Sorted:
  • MFDlink / Rlink 433MHz Long Range UHF 8CH SBUS RX

    MFDLINK / Rlink 433MHz Long Range UHF 8CH SBUS RX. Specifications:8CH standard channel, can be extended to 16chDimension: 45*30*6mmWeight: 16gWork Voltage: 4-6VWork Current: 75mA@5VPackage Included:1* Receiver2* Receiver antenna  (Available in white and black , we will send them to you at random.)You might also like: Rlink V2 433MHz 16CH Long Range UHF TX and 8CH SBUS RX ComboCaution: Make sure the wires are correctly connected, or it will cause damage.

    $45.00

    SKU:R433-R

    Weight: 0.15 kg

  • 50KM Long Range FPV Sets for Fixed Wings

    MyFlyDream 50km LongRange FlightThese are professional FPV sets for long range flight based on MyFlyDreams system (see the above video). The items in each combo are specially selected and pre-tested for the fixed wings that with a wingspan over 1500mm. As per MyFlyDreams internal test, the flight range can be up to 50km. However, the range may be different under different circumstances.Our engineers can help with the soldering and wiring work, including solder the current sensor and ESC. Totally free!!!If there’s any special requirements, like change the flight controller to Panda Autopilot w/ ground station, or change the camera to others, please feel free to contact our customer service at service@fpvmodel.com. One of our staff will confirm with you whether the change is doable or not.Plug and play. We’ve added the voltage regulator module and XT60 plug, modified the transmitter and camera with servo plug. All the parts are pre-tested to ensure that they are well matched and performed. Note: Due to our engineers need to do the soldering, wiring work and test the equipment before send out. It might take 2 days after you place the order.Please make sure you understand and accept this before purchasing, thank you! Combo 1 package include :AOMWAY 1200TVL 960P HD Mini Camera x 11.2G 5.8G Micro BEC w/CNC Enclosure 5V  x 1AOMWAY 5.8G 15CH 1000mw TX  x 1FPVModel Dual channel 5.8G 40CH receiver  x 1XT60 Male To Two DC 5.5mm Plug Connecting Wire  x 1Super 7 inch TFT Color LCD Snowflakes Screen  x 1MFD MyFlyDream  with 50A current sensor  x 1 ( or you can choose  100A current sensor ,need to tell our customer serive staff )and other accessoriesCombo 2  package include :AOMWAY 1200TVL 960P HD Mini Camera  x 11.2G 5.8G Micro BEC w/CNC Enclosure 5V   x 1AOMWAY 5.8G 15CH 1000mw TX   x 1Sharp Vision 7 Inch LED Monitor With Built-in 5.8G Dual Receiver and DVR  x 1Aomway 5.8G 5DBi High Gain Omni Antenna  x 1Aomway 5.8GHz 14dBi High Gain Mini Panel Antenna  x 1RP-SMA Male to SMA Female Adapter  x 1MFD MyFlyDream  with 50A current sensor   x 1  ( or you can choose  100A current sensor ,need to tell our customer serive staff )Rlink V2 433MHz 16CH Long Range Combo   x 1and other accessoriesCombo 3  package include :MYFLYDREAM AAT Automatic Antenna Tracker 6 channels  x1 ( or you can choose MYFLYDREAM AAT Automatic Antenna Tracker 12 channels ,need to tell our customer serive staff, fill 25USD price difference. Click here for 25USD price difference.)FPV 1.2G 5.8G Micro BEC w/ CNC Enclosure 12V  x 2Orignal Amass XT60 plug  x13M Super Strong Double Sided Adhesive  x1FreeFlight Velcro Battery Strap  x2FPVMODEL Velcro Battery Strap   x2sunshade sun hood for 7 inch x1Rlink V2 433MHz 16CH Long Range Combo   x 1FPVModel Dual channel 5.8G 40CH receiver  x 1AOMWAY 1200TVL 960P HD Mini Camera  x 11.2G 5.8G Micro BEC w/CNC Enclosure 5V  x 1AOMWAY 5.8G 15CH 1000mw TX  x 1XT60 Male To Two DC 5.5mm Plug Connecting Wire  x 1Super 7 inch TFT Color LCD Snowflakes Screen x 111 inch Articulating Friction Magic Arm + Super Clamp   x1MFD MyFlyDream Autopilot OSD Flight Stablizer with 50A current sensor  x 1 ( or you can choose  100A current sensor ,need to tell our customer serive staff )MFD 5.8G 23db High Gain Flat Antenna Panel x1and other accessoriesNote: The tripod is not included.

