Sorted:
  • *Pre-order* KL200RACE Racing Quadcopter with PCB Board
    *Pre-order* KL200RACE Racing Quadcopter with PCB Board

    Testing on the KL200RACE Racing Quad by Ka KeiIntroducing the FPVMODEL KL200RACE FPV racing quadcopter. It is a symmetric 200mm size airframe. The 200mm is measured motor shaft to motor shaft diagonally.The KL200RACE is built for FPV racing. It features a light-weight, symmetrical carbon fiber body. The frame has been stripped down to the bare essentials yet maintain the strength and durability. The weight is only 80 grams including the PDB and included hardwares.There are two ways to strap the LiPo battery, can be on the top plate or under the bottom plate. The KL200RACE comes with a 3D print mount to set your GoPro on for recording. If you like to strap the battery to the bottom, you can mount your GoPro on the top plate. Simply secure with the strap and you can fly! If you dont use the HD camera but FPV camera, you can directly put the battery on the top plate, and then mount the FPV camera (Like HS1177, HS1190) on the center part of frame. The angle of camera mounting can be adjusted from 0 degree to 60 degree as per your desire. The KL200RACE frame also comes with a small LED strip to set at the back. With only one LED, your airframe will be shinning and stand out other racing quadcopters. The colors of LED can be set via Cleanflight.The KL200RACE is not with a "X" type layout but a butterfly like shape to avoid the PID setting problem of usual X frames. It utilizes high quality 3K carbon fiber that is precision machined for a superb fit-and-finish. This Carbon Fiber is backed by FPVmodels name so you can trust that it is top of the line.Specs & Features4.0mm Main Frame2.0mm Top FrameAluminum Anodized & Stainless Steel HardwareLight Shell with SMA Holder ComboGoPro Mount82 Grams only (Including Frame, PDB and Hardwares) Friendly reminder: The battery showed in the pictures is not included in the frame kit.  Comes with a Matek PDB XT60 w/ BEC 5V/12VButterfly Shape of design so as avoid the PID problem of that some X frames may haveOnly 82 grames, including the PDB and hardwares.Two ways to put your battery. You can directly put the battery on the top plate, and then mount the FPV camera (Like HS1177, HS1190) on the center of frame.The KL200RACE comes with a 3D print mount to set your GoPro on for recording. You can strap the battery to the bottom and mount your GoPro on the top plate.A small LED strip is included to set at the back. With only one LED, your airframe will be shinning and stand out other racing quadcopters. The colors of LED can be set via Cleanflight.The parts included in the frame kits.

    Review: Write a Review

    $59.99

    SKU:KL200P

    Weight: 0.45 kg

  • DYS XDR220 FPV Racing Quadcopter
    DYS XDR220 FPV Racing Quadcopter

    DYS XDR220 is a special FPV racer with high performance flying experience for the pilots, especially for the FPV racing, aerobatics flight, aerial photograph, fantastic flight view etc.Features:* Brand new design with verified SpracingF3 flight controller system, high sensor algorithm, I/0 port, and the new generation CPU design, integrated with OSD, power distribution board on one small PCB board. * Equipped with FPV HD CCD camera, wide dynamic and good backlight, built-in 5.8G 200mW 40CH transmitter and 5dbi omnidirectional gain mushroom antenna.* The frame use high-end carbon fiber material which is light weight, high strength, non-deformation. The motor perfect match with esc for the power system. User can get a smooth flight after easy installation.* The frame comes with two covers, which can install 30° tilt angle FPV lens or 40° surface cover, easy to exchange for for different view angles. Additional white color 30° surface cover for DIY.* Compatible with remote control with 2.4G/6 channels or more. (Excluded)Specifications:-Wheelbase: 220mm-Whole frame weight: 310g-Motor: SE2205-2300KV-ESC: XS20A BLheli_S ESC-Prop: XT50403 Tri-prop-Flight control: XDR-F3-Transmitter: 5.8G/40CH/25mW to 200mW-The cover of camera angle: 30°/ 40°-Camera: 5V camera (CCD)-Battery (excluded): 3S-4S/1300mha-1500mha/35C-70C

    Review: Write a Review

    $330.00

    SKU:XDR220

    Weight: 1.00 kg

  • DAYA 680 New 3K Carbon Frame
    DAYA 680 New 3K Carbon Frame

    Feature:The empty frame is made of high quality 3K carbon fiber , with the aluminum and connecting fittings made by CNC.It has the folding design,can be easily carried for its appearence like a piece of A4 paper. The wheelbase is standard X shape with 680mm. The inner space is huge with 85x24.5mm and the height is 22mm. It weights 476g,and 4mm-thickness aluminum alloy motor base not included. After several tests this frame comes with high flexibility and resistance to fall off. Aerial fhoto gimbal is installed with integral front suspension.Users can flexibly adjust the battery installation position according to gravity center.Electrics recommended ( Not included ):Motor: FPVMODEL MC4012 480KV Motor - 4piecesESC: Hobbywing XRotor-Pro-40A- 4piecesPropeller: 1447- 2pairs

    Review: Write a Review

    $159.00

    SKU:DY680

    Weight: 0.90 kg

  • ZMR X-Lite 195mm Carbon Fiber Mini FPV Quadcopter Frame Kit with PCB Board
    ZMR X-Lite 195mm Carbon Fiber Mini FPV Quadcopter Frame Kit with PCB Board

    Smaller size, less weight and more speed.  The ZMR X-Lite 195mm Mini Quad is designed to use with 5 inch propellers. It has all the benefits of a 5 inch quad frame but less weight make it much more suitable for FPV racing. ZMR X-Lite 195mm keeps a simple X configuration yet leaving plenty of build room for adding all necessary FPV gear, including flight controller, XTx etc.Like ZMR250 V2, ZMR 180 and ZMR X-210, the ZMR X-Lite utilizes high quality 3K carbon fiber that is precision machined for a superb fit-and-finish. You can rest assured that this is NOT the run of the mill cheap eBay Carbon Fiber that most others sell. This Carbon Fiber is backed by FPVmodels name so you can trust that it is top of the line.Get yours today and enjoy the FPV!The ZMR X-Lite 195mm Mini Quad is also available in ARF Packages. Click HERE for more information!Thickness:Arms: 4mmTop plate: 2mmBottom plate: 2mmAluminum mounting: 35mmWeight: 130 grams (Frame and hardware totally)

    Review: Write a Review

    $29.99

    SKU:ZMR195P

    Weight: 0.50 kg

  • ZMR-X210 V1.1 210mm Carbon Fiber Mini FPV Quadcopter Frame Kit with PCB Board
    ZMR-X210 V1.1 210mm Carbon Fiber Mini FPV Quadcopter Frame Kit with PCB Board

    FPVModel ZMR-X210 Detailed Build by Mr. Joshua Bardwell"ZMR-X210 FPV & Motorcross" by Titan Chan, FPVModel Sponsored PilotThe ZMR-X210 is an evolution of the ZMR design, in keeping up with the changing times this ZMR was re-worked from the ground up. We are not just modifying the arms to give a "X" type of layout, we have re-worked it entirely to provide what the modern user wants. This frame features aluminum mounting hardware that allows for faster arm changes. This frame also gives the user options for weight saving. By using a single bottom plate the user can opt for weight savings by leaving out the 4mm spacers and "2nd" bottom plate. (This saves weight by eliminating the use of one plate and 8 4mm spacers.) The weight savings can be crutial in times of attending races but the arms being sandwiched between two plates and using the 4mm spacers allows for exceptional strengh improvement too. The choice is up to the pilot...save the weight in times of racing or use both plates when flying free-style and expecting to crash frequently and desire strenth over a few grams of weight savings. Featuring an X design made popular by the likes of Alien and QAVraceblade/R this quad is sure to help keep the center of gravity where you want it, in the center.The ZMR-X210 ARF packages are also available for your easy setup.Includes:1x ZMR-X210 Carbon Fiber Frame4x 4mm Carbon Fiber Arms 1X camera mount for Foxeer Arrow V2 HS1190 and the cameras in similar size (26mm)1x Board Camera Mount 1x Set of Steel screws, aluminum mounting hardware, and standoffs 1x Maytech PDB 2x FPVModel velco strap1x 1.5mm top plate 2x 2mm lower platesWeight: 174 grams (Frame and hardware totally ) Updated on May 18th, 2016: The ZMR-X210 has been upgraded to Version V1.1.V1.1   V1.0

    Review: Write a Review

    $52.99

    SKU:ZMR210VP

    Weight: 0.50 kg

  • ZMR180 V2 Mini Quad  Frame Kit 4mm Arms w/PDB
    ZMR180 V2 Mini Quad Frame Kit 4mm Arms w/PDB

    ZMR 180 Carbon FPV Mini Quad - Full Review By BMSWebThe ZMR180 is a micro quad designed with "fun" in mind. Agile, quick, and small all fit together with this kit and its a blast to fly. Keeping simplicty in mind this frame has high quality 4mm bottom plate and a 1.5 mm top plate. Using the same carbon fiber that you find in FPVMODELs ZMR250 V2, you can rest assured that this is NOT the run of the mill cheap eBay Carbon Fiber that most others sell. This CF is backed with FPVMODELs name so you can trust that it is top of the line. The ZMR180 is an awesome time to be had and you will find the smaller size can zoom through gaps that were previously not even considered with a 250 sized quad. The ZMR weighs in at 90g including the given mounting hardware and spacers allowing for an ultra-light weight build yet leaving plenty of build room for adding all necessary FPV gear. If you wanna add more muscle, pick the ZMR180 with the larger mounts for 22xx motors. ZMR180 Brief Build Manual: Click HereRecommended Parts (not included):Motor: 1806 /2204 /2206 (1806 for M2, 2204/2206 for M3, Suggest Use Dragonfly MC2206 2800KV Motors)Props: Dragonfly Bulletproof Bullnose 4045 PropsESCs: 12A -20AExtra standoffs: Click here (available in black, blue, silver and yellow)ARF Combo: http://www.fpvmodel.com/zmr180-180mm-carbon-fiber-mini-fpv-quadcopter-arf-combo_g1066.htmlUpdate on June 15th, 2016: Update the standoffs. Will send out the V2 frame from today. V2V1

    Review: Write a Review

    $37.99-$38.99

    SKU:ZMR180-4

    Weight: 0.50 kg

  • ZMR180 V2 Mini Quad Frame Kit w/PDB Special Edition
    ZMR180 V2 Mini Quad Frame Kit w/PDB Special Edition

    ZMR 180 Carbon FPV Mini Quad - Full Review By BMSWebThe colored edition ZMRs use the same high quality carbon fiber youve came to know and expect with the ZMR V2 and ZMR180 but have a high gloss colored glass fiber on top and bottom layers.The ZMR180 is a micro quad designed with "fun" in mind. Agile, quick, and small all fit together with this kit and its a blast to fly. Keeping simplicty in mind this frame has high quality 3mm bottom plate and a 1.5 mm top plate. Using the same carbon fiber that you find in FPVMODELs ZMR250 V2, you can rest assured that this is NOT the run of the mill cheap eBay Carbon Fiber that most others sell. This CF is backed with FPVMODELs name so you can trust that it is top of the line. The ZMR180 is an awesome time to be had and you will find the smaller size can zoom through gaps that were previously not even considered with a 250 sized quad. The ZMR weighs in at 72g including the given mounting hardware and spacers allowing for an ultra-light weight build yet leaving plenty of build room for adding all necessary FPV gear. If you wanna add more muscle, pick the ZMR180 with the larger mounts for 22xx motors. ZMR180 Brief Build Manual: Click HereRecommended Parts (not included):Motor: 1806 /2204 /2206 (1806 for M2, 2204/2206 for M3, Suggest Use Dragonfly MC2206 2800KV Motors)Props: Dragonfly Bulletproof Bullnose 4045 PropsESCs: 12A -20AExtra standoffs: Click here (available in black, blue, silver and yellow)ARF Combo: http://www.fpvmodel.com/zmr180-180mm-carbon-fiber-mini-fpv-quadcopter-arf-combo_g1066.htmlUpdate on June 15th, 2016: Update the standoffs. Will send out the V2 frame from today. V2V1

    Review: Write a Review

    $34.99-$35.99

    SKU:ZMR180-M

    Weight: 0.50 kg

  • ZMR250 V2.2 Mini Quad Frame Kit w/PDB Special Edition
    ZMR250 V2.2 Mini Quad Frame Kit w/PDB Special Edition

    ZMR250 V2 Reviewed by BMSwebUpdated on 11/27/2015: These colored ZMR250 V2 special editions have been upgraded to V2.1 that come with angled camera plate. Also the silver frame is newly released. The colored edition ZMRs use the same high quality carbon fiber you have come to know and expect with the ZMR V2 and ZMR180, but have a high gloss colored glass fiber on top and bottom layers.ZMR250 is probably one of the most popular FPV quadcopter frames. We have taken the time to make sure that this is the ZMR V2 you want. We have reworked the frame to include both top and bottom plates are "true" 2mm plates. We have also taken the advice of many and included 4mm thick arms. These arms are included in the package and there is no need to buy them seperately.( 4mm arms can be found running anywhere from 6-15 dollars each!) They are included in this package. Our carbon fiber has been sourced and quality checked to ensure that you are getting the best quality 3k carbon fiber around. Including a full PDB w/LED lighting system you cant find a better deal out there! Introducing the ZMR250 V2!!! Weight: 185 grams (Frame, hardware, and PDB totally )Update on June 15th, 2016: Update the standoffs. Will send out the V2.2 frame from today. V2.2V2.1

    Review: Write a Review

    $58.99 $56.04, Save 5% OFF

    SKU:H250V2

    Weight: 0.50 kg

  • ZMR180 V2 180mm Carbon Fiber Mini FPV Quadcopter Frame Kit  with PCB Board
    ZMR180 V2 180mm Carbon Fiber Mini FPV Quadcopter Frame Kit with PCB Board

    ZMR 180 Carbon FPV Mini Quad - Full Review By BMSWebDisscussion: Any questions regarding to the build and fly of ZMR180, please join the ZMR group and discuss here.  The ZMR180 is a micro quad designed with "fun" in mind. Agile, quick, and small all fit together with this kit and its a blast to fly. Keeping simplicty in mind this frame has high quality 3mm bottom plate and a 1.5 mm top plate. Using the same carbon fiber that you find in FPVMODELs ZMR250 V2, you can rest assured that this is NOT the run of the mill cheap eBay Carbon Fiber that most others sell. This CF is backed with FPVMODELs name so you can trust that it is top of the line. The ZMR180 is an awesome time to be had and you will find the smaller size can zoom through gaps that were previously not even considered with a 250 sized quad. The ZMR weighs in at 72g including the given mounting hardware and spacers allowing for an ultra-light weight build yet leaving plenty of build room for adding all necessary FPV gear. If you wanna add more muscle, pick the ZMR180 with the larger mounts for 22xx motors. Hurry up and get yours now, they are "flying" off the shelves.ZMR180 Brief Build Manual: Click HereRecommended Parts (not included):Motor: 1806 /2204 /2206 (1806 for M2, 2204/2206 for M3, Suggest Use Dragonfly MC2206 2800KV Motors)Props: Dragonfly Bulletproof Bullnose 4045 PropsESCs: 12A -20AExtra standoffs: Click here (available in black, blue, silver and yellow)ARF Combo: http://www.fpvmodel.com/zmr180-180mm-carbon-fiber-mini-fpv-quadcopter-arf-combo_g1066.htmlUpdate on June 15th, 2016: Update the standoffs. Will send out the V2 frame from today. V2V1 M2 (for 1806 motors)M3 (for 2204 or 2206 motors)

    Review: Write a Review

    $34.99-$35.99

    SKU:ZMR180

    Weight: 0.50 kg

  • ZMR250 V2.2 250mm Carbon Fiber Mini FPV Quadcopter Frame Kit with PCB Board and LED
    ZMR250 V2.2 250mm Carbon Fiber Mini FPV Quadcopter Frame Kit with PCB Board and LED

    Update History:1. Updated on Aug. 25th, 2015: The ZMR 250 V2 is now shipped out with newest model of PDB. PDB V1.2, features ESC pads on the top and bottom of the board. Traces and main power distribution have been routed in a manner to avoid running under the arms. Optional 12V regulator w/ built in LC filter is now available.2. Updated on Nov. 27th, 2015: The V2.1 version of ZMR250 has been newly released. It comes with angled camera plate. 3. Updated on Dec. 8th, 2015: The ZMR V2 PDB has been updated to V1.3. This includes extra room for traces to give more clearance from carbon fiber clearance plate. 4. Updated on June 15th, 2016: Update the standoffs. Sending out the V2.2 frame from today.ZMR V2 - Bye Bye Lipo By BMSWebDiscussion: Any questions regarding to the build of ZMR250 V2? Welcome join the ZMR250 V2 Group and discuss!Quality, Affordability, Convenience! Be the first to own the ZMR250 V2 Mini Quad!!!ZMR250 is probably one of the most popular FPV quadcopter frames. We have taken the time to make sure that this is the ZMR V2 you want. We have reworked the frame to include both top and bottom plates are "true" 2mm plates. We have also taken the advice of many and included 4mm thick arms. These arms are included in the package and there is no need to buy them seperately.( 4mm arms can be found running anywhere from 6-15 dollars each!) They are included in this package. Our carbon fiber has been sourced and quality checked to ensure that you are getting the best quality 3k carbon fiber around. Including a full PDB w/LED lighting system you cant find a better deal out there! Introducing the ZMR250 V2!!! Weight: 185 grams (Frame, hardware, and PDB totally )Features:"True" 2mm Top & Bottom Plates4mm Thickness on Arms for Added DurabilityFull PDB w/LEDRecommended Parts for ZMR V2 (Not Inlcuded):Motors: Dragonfly MC1806, T-motor MN1806 (For M2 Frames); FPVmodel MC2204, T-motor MN2204 (For M3 Frames) Props: Dragonfly 5030 CW/CCW PropsBattery: 1300MAH-2200MAHESC: DYS SN20A Mini ESC, FVT LittleBee 20A ESCPower combo: click hereReplacement Arms: Click here (Shouldnt need em but...somebodys gonna ask.)Extra Standoffs: Click here (Available in black, blue, silver and yellow. Make your ZMR250 individuality and style!!!)ZMR V2 Build Instructions: PDF file Download, or reference to ZMR250 V2 Build Manual.The ZMR250 V2 is also available in ARF packages which contain almost everything you need to build. If you are not sure about what spare parts are required, simply refer to the parts listed in the ARF Kits.ARF Kits (Standard): http://www.fpvmodel.com/zmr250-v2-250mm-mini-quadcopter-fpv-arf-combo_g1006.html.ARF Pro w/ T-motor MN2204/MN2206 Motors: http://www.fpvmodel.com/zmr250-v2-arf-pro-w-t-motor-mn2204-mn2206-motors-optional-_g1049.htmlARF Pro w/ T-motor MN1806 Motors: http://www.fpvmodel.com/zmr250-v2-arf-pro-w-t-motor-mn1806-motors_g1055.htmlUpdate on June 15th, 2016: Update the standoffs. Will send out the V2 frame from today. ZMR250 V2.2ZMR250 V2.1ZMR250 V2Update on August 25th: If you want to use 4S lipo, you’ll need this regulator as the camera or transmitter require an inputof 12V. The regulator click here. New PDB board

    Review: Write a Review

    $53.00-$58.99

    SKU:H250-V2

    Weight: 0.50 kg

  • RTS200 200mm Mini Quadcopter Frame Kit
    RTS200 200mm Mini Quadcopter Frame Kit

    RTS200, also known as Q200, is an excellent mini racing quad. It features fast, stable cross flight and easy to control. Made of carbon fiber, the weight is light but very strong and you will no worry serious damage when crashing. Simple structure yet ensure right places to put on all the necessary FPV system and parts. Reasonable design and precise detail equiped with our recomended parts that make sure you get a super cool flying experience. RTS200 mini quad is a good option for people who enjoy the fast violent racing. Also very suitable for FPV starters.Weight:70gMaterial:High Quality Twill-matte Pure 3k Carbon Fibre 1.0 mmRTS200 mini quad is also available in ARF and RTF packages. If you are not sure what other parts needed for building your RTS200, simply refer the parts included in RTS200 200mm Mini Quad ARF RTF combo. It is matched well with Dragonfly 1306 motor KV3100 motors and Dragonfly 12A ESC. As per our internal test, the flight time can be up to 12 minutes.RTS200 ARF/RTF Packages: Click Here Recommended Power Combo: Click HereBuilding Instructions:  RTS200 200MM Mini Quadcopter Build InstructionsNote: Price for RTS200 200MM Mini Quad Frame Kit Only. It does not include props, ESCs, motors, camera and battery etc.For reinforcing the frame strength, two extra light and strong carbon fieber plates are included to add on the arms. See the pictures below:Recommended PID

    Review: Write a Review

    $26.99 $12.96, Save 52% OFF

    SKU:Q200-C

    Weight: 0.10 kg

  • FPV 5.8g 200mw FPV System Set FS-3 for Mini Multirotor
    FPV 5.8g 200mw FPV System Set FS-3 for Mini Multirotor

    This is a simple Transmission set with reliable and quality parts.Plug and play,cables are pre-made with matching connector, so no soldering or guesswork is required. You can use it with the monitor or 5.8g goggles as you please,also it very suitable for mounting on the mini multirotor.We tested everything to make sure every part performed well.You can click the related product pages for the details.Package inclued:Aomway mini 200mw TX  x 1Aomway 5.88 4-leaf clover antenna x 14140+811 camera x 1L style connector x 1pre-made cable and accessoriesWe also offer you the receiving set package,as picture showed below.It  includes a RC832  receiver and aomway clover antenna,with pre-made cables will be perfectly working with the transmission combo package.you can choose if you need it.Update History: 1. Update on August 8th,2016 : The Aomway mini 200mw TX has been changed to Dragonfly 5.8G 40CH Mini TX 200mw.

    Review: Write a Review

    $36.00-$86.90

    SKU:FS-1

    Weight: 0.40 kg




Find us on Google+ Watch us on Youtube Like us on Twitter Follow us on Facebook

Home   |   New Products   |   Multi-Rotors   |   FPV Airplanes   |   FPV Gimbal   |   FPV Equipment   |   Battery / Chargers   |   Tools & Accessories   |  Site Map

Product Tags: ABCDEFGHIJKLMNOPQRSTUVWXYZ0-9

Copyright © 2015 FPVMODEL.COM®. All Rights Reserved.