Sorted:
  • TAROT ZYX-OSD On-Screen-Display Video Overlay System for FPV TL300C

    Product Description:- ZYX-OSD aircraft in flight can be basic flight information such as altitude, speed, attitude angle, battery, pressure, aircraft and return point distance control mode, runaway protection status, superimposed on the video information, make sure you enjoy the flight to bring all the fun.- ZYX-OSD also has data logging capabilities, the flight data is stored into the MINI-SD card, allowing you to perform data analysis, black box play a role at a critical time. Please first use, to ensure that mini-sd formatted as FAT32 format.- ZYX-OSD has two-way video input, video input source can be switched by remote control, the video standard PAL and NTSC can be automatically identified.Please note: ZYX-OSD must be used in conjunction with ZYX-M flight control system.Specification:Input voltage and current: 12V (80mA) ( not power to external device)Output voltage and current: 12V (1.5A) and 5V (2.0A)Size: 53mm * 36 mm * 10 mmWeight: 18gVideo format: PAL / NTSC (automatic recognition)

    Review: Write a Review

    $30.00 $26.10, Save 13% OFF

    SKU:TL300C

    Weight: 0.10 kg

  • Tarot 7 inch 3-Blade Propeller CW/CCW for FPV Multicopter 1 Pair

    Suitable for mini-300/350 and other mini-cross machine. TAROT using the new optimized airfoil design and high-strength engineering plastic injection material to ensure good flexibility and rotor wing stability. Color rotor in the air with the most eye-catching effect, with multi-color front and rear rotors help to distinguish between the front and rear of the body state.Specification:- Diameter: 7 inch- Pitch: 4.5 inch- Center hole diameter: 5mm- Center hole height: 7.5mm- Weight: 6.4g/pcs- Color: Yellow / Green (optional)Package included:- 1* CW 7" 3-blade propeller- 1* CCW 7" 3-blade propeller

    Review: Write a Review

    $2.60 $2.47, Save 5% OFF

    SKU:TL30P

    Weight: 0.10 kg

  • Tarot T4-3D 3-Axis Brushless Gimbal for GOPRO

    Tarot T4-3D three-axis-stabilized head designed for GOPRO HERO3 / HERO4 same size and weight of the camera customization, integrated TAROT series PTZ all high-end technology. Using a combination of aluminum and plastic structure, bringing light weight and stability of the strongest, even in extreme harsh environments, also accurate to lock the camera to maintain a high degree of stability, output ultimate experience of fine industrial grade screen, is the best choice for professional video and aerial photography enthusiasts.Tarot T4-3D-axis auto-PTZ PTZ advanced control algorithms, the built-in stand-alone IMU precise attitude control PTZ, PTZ integrated servo drive module. Support point to follow (PF) and the first person (FPV) modes. All the power and signal lines subtly embedded in the head structure. Pitch axis speed-controlled, the amount of rocker lever corresponding pitch axis rotation speed, the greater the amount of rotation of the lever faster. Integrated from aluminum alloy and industry plastic, bringing light-weight and high-stability. T4-3D is the best choice for professional video and aerial photography enthusiasts.Tarot T4-3D 3-axis stabilized gimbal is designed for GOPRO HERO3 / HERO4 and similar cameras. Applicable to multi-copters, fixed wing airplanes, and heli-copters.Equipped with independent IMU module. Support point follow mode (PF) and the first person view (FPV) mode.The innovative mechanical structure allows the operating speed controllable. The joystick movement is corresponding to axis speed; the bigger movement is, the faster axis speed will be.   All the power and signal wires are embedded in the structure.Support PC interface setting. Firmware upgradable.Features:PC interface - Windows XP/ VISTA/7/ 8 (32 or 64 bit)Point follow mode (PF)First-person view mode (FPV)Built-in independent IMU modulesTAROT PTZ dedicated servo moduleAV output interfaceWide range voltage inputSupport conventional receiver / S-Bus receiver / DSM receiversAccessories:Support Camera: GOPRO HERO3 / HERO4 / other similar camerasInput Power: 2S ~ 6S LiPo batteryMechanical / electrical characteristics:Angle control accuracy: ± 0.02 °Maximum controllable speed: Pitch direction (TILT): ± 200 ° / sControllable range of rotation: Pitch direction (TILT): -120 ° to + 15 °Operating Current: 30mA (@ 25V) 50mA (@ 12V)Stall Current: 350mA (@ 25V) 700mA (@ 12V)Working temperature: -20 ° C ~ 50 ° CWeight: 178gSize: 99mm × 88.5mm × 105.6mmSpecification:Tarot T4-3D 3-axis Brushless Gimbal x1Main controller module x1Connector cable x15V output, servo and video cable x1USB module x1Flight controller connector x1Box x1