    $396.99-$915.99 2

    SKU:HFPVC-L

    Weight: 4.00 kg

  • Rlink V2 433MHz 16CH Long Range UHF TX and 8CH SBUS RX Combo

    Rlink V2 433MHz 16CH Long Range UHF TX and 8CH SBUS RX ComboFeatures:High sensitivity, up to -115dbm16Bit ID, RAFHSS algorithmSupport almost all 2-18CH transmitter only if there is coach portPower two mode switchable: 400mW/800mW, Built-in buzzer, suggest use high power mode only under out of control situatioSupport sending port one button setting protectionSupport head tracker, plug and playIndependant 2-way PPM input, support 2 transmitter input synchroSupport 1 to more, or more to oneFrequency 410M-510MHz adjustableTransmitter/receiver built-in Micro USB portTransmitter EXT port used for expansion function, built-in support Futaba Sbus and Spektrum/JR satellite port protocol, support external rock control, 2-way communication, external BLT connectionTested transmitter included: Futaba, Spektrum/JR,Turnigy/Flysky/Imax 9X2, Frsky Tarinis, WLFY, Walkera, etc.SpecificationsTransmitter:Work frequency: UHFDimension: 73*65*15mmWeight: 64gWorking voltage: 7-16vCurrent: 180mA@12V low power mode; 360mA@12V, high power modeReceiver:8CH Standard channel, can be extended to 16chDimension: 45*30*6mmWeight: 16gWork voltage: 4-6VWork current: 75mA@5VPackage Included:1* Rlink V2 433Mhz 16CH UHF Transmitter1* TX antenna1* MFDlink / RLink Receiver2* Receiver antenna (Available in white and black , we will send them to you at random.)2* Data cableNote: you can buy together with Futaba adapter cable to realize plug and play. Caution: Make sure the wires are correctly connected, or it will cause damage.

    $169.00 $148.72, Save 12% OFF

    SKU:RLSBV2

    Weight: 0.20 kg

  • FY-605 Radio Station System & GCS Upgrade Package for UAV Remote Control

     Features1. Transmission PowerThe standard transmit power 2W/1W, users can set it, High receiving sensitivity: -123dbm2. Working FrequencyCarrier Frequency: 433MHz, options of 402-470MHz.3. Low power consumptionDC5V Power, Receiving current <50mA, transmitting current <1.5A/2W (<1A/1W); Sleeping current <1mA.4. Working TemperatureThe real industrial product, the working temperature is -40℃~+85℃5. Output/ Input InterfaceIt can provide RS-232, RS-485, and TTL.6. Power controlOne sleeping model: awaken from hardware7. Circuit StructureRadio adopts chip integration, the conversion time for transceiver is short <20 ms, all indications consistency, and better performance.8. High Anti-Interference and Low BER (Bit error Rate)Based on the GFSK modulation mode, it adopts the efficient communication protocol. The actual bit error rate is 10-5~10-6when channel bit error rate is 10-2.9. Long transmission distanceWithin the range of visibility, the reliable transmission distance can be 5km-15km when place the antenna higher than 3m.10. Transparent data transmissionTransparent data interface is offered, which can be fit for nonstandard user protocol. Any false data generated in the air can be filtrated automatically (What has been received is exactly what has been transmitted). The change time for receiving and sending <10ms.11. Multi-channel and speedFY-605 provides various baud rate 1200, 2400, 4800, 9600, 19200 and 38400bps. The wireless transmission speed and the connection baud rate are proportional, to satisfy the customer’s equipment.12. High speed wireless communication and big data bufferWhen the RF baud rate is bigger than the COM baud rate, it can transmit unlimited data at one time, and when the RF baud rate is smaller than or was equal to the COM baud rate, may transmit 512 bytes data.13. Intelligent data control and the user doesn’t need to prepare excessive programsEven it’s half duplex, the user doesn’t need to prepare excessive programs, only receiving/transmitting the data from the interface. FY-605 will automatically complete the other operations, such as transmission/receiving conversion in the air, control, etc.14. High reliability, small and lightSingle chip radio frequency integrated circuit and lessened peripheral circuits, high reliability, and low failure rate.15. Watchdog monitorWatchdog monitors the inner function, so it can change the traditional product structure and improve the product reliability. Application* AMR Automatic Meter Reading;* Wireless alarm and security systems;* Wireless conference voting system;* Sports training & competition;* Wireless dishes ordering;* Electronic bus station and intelligent traffic;* RF transmitter wireless electronic display screen and queuing machine;* Point to multi-point wireless network, wireless on-the-spot bus and automatic data collection system   Update on July 22th : There are two remote control mode, the default setting for the RC receiver mode.Directly connected to an RC receiver RC mode, selected data transmission with a remote control adapter plate and several transmission radio remote control radio remote control mode ( you need to buy another ground station upgrade package)Package included:- FY-605 Radio x2- FY-605 Power Supply Wire - Antenna x2- FY-605 CD - DB9 Head x2 - User ManualUpgrade Pack Included: (add on July 22th)- 1* Adapter Board- 2* FY-605 radio system(433MHZ)- Cables- GCS software CD

    $295.00 $283.20, Save 4% OFF

    SKU:FY605DR

    Weight: 0.50 kg

  • FY-602 433Mhz Data Radio Station & GCS Upgrade Pack for UAV Remote Control

    Briefly IntroduceFY-602, the Low power wireless module, is used as the wireless data transmission in short distance.With the small size, weight and power consumption and good stability and reliability, it has the function of bi-directional data sign transmission, test and control.It is used for Wireless meter reading, such as water meter, electric meter and gas meter, parking meter, intellective card, electronic weighing apparatus, meter for checking on work attendance, queue wireless meter, building control, shipping company control, alarm system, intelligent equipment, Automatic data collecting system; Industrial remote control and remote test building automation, safety and security, powerhouse equipment wireless monitor, entrance control system, etc. It provide the USB power interface to be convenient for the mini computer and PC users if necessary. Package included:- FY-602 Radio x2- Connect Cable - Antenna x2- 602 DiskUpgrade Pack Included: (add on July 22th)- 1* Adapter Board- 2* FY-602 radio system(433MHZ)- Cables- GCS software CD  Update on July 22th : There are two remote control mode, the default setting for the RC receiver mode.Directly connected to an RC receiver RC mode, selected data transmission with a remote control adapter plate and several transmission radio remote control radio remote control mode ( you need to buy another ground station upgrade package)Feature1. Ultra low power transmission    Transmission power: 500mW,    High receiving sensitivity: -123dbm,    Size: 63mm*43mm*15mm2.  Low power consumption    Receiving current<45mA,    Transmission current<360Ma,    Sleeping current <1mA.3. Saving power model    FY-602 have three saving power models:awaken from Hardware, awaken from COM Port, awaken from Air;4. ISM frequency band, not requiring on application of frequency point    Carrier frequency of 433MHz,also capable of 915MHz.5. High anti-interference and low BER (Bit error Rate)    Based on the GFSK modulation mode, it adopts the efficient communication protocol. The actual bit error rate of 10-5 ~ 10-6 can be achieved when channel bit error rate is6. Long transmission distance    Within the range of visibility, the reliable transmission distance is(BER=10-3/1200bps)>3000m when the antenna height is greater than 3m (BER=10-3/9600bps).7. Transparent data transmission    Transparent data interface is offered to suit any standard or nonstandard user protocol. Any false data generated in the air can be filtrated automatically (What has been received is exactly what has been transmitted). The charge time for receiving and sending <10ms8. Multi-channel and speed    The standard FY-602 configuration provides 16 channels. to meet the multiple communication combination mode of the users. It has baud rate to be chosen such as 1200bps、2400bps、4800bps、9600bps、19200bps、38400bps. The wireless transmission rate is direct ratio with baud rate of interface to meet user’s equipment requirement. 9. High speed wireless communication and Large data buffer    When the speed rate in the air is quicker than interface’s, allowing to transmit unlimited length data at one time, when the speed rate is slower or equal the interface’s, allowing the transmission of 255 Bytes long data frames at one time for more flexible programming by users.10. Intelligent data control and the user doesn’t need to prepare excessive programs    Even for semi duplex communication, the user doesn’t need to prepare excessive programs, only receiving/transmitting the data from the interface. FY-602 will automatically complete the other operations, such as transmission/receiving conversion in the air, control, etc.11. High reliability, small and light    Single chip radio- frequency integrated circuit and single chip MCU are used for lessened peripheral circuits, high reliability, and low failure rate.12. Watchdog monitor    Watchdog monitors the inner function, so it can change the traditional product structure and improve the product reliability.

    $239.00 $219.88, Save 8% OFF

    SKU:FY602DR

    Weight: 0.50 kg

  • New RMILEC T4047NB20 400-470MHZ 433mhz UHF LRS Long Range RC System

    The NB20 system adopts the latest RF technology, providing very high adjacent channel rejection ratio and anti-blocking performance, which gives rise to the outstanding anti-jamming capability of the new system. The NB20 receiver can detect the frequency and amplitude of EMI interference with unbeatable accuracy and precision based on the extremely low self-noise of -125dBm. The RF performance of NB20 system surpasses the older 4047 systems several orders of magnitude. Furthermore, NB20 system takes high-speed processor for signal acquisition and output with very high precision. Its high efficiency transceiver can make full use of band width limitation and spend shorter time to work out data exchanging,and frequency calibration. As for operation, The NB20 system is compatible with any receiver to construct a signal relay system. It is highly compatible with mature products on the present market, such as FUT, JR, HITEC, TDF, FS, XINYI etc. There is no need for consumers to change the old remote control system or any parameter settings to directly extend the remote control range. PWM output-and-input is one-to-one. It can relay signal with very high precision. By using the powerful forwarding of 20 channels, UAV’s parameter can be adjusted in the air, and the aerial cameraman and pilot could work together with single radio. In addition, one transmitter can be shared by several operators. As for the receiver, either EMI or RSSI signal can be displayed on LED, which allows debugging according to the visual signal strength. The new system is of longer remote control distance and higher reliability, because the source of interference can be more quickly and accurately ruled out.TX:The hardware operating frequency: 400-470MhzUse three frequency hopping. Scan interfering frequencies before TX(i.e., Listen Before Talk).RX:The receiver has the spectral analysis ability with the range of 400~470Mhz, whichleads to scan interfering frequencies of on board equipments in detail to frequency band with lowest background noise.-Average RF power: 5w (peak number is 5.8W )-Sensitivity: -115dBm-Adjacent Channel Rejection: Very High-Anti Signal-blocking: Very High-Default Operating Frequency: 435 +/-2.5,445 +/-2.5, 455 +/-2.5, 433ISM-Signal Of Servo For Transmission: 20 channels-Signal of Servo For Output: PWM output 20 channels PPM output 20 channels SBUS output 18 channels-Input Mode: PPM, PWM,SBUS-Control Mode: One to manyAir Receiver Selection/Features Chart

    $475.00 $437.00, Save 8% OFF 1

    SKU:4047NB20

    Weight: 0.80 kg

  • MYFLYDREAM AAT Automatic Antenna Tracker V5.0 For Long Range FPV 6 channels

    MFD Innovation. The original best ever automatic antenna tracking solution.Description:- The standard combo contains everything you need to set up your basic MyFlyDream-Tracking system. The only thing you will need is a GPS unit. The MyFlyDream Tracking system will work with almost every GPS that uses the NMEA standard. - The TeleFlyOSD is connected to your GPS unit and transmits the GPS data to the ground via the audio channel of your AV transmitter. On the ground it is fed through the AAT (Automatic Antenna Tracker) to the MyFlyDream-Driver. The Driver handles the signal and controls the servos to turn the AAT.- What makes the MyFlyDream Tracking System so special:- The high quality slipring provides endless rotation, meaning endless freedom, you will never again temporarily loose your signal because the tracker has reached its maximum rotation angle and is turning over to the other side.- The built-in compass unit makes setting up the tracker on the flying field a breeze. No need to check the correct orientation by hand or walk around with your plane in hand, just put your MyFlyDream AAT on a tripod or other support, connect everything with a power source, wait for a proper GPS fix, push "Set Home" and FLY. It′s as simple as that.-Professional Teleflypro OSD (26g with cables).Automatic Antenna Tracker in actionMFD AAT FeaturesNo specific OSD requirement for tracking your airplane.The high quality slipring provides continuously rotation, meaning compete freedom of rotation, you will never again temporarily loose your signal because the tracker has reached its maximum rotation angle and is turning over to the other sideThe built-in compass unit makes setting up the tracker on the flying field in no time. No need to check the correct orientation by hand or walk around with your plane in hand, just put your MyFlyDream AAT on a tripod(not included)or other support, connect everything with a power source, wait for a proper GPS fix, push "Set Home" and FLY. It′s as simple as that.Professional Teleflypro OSD (26g).Includes:- AATDriver x 1- MyFlyDream 6CH Tracker x 1- USB-TTL Programmer cable x 1- TeleFlypro OSD x 1- cables- GPS module and plate antenna are not included. You can use MFD 10hz GPS Module or other standard GPS modules.How MFD AAT worksThe TeleFlyOSD is connected to your GPS module and fetch the GPS coordinates data to the ground via the audio channel of your Wireless AV transmitter.The encoded signal through AUDIO channel fed through the AAT (Automatic Antenna Tracker) to the MyFlyDream AAT Driver(AATDriver). AAT Driver handles the signal and controls the servos to tracking your airplaneTo Make the MFD AAT fully functional, you will also needA Combo Set of Wireless AV Transmitter & Receiver A Directional Patch AntennaA TripodA GPS Module Download AAT Manual 

    $335.00 $324.95, Save 3% OFF

    SKU:MFDAAT6

    Weight: 1.60 kg

  • MYFLYDREAM AAT Automatic Antenna Tracker V5.0 For Long Range FPV 12 channels

    MFD Innovation. The original best ever automatic antenna tracking solution.Description:- The standard combo contains everything you need to set up your basic MyFlyDream-Tracking system. The only thing you will need is a GPS unit. The MyFlyDream Tracking system will work with almost every GPS that uses the NMEA standard. - The TeleFlypro OSD is connected to your GPS unit and transmits the GPS data to the ground via the audio channel of your AV transmitter. On the ground it is fed through the AAT (Automatic Antenna Tracker) to the MyFlyDream-Driver. The Driver handles the signal and controls the servos to turn the AAT.- What makes the MyFlyDream Tracking System so special:- The high quality slipring provides endless rotation, meaning endless freedom, you will never again temporarily loose your signal because the tracker has reached its maximum rotation angle and is turning over to the other side.The 12CH AAT Package includes a 12 channel slipring, so you have 7 spare channels where you can feed another signal through. You can use that for a second video channel and/or an extra audio channel.- The built-in compass unit makes setting up the tracker on the flying field a breeze. No need to check the correct orientation by hand or walk around with your plane in hand, just put your MyFlyDream AAT on a tripod or other support, connect everything with a power source, wait for a proper GPS fix, push "Set Home" and FLY. It′s as simple as that.-Professional Teleflypro OSD (26g)Automatic Antenna Tracker in actionMFD AAT FeaturesNo specific OSD requirement for tracking your airplane.The high quality slipring provides continuously rotation, meaning compete freedom of rotation, you will never again temporarily loose your signal because the tracker has reached its maximum rotation angle and is turning over to the other sideThe built-in compass unit makes setting up the tracker on the flying field in no time. No need to check the correct orientation by hand or walk around with your plane in hand, just put your MyFlyDream AAT on a tripod(not included)or other support, connect everything with a power source, wait for a proper GPS fix, push "Set Home" and FLY. It′s as simple as that.Professional Teleflypro OSD (26g with cables)Includes:- TeleFlypro OSD x 1 - AATDriver x 1 - MyFlyDream 12CH Tracker x 1 - USB-TTL Programmer cable x 1 - Cables and adapter- GPS module and plate antenna are not included. You can use MFD 10hz GPS Module or other standard GPS modules.How MFD AAT worksThe TeleFlyOSD is connected to your GPS module and fetch the GPS coordinates data to the ground via the audio channel of your Wireless AV transmitter.The encoded signal through AUDIO channel fed through the AAT (Automatic Antenna Tracker) to the MyFlyDream AAT Driver(AATDriver). AAT Driver handles the signal and controls the servos to tracking your airplaneTo Make the MFD AAT fully functional, you will also needA Combo Set of Wireless AV Transmitter & ReceiverA Directional Patch AntennaA TripodA GPS Module Download AAT Manual

    $360.00 $349.20, Save 3% OFF 1

    SKU:MFDAAT12

    Weight: 1.80 kg

  • Skylark AAT IV Auto Antenna Tracker w/Compass Bluetooth for FPV

    Description:Skylark AAT IV Auto Antenna Tracker w/Compass Bluetooth for Multicopters FPVFeatures:- Installatin is fast and simple- Tracks 360o horizontally and 90o vertically- Build in compass- Build in bluetooth- Metal Gear- With power module- Dual serv- Support other brand OSD- Firmware upgradeNote: For using with other brand OSD,you will need the converter,the converter need purchase separately,its not included in the package.Update on July 24th, 2017: The power mould have color silver and black. We send by random.

    $320.00 $278.40, Save 13% OFF 1

    SKU:SLAAT

    Weight: 1.50 kg




Find us on Google+ Watch us on Youtube Like us on Twitter Follow us on Facebook

Home   |   About Us   |   New Products   |   Multi-Rotors   |   FPV Airplanes   |   FPV Equipment   |   Battery / Chargers   |   Tools & Accessories   |   Contact Us   |   Blog   |  Site Map

Product Tags: ABCDEFGHIJKLMNOPQRSTUVWXYZ0-9

Copyright © 2015 FPVMODEL.COM®. All Rights Reserved.