both ZMR250 and ZMR250 V2

    Review: Write a Review

    $6.90 $3.45, Save 50% OFF

    SKU:2MAP

    Weight: 0.10 kg

  • DYS SE2205 2300KV 3-5S Brushless Motor for Multicopters

    Specifications:KV..............................................................................................................2300Configu ration....................................................................................NPStator Diameter....................................................................................22.0mmStator Length..........................................................................................5.0mmShaft Diameter.......................................................................................3.0mmMotor Dimensions(Dia.*Len)...............................................Φ27.7×19.0mmWeight (g)...................................................................................................30gNo.of Cells(Lipo).....................................................................................3-5SMax Continuous current(A)............................................................26.8AMax Continuous Power(W)...........................................................428.8WInternal resistance..............................................................................0.06Ω

    Review: Write a Review

    $17.99 $11.69, Save 35% OFF

    SKU:SE2205

    Weight: 0.10 kg

  • Emax MT2206 1900KV Brushless Motor for FPV Racing Quad CCW

    The emax MT2206 1900KV brushless motor is specially designed for 200-300 sizes multirotors, which weighs only 32g. It offers great performance at affordable price. Each motor is carefully balanced and tested before shipped out from factory. Using Japanese NMB ball bearing, Japanese Kawasaki stator, Ndfeb with strong magnetic and high temperature resistance, decreasing heat generation during operation, increasing efficieny.Features:1. Low CG design, ligth weight design, longer flight duration 2. Factory has made dynamic balance test for each motor3. Integreated processing between prop mount holder and motor cap4. Adopts Japan NMB bearing, with low noise and longer lifetime5. Adopts Japanese Kawasaki stator, with high efficiency and low heat6. CW and CCW propeller adapters, holding propellers tightly. 7. 100% balanced, decreasing vibration to the minimum.Specification:Structure: 12N14PKV: 1900KVLength: 34.2mmRotor outer diameter: 27.9mmShaft diameter: 3mmLipo battery: 2-3SMax. pull: 460gProp suggest: 6-8 inchWeight: 32gPackage size: 108*68*31mmNote: The EMAX RS2205 - CW thread/CCW rotation, CCW thread/CW rotation.

    Review: Write a Review

    $17.99 $10.07, Save 44% OFF

    SKU:MT2206

    Weight: 0.10 kg

  • EMAX RS2205 2300KV Motor for FPV Racing Quad CW/CCW

    Note: The EMAX RS2205 - CW thread/CCW rotation, CCW thread/CW rotation.Have you guys seen the latest EMAX RS2205 Racing Edition motors? Excited? If you are, order them! The new RS2205 KV2300 motors from Emax are specially designed for racing quadcopters. They are some of the best racing motors that we have ever seen. The motors use high strength N52 Neodyum magnets, and have active cooling fins that greatly reduce motor temperatures. Besides, the very light weight designs and high quality Japanese bearings make them the best possible performance.The motor bell and shaft is held down by an enhanced U ring for safety and stability to ensure it doesnt come off. It has dual lock CW and CCW lock nuts. Geared for 3S to 4S use, these motors run M5 shafts, spin at 2300KV, and has a maximum thrust of 1024grams! Using 5x45 inch props will be best on this application, and each motor weighs about 30g.Each motor comes individually, so if you want a full set for your quad, you will need two of the CW ones, and two CCW versions.Features:Race Spec PerformancesHigh Strength N52 Neodyum MagnetsActive Cooling Fins Greatly Reduce Motor TemeraturesLow CG, Light Weight DesignJapanese Bearing For PerformancesEnchance Anti Off U Ring For Safety & StablilityDual Lock CW / CCW LocknutsSpecifications:Framework:12N14PNo. of Cells 3 - 4SLength:31.7mmShaft: M5KV: 2300Max Thrust: 1024gDiameter:27.9mmPropeller Suggested: HQ 5045 BNWeight: 30g

    Review: Write a Review

    $19.99 $14.79, Save 26% OFF

    SKU:RS2205

    Weight: 0.10 kg

  • MC1806 2300KV Titanium Brushless Motor

    The MC1806 2300kv  multirotor motor is ideal for small to medium sized multirotors, including ZMR180 and ZMR250 V2. It comes with all necessary components to get you up and running.Please note that this motor is directly sourced from the factory that without any logo, but quality guaranteed.  Factory Specifications:KV: 2300Configuration: 12N14PStator Diameter: 18mmStator Length: 6mmMotor Dimensions (Dia.*Len): Φ23×15.5mmWeight: 20gInternal Resistance:53mΩTechnical Data:

    Review: Write a Review

    $8.99 $6.92, Save 23% OFF

    SKU:MC1806W

    Weight: 0.20 kg

  • T-Motor MN1806 KV2300 Power Combo

    T-motor MN1806 2300KV Motors are perfect for those who want uncompromising quality, T-Motors are renowned throughout the hobby as being the pinnacle of perfection. These are the ideal motors for most 250 size quadcopters. The regular selling price is $170.55 USD, now for a discounted price, the combos are just sold at $148.69 USD ea., $21.86 USD saved.Update on September 8th,  2016: Due to the SN20A ESC out of stock, we have changed the ESC to XS20A. The same price and same performance. Please make sure you understand and accept this before purchasing, thank you!Package including:T-MOTOR MN1806 KV2300 Brushless Motor  x 4DYS XS20A Mini ESC x 4 Dragonfly Bulletproof 5045 Props x16 pcsFPV1.2G 5.8G Micro BEC 5V x1

    Review: Write a Review

    $148.69 $130.85, Save 12% OFF

    SKU:TM1806PC

    Weight: 0.60 kg

  • Octocopters Power Combo with T-Motor Antigravity 4004 KV400

    NOTE: These two combos  contain different ESCs.Package including:T-Motor Antigravity 4004 KV400  x4T-MOTOR AIR 40A ESC  x81448 14X4.8 Carbon Fiber Propeller  x5pairsFPV1.2G 5.8G Micro BEC 5V x1Package including:T-Motor Antigravity 4004 KV400  x4HobbyWing FlyFun 40A ESC  x81448 14X4.8 Carbon Fiber Propeller  x5pairsFPV1.2G 5.8G Micro BEC 5V x1

    Review: Write a Review

    $903.69 $650.66, Save 28% OFF

    SKU:TM4004PCO

    Weight: 0.90 kg

  • Hexacopters Power Combo with T-Motor Antigravity 4004 KV400

    NOTE: These two combos  contain different ESCs.Package including:T-Motor Antigravity 4004 KV400  x3T-MOTOR AIR 40A ESC  x61448 14X4.8 Carbon Fiber Propeller  x4pairsFPV1.2G 5.8G Micro BEC 5V x1Package including:T-Motor Antigravity 4004 KV400  x3HobbyWing FlyFun 40A ESC  x61448 14X4.8 Carbon Fiber Propeller  x4pairsFPV1.2G 5.8G Micro BEC 5V x1

    Review: Write a Review

    $677.69 $487.94, Save 28% OFF

    SKU:TM4004PCH

    Weight: 0.80 kg

  • Quadcopters Power Combo with T-Motor Antigravity 4004 KV400

    NOTE: These two combos  contain different ESCs.Package including:T-Motor Antigravity 4004 KV400  x2T-MOTOR AIR 40A ESC  x41448 14X4.8 Carbon Fiber Propeller  x3pairsFPV1.2G 5.8G Micro BEC 5V x1Package including:T-Motor Antigravity 4004 KV400  x2HobbyWing FlyFun 40A ESC  x41448 14X4.8 Carbon Fiber Propeller  x3pairsFPV1.2G 5.8G Micro BEC 5V x1

    Review: Write a Review

    $451.39 $325.00, Save 28% OFF

    SKU:TM4004PCQ

    Weight: 0.80 kg




Find us on Google+ Watch us on Youtube Like us on Twitter Follow us on Facebook

Home   |   New Products   |   Multi-Rotors   |   FPV Airplanes   |   FPV Equipment   |   Battery / Chargers   |   Tools & Accessories   |  Site Map

Product Tags: ABCDEFGHIJKLMNOPQRSTUVWXYZ0-9

Copyright © 2015 FPVMODEL.COM®. All Rights Reserved.