    Review: Write a Review

    $142.46 $79.78, Save 44% OFF

    SKU:TL3D01

    Weight: 0.50 kg

  • Tarot ZYX-M Flight Controller for multi-copter ZYX25

    Update on Dec. 3rd, 2015: Add the V1.01 upgrade to V1.04 manual.The revolutionary flight controllerWith multiple new technologies, Tarot ZYX-M simplifies all complicated operation and brings you easy and natural flight experiences.To upgrade the flight features, ZYX-M is equipped with smart computing and navigation control systems. Pilots can adjust tilt, roll, and pan axis through setup software according to different preferences.Furthermore, it supports fail safe and voice alarm, including range setting and no-fly zone alarm. ZYX-M keeps the multi-copter under control during flights. Main controller:32 bit processorBuilt-in anti-vibration sensorFull metal caseSupports dual S-BUS receiverSupports dual DSM satellite receiverSpecific Interface for TAROT gimbal controlGPS module:Highly efficient GPS receiverHigh gain antennaFast and accurate locatingPMU module:Dual power outputSupports power output to flight controller, gimbal, and video TX in the same timeIntegrated voltage testLow voltage alarmLED indicator:Indicates the multi-copter status in real-timeStandard accessory: USB moduleFeatures:Support 9 kinds of multi-copter. With 3 servo ports for higher compatibilityAccurate speed control under GPS mode:Under GPS flight mode, the flight speed is proportionally equal to joystick movement, and the level speed is proportionally equal to throttle stick movement. Failsafe, one key go-home, IOC(Intelligent Orientation Control), POI(Point of Interest):If the multi-copter lost the signal, it can return to launch and land. When the signal works normally, pilot can pull and switch and activate one key go-home. Smart retractable landing gear:Once activate the feature, the landing gear will automatically extend in emergency case (ex: auto-landing). Pilot can control the landing gear through radio transmitter after flight height exceeds 5 meters. Flight range programmable and no-fly zone protect:Under GPS flight mode, the multi-copter will fly inside the setting range only. Under other flight mode, once the multi-copter fly outside the setting range, the auto return-to-launch will be activated. In places near airport and no-fly zone, the flying height and range are restricted. Prop failsafe (Hex-copter or above)For Hex or above copters, when one of the motor or prop doesn’t work, the multi-copter will fly normally.  

    Review: Write a Review

    $129.90 $114.31, Save 12% OFF

    SKU:ZYX25

    Weight: 0.50 kg

  • Tarot 5D3 3-Axis Self-stabilizing Gimbal TL5D001(free shipping)

    The Tarot 5D3 3-Axis self-stabilizing gimbal is specifically designed to carry the Canon 5D Mark III and 5D Mark II camera and perfectly match with Tarot X6 Hexacopter. Its CNC processing with thin-walled structure gives you a stable footage and precise control even in the most difficult flight conditions.The Tarot 5D3 is based on gimbal system with optimal algorithm. Built-in independent IMU module gives you precise and effortless control. Three working modes are supported, orientation locked, Non orientation locked and FPV. Built-in slip ring simplifies the cabling. The command stick controls gimbal rotation velocity. Tarot 5D3 3-Axis self-stabilizing gimbal can be converted into handheld gimbal with quick release handle (the handle needs to be purchased additionally). Tarot 5D3 3-Axis self-stabilizing gimbal is your best choice. Features:1.Working modes-Orientation-locked control-Non orientation-locked control-FPV mode2.Bulit-in independent IMU module3.Tarot gimbal special drive module4.AV output port5.Camera shutter control supported6.Wide range voltage input supported7.S-Bus/PPM/DSM receiver supportedPeripheralSupported Camera: CANON EOS 5D MARK III & 5D Mark II onlySupported Lens Currently: CANON EF 17-40mm f/4L USMGCU Input Power: 3S~6S LiPoControl Requirement: At least four spare receiver channelsAssistant Software System Requirement: Windows XP SP3; Windows 7; Windows 8 (32 or 64 bit)Mechanical & Electrical CharacteristicsWorking Current: 120mA (@25V) 180mA  3S-6S Li (11V-26V)Operating Temperature: -20°C ~ 50°CWeight: 1.51KGDimensions: 215mm*240mm*246mmWorking PerformanceControlled Angle Accuracy: ±0.02°Maximum Controlled Rotation Speed:Pan axis: ±200°/sTilt axis: ±200°/sRoll aixs: ±200°/sRotation:Pan axis control: ±360° continuous rotationTilt axis control: -135°-+45°Roll axis control: ±48°

    Review: Write a Review

    $919.90 $800.31, Save 13% OFF   

    SKU:TL5D001

    Weight: 2.50 kg

  • Tarot 5.8G 600MW 32CH Video TX/RX TL300N for FPV

    Description:- Tarot independent developing TX RX package with 32 frequency point- 600mw 5.8G telemetry system has super mini size and light weight, specially suitable for mini multirotor and QAV quadcopter- 32 frequency points are compatible with normal frequency, providing 1 channel of video signal, 2 channels of audio signal distant transmission, and also providing 5V 1A power supply outputSpecs:- TX5832-600M audio video transmitter x 1- RX5832 AV receiver x 1- 7P color pin x 1- 3.5MM power supply cable x 1- 2.5MM AV cable x 1- Manual x 1TX Parameters:- Net weight: 8.3g (antenna not included)- Dimension: 21 x 33 x 7.5 mm- Working Frequency: 5645-5945MHz- Channel: 4 bands / 32 channel- Channel: 5-DIP switch- Output Power: 27.5 dbm (600mw)- Input Voltage: DC 7-26V (2-6S)- Output Voltage: 5V 1A- Antenna Adaptor: SMA 50Ω- Working Temperature: -10 ~ 60 degrees.- FM Frequency: FMRX parameters:- Weight: 10.9 G (without antenna)- Dimension: 28 x 46 x 40 mm- Working frequency: 5645-5945 MHZ- Channel: 4 bands / 32 channels- Channel choose: 5-DIP switch- Receiving Sensitivity: -85 dbm- Input Voltage: DC 7-26V (2-6S)- Antenna Adaptor: SMA 50Ω- Working Temperature: -10 ~ 60 degrees- FM/PLL Frequency: FM/PLL- AV output: 2.5mm 4 pins AV output- Power input: 3.5mm (exterior) 1.3 mm (interior) DCNote:- Install the antenna before connecting the power to avoid further damage.- Choose proper working frequency and tune the receiver to the same frequency. Please refer to the channel list.- Do not touch the surface of transmitter while operating. It is normal the surface is getting hot.- The input voltage range is between 7-26V (2-6S), do not overload the working voltage.- The output voltage is 5V1A. Please confirm the current and voltage of the camera

    Review: Write a Review

    $51.65

    SKU:TL300N

    Weight: 0.10 kg

  • Tarot 12V 600TVL 2.8mm FPV Camera TL300M/TL300MN

    TAROT custom 600TVL mini HD color camera (FPV aerial camera) with 2.8MM 120-degree whole glass wide-angle lens. Suitable for mini200 / 250/300 mini quadcopter, FPV, aerial photography, monitoring. Small size, built-in Voltage step-down module, can be directly connected with 3S 11.1V li-po battery.Specifications:- Brand Name: Tarot- Item NO.:TL300M/TL300MN- Lens:2.8mm- Camera Angle:120°- Definition: 600TV Lines (HD)-PAL/ 520TVL(HD) Lines-NTSC- Effective pixels: PAL: 720 (H) × 576 (V) / NTSC:720(H)×487(V)- Video system: PAL/NTSC (optional)- Sensitive chip: 1/3 inch HD Color CMOS- Video Output: 1.0Vp-p / 75Ω- Minimum illumination 0.008Lux (ultra low-light)- Power consumption: 40MA ± 10%- Operating voltage: DC5-15V ± 10%- Synchronization System: Internal Synchronization- SNR: >50dB- An electronic shutter (N) 1 / 60-1 / 10000s, (P) 1 / 50-1 / 10000s- Working temperature: 0 degree ~ 45 degree- Usage: Suitable for mini 200/250/300 mini quadcopters.Wiring instructions:- Red DC12V power input connection- Black ground wire connected to the negative power supply and video- White connected AV video signal outputPackage Included:1x Tarot 12V mini HD color camera (21* 26*30mm ± 3mm) 15g (PAL or NTSC optional)

    Review: Write a Review

    $18.99 $15.49, Save $3.50 OFF

    SKU:TL300M

    Weight: 0.10 kg

  • Tarot 5.8G FPV Telemetry Antenna Set TL300K

    TAROT 5.8G FPV 3/4 leaf A/V Tx Rx Wireless Antenna TL300KItem includes:5.8G 3-leaf antenna for TX*1  (Φ33x82mm) 7.8G 5.8G  4-leaf antenna for RX*1  (Φ33x82mm) 8.3GFeatures:Circularly polarized Omni antenna made with pure copper, silvering feeder and RP-SMA connector to avoid signal attenuation, ensure the excellent performance. Light weigh design makes it 7.8g only. The 90 degree connectors ensure the antenna perpendicular to the ground.Specifications: Transmitting frequency: 5800MHz Tx Antenna: 3-leaf Rx Antenna: 4-leaf Gain: 2.0dBi-2.5dBi Standing-wave rate: <1.5 Direction: Omni antena  Horizontal lobe width: 45° Vertical lobe width: 45° Polarization mode: circularly polarized Impedance: 50Ω Connector: 90 degree RP-SMA Material: 98% pure copper Feeder: silvering copper anti high temperature cableSuitable for: TAROT Mini 200/250/300 quadcopters or other similar FPV machine.

    Review: Write a Review

    $8.99 $6.29, Save 30% OFF

    SKU:TL300K

    Weight: 0.10 kg

  • Tarot 5 inch 3-leaf Clover Props Propeller CW+CCW for Mini Quadcopter

    Brand Name: TarotItem Name: 3 leaf Clover PropellerItem NO.: TL300E1(White) / TL300E2(Red) Diameter: 5 inchesRotor Pitch: 4.5Center Hole Diameter: 5.0 MMCenter hole height: 6.0MMWeight: 2.95G / PCS.Matching motor: 1806 Series motorFeatures:Suitable for mini 200-250 Quad and other mini-cross machine to useQuantity:1 pair (CW+CCW)Color:red or white (optional)

    Review: Write a Review

    $2.99 $1.85, Save 38% OFF

    SKU:TL300E1

    Weight: 0.10 kg

  • Tarot Mini 250mm Carbon Fiber Quadcopter Frame Kit w/ PCB Board TL250A

    Description:TAROT Mini 250mini-shuttle is the only integrated frame among the similar products in the market, which could allow the camera, image overlay systems, battery power, power transfer, 5.8G wireless image transmission, antenna, GPS and other electronic equipment to or solder to the PCB board directly, greatly reduce wiring installation, quick and easy.TAROT Mini 200/250/300 shuttl is also the most integrated product among similar products currently, the overall frame uses  thickness 2.1MM pure carbon fiber, with simple support structure,  using 450 tripod extremely ruggedness, low accessories. Rack comes with standard PCB board integrating all electronic product holes on it, reduce fly line interference. Extremely lightweight frame structure to obtain reasonable long life time.Specification:Brand Name:TarotItem NO.:TL250AWheelbase: 250mmEmpty rack height / assembly height: 43MM / 85.8MMEmpty frame length / assembly Length: 195MM / 288MMEmpty frame width / assembly width: 219MM / 315MMBottom headroom: 21.8MMEmpty weight / takeoff weight: 115G / 430GRecommended power combo:click here

    Review: Write a Review

    $32.49 $29.24, Save 10% OFF

    SKU:TL250A

    Weight: 0.50 kg

  • Tarot X6 Hexacopter ARF

    Here comes the Tarot X6 Hexacopeter ARF. Folding arm design on the Tarot X6 reduced the time for preparation before flight. The 4 direction lock folding design with patent make the arm lock on the frame firmly.These are new ARF combo of Tarot X6 Hexacopter at a discounted price. We have tuned everything to ensure every part is well matched and performed. As per our internal test, the flight time can be up to 24 minutes with 6s 10000mah battery (battery not included in the packages). The safe take off weight is under 10 kg. Just enjoy your FPV, let us do the building work for you. The Tarot X6 ARF containes all those small accessories that may be needed for building, and then you do the assembly by yourself.  If you need the different parts to include the ARF, please feel free to let us know.Tarot X6 Build Manual: http://www.fpvmodel.com/blog/tarot-x6-hexacopter-build_show59.htmlItems Included:1x TAROT X6 Hexacopter1x Tarot X series carbon fiber canopy1x Wookong-m autopilot set (recommended, the pictures showed above is with naza-v2)1x DJI iosd mark 26x FPVMODEL MC4012 kv400 motor6x Hobbywing Xrotor 40A ESC4 pairs x 15 inch CW/CCW CF folding prop7x Tarot  prop adapter1x Aomway 5.8g 1000mw transmitter1x SharpVision 7inch high bright led monitor built-in 5.8g dual receiver and DVR1x Boscam 5.8GHz Cloud Spirit Circular Polarized Antenna Set1x Aomway 5.8g 14dbi mini panel antenna1x 12v 3a output BEC1 x Voltage alarmand plugs, wires, cables, connectors, shrink tube etc.Recommended Gimbal: Tarot 5D3 3-Axis Self-stabilizing Gimbal (Not included)Recommended Telemetry Transmitter: FrSky 2.4GHz ACCST TARANIS X9D PLUSNote: Due to the airline regulation, the battery is not allowed to be shipped by air. Therefore, the battery is not included in the ARF package. Thank you.

    Review: Write a Review

    $2,899.00 $2,580.11, Save 11% OFF

    SKU:X6-RTF

    Weight: 14.00 kg

  • Tarot T Series Efficient 1855 Carbon Fiber CW/CCW Propeller Prop TL2848

    Description:- Tarot 1855 Propeller, T Series efficient Pure Carbon Fiber Blade, the roots using a large tilt angle enhance the overall strength and increase the blade effect.  Tarot 1855 Propeller adopt imported carbon content of 100% pure carbon fiber Toray 3K woven,  high temperature and pressure prefabricated precision machining, hardness higher than conventional products market, pros and cons of each pair full carbon fiber trim by artificial pitch are static and dynamic balance, TAROT optimize a series of full carbon fiber positive and negative load-wing propeller efficiency and stability. Full range of Tarot parts for your reference.Tarot 1855 Propeller Related Product ID:- TL2826/TL2827/TL2828/TL2829/TL2830/TL2831/TL2835/TL2840/TL2843/TL2844/TL2845/TL2846/TL2846Tarot 1855 Propeller Specifications:- Efficient carbon fiber CW prop x 1- Efficient carbon fiber CCW prop x 1- Paddle balance Laser Sticker x 1- Weight: 36.5g/PCS- Main hole diameter 4mm, side hole diameter 3mm, center distance 12mm

    Review: Write a Review

    $31.99 $28.79, Save 10% OFF

    SKU:TL2848

    Weight: 0.30 kg




Find us on Google+ Watch us on Youtube Like us on Twitter Follow us on Facebook

Home   |   New Products   |   Multi-Rotors   |   FPV Airplanes   |   FPV Equipment   |   Battery / Chargers   |   Tools & Accessories   |  Site Map

Product Tags: ABCDEFGHIJKLMNOPQRSTUVWXYZ0-9

Copyright © 2015 FPVMODEL.COM®. All Rights Reserved.