Sorted:
  • Matek PDB-XPW W/ Current Sensor 140A & Dual BEC

    Something new from Matek Systems.The PDB-XPW from Matek Systems distributes power from a Lipo pack to 4 ESCs, as well as providing synchronised & regulated DC 5V outputs & linear regulated DC 12V for powering cameras, RC receivers, flight contollers, video transmitters and LEDs etc. The Matek PDB-XPW also has a built-in 140A current module, offers a XT60PW socket to connnect the LiPo pack conveniently.Features:2 oz copper, 4 layers & 2mm PCB.Built-in current sensor 140ABuilt-in XT60PW socket.Total 4 pairs ESC solder tabs are fit for X-Type frames.5V & 12V output LED indicators & short circuit totelrant.Specification:  General:Input voltage range (3S-5S LiPo operation): 9 - 21V DCPDB: 4 x 35ARegulated 5V and 12V outputsCurrent module 150ALED power indicators ( 5V & 12V outputs ) Current Module150A3.3V ADC BEC 5V output:Designed for RC Receivers, Flight controllers, OSD, and  Servos.DC/DC synchronous buck regulator.Voltage: 5.0 +/- 0.1VDCContinuous current: 2 Amps (Max.2.5A  10s/minute)Output Ripple: 40mV (VIn=16V,  VOut=5V@2A load)Short-circuit tolerant (5  seconds/minute) BEC 12V output:Designed for Video TX or FPV camera with linear regulator.The battery should be 4~5S LiPo (13~21V DC)Voltage: 12.0 +/- 0.3VDCContinuous current: 500mA (Max.0.8A  5s/minute)Short-circuit tolerant (2  seconds/minute) BEC 12V @ 3S LiPoOutput voltage= 3S LiPo voltage -1V Physical:Mounting: 30.5 x 30.5mm, Φ3mmDimensions: 36 x 50 x 4 mm (w/o XT60PW), 36 x 58 X10.5mm (w/  XT60PW)Weight: 7.0g(w/o XT60PW), 11g(w/  XT60PW)User Manual: 

    Review: Write a Review

    $5.98

    SKU:PDB-XPW

    Weight: 0.10 kg

  • Matek HUBOSD Eco X-Type w/ STOSD8 Dual BEC Current Sensor and XT60

    HUBOSD8 has been engineered to provide the highest possible performance and reliability in a 46*36mm & 4 layers PCB. It is a multifunctional HUB with PDB, BEC 5V/2A &12V/500mA, Current sensor 140A, STOSD8. It is specially made for the mini FPV Quad. The BEC 12V is linear regulator, no LC Filter needed. Built-in STOSD8 can support Plug & Play, no complicated settings needed.Specifications:Input: 8~ 21V (3-5S LiPo)PDB: 4x30A (Max.4x35A)Regulated 5V and 12V outputsCurrent Sensor 140ABuilt-in STOSD8

    Review: Write a Review

    $16.99 $14.61, Save 14% OFF

    SKU:HUBOSD8-X

    Weight: 0.10 kg

  • Matek HUBOSD Eco H-Type w/ STOSD8 Dual BEC Current sensor 140A OSD

    HUBOSD8 has been engineered to provide the highest possible performance and reliability in a 46*36mm & 4 layers PCB. It is a multifunctional HUB with PDB, BEC 5V/2A &12V/500mA, Current sensor 140A, STOSD8. It is specially made for the mini FPV Quad. The BEC 12V is linear regulator, no LC Filter needed. Built-in STOSD8 can support Plug & Play, no complicated settings needed.Download Manual hereDownload STOSD Tool Software hereSpecifications:Input: 8~ 21V (3-5S LiPo)PDB: 4x30A (Max.4x35A)Regulated 5V and 12V outputsCurrent Sensor 140ABuilt-in STOSD8Physical:- 2oz copper, 4-layers &1.6mm PCB.- 1x Battery input, 4x ESC outputs. 2x BEC 5V outputs, 2x BEC 12V outputs.- Camera signal & Gnd pads, Video Transmitter Signal & Gnd pads- 1x Serial port (RX, TX, G)- Dimensions: 46x36x4mm, Weight: 8.5g- Mounting holes 30.5mm square spacing,Φ3mmPDB (ESC outputs)Continuous current: 30A per output Peak current (10 seconds/minute): 35A per outputBEC 5V outputsDesigned for RC Receivers, Flight controllers, OSD, and Servos.DC/DC synchronous buck regulator.Voltage: 5.0 +/- 0.1VDCContinuous current: 2 Amps (Max.2.5A 10s/minute)Output Ripple: 40mV (VIn=16V, VOut=5V@2A load)Short-circuit tolerant (5 seconds/minute)BEC 12V outputsLinear regulator, very low noise. LC Filter is needless.Designed for Video TX or FPV camera.Voltage: 12.0 +/- 0.3VDC (4~5S operation)Continuous current: 500mA@16V IN, 400mA@20V INShort-circuit tolerant (2 seconds/minute)If the battery is 3S LiPo, Output voltage=3S LiPo voltage - 1V

    Review: Write a Review

    $16.99 $14.61, Save 14% OFF

    SKU:HUBOSD8-H

    Weight: 0.10 kg

  • $8.99 $3.96, Save 56% OFF

    SKU:PDB-XT60

    Weight: 0.10 kg

  • $5.99 $4.61, Save 23% OFF

    SKU:MPDB5V12V

    Weight: 0.10 kg

  • Matek PDB BEC-5V/3A LED Lighting Control Tracker Low Voltage Alarm LED & POWER HUB 5 in 1 V3.0

    The 5in1V3 has been engineered to provide the highest possible performance and reliability in a 46*36mm & 4 layers PCB. It is a 5in1 HUB with Power Distribution Board, BEC 5V/3A &12V/500mA, LED Light Controller, Lost Plane Finder & Low Voltage Alarm functions.It is specially made for the Multi-Rotors, mini FPV Quad. Built-in 5V BEC can be connected to receiver or flight controller with Aux pins directly. simplify wiring. The BEC 12V can be used to power the Camera, Video Transmitters,ect. Inbuilt 5V LED light controller, three flash modes can be choosed with the toggle switch of transmiter. And the buzzer can also be triggered with the toggle switch, which can help you find the models in tall grass or trees. the 5in1 also acts as a battery voltage monitor. Once voltage gets below the threshold you set, the buzzer & LED light will remind you.

    Review: Write a Review

    $8.48 $8.23, Save 3% OFF

    SKU:5IN1V3

    Weight: 0.10 kg

  • $5.69 $4.61, Save 19% OFF

    SKU:HUB5V12V

    Weight: 0.10 kg

  • ZMR250 V2 PDB

    Special sale on the spare arms for ZMR250 V2, suitable for 1806 motors, buy them CLICK HERE >>> Known as the ZMR250, C250, QAV250, H250, Blackout Clone or the Mystery 250, whatever the real name is, ZMR250 carbon fiber frame is probally one of the most popular mini quad frames in this hobby. We have taken the advise of many and reworked the ZMR250 V2 PDB. It now features ESC pads on the top and bottom of the board. Traces and main power distribution have been routed in a manner to avoid running under the arms. Optional 12V regulator w/ built in LC filter is now available.

    Review: Write a Review

    $32.99 $9.90, Save 70% OFF

    SKU:250V2PDB

    Weight: 0.10 kg




Find us on Google+ Watch us on Youtube Like us on Twitter Follow us on Facebook

Home   |   New Products   |   Multi-Rotors   |   FPV Airplanes   |   FPV Equipment   |   Battery / Chargers   |   Tools & Accessories   |  Site Map

Product Tags: ABCDEFGHIJKLMNOPQRSTUVWXYZ0-9

Copyright © 2015 FPVMODEL.COM®. All Rights Reserved